DIY Rechargeable LED Torch make using PVC

[@daveslater9141]

That was really long winded but I admire your determination.

[@Viena-qrirwn3jjvgggvjm]

😂😂❤❤❤😂🎉🎉🎉🎉🎉😢😢😮😮😮

[@Viena-qrirwn3jjvgggvjm]

Yeah, yeah, yeah, yeah, yeah, but I did have a twelve hour ago

[@shamsunarefin8301]

Very good work. Specially not soldering the battery.

[@andytipping70]

add a series resistor to limit the current to the leds or they wont last long @4.2 volts - the upper limit to an 18650 fully charged

[@rampatil3055]

kzbin.info/www/bejne/hnelpWWPhr-Nabc

[@kaushikreja]

Construction idea is good. but it's not recommended to lit the LEDs directly from 3.7v cell as it will damage the LEDs soon due to high current drain. better to use at least a series resistance. Best to use a suitable low voltage CC led driver

[@rampatil3055]

kzbin.info/www/bejne/hnelpWWPhr-Nabc

[@RepairingExpert]

Great work

[@dickiamkimgonzales4235]

Nice job, good work

[@rampatil3055]

kzbin.info/www/bejne/hnelpWWPhr-Nabc

[@S-Tach]

You choose wrong led for this reflactor you can make more powerful then this. Nice work.....

[@LahisTechLT]

Thank you, if you can please suggest me a LED.

[@Filip-ej2bu]

That powerbank module have a step up converter so the output is 5v (voltage for charging a phone) you need to add resistors because LED s will heat and eventually burn out

[@shefah85]

I think thats not a powerbank module, thats a lithium battery charger, and the output is 4,3 volt, cmiiw 🙏

[@rampatil3055]

kzbin.info/www/bejne/hnelpWWPhr-Nabc

[@elhuncho2939]

Good wow

[@Factshub785]

What type of wire and what gauge should be. Plz Reply

[@classicshankarshankar9959]

Link give for led reflection with front cover

[@rogertyler3237]

WhynotbUse A standard Led Flashlight Bulb & Socket?

[@alionur54]

module's output is 5v!!! its high for leds

[@nileshwani5737]

ईसमेकि टोच मोबोईलबि जाज करतिहे सोलरवालि पिछे दिखायाथा🇮🇳

[@reena.upadhyay3383]

Hi my name. Aditya Upadhyay

[@Viena-qrirwn3jjvgggvjm]

Hi galaxyeah but I was going to show my birthday maybe somebody be with you Yeah, but then I'm not coming to see sleep witremember me May 15th of we are there. I can't go out of town

[@Viena-qrirwn3jjvgggvjm]

😂😂😂😂

[@Viena-qrirwn3jjvgggvjm]

Ma ma F*** y**, afternoon, Bixby Ou are wearing whatever the majority yard in the artist doll top dial tall

[@Viena-qrirwn3jjvgggvjm]

😂😂😂😂🎉🎉

[@sm07sw06]

gluegun information please

[@sermarangel9337]

Were can buy that kind of pvc?

[@richardsonmedina]

In a hardware store, home Depot, even in Ikea You can get those materials, they re pretty cheap

[@jamaicaguno3782]

How much

[@a1hacks290]

Patalpan jaruri h

[@rogertyler3237]

If I Made a Flashlight I'd Just Charge The Battery's in A Separate Charger.

[@rahulsamajdar6021]

Switch oolta hai and resistor vi lagana chahiye..

[@nileshwani5737]

सिगल बलपका टोच दिखाए पाकिटमे रखने वालि मोबाईलबि चाज कर पासकते अपन🇮🇳चाजिग वालि टोच बिन हत्यरसे बना सकतेहे वसा मोडेल दिखाए

[@nileshwani5737]

स्केल पटि टप से माप बताना मगताथा जो पढरे ऊनके लिए बचोके लिए🇮🇳

[@NoorMushtaq-sg4vu]

Hy. G

[@iAmDislikingEveryShort]

Not good, single mode, too large, still not bright.