Awesome instruction and demo vid. I've been checking a lot of remote down streaming videos and different remote setups. This little build can save DIYers hundreds of FRN's. Thanks a bunch for putting this out.
@srdjannakalamic5856 Жыл бұрын
Best video ever made by far.. This project really saves the day
@MostlyPeacfulRiots3 жыл бұрын
Nice bro, we ended up making one also but we just used a Bluetooth water sprinkler system from a chem tank to an injector then ran the hose line from injector to a split in our wip hose from the real. This saved us alot of money and time, we used the extra cash to buy a 200' of hydraulic hose that has a teflon inner 3/8" line so the Sodium Hydrochloride doesnt break down our hose added a Chem Rated spray gun with 6063 rated aluminum lance we made. This way we not have to worry about replacing anything that breaks down in the injection bypass system itself or the components such as ball valves ect. The Bluetooth timer has a lifetime warranty also 😁.
@allproexteriorservicesllc53383 жыл бұрын
Awesome!! I need to look into that. Thanks
@MostlyPeacfulRiots3 жыл бұрын
@@allproexteriorservicesllc5338 hey can I ask you a question pls sir. I have been trying to remove all the flow restrictions throughout the various components on our setup from pump to tip. We bored out our Unloader, removed a couple filters that bottlenecked the 3/8" line as well. I had noticed the inner part of every swivel we have have ( we have a generic one and a mosmatic one ATM) all of them have a tiny tiny little hole that leads to the ball valve. I dont have a GPM gage but i can tell just from feel when I hook the gun up without the swivel vs with its def stronger with it removed. Im assuming its because of that bottleneck in the swivel so I guess my question is 2 parts.... 1. I this a correct assumption? and 2. If it is restricting flow rate are their any type of swivels that keep a strait 3/8" diameter through the entire swivel? Thanks!!!!!
@geauxbro72 жыл бұрын
That's one of the coolest things I've ever seen honestly, I HATE walking back and forth to pull and drop my stick. I'm gonna look into building it myself but if u sell them, we live in the same state so shipping shouldn't be much 🤣🤣
@allproexteriorservicesllc53382 жыл бұрын
Awesome!! Let me know if you need some help with the build. WHO DAT & Thanks
@geauxbro72 жыл бұрын
Hey man, you still using it today?
@OutlawXOutdoors3 жыл бұрын
Im currently setting up my trailer, not near to what you have, but this video helped me a lot . Definitely subbed. Wavin at ya from Thibodaux
@allproexteriorservicesllc53383 жыл бұрын
Awesome!! Let me know if I can help & thanks for watching!
@ChristopherMaier.3 жыл бұрын
Excellent bro 👌🏽 Much love from Australia.
@allproexteriorservicesllc53383 жыл бұрын
Thanks!!!
@littlespressurewashing2 жыл бұрын
Great channel and video
@allproexteriorservicesllc53382 жыл бұрын
Thanks!!
@travisking43902 жыл бұрын
Awesome video. That is so help full. I like the Davis shooter tips and use one right now too, but I think I am switching to a stainless steal one next year. The Davis ones are aluminum and go to crap to fast, and the steal ones that last longer are the same price practically.
@allproexteriorservicesllc53382 жыл бұрын
It does wear out. I have not been using it much since I added the AR45. Thanks
@DumbCarGuy5 ай бұрын
4 yrs later I see this video. I was watching some of these diy remote setups and now i realize why the other guys put the on/off switch on the side of the box. I was wondering why aren't they putting them on the top of the box. Then i seen you press the button and because its not a momentary switch it says sunk in and can hold water and possibly make the switch go bad is what I am thinking. What do you think about my little theory?
@allproexteriorservicesllc53385 ай бұрын
That is a great theory! Also use the Banjo ball valve as it will last longer. Thanks
@visiblehd51657 ай бұрын
Could you please help me with the battery wire! Like just a link to one or something. I don’t know what gauge to get and I also don’t know if I need a fuse or not on the wire. I also can’t find one of those circle connectors that will fit on the remote part to hold the wire there, they are all to big of circle connectors that won’t fit where you screw it into please send a link of the exact wiring stuff!
@allproexteriorservicesllc53386 ай бұрын
A 14 or 16 guage wire will work. Also, out the fuse close to the battery in the event it shorts out. www.amazon.com/GearIT-Marine-Speaker-Conductor-Electrical/dp/B0CC8HBGM4/ref=sr_1_1_sspa?crid=3HGGRFEORN6SY&dib=eyJ2IjoiMSJ9.LdJ8uetzS6n4n8ppnMVYHrNQB1dEhA37q-TzTUDSbGFg3hPFNQj0TImXL1J-OdTg191wMx7aIVdIcbp58-_PurVmLdCJc4FMhGbiCs4BFfyF0e3periXhmeBkLhj9eZ8YD2cHx2RpFR9aLkiogtE9Hndnf4nJv27WTQDo3Kam0nUx7RSkd1teR5cHTl5meUuGOklnQG9Vv7PgCtRpQipAIyslmWokfuzh8v7jod-GFQ.1OEg9e3QtNzDvIZUs4xn6cCc2DiYVdm9yIQgvMPoCvc&dib_tag=se&keywords=14%2Bgauge%2Bmarine%2Bwire&qid=1709905574&sprefix=14%2Bgauge%2Bmarine%2Bwire%2Caps%2C113&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
@jamesriverish3 жыл бұрын
Great video, thank you for posting
@allproexteriorservicesllc53383 жыл бұрын
Thanks for watching!!
@symplemynd573 жыл бұрын
I just found your videos and must say they are great. I love the build of the remote box. Something that's been burning in my brain for a while and to realize how "stupid simple" it is blows my mind. Good things come to those that wait, like I said, its been on my mind for quite a while. I like that you mention Joe Deery in Ct. I built my truck almost identical to his except I have the GM version. Again, great videos and welcome to my subscription list....👍✌
@allproexteriorservicesllc53383 жыл бұрын
Thanks for subbing and glad you like the content. If you need any help with the remote box, let me know & JD is good people.
@symplemynd573 жыл бұрын
@@allproexteriorservicesllc5338 i ordered up the parts today and should have them on mon-tue. Did you use the brass or stainless? I went with the stainless for a few bucks more
@Recon774 ай бұрын
with this set up other than the electric pump for the soap to the pressure washer hose is there a pump to the remote pump or when its open does it naturally suck as if the switch wasn't there?
@allproexteriorservicesllc53384 ай бұрын
The injector sucks naturally. When you turn it off, he ball valve closes preventing the suction therefore no soap or SH. Thanks
@shawncontreras Жыл бұрын
They make different size on the valve what should inuse fir and GPM
@allproexteriorservicesllc5338 Жыл бұрын
the DS injectors run on 1/4 line. Use a 1/4 valve. Thanks
@DIVEBABY643 жыл бұрын
Can you post a video showing the injector modification. ( taking out the ball and spring etc) Thanks!! I am so enjoying your videos and thanks for saying guys and gals!!! We are out there washing and learning too. Lol😜
@allproexteriorservicesllc53383 жыл бұрын
Awesome!!! I have not got my check valve yet. I plan to modify my general pump injector as soon as I get it. I will post a video hopefully soon.
@KJfreshh6924 күн бұрын
My issue is I have to take off my downstream injector because no matter the tip I use it still continues to pull . I mostly use the m5 twist to apply and to rinse but I have to go back to trailer and turn it off, unhook the injector, hook the jumper hose back to the reel and start the unit then rinse. It’s a lot to do and waste time. I’m trying to figure out what to do to where I can apply SH/soap/degreaser etc.. then rinse
@allproexteriorservicesllc533824 күн бұрын
This down stream box will work & the Flow Pro will work. It has saved us a bunch of time when we were down streaming for sure. Thanks
@chasehaertel3 жыл бұрын
Hey Brother I'm making this as we speak. Can you show a detail picture of the wiring? Thank you so much and I love your videos.
@allproexteriorservicesllc53383 жыл бұрын
Chase, send me a message thru my FB account. facebook.com/All-Pro-Pressure-Washing-Accessories-104510111369317
@AnthonyandEricaConnor Жыл бұрын
You spent under $100? Excellent work
@allproexteriorservicesllc5338 Жыл бұрын
Thanks
@michaelfalgout5564 Жыл бұрын
How did this work? Are you still using it?
@allproexteriorservicesllc5338 Жыл бұрын
It is still on the trailer but have not used it much. We have been using the AR mainly. Thanks
@cfmill7411 ай бұрын
Do you prefer this over a remote downstream bypass injector?
@allproexteriorservicesllc533811 ай бұрын
The remote DS bypass would be a better option. This box is more budget friendly. Thanks
@cfmill7411 ай бұрын
@@allproexteriorservicesllc5338 thanks!
@Syphyllchris Жыл бұрын
The reviews on Amazon say that this valve is garbage... soooooo I mean what's the verdict
@allproexteriorservicesllc5338 Жыл бұрын
It really depends on if you clean it out after every wash. I have had them last a year. The Banjo valve is much better but 3 times the cost. Thanks
@eeiichill3 жыл бұрын
Did you take the ball and spring out of your injector
@allproexteriorservicesllc53383 жыл бұрын
No I did not, but I love the idea. The ball & spring only stop the flow with a higher pressure tip. I may have to try that when it goes bad.
@srdjannakalamic58563 жыл бұрын
Take the Balll and Spring out use a stainless steel check valve in its place.. PM me if you like I'll send you pictures
@allproexteriorservicesllc53383 жыл бұрын
@@srdjannakalamic5856 Please send me details. Thanks
@GeauxHomeImprovements Жыл бұрын
Do I need buffer tanks and bleach tank for this setup to be able to work
@allproexteriorservicesllc5338 Жыл бұрын
No, you can use the drop stick method. Thanks
@blane99062 жыл бұрын
I see where some guys are using 3 way valves to turn on and off soap and allow them to be able to flush out their injector. However, with a remote DS box, is that possible still? I don’t see where/how you can use only a 3 way to hook up to the soap, injector and buffer tank with only 3 barbs. Do you use this or have a pic of using the 3 way?
@allproexteriorservicesllc53382 жыл бұрын
I do have a manual 3-way valve to flush out my injector with water. I have it connected to the SH line & water line and do the flush when done. Hope this helps! Thanks
@Mr10isfreak2 жыл бұрын
Good stuff!
@allproexteriorservicesllc53382 жыл бұрын
Thanks
@pressurekleen3373 жыл бұрын
very nice thanks
@properpreparation32133 жыл бұрын
Nice...Thanks! Question... the red and black wires from the battery connect to what wires on the remote valve? Or do they connect to the On/Off switch (green/black)?
@allproexteriorservicesllc53383 жыл бұрын
Check out my other video. kzbin.info/www/bejne/ooiZY2iZpp2EkMU
@joeybabineaux80182 жыл бұрын
I would love to see how the valve system is connect to your HP hose reel and or hose. I purchased all the parts in your description links. Just missing that one pic, Thanks.
@allproexteriorservicesllc53382 жыл бұрын
If you can hit me up, then I can send you a pic. Thanks
@justinwalsh30102 жыл бұрын
I just put one of these together. My valve makes no sound when I turn it off, I guess I got a bad one. What do you think?
@allproexteriorservicesllc53382 жыл бұрын
It should make a little sound & close the valve. A couple of people reported getting bad valves. Thanks
@justinwalsh30102 жыл бұрын
@@allproexteriorservicesllc5338 did some research. I bought one that needs polarity reversed to close. The one I need, that is normally closed until power on is part number JFMSV00027. Maybe this will help someone else.
@nick321413 жыл бұрын
Not sure how long you’ve been using this for but I’m sure that you rinse it after every use from the SH. How has it been working? Any problems with the ball valve?
@allproexteriorservicesllc53383 жыл бұрын
I have been using for like 6 months with no problems. I know at some point the valve will fail with SH, but I rinse the ball valve every time.
@nick321413 жыл бұрын
@@allproexteriorservicesllc5338 Thanks
@HouseWashingRick3 жыл бұрын
I can't wait to get my box and start using it
@HouseWashingRick3 жыл бұрын
How does the ball valve get rinsed out after pulling sh ???? And does the chemical injector get rinsed out still
@jacobwinchell85213 жыл бұрын
Nice build, thanks for sharing the links!
@allproexteriorservicesllc53383 жыл бұрын
You are welcome!! Thanks
@ckohl97602 жыл бұрын
Could you also use a 3 way valve so that when you click the remote you are just switching back and forth from sh to clean water? Yes you would have to run two lines from the ball valve, one to clean water and one to sh tank. That way every time you rinse it also rinses the injector.
@allproexteriorservicesllc53382 жыл бұрын
Yes, that would be the ideal solution. The challenge is finding a 1/2" 3-way electric valve. Thanks
@rickwashek4783 жыл бұрын
That's the most efficient set up I have seen. I am going to do the same set up for this year. Thanks for sharing.
@allproexteriorservicesllc53383 жыл бұрын
Thank you!!
@KevinR97632 жыл бұрын
I see on your pressure washer you have a bypass, did you just cut off the hose, so when off the gun the water just shoots on the ground? Do you have a video of what you did?
@allproexteriorservicesllc53382 жыл бұрын
My bypass line goes back to the buffer tank. Check out this video on the build. Thanks kzbin.info/www/bejne/lZmvXoeLjNZjoc0
@rpcpressurecleaningandsoft25353 жыл бұрын
How did that work out
@allproexteriorservicesllc53383 жыл бұрын
Works great and still using it!!
@blakenasser7166 Жыл бұрын
Do you still use this or do you have a flo pro now
@allproexteriorservicesllc5338 Жыл бұрын
We use the AR45 for house washing now. But it still on my trailer. Thanks
@Truprosoftwash3 ай бұрын
Hi, my remote receiver is tripping when I hit the on button on the remote. Any thoughts?
@allproexteriorservicesllc53383 ай бұрын
It sounds like a short on the power cable. Thanks
@Truprosoftwash3 ай бұрын
Cool thanks!
@davyonedickerson17867 ай бұрын
Will this work with a ar45
@allproexteriorservicesllc53387 ай бұрын
I would recommend a 3-way for the AR45. You may be able to use this style in 1" on the SH valve, but then you would also need one for the soap line. Thanks
@davyonedickerson17867 ай бұрын
@@allproexteriorservicesllc5338 I just brought a 1in 3 way wat else do I need
@dirtynewschannel3 жыл бұрын
Just did a random search on this topic to make sure my thinking on these steps was correct before I started wiring and mounting. Cool that you had all the same pieces but I’m adding a flashing light also. Great video and enjoyed seeing the boards on the wall!
@allproexteriorservicesllc53383 жыл бұрын
Awesome!!! I thought about adding a light, but most times I cannot see the box. The boards are from my younger days!! Good times and ride every now & then. Thanks
@dirtynewschannel3 жыл бұрын
@@allproexteriorservicesllc5338 Yeah I don’t think I’ll be in line of sight of the light either but if didn’t get it I’d think about every time I am in sight of it!
@bradrichards61072 жыл бұрын
Good Job, Sir. How has the valve been holding up? I am thinking of building the same set up.
@allproexteriorservicesllc53382 жыл бұрын
The US Solid valves have held up around 6-8 months. I switched to the Banjo valve and it seems to be holding up better. Thanks
@palmtree86043 жыл бұрын
🌴 love the sk8 boards on the wall🌴
@tonycalabrese84383 жыл бұрын
Thank you! This helped me out so much!
@perezleolp Жыл бұрын
Very good video bud...I'm trying to hook up a 3 way valve wood the wiring be the same the one I got coming is 3 wire
@allproexteriorservicesllc5338 Жыл бұрын
It should be close. Not sure of the connections on the 3-way valve. Thanks
@perezleolp Жыл бұрын
@@allproexteriorservicesllc5338 I think I messed the valve says it works with 110 through 230v AC
@davianjustinescherer2 жыл бұрын
Subscribed .. THANK YOU SO MUCH!!
@allproexteriorservicesllc53382 жыл бұрын
Anytime!!
@frankpirrone60322 жыл бұрын
My ball valve is working opposite as it should. Valve is open without power and closes when I hit on
@allproexteriorservicesllc53382 жыл бұрын
Try reversing the wires. Thanks
@frankpirrone60322 жыл бұрын
I bought a Normally open valve instead of a normally closed valve. It’s simple to convert the valve either way by just flipping the gear. It works perfectly! Thanks!
@allproexteriorservicesllc53382 жыл бұрын
@@frankpirrone6032 Good to know!! Thanks
@rickrouse97162 жыл бұрын
@@frankpirrone6032 how did you flip the gear? I too ordered the wrong one and chased air leaks through a new blend manifold and pluming trying to figure it out. I finally pulled the hoses off and the barbs and saw I had ordered the normally open valve so when I powered it to draw chlorine and soap I was actually closing it. I ordered the other normally closed one. I did not thin about reversing the gearing …
@frankpirrone60322 жыл бұрын
@@rickrouse9716 it’s pretty simple, here is the video the manufacturer sent me when I contacted them. kzbin.info/www/bejne/iqKzZIywf8aKmKM
@ecswashingtonllc59042 жыл бұрын
How long does it last, also will you still need the downstream bypass for stronger flow when rising?
@allproexteriorservicesllc53382 жыл бұрын
With the US solid valve, I have gotten 7-8 months out of the valve. The Banjo valve is still going strong after a year. You don't need the bypass, but it does help. the Flo Pro unit is set up to work with the bypass. Thanks
@dcsc48952 жыл бұрын
@@allproexteriorservicesllc5338 can you throw the banjo valve link up brother? is it just a 1 part swap or do i need a different motor assembly ? thanks man
@allproexteriorservicesllc53382 жыл бұрын
@@dcsc4895 It is a direct replacement. www.jmesales.com/banjo-1-2-in-polypropylene-on-off-electric-ball-valve/?gclid=CjwKCAjw682TBhATEiwA9crl38SkmvLbtu2mmTofgKONt9UC5H8dH5M1U4XigzSF2Kw4pax-73I8fhoC9d4QAvD_BwE
@JDMSoftWash3 жыл бұрын
Just got mine done works great thank you.
@allproexteriorservicesllc53383 жыл бұрын
Awesome!!! Make sure you rinse it after every use.
@JDMSoftWash3 жыл бұрын
@@allproexteriorservicesllc5338 thank you so much.
@michaelgordon38903 жыл бұрын
Did you have to use a relay
@allproexteriorservicesllc53383 жыл бұрын
No sir. Did not need the relay with the two wire ball valve
@stevenwest10253 жыл бұрын
Amazing thanks for the info ! Total game changer!!!
@allproexteriorservicesllc53383 жыл бұрын
Anytime!! Don't forget to rinse the valve and cycle the valve when rinsing. Thanks!!
@joseluis85733 жыл бұрын
The valve is solid is ok for bleach?
@allproexteriorservicesllc53383 жыл бұрын
It is will with SH, but you need to rinse it. Thanks
@powerfulimprovements3 жыл бұрын
Life saver!!!
@Hamrickshighpressuresolutions3 ай бұрын
I just made the same one. Do you happen to have a video of it in action on a job
@Hamrickshighpressuresolutions3 ай бұрын
Great video
@allproexteriorservicesllc53383 ай бұрын
There are some videos after this one where the box is in use. Works great for the price. Thanks
@quentinrogers38683 жыл бұрын
I ran into a problem. Can I email you or call you to get help?
@allproexteriorservicesllc53383 жыл бұрын
Hit me up and I will see if I can help.
@quentinrogers38683 жыл бұрын
I inboxed you from Fb messenger
@Truprosoftwash3 жыл бұрын
Nice thank you!
@allproexteriorservicesllc53383 жыл бұрын
Thanks for watching!
@Truprosoftwash3 жыл бұрын
@@allproexteriorservicesllc5338 you building them and if so how much?
@robertgreen2412 жыл бұрын
Is there anyway to run 2 lines 1 to SH and the 2nd line to soap? Or do you have to Bach mix?
@allproexteriorservicesllc53382 жыл бұрын
With this set up, I just added soap to my SH. Not sure if you could run separate line. Thanks
@robertgreen2412 жыл бұрын
@@allproexteriorservicesllc5338 ok thank you for your reply. God bless and continued blessings
@HouseWashingRick3 жыл бұрын
Sir I have all the parts in your video. Do I need to buy any wiring to get it started. And what will it cost if I mail it to you to put together for me ???
@allproexteriorservicesllc53383 жыл бұрын
The only wire you will need is from the battery to the box. You can use a 16 gauge 2 conductor wire. I do build them if interested. Thanks
@HouseWashingRick3 жыл бұрын
@@allproexteriorservicesllc5338 if I mail it will 150 cash would that get it built plus a extra 20 for shipping
@allproexteriorservicesllc53383 жыл бұрын
@@HouseWashingRick Sure. Let me know.
@HouseWashingRick3 жыл бұрын
@@allproexteriorservicesllc5338 I can mail it to you first thing Tuesday morning if you like
@HouseWashingRick3 жыл бұрын
@@allproexteriorservicesllc5338 actually I'm waiting on the on off button that's only thing I'm waiting on from Amazon should be here Tuesday.
@jeffellis73482 жыл бұрын
how is holding up since youve had it a while now? thanks
@allproexteriorservicesllc53382 жыл бұрын
It is still on the trailer & doing well. Just note I did change from the stainless to the poly valve but worth the extra expense. Thanks
@jeffellis73482 жыл бұрын
@@allproexteriorservicesllc5338 Thanks for the quick response.
@rcl7003 жыл бұрын
Are you using 18g wire to power the box?
@allproexteriorservicesllc53383 жыл бұрын
I am using 16 gauge wire. Thanks
@rcl7003 жыл бұрын
@@allproexteriorservicesllc5338 thanks Sir
@J7innovation2 жыл бұрын
How much for you to put it together? Thanks
@allproexteriorservicesllc53382 жыл бұрын
I have not been building them lately due to time. Maybe in the winter if it slows down. I will let everyone know. Thanks
@waytruthlifedisciple2 жыл бұрын
@@allproexteriorservicesllc5338 I'd be interested if it's pretty soon.
@AutoDudes3 жыл бұрын
Is this still working good for you?
@allproexteriorservicesllc53383 жыл бұрын
Yes sir. Thanks
@AutoDudes3 жыл бұрын
@@allproexteriorservicesllc5338 thanks for the reply, just bought it.
@bryankaczmarek69432 жыл бұрын
How would you add a light to this ?
@franciscomaldonado57243 жыл бұрын
Good video good information
@jasonward6273 жыл бұрын
Dose it matter on GPM with this?
@allproexteriorservicesllc53383 жыл бұрын
No sir. Should work with any GPM that uses an external injector. Thanks
@jasonward6273 жыл бұрын
@@allproexteriorservicesllc5338 Did you run the main power wire to your pressure washer battery or do you have a separate battery for this? Thanks aging for your help.
@allproexteriorservicesllc53383 жыл бұрын
@@jasonward627 I run the to same battery for my pressure washer. Thanks
@srdjannakalamic58563 жыл бұрын
Can you give us an update on how the remote is holding up for you. Also do you think using A38 hose Would give you more flow for chemical.. Great video thanks
@allproexteriorservicesllc53383 жыл бұрын
The box is holding up great. I always rinse after every job. A 3/8 hose would choke the 5.5 GPM pump. Thanks