DIY RF Transmitter and Receiver | How RF Transmitter and Receiver Works

DIY RF Transmitter and Receiver | How RF Transmitter and Receiver Works
In this video we will learn how we can make a RF transmitter and Receiver module for our various applications like robotics and home automation. watch the video till end & if you have any doubt or any suggestion feel free to comment in comment box below.
For more videos subscribe to this channel and press the bell icon for personalized notification for every new video uploaded.
Link for previous video : • How IR Sensor Works | ...
Link for related videos :
how to make perfect solder tracks on zero PCB : • How to Make Perfect So...
---------------------------------------------------
Links for Components :
RF Module : amzn.to/3cOhrjD
Encoder and Decoder IC (HT12D & HT12E) : amzn.to/3cNeEaw
ON/OFF Switch : amzn.to/39Ciq4w
voltage regulator 7805 :amzn.to/39QBrQI
------------------------------------------------------------------
Like | Subscribe | Share
like our page on facebook : / teknoistix
#Teknoistix
#DIY
#Amanpreet_Singh

[@aayush1206]

gazab explanation very nice

[@TEKNOISTIX]

Thanks

[@shinumansuri7120]

kzbin.info/www/bejne/d4DQgIWfr66mfbc

[@tnamen1307]

@@TEKNOISTIX Sir, please make video showing the working of this IC EM78P156NM. It is used in many third party CAR REMOTE CENTRAL LOCKING SYSTEM.

[@rameshbhaihirani9679]

Matiriylmaganekeliye

[@surajgupta0023_]

sir aap aise hi yogdaan dete rhe , aapke jaise koi nhi samjha skta koi kudos

[@siv3552]

बहुत अच्छे और सरल तरीके से समझाया आपने बहुत-बहुत आभार

[@amitabheer]

This channel deserves to be the leading one. Lets do our efforts to make it grow. Superb tutorials.

[@vishalpassi864]

Sir yeh vedio dekhna se phela tek me sochta tha ki ic smjna mera bs ki baat nahi h iss vedio ke baad mujeh legta h me koi bhi circuit design krr skta hu because ic is a very important topic in electronics and you made it so easy to understand. Thank-you very much You made my day 👏👏👏

[@kpssandhu1790]

Sir itna badiya explain koi nahi kar paya or bhi Hindi may good sir

[@TEKNOISTIX]

thanks

[@harshitpandya3276]

thank you sir bohot ache se samjhaya pura 👍🙏❤

[@amitabheer]

You made me "Speechless". Thank you for your all rounder DIY Electronics videos. Zabardast. I had already constructed the same ( 3 set of circuits@433 Mhz with different address locks) but range is just couple of meters. Kindly suggest how to improve its range. PS: I wanted to use the same for three door bells, one for each floor but due to low range none is working. Kindly advise. Thank you in advance.

[@malikarshad577]

Sir I impressed your knowledge, you are Great & explain deeply. Thanks you.

[@sanjaybatra6593]

Your teaching method is better then other videos, I saw on same topic. 1. Do you have something different on this topic? I mean can you explain circuit diagram of Transmitter and receiver module? 2. Which IC is used for transmitter and receiver ? 3. ASK 4. About Antenna 5. I don't know much about it , but I think there are two options available for Encoder and Decoder ? Either use hardware like HF12D and HF12E with transmitter and receiver module/IC or Use a small microcontroller with library for ASK. Need your point of view on this .....? Can you please share a link on.......How to make transmitter and receiver module ?

[@DiveshKumar-ws9bq]

Kass sir ji aap phley mil jatey to aaj me ek electronic engineer hota gajab ka sikhatey hai aap thank you❤❤❤❤❤❤Dil se

[@csgupta7017]

Sir bahut videos dekhta hoon but your way of explanation is very very best.

[@shibin.c.s3473]

Explained in simple and understanding way. we appreciate your efforts. Thanks

[@TEKNOISTIX]

Thanks

[@harryyadav2190]

@@TEKNOISTIX can we connect motor to it

[@TEKNOISTIX]

Yes with the help of motor driver

[@kumarjakke]

आप का वीडियो काफी useful है। Reference के तरह use करसकते है। धन्यवाद।

[@TEKNOISTIX]

👍🏻

[@mahammadrafikiresur8976]

Very useful video. What is the range between transmitter & receiver? How to increase the range? Please explain.

[@TEKNOISTIX]

About 10 mtrs

[@ananddassa2017]

sir ji resister 1 bataya hai aur waha per theen hai diagram miljata too achata nice video good information thanks for video

[@gautamghosh5714]

Sir, please make a home automation project using this RF module.

[@TEKNOISTIX]

Ik I ll do it

[@niteshkumar027]

kzbin.info/www/bejne/h3y3dp6rjbKrgNU

[@tnamen1307]

@@TEKNOISTIX Sir, please make video showing the working of this IC EM78P156NM. It is used in many third party CAR REMOTE CENTRAL LOCKING SYSTEM.

[@hariprasadgowdakerenadka8450]

@@TEKNOISTIX can I use like toggle

[@TEKNOISTIX]

Yes

[@cartoon4u684]

Thousands of like from my side. Just amazing explantion , to the point and detailed . Just perfect . Please keep this type of videos it will help many students a lot . 👍👌👌👌

[@TEKNOISTIX]

Thanks

[@Danny-sl1ej]

Please use this project for home automation project… good job… i see your videos …. And i support you

[@TEKNOISTIX]

Thanks Home automation video : kzbin.info/www/bejne/f6m6eYSrbbpsqpI

[@negiysi3643]

Lovely One... I just happened to check your video & i was surprised to learn a lot about it... Keep it up!!! Good job..

[@dcreate5993]

Hey !! Señor I'm from Sri Lanka, Your explain procedure is very good i don't speak Hindi but i could understand this Thank you !! very much And subscribed.

[@roseelectronics4582]

Nice tutorial! Happy to see the channel growing so fast.

[@TEKNOISTIX]

Thanks Its all blessings of brothers like you.

[@umargul5644]

Great job sir thanks a lot

[@aijazahmed9113]

Nice is instresting explained, l am also instresting home automation and different projects thanks.

[@madhabmurmu8437]

Thank u sir clear samjhane ke lie

[@vrushaliwaghmare332]

Thanks Sir, This information helps me in my academic project for making Remote control robot👌

[@nimishghule]

Thank you. I'm working on a project and I needed this video❤

[@yogvinod6154]

Very good way to explanation about ckt working with practically.thankyou

[@vedantjagtap5801]

sir voh transmitter and receiver module kese work karta hai uspe bhi same video banado .....plz .thank for such beautiful explanation .❤❤👌🙏

[@NOOBSQUAD5375]

Please sir Home Automation module Banakar dikhaiye is circuit se Mujhe aapki video Ka Intezar rahega aap bahut acche se samjhate Hain pahle aap English mein samjhate the thodi bahut samajh Aati Thi Hindi mein bahut jyada aasani se samajh Aati Hai thank u for shifting Hindi language JAI HIND

[@TEKNOISTIX]

already done Chek the next video

[@Ram1947S]

Behut accha video. Dhanyabaad apko.

[@NeerajKumar-po6gh]

इन modules पर जो ICऔर components लगे हुए हैं उनको भी explain कीजिए धन्यवाद sir

[@lachhmandasskalsi1313]

Very good explaination

[@narullah69]

Sir give us tips how to make long range transmission

[@actionfire3196]

You made it so simple. You are the best

[@TEKNOISTIX]

Thanks

[@sasipanakal4458]

very good explanation

[@poonamchand]

Thanks for such valuable information

[@ashoksafaya5397]

Yes project for better understanding needed,thanks.

[@srinuvas2826]

Very very good explanation Sir, Thankyou very much...

[@pradeepmahadaye5327]

Your explanation very nice

[@joshitoshi9835]

Thanks for the detailed tut, really appreciate that. Will you teach us how to send sensor data like temperature and distance meter and show it on lcd connected with receiver? Can we do it without using arduino or any controller? if no than teach us how to do that using any controller. thanks

[@NasirulHuda]

Very helpful video, thank you.

[@brilliantacademy5227]

i had made this project it is successful thanks for uploading video can u tell me what is range it will work how to make antenna pls let me know

[@adeshmore22]

Thak u so much for your explanation

[@shhyder]

Very well explained, very thankful of your effort.

[@abcdshikor998]

that's a very clean explanation, thanks a lot

[@faizanchunawala8407]

Thanks you sir don't stop your work

[@JayaramR-Irinjalakuda]

Excellent presentation

[@thattalathvelayudhanrajan1082]

Good presentation

[@tuhinkarmakar554]

Thank you

[@techycharles]

What is the range of it?

[@simpleproject6848]

Mene iske output pr l293d ic and transistor dono use karke dekha but speed slow h lekin motor ko direct 5v ya 3v current dete h to motor ki speed jayada hoti h. Kya aap bta skte ho ise kese solve kre ?????

[@mrkawshik206]

Can you please make a video showing how to invert that voltage coming out from ht12d and use it for running Motors

[@anontoakanda5847]

Thank you brother For making this video..😍😍

[@TEKNOISTIX]

👍🏻

[@saadzaki1658]

Excellent work👏. Your way of teaching is great

[@TEKNOISTIX]

Thanks 😊

[@planker]

Excellent Video. my question. How did you calculate the "Rosc" ? you have 1M and 47k with 5v. The transmitter can run 9v for high power. So can I tap the 9v before the 7805? This will power the TX on 9v and the 12E on 5v. what do you think?

[@chethanr7670]

You are underrated

[@Gurdevkhosa]

Very nice explanation bro....I want to add a relay.... what will be the connections...

[@sambathkumar3702]

Dear Brother. I want to transmit a sound signal music /speech using the same circuit is it possible and what with be the range of the transmitter unit. Pl reply. Your 0 to 30 v 10 amp variable powrrsupply circuit really good very good explanation good luck.

[@sukhenrajbanshi5658]

Brother sound signal transmission hooya hai quality kaisa hai

[@shekargowda6090]

Good for knowledge

[@balram.bhalke99984]

Very nice explained thanku I want to operate 12 volt dc

[@yogmayjivan9983]

Sir Very Very Nice explanation

[@dvlravindran]

Thanks for sharing this nice video. Could you please share a video on wireless HDMI transmitter DIY project?

[@pandeyrahul999]

Sir esp32 ko complete batayiye na Automation Aap explain bahut achchha krte ho 😍😍😍❣️❣️❣️🙏🏻🙏🏻🙏🏻🙏🏻

[@RanjitSingh-ys6ht]

Superb explanation

[@linkywebcom]

You are the best bhai thanks a lot

[@JalajGautam-qn7wi]

very well explained

[@DiyElectronic]

Nice Video Sir Ji 😀 Try to give different different reactions in your thumbnail... Like How, What, Why, Working, More 😃 I hope you understand. What do I want to say?

[@TEKNOISTIX]

Thanks

[@trilokkarki2736]

Sir please tell how to increase it's range and tell which factors decide the range of the module

[@NatureTabby]

Please English subs sir. because of your knowledge is very important to worldwide student. Thank you your commitment ..

[@TEKNOISTIX]

I ll do Thanks

[@VEERsciencePROJECT]

Good job

[@Visionary_]

Wonderful sir

[@usmanriaz8396]

bot wadiya sardara , chaa gya

[@TEKNOISTIX]

Thanks 😊

[@abhinavyadav9637]

Sir please make transmeater range 500 to 600 neater range

[@HarshJatt]

Bai g bohat badia information diti aa Pr eh video menu 4 saal pehla chahidi c jado me toy tractor banoda c Waise thoda kam bohat badia chal reha

[@TEKNOISTIX]

Thanks Chlo thode nai ta hor kise de kam aa jaye gi Ave sharevkar deo je thonu lage k kise de kam aa sakdi hai

[@HarshJatt]

@@TEKNOISTIX hanji jaroor

[@narendramankame7967]

Sir Please show us. How to make bench power supply (0 to 30 volt / 10 amp)

[@TEKNOISTIX]

My next video is based on that... Wait for next Monday

[@MohamedAli-fn8kh]

Super ji thanks

[@TEKNOISTIX]

👍🏻

[@evilgaming9260]

Garda explanation 😮😮😮

[@swaransingh2118]

Best presentation ❤

[@ritupatil6507]

THANKYOU SIR AND ITS HELPFULL

[@SharifKhan-kt3hq]

Sar aapke pure video mein bahut bariki dekhta hun ek video aap overload gharelu protection wala koi simple circuit bataen taki kiraedaron se bahut pareshan hai room kirae se diye hue hain aur vahan per overload item chori se chalate Hain main chahta Hun ki aap Aisa circuit bataen Jo load per line ko kat kar de

[@shafiquesayed2673]

Thank you very much very informative video

[@TEKNOISTIX]

Thanks

[@Bablu-ko2vz]

Nice sir ji

[@rahulrajapara8340]

Ek sath 2 rf module chala sakte he ? Alag alag circuit pe

[@TonyStark-xg5vi]

SIr you are doing a great work.🔥 Nice explaination

[@navitkumar9537]

Very Good video.

[@irfanjalal2010]

Excellent Sir !

[@swarnimsharma_001]

Asli sir ji

[@SritamKarmakar]

Osilator mai koivi resistances value use kar sakte hai kya sir...?

[@sagarkumbhar6385]

Very nice explaination bro. Please make video of home automation using this rf module. Very nice content & best of luck 👍

[@MANISHINVENTION]

Sir iski range kitne meter hai

[@TEKNOISTIX]

About 10 mtr

[@LavanyaSharma-sm9pv]

Sir isme led ki jagha motor bhi laga sakte hai

[@Bhavuk_Varshney]

Can i make it for wireless ignition for firecrackers?

[@shortsvideolover3315]

Sir hum iss encoder and decoder ic ko ir transmitter with receiver mai use kar sakte hai kiya....

[@Vidya1939]

Liked very much tks a lot, in the part list u said RF MODUL but They R trans receiver, u mean they R RF modules I mean to say Tx & Rx module part number Sorry I visited Amazon , they R In pair sorry ignore

[@sambathkumar3702]

Sir, What is the max range of the transmitter is it possible to extend the range. Can we transmit sound signals using only the transmitter and receiver pcb unit by feeding data to the transmitter datain pin and recieve the same on the out put of the reciever out.

[@TEKNOISTIX]

It ranges about 10 meter It cannot be used for sound signals

[@vigisbigtm]

Very nicely explained. Great work sir, keep it up!

[@tarakashyap1336]

Sir relay laga sakte hai kya isme jisse koi bhi fan ko chala skate h

[@kamleshchavan7451]

videos on RF transmitter and receiver module circuit diagram working explanation step by step ( which u have used in this video) , related topics required for designing our own RF transmitter and receiver module circuit which can be used for RC control toys etc. Can u please help me , guide me I'm seriously interested in designing our own RF transmitter and receiver module circuit which can be used for RC control toys. Guide me please🙏, what all topics should I study to achieve this knowledge, I'm sure you'll help me sir

[@techinfotahir7912]

Very nice 👍🙂 project. Please make a vedio RF 🏠 home automation 4 channel 100 feet range

[@TEKNOISTIX]

I have made the home automation system with this transmitter and reciver You can watch that video Concept will remain same with 100 mtr system