DIY Rip Cut Guide / Workbench Build Part 2

This is the second video in the multi-function workbench series. In this video I’m going to install the benchtop and make the cutting station.
Rip Cut Guide Plans: bit.ly/3l9Juej
Multi-Function Workbench Plans: bit.ly/39eKtrr
Rip Cut Guide Blog Article: bit.ly/39knNWI
Multi-Function Workbench Playlist: bit.ly/3AUePvq
This video was sponsored by manomano:
www.manomano.e...
Modular Workbech Plans: bit.ly/2V1VzaS
X-Motion DIY Portable Mortiser Plans: bit.ly/3fT7lQE
Band Saw Plans: bit.ly/2JisRjf
T-shirts and Stickers: bit.ly/2RMYDET
Follow:
/ paosonwoodwork
/ paoson_woodworking
/ paoson_woodworking
#woodworking #homemade #workbench #plywood

[@Paoson_Woodworking]

Workbench Rip Cut Guide Plans: bit.ly/3l9Juej

[@andrew9409]

NICE WORK!!!! Couple of questions: if I buy the plans, do you take American currency? Do you have plans for the bench in inches and feet? Also, I don't know if I can get the laminate top that you have, so what are the dimensions just in case I have to make my own laminate top?

[@aquagio9394]

Dieser Mann ist einfach nicht normal woher die ganze Ideen holt 😳 ich gucke mir die videos an mehr Mals um zu verstehen wie und warum. der ist zu schlau einfach krass und top Arbeit 👍🤌💪🏻 weiter so

[@clydedecker765]

Love your designs and ingenuity. Many of your "machines" are built by you - not purchased. A true "maker".

[@Paoson_Woodworking]

thanks!

[@bwillan]

Matthias Wandel would give a tip of the hat at your level of engineering and craftsmanship in making your own woodworking machines. That 3D router looks very functional.

[@kevincoates1597]

I don’t say this often, but you’re a genius man. The level of engineering that went into your workshop is MIT level brilliant. Wow.

[@RideAlongside]

Kevin Coates My head hurts thinking about how he must think before designing all of this.

[@Bushmen918]

My thoughts as well. The planning coupled with great editing A+++ . Subscription more than earned.

[@cassidypoboxcom]

Absolute brilliance! Love your work and ability to show us how you have done things! Thank you

[@ALLWORKNOPLAYnetwork]

This is above of the woodworking hall of fame.

[@christianfischer3085]

probably the best workbench with a lot of functions here on youtube!!!

[@yamantarakji]

dude every tool is hand made (the band saw & the disk sander, the plunge router, the portable band saw and the list goes on... ) , this is incredible

[@Paoson_Woodworking]

Thank you!

[@jonov1100]

This guy is a magician! He can conjure anything out of wood!

[@ToffeenoseToffeenose]

You are not human man. NASA have robots that can’t work to your accuracy and quality. Another awesome build

[@BYYoseph]

His workshop looks like a little slice of heaven to me. This guy is a real craftsman..even his jigs you can tell he takes pride in his craftsmanship.

[@Paoson_Woodworking]

thanks Mate!

[@bg73]

The amount of money you've saved yourself by building your own machinery is amazing, but the amount of ease you've created for yourself by your ingenuity is brilliant. Well done.

[@Paoson_Woodworking]

thanks!

[@porthose2002]

I feel like every video of yours that I watch I have to watch multiple times just to get the basics of everything you're doing. There is so much skill, content and ideas in each of these videos it's staggering.

[@Paoson_Woodworking]

thanks John!

[@НикАс-д5ь]

Вы мастер своего дела! Я восхищен вашими работами!!! Вижу что вкладываете душу в каждый шаг изготовления устройств и вспомогательных приспособлений! Я горжусь вами!

[@АлександрВладимирович-к2р]

Your videos are something,I always wait with pleasure,you are a great master,I wish you success and new projects.The workbench is just super.

[@Paoson_Woodworking]

thanks mate!

[@jdrakulich789]

Your woodworking skills are top notch! I love the precision and detail.

[@2000bvz]

Wow. This is fantastic. I'm going to have to watch it about ten more times till I wrap my head around it completely.

[@Paoson_Woodworking]

thanks!

[@johnfrederickson3082]

YOU ARE IN A CLASS OF YOUR OWN, YOU ARE TRULY GENIUS! I think all of us would just like to talk to you sometime just to see if we could take in some of your insight. Congradulations and keep it up.

[@lylefailes4476]

I really love the way you've 'engineered' almost all your shop machines and benches. Well thought out and sturdy. I must say you really need to use safety glasses if not only to protect your eyes at least to set a good example for your viewers. Your eyes are the most valuable organ in this profession. Without them we cant have more videos from you. Thank you for your builds and videos.

[@beyondsurreal9782]

maybe he doesn't need it cause his dust level is down to near minimum and his his extraction game is solid !! :)

[@morskakumara1003]

Damn, this is such an awesome project. That 3D router/drill tho, next level! Props!

[@christopherjessngo629]

As always your take on things is way above the other i've seen great job man.

[@x-ray8539]

One video, tons of informations , different techniques and good ideas for our shops... Great job man! You earned a new subscriber.👍

[@LostWhits]

I enjoy watching your methods of dealing with problems/tasks. Loved the mobile drill press and drawer runner counterbalance. Thank you.

[@Paoson_Woodworking]

thanks!

[@gianlucasalvador3691]

I am following you almost from the beginning, actually when you published the portable workshop video. There is an impressive constant in every project you do, none excluded, which is the high level precision in each single step of your process combined with the apparent simplicity that you make it seems... And, on top of that, you use almost always tools that you have built by your own... It's astonishing... I am speechless every time!

[@Paoson_Woodworking]

thanks Gianluca, it's always a pleasure to see you here!

[@jorgecinelli6706]

Sigo viendo el taller màs hermoso que he visto,en estado de depresiòn,estoy "tratando" de hacerme un tallercito en un departamento de dos hambientes,imaginate si no me voy a deprimir,ya no quiero seguir tratando,pero igualmente es hermoso saber que hay alguien en carpinterìa que llegò a la perfecciòn,felicitaciones eres el carpintero màs centrado del mundo.

[@robjeffrey7544]

Awesome. Looking forward to building my own. Love the concept of using plywood dimensions for mortise and tenon. Great stuff!

[@wcwhitecold7215]

Хорошая работа! Порядок на рабочем месте! Перфекционизм во всем. Удачи в проектах.

[@Normambo]

Got to say, you're the Russian Birch Plywood (RBP) Master. Absolutely great ingenuity not only in the design of the workbench but in all the tools you've built. I'm an avid utilizer of RBP constructions but this video series got me pumped for a much higher level. Thanks for making these videos. Normand from Montreal, Canada

[@oglaucio]

What a series of brilliant ideas. Congratulations!

[@Paoson_Woodworking]

thanks!

[@djxxxplicit]

Engineering and workmanship at it's best!

[@angel1138thx]

Gran trabajo y muy bien realizado eres muy metódico y trabajas con mucha limpieza y claridad mi enhorabuena, una cosa mas, y creo que hablo en nombre de muchos, sería de agradecer que hicieras algunos de tus vídeos en español, muchas gracias por compartirlos saludos desde Madrid.

[@Paoson_Woodworking]

gracias como siempre Angel! Recuerda que puedes activar los subtítulos en español

[@l.rod2827]

Absolute Craftsman, truly enjoyed watching both videos. Awesome workbench.

[@deanwilliams93]

After watching the entire build I find this a well thought out build. I have said on Paul Sellers Wood Working Bench build of birch plywood, someday I'll live close enough to a place where nice birch plywood is less than a day away.

[@huffster6344]

Another benefit to using oil on the workbench surface is that it doesn't make it slippery like varnish can. Great video.

[@christofix]

This workbench is the best i have ever seen. this video give me inspiration for my own workbench because i have to rebuild my old one

[@Paoson_Woodworking]

thanks mate!

[@christofix]

@@Paoson_Woodworking Your welcome. This video is very helpful for me. Thanks again! i hope i can start soon on my workbench. I'm going to make a video of it. Can i refer to this video? I want to show my viewers where i got my inspiration!

[@Paoson_Woodworking]

of course, send me some photos!

[@christofix]

@@Paoson_Woodworking Thank you so much for that. I will start the building in a few week from now. When my video is ready i will let you know!

[@DocRonSnyder]

You are super talented. Always enjoyed watching your video. I hope there is a part 3.

[@Paoson_Woodworking]

thanks, the part 3 will be here soon

[@glennev6806]

wow, you sir are a proper wood worker

[@shophacks]

You make some of the best shop tools on KZbin. Thanks for sharing!

[@Paoson_Woodworking]

thanks mate!

[@nsanerydah]

Goodness this is detailed!! Would love to add this function to my bench. Just got a track saw and this would be amazing.

[@julianlech8505]

That is there best work bench I have ever seen. Fantastic job.

[@Paoson_Woodworking]

thanks!

[@markhedquist9597]

Man, when I watch your videos I am just, so impressed with your shop...your shop built tools...and the cleanliness and orderliness of it all. Your shop, to me, is like some sort of Nirvana for woodworking. This build is great. Like all the others...it's great. Could you please tell me what brand of pedestal drill jig yours is? It looks quite precise and capable.

[@Paoson_Woodworking]

thanks Mark! check this out: www.paoson.com/forum/viewtopic.php?f=22&t=204

[@billystray7007]

You are a rockstar!! And with such a modest tool collection Very impressive

[@Paoson_Woodworking]

thanks mate!

[@maconbacon]

You look like a movie russian villain This is such a great idea...you can still use the bench top for regular workbench use, and that simple side solution can do precise rip cuts, I was thinking about making a vertical rip cutting thing to save space, this is much better

[@kennethturner7942]

Love all of the wonderful handmade jigs!

[@martyjosephson4937]

Hi, you could put a hidden lever which would slide under the bench top and use it to rotate your full sheets of plywood the top of the bench. If you make the pivot point about an inch above the center you could use one finger to rotate the plywood up onto the bench top, this concept works very well for me and after using it I rotate the lever up horizontally and slide up under the bench top until I need it again. I hope this helps.

[@marcohaefner1644]

Señor carrajo. Sus ideas son de ptm! Muchas gracias por la inspiración! Saludos

[@youtumalaga58]

Bien Maestro ! Suso, has superado todo lo que he visto sobre bancos de carpintería ! Estoy seguro que criticas las habrá : el coste, las dimensiones... pero esto es mas que un simple banco esto es una estación de trabajo super completa. Para toda la vida vamos. Un abazo desde Bordeaux

[@Paoson_Woodworking]

gracias como siempre!

[@rodolfogagnotti5066]

Este senior es un genio , es una pena "para mi no saber su idioma " pero trato de entender las extraordinarias cosas que hace "un genio" saludos desde argentina .....

[@Paoson_Woodworking]

hola Rodolfo, muchas gracias. Recuerda que puedes activar los subs en español

[@tonit.6021]

Esa mesa está muy bien, me estás haciendo coger envidia. Lo que más me gusta es verte trabajar, se nota que eres luthier. Saludos

[@Paoson_Woodworking]

gracias como siempre Toni!

[@gendos702]

Любо дорого смотреть когда руки на месте, отличная работа!

[@barstad-9591]

Excellent design and craftsmanship! Thanks.

[@Paoson_Woodworking]

thanks!

[@МаксимМороз-ж3я]

Вёрстка просто супер, все на высоте Лайк! 👍👍👍😉

[@Своимируками-к8ц]

Супер верстак, большой респект мастеру!

[@xylonguitars]

your work is truly inspirational! thank you for sharing!!!

[@donwyates]

This is one of the nicest benches I've seen. Also, the drill press seems very handy! Like the table saw as well.

[@Komtraya]

Was hat dich der komplette Tisch an Material gekostet? Es ist der beste Multifunktionstisch, den ich auf KZbin gesehen habe. Super!

[@ЕвгенийДетков-ы3п]

Отличная работа,мне понравилось)) Удачи в дальнейших проектах

[@gyanbhaiff8173]

जो आप बनाया है वह हमारे दिमाग मे जमाने से हैं और कही जादा बेहतर है

[@Mastervdome_62rus.]

Получилось всё супер !!! Верстак получился отличный !!!! Удачи в проектах !!!

[@Paoson_Woodworking]

thanks!

[@firmansyah-rd9hu]

It seems everything easy in your hand. Incredible!

[@LanceMcGrew]

14:15 now that made me cry - cutting into that beautiful top

[@lucasalvagno9959]

Il piu bel banco da lavoro mai visto..!! Complimenti

[@IEnjoyCreatingVideos]

Great work on the rip cut guide Suso! Thank you for sharing the great video with us.👍😎JP

[@kenseastrand7428]

Very nice work sir! the bench I am building is a little different, but you gave me some really great ideas, keep it up buddy.

[@christianeitner8109]

Danke für das Hochladen 👍 👍 👍 Lg

[@GarlandLym]

There is so much skill being shown, I don’t know where to start. But my biggest barrier to building this is That I have zero clue how to use all those drilled holes beyond wedging vice items like he shows later in this series. I wish I did.

[@Paoson_Woodworking]

If you'd like to help me, you can upload subtitles in your own language following this link: kzbin.info_video?ref=share&v=bLOlQzxwgMM

[@АлексейШеметов-л6в]

Done!

[@LostWhits]

This would have to be the greatest comment on any DIY KZbin video I've ever seen.

[@Paoson_Woodworking]

@@АлексейШеметов-л6в thanks!

[@reinholdpoier1791]

German translation - Done!

[@deanwilliams93]

I liked your tools a lot.... the ones you made I should say.

[@terrytopliss6423]

Super bench really well thought out.👍👍👍

[@reaper060670]

I love this Rip guide bro.. It's brilliantly thought out. I realise it may be a simple thing for u to make but for me it's brilliant my friend.. I wanted to build a saw that would allow me to cut large boards, etc on the wall of my shop.. Would u ever think of doing something like that for a small workshop like I have where space is at a premium.. I have a 16X12ish.. The 12 has the ish to it..LOL.. It could be 10 feet across.. I need to do a proper measure up but at the moment I need to clear it out and fill a skip full of crap that was allowed to build up in the garage for yrs..Too much info there I know.. LMAO I begin building or kitting out my workshop next week nd it starts with 2 skips.. haha! Once I get it cleared and cleaned then I have to put in new lighting and

[@redfish6C]

Hi Paoson. it's amazing the precision with which you work. Continue to make us dream. FORZA VTT ✌️

[@Paoson_Woodworking]

thanks!

[@basenka54]

you always have very thoughtful implementations of your ideas.

[@Paoson_Woodworking]

Thanks!

[@SNMCustomWork]

Muy buen trabajo, esta quedando una mesa con muchas funciones. Enhorabuena.

[@Paoson_Woodworking]

Gracias compañero!

[@mohammeddemni9433]

Iam from algeria and i enjoy your work thank you

[@Pepe-ry8pm]

Impresionante. Que envídia (sana, por supuesto) me da ese banco que estas construyendo.

[@Paoson_Woodworking]

gracias Jose!

[@Zackmex]

That riping raíl is just insane. 👌👍

[@didanoff]

Thank you it is the best workbench I ever seen. I have a question: what happens with table top during season size changes? (Now I am reading a book about woodworking and it writes that it is not the best way of setting up table top.)

[@АльбертДобрыйтатарин]

Всё просто супер,а сурдоперевод на русский вообще прелесть. Спасибо за хорошее,поучительное видео. Удачи и здоровья тебе.

[@rafvdp6391]

As usual ,great ideas and perfect execution. 👌👍

[@Paoson_Woodworking]

thanks!

[@talltimberswoodshop7552]

Excellent job on the additional features of your bench!

[@warleyribeiro..omontadorma3]

Um dos melhores vídeos show ...

[@FranksDIY]

Love the way it's coming out . Very nice

[@Paoson_Woodworking]

thanks!

[@lissajousmake]

Excelente banco de trabajo. Se ve muy sólido y robusto, además de muy práctico.

[@Paoson_Woodworking]

Gracias Alvaro!

[@gabrielvaldez6877]

Espectacular, siempre con ideas originales. Felicitaciones.

[@Paoson_Woodworking]

Gracias como siempre Gabriel!

[@terrytopliss9506]

Looking good.👍👍

[@thesplinteredfinger]

I think this is one of my favorite videos from you, I’m going to have to make one like this!

[@Paoson_Woodworking]

thanks

[@Warkive]

As if your craftsmanship didn't already instill me with inadequacy, at 17:18 I see you using a bandsaw and sander you made yourself. Ok, you win.

[@cord21465]

I thought the same. An extraordinary talented woodworker😀

[@deanwilliams93]

Necessity is the ..... and the Jeopardy answer.... What is the mother of invention

[@solidusseal]

Great skills also on the SketchUp part :)

[@loktinl]

What a novel design! Thank you for sharing! Two questions: 1) Is wood expansion for your top a concern for the flatness and also cracking, given you’ve lag bolted four corners of the top? 2) you have different types of coating on each side, will that again affect the flatness? Thank you for sharing! Can’t wait for the rest of the series!

[@Paoson_Woodworking]

thanks Lok! I I think both questions are similar. Maybe with a board made with wet wood and low thickness could have problems, but not with a quality finger joint board. Both the water-based varnish and the oil-based finish will protect the wood against moisture exchange.

[@NovgorodskyLeatherCraft]

you are plywood wizard!!!

[@art3nfakt]

Hi, realy realy GREAT workshop👍😉 i love see yours vidéos, it's a Big show everytime 💪😉 bye

[@Paoson_Woodworking]

thanks!

[@rogeriocoelho2716]

Building with Pinus plywood is very easy. I would like to see this equipment made with hard Brazilian woods.

[@VyebastVa]

Я так понимаю, что этот верстак, делается на заказ - продажу. Это здорово, от план-проекта, до реализации. Всё своими силами. Мотивирует)

[@swjang3584]

I'm sure that you're gifted👍

[@MrLedav1]

Tres beau . Beau boulot

[@martyjosephson4937]

Very Nice Bench, Can you tell me if you used a 20mm steel rod for your dog holes, and second a lnk to the drill press guide that you use for the holes? Thanks very much.

[@Paoson_Woodworking]

hello Marty. Yes, I've used 20mm. Here the drill press stand: www.paoson.com/forum/viewtopic.php?f=22&t=204

[@martyjosephson4937]

@@Paoson_Woodworking Thanks for replying, those 20mm rods are they steel or aluminum and the overall size, thanks

[@Bustermachine]

Did you leave any play in the workbench top to account for expansion/contraction with moisture?

[@astoica1]

Where did you buy the drill press. I find it very useful and I was always looking for something like that. I myself need one exactly like that

[@fabiofaria4243]

Very good!

[@Fab045jb]

Excelente, estaba esperando esta parte.. Eres muy bueno en esto..

[@Paoson_Woodworking]

gracias!

[@MyAcero]

Ese calificativo se queda corto, para mi suso es el sueño de la excelencia. La pena que no se inglés y sería de gran ayuda que se tradujera al castellano. Pero vamos que es dios este hombre.

[@Paoson_Woodworking]

@@MyAcero gracias compañero! Recuerda que puedes activar los subtitulos en castellano

[@nigeljordan2318]

Amazing stuff!

[@joeforster5503]

I am getting ready to buil this, and would like to know your hole spacing on the top for holdfasts. also, did you flip the top to finish the holes on the bottom? i plan to build this using metric dimensions despit being in US