DIY SMART LED LIGHT FOR AQUARIUM ON A BUDGET

For the smart led/ individually adressable led, there are three components that are needed to make it work. The components are the smart LED strip, a compatible smart LED controller and a compatible power supply. If you have any confusion then please let me know in the comments. The parts listed here is good for a 3ft led build but don't interchange the components unless you know what you are doing as it may break the compatibility.
Free International shipping isn't available at the moment because of COVID but here are the parts needed for when the zombie apocalypse is over.
Also this is one of the cheaper configurations on a budget, you can upgrade the controller if you can go higher on your budget.
LED Controller:-
SP110E MINI CONTROLLER
www.aliexpress...
(Select Model SP110E)
LED Strip:-
www.aliexpress...
(Select 5V WS2813 Black PCB or White PCB, PCB colour is Just the strip colour and for the second option select 1m 60 IP65)
This particular model is waterproof (IP65 rating) and also has 2 data channels, so in case one led fails, the whole strip isn't wasted and the reamining led will function properly.
Power Supply:-
www.aliexpress...
(Select EU Plug if you are from India/Europe or the plug of your country, and the second option select 6A, so this power supply can support upto 30watt of power consumption, ideally 5Amps is enough for a 1metre strip but that option isn't available)
or
for Indian Buyers:-
www.amazon.in/...
(Select 5Volts 5Amps, this power supply can support upto 25watt of consumption and is ideal for a 1mtr strip listed above)
Do not mess with power supply as the wrong power supply will destroy the led strip, so do not mess with things lying at home just because they fit. You have been warned
Regarding the wiring, the SP110E has an extra clock pin wire which will remain unconnected, the Data In and Backup Data wires of the WS2813 led strip is to be connected to the single data wire marked with DAT of the SP110E LED controller. GND of controller will connect to GND of the led strip and VCC wire of the controller will connect to +5v of the LED strip. Take the help of a electrician if you don't know how to join wires, you will have to cut the connectors and strip some of the cable to join them as the connector wires dont match to what we need. So keep a wire stripper and some electrical tape handy if you are going to do this yourself.
You will have to download LED hue app which is available both for android and IOS. The strip works over bluetooth paired with your smartphone.
Let me know down in the comments if you need any specific infomation that I might be able to help with.

[@amananand2029]

Your videos are awesome man....keep making these videos

[@indianbluefrog]

Thanks :) will do!

[@danthereaper1]

Nice video mother yaar.

[@indianbluefrog]

Thanks Chingu

[@Mohd.SHAHNIB]

Make more ...fish food unboxing videos

[@indiananupam5715]

What is your tank size bro in feet?

[@indianbluefrog]

36"x18"x18.5" (3 feet width, 1.5 feet depth and 1.5 feet in height approx)