⚡[DIY] The ultimate router table full build (Part 1.) / very stylish and functional router table

[@mullinstech]

ANOTHER fantastic build! You Sir are just full of fantastic talent and Ideas. Thank you for sharing your knowledge with the world!

[@norbertkern8285]

Diese Holzarbeiten sind einfach Weltklasse. Mit freundlichen aus Germany

[@johnjensen5540]

Your projects are always well thought out and nicely executed. Your videos are easy to follow even without narration. Excellent as always!

[@carpentak]

Thanks for the nice comment. my friend

[@michaelbaykara2322]

Agreed.

[@fredtoto3255]

Je ne me lasse pas de regarder vos vidéos. Elles sont tellement qualitative. Tout parait facile.

[@stevenzinn6011]

Very nice use of a variety of hardwoods makes it stand out. You are an artist.

[@275jesuss]

As always, I understand well that moderate tools are essential for good work. Have a nice day. 🔔""

[@carterscustomrods]

I love the idea of using 2 pc hanging brackets!

[@claudej55]

Comme toujours, ..le détail qui tue. Encore bravo!

[@АлександрЧумак-м2о]

Очень классные у Вас изделия. С меня подписка. 👍👍👍

[@michaelbaykara2322]

Hello Takkie! Very good table, looking forward to part 2 👌👌

[@bradleytuckwell4881]

Absolutely beautiful

[@carpentak]

thank you my friend

[@javierpena8894]

Muy bello trabajo. Felicidades

[@marciac5892]

You have amazing skills. Thanks for sharing

[@marciac5892]

Do you sell you products, if so where?

[@carpentak]

I am not selling. sorry

[@marciac5892]

No problem. Thanks

[@rodpotts2666]

very nice, now i need to build one.

[@josephpessano]

I love your creativity 🙏☺️

[@gforcekaras]

Attention to details are amazing! Great job sir!

[@carpentak]

Thanks for the nice comment.

[@carterscustomrods]

@10:16 ... this is why I never use the Dewalt base as a lift. When you disengage the clamp, it changes the location of the bit. It makes the bit move to 91°-93° and the height changes up to 0.4mm. I wish bosch would make a better height adjustment setting. One that lets you do micro-adjustments (up to 0.5mm) without unclamping the motor.

[@StuartSanborn]

Amazing well built and thought out.

[@briandevitt6903]

Amazing quality in your work. Well done.

[@ВасилийЮркевич-к2ф]

Отличная работа, спасибо.

[@thedude4632]

Very nice !

[@steveferguson1232]

Exceptional as always. Very well done. Part two will be nice to see

[@yunchuellee9862]

훌륭합니다. 배우고 싶습니다.

[@minemangca6869]

감탄사가 절로 나오네요~♡♡♡

[@wiliamson2]

perfektna robota !!!!! 100%

[@rogervoyer4799]

vraiment bien fait continu ses super

[@asdwee4444]

Nice job. I like your accurecy. Thanks for sharing

[@eikestrumpelmeyer]

Wooohooooo very very nice work... No more words 😍😍😍🤘🤘💪👍👍👍👍

[@semtex2987]

nice built, as always 👏

[@diegohperez6434]

Very nice

[@arminfloss6155]

Super 👍👍👍👍👍👍👍👍👍👍

[@АлександрКупцов-ж9ш]

У меня будет такая мастерская или подобная, со времинем обзаведусь таким же инструментом)

[@pascalhoarau5030]

NICE VERY NICE

[@arickyusuf5435]

Good job

[@johnmay3266]

Beautiful.

[@javierpena8894]

Saludos desdes Tuxtla Gutiérrez Chiapas México

[@tjacksonwoodworker3726]

very nicely done..

[@glenturner4985]

Very nice !! Knock knock , lol

[@michaelrust1159]

Awesome design, do you sell the design or the made product

[@carpentak]

thank you, I do not sell any plans or products. sorry

[@paulroos8517]

A beautiful router table, congratulations! What type of router bit have you used to cut the groove in the aluminum?

[@carpentak]

thank you . It is a cnc end mill cutter.

[@i679n5]

Are you cutting the router insert (red plastic) with your Ortur laser or with another tool? I will have to learn more about the laser capability 😊

[@carpentak]

that's right I cut it with the Master 2 laser. It takes time but it is possible

[@juarezasantos9216]

Excelente trabalho. Teria como adquirir um plano turorial deste projeto?

[@carpentak]

No I do not make tutorial plans. Thanks for the comments

[@reaper060670]

I have to ask bro. What the name of that beautiful BANDSAW u have in ur shop? Is that an Axminister or someth? I love the look of that saw man. I say this all the time but I'm slowly beginning the move into my own small 16X10 workshop. It's taken a few months to get things near ready but I still have a lot to get for it. U have built one heck of a ROUTER TABLE there bro. I love it. I only hope I can acquire the skills one day to be able to build something that good. For now though I will be screwing my cheap router to a nice piece of Hardwood plywood and clamping it to my soon finished workbench. That'll have to do me for now and it'll work for the time being. U have a fine shop there with some great tools in it. What kind of chuck is that in ur DRILL PRESS? It looks expensive bro. Apologies for so many questions but I get giddy about tools at times. What can I say cept I love power tools. I will be investing in a good bandsaw next year and probably a good table saw with the cast iron table from Axminister. They have a great range and I cannot afford the Saw stop. They're way too expensive for my taste and where I live? little feckers would be trying to break in to steal everything so I have to be very careful about showing anything like that. LMAO.. Anyways great video mate. Keep up the fine work. Ur inspiring me when I watch these videos..

[@carpentak]

thank you My friend My band saw is Laguna LT14/12. The drill press was replaced with a keyless chuck. It's not that expensive. It's convenient and worth the money. Power tools are of course the more expensive the equipment, but I choose them as long as they are up to the level I need. Keep trying and learn carpentry, and you'll make a good router table too. I hope my video is helpful.

[@Cythraul9]

What's the second saw on the right, and I haven't seen a video about it yet.

[@carpentak]

It is the second table saw exclusively for DADO with an 8mm thick saw blade. Sorry there is no video of it.

[@jairsouza7108]

Muito bom! 🇧🇷

[@stormman8393]

CarpenGENIUS

[@koccocarrasco5696]

💯👍🏻👍🏻👍🏻

[@Salinast]

What size is the aluminum. Width, length & thickness

[@carpentak]

300mm×200mm 10T

[@Salinast]

Thank you. A job well done

[@Salinast]

What’s 10T

[@carpentak]

Sorry ,it is 10mm

[@nathaliepigny956]

Bonjour quel est le modèle de votre Defonceuse Bosch et accessoires. Merci Toujours s un plaisir de regarder vos vidéos.

[@carpentak]

감사합니다. Bosch GKF 1600 입니다.

[@nathaliepigny956]

@@carpentak vous avez dû acheter un autre support spécial router?

[@carpentak]

나의 라우터는 bosch GOF 1600ce 입니다. 이것과 같은 모터를 사용하는 GKF 1600 베이스를 따로 구입해서 라우터테이블 리프트로 사용 했습니다. 모터 추가구입 없이 하나의 모터로 플런지 라우터와 라우터테이블을 사용 하기 위함 입니다.

[@nathaliepigny956]

@@carpentak can you translate in english please. Have a Nice day

[@carpentak]

Ok. My router is a bosch GOF 1600ce. I bought a GKF 1600 base that uses the same motor and used it as a router table lift. This is to use the plunge router and router table with one motor without purchasing an additional motor.

[@terlee4497]

Do you sell plans?

[@carpentak]

Sorry i do not sell

[@MauriceBOQUILLON]

Bonjour, est-il possible d'obtenir le document en PDF ? Merci.

[@carpentak]

저는 플랜이 없습니다. 그냥 작업 합니다.

[@matthewwysocki5019]

Amazing! You are very talented and highly skilled. Thanks for sharing!