DIY Ultimate Cornhole Boards with lights and speakers

[@jeffhenderson3318]

Incredible workmanship! I just made two boards with UGA laminates, lights for the holes and 2 Altec Lansing paired Bluetooth built in speakers. I’m throwing both boards away after seeing your two boards…

[@SniperChris18]

Just stumbled on this video. Being a Georgia boy myself I had to check it out. Gotta say those are the most well thought out and most insanely awesome set I’ve ever seen!.... GO DAWGS!

[@oxintheshop]

Thanks Chris I’m glad you like them. Go dawgs sic em

[@tonymj1973]

Just one word.................Beautiful!!! Awesome Job!!

[@oxintheshop]

Thank you tony

[@toolman101476]

Everybodys like yea I can build that......then he whips out the cnc machine.

[@oxintheshop]

yea had to step it up a notch

[@ivancarrejo6551]

a notch???..like 100 notches!!!..lol

[@thejourniganadventures7391]

toolman101476 right 😂 I was thinking the same thing.

[@spydergs07]

You can get small shop CNC machines for like $6k. They are not that expensive.

[@frankborja25]

Ox In The Shop....a notch? that kind of work is not in the ordinary guy's orbit...

[@rayv882]

Dang that's the nicest set of cornhole boards I've seen so far, excellent job bud!

[@oxintheshop]

Thanks so much ray thanks for watching

[@dbutler27]

Probably one of the nicest sets of boards I hace ever seen

[@oxintheshop]

Thanks and that is awesome I’m glad you think that. I was trying to just make some no one has seen and I think/hope that’s what I did.

[@garynorthcutt]

Very nice work Drew. would you please share where you got the speaker and fight song from.

[@oxintheshop]

So the speaker didn’t work that much so I didn’t post where to get

[@lisacooper6681]

The best design I’ve seen yet. Better than my cornhole board builds. Great job!

[@oxintheshop]

lol Im sorry. Im sure yours are awesome too. thanks for watching

[@inspiringbuilds]

Awesome boards and the CNC machine really finished them off nicely! Subscribed!

[@oxintheshop]

Thanks glad to have you

[@devinrichter9840]

Drew, you should have.....just kidding. Honestly, the coolest set of corn hole boards I've seen yet. I love the video! But kind of hate it at the same time....it adds a project to my ever growing list of projects. When I make mine, I'm hoping they look half as good as these do. Awesome job!

[@oxintheshop]

thanks Devin, I am glad you liked the video and i look forward to seeing the ones you build. thanks for your support as always

[@phongtran6367]

Amazing work! Where did you get the sound module? I didn't see the link in the description. Thanks.

[@oxintheshop]

I can’t remember but it didn’t work that great

[@jveetv7369]

where did you get the motion sensor and sound machine? Did not see that listed

[@spydergs07]

What sensor was that for the music?

[@donpalm7012]

Where did you get the sound box from? I’d like to get something like that.

[@TheMuzShop]

Sweet Drew!! Lots of fun with Cornhole as it is but with the way you made them , the look the light and the music, just adds to the excitement. Great job Bro.....

[@vincepresto759]

LOVIT ! Better then the few I’ve made with LED LIGHTS but the CNC just went over the Top Dude ! Thx’s for Sharing from St Joseph, MO.

[@oxintheshop]

The cnc was intended to be over the top. Thanks for watching

[@dennisdaudet677]

Where do you find the cheer sound for when the bag goes in the hole

[@oxintheshop]

Can’t remember I think I downloaded it off KZbin maybe

[@christopherd.337]

That's awesome Cornhole board. Where you get sound box? And was it motion activated when bag went in hole? I'm definitely going have try make a Cornhole board similar to yours. Great job 👍

[@gratefulRed69]

that CNC design/operation was pretty amazing. As a DIY guy...got to admit those CNC machines take projects to a whole different level. I haven't really looked into the cost of them, but i such a idiot with computers (yes, I'm a bit older) I have doubts I could ever get the graphics/design part of it down well enough to actually make something cool with it. Awesome boards though !

[@josephruch4154]

Is it also possible to purchase the cnc laser/router file?

[@eddiewilliams883]

Is the epoxy to slick when playing? Does the bags slide back down the boards?

[@oxintheshop]

Actually not slick enough. You would think it would be but poly is more slick

[@stevenswiatek6268]

what brand cnc is that??? Awesome job!

[@oxintheshop]

Garageworx cnc but I don’t think he makes them anymore

[@krikirk]

Where did you get the speaker? I'd love to add it to my boards

[@jodaddyswoodshop331]

????? Any update?? I would love to know what’re you got the sensor!

[@alanirizarry118]

Ditto would love to know where to get sensor music box

[@TNSoldier88]

Is the speaker actually triggered by the bag going in or is that just computer editing? If it's the former I would love to know how you did that

[@oxintheshop]

It is triggered by the bag but only worked half/ quarter of the time

[@ManCrafting]

Pretty sweet cornhole boards. Love the storage compartment and the led/music upgrade. The design wether you're a UGA fan or not should be appreciated. That style could be made with any team.

[@oxintheshop]

ManCraftingTM thanks chad I always enjoy reading your comments because they are unbiased and read in a way that is appreciating the work as well as helping others appreciating it as well.

[@dimensionswoodworks]

Everyone always has something to say, no matter what team you do!!! #RTR🐘🐘🐘. lol 😂

[@leggettswoodworx4143]

Those boards are freaking awesome!!! Gotta step my game up now!!! Great job!!!

[@oxintheshop]

thanks let me know what you come up with

[@markmoody4699]

Was going to ask same thing..need to find them anyway

[@adrianavicari4804]

Love your videos. Can you tell me what kind of CNC router you have ?

[@oxintheshop]

Garageworx cnc

[@lukebeenken1066]

Beautiful boards. What did you think of the epoxy finish as far as play is concerned? Some people say it’s too fast and I’m curious what you think

[@oxintheshop]

It fast at all. At first it doesn’t slide one bit but after you play and it gets powder from the bags it works great

[@iwmwtcm]

Great job, very professional and creative...except...no eye protection???

[@waynekraemer244]

Where did you get the speaker that plays the fight song?? That’s awesome!

[@oxintheshop]

From an online tailgating website that I had to record the sound too. But I wouldn’t use it again big it didn’t work well and took a while to get the sounds to work for the video

[@waynekraemer244]

Ox In The Shop thanks for the quick reply and honesty, great video!

[@leslietompkins3461]

how deep did you carve into the plywood? .1 or so? also what plywood is this Birch?

[@oxintheshop]

.125 and for those I think I used purebond lol but I can’t remember for sure

[@leslietompkins3461]

I looked on Home Depot’s website they have the 1/2” maple and red oak with the holes already cut but u have to special order... well Atleast in Virginia... bunt with this depth of cut I’d rather have 3/4”

[@jonblake7696]

very nice looking set of boards. im wondering how you dealt with all the rough edges after the cnc machine finished? i do alot of routing and always struggle with that. thanks

[@oxintheshop]

The v bit cleaned everything up pretty good. But for the couple little spot I hit them with 220 just to knock off the bur. where the arches were a little more rough due to the bit not being the sharpest i used a razor to clean it up. Hope this help but when router a good quality bit goes a long way. thanks for the comment and for watching

[@jentroncale2085]

These are so cool! What a great idea to use the CNC machine! Just curious though how heavy are these!?

[@oxintheshop]

Lol Jen they are not light at all. Not sure on the weight exactly but they are a good bit heavier than the regular boards

[@rickybobbyracing9106]

That's a nice Green Bay packers board ;)

[@oxintheshop]

Lol your funny go dawgs

[@ramonrascon1476]

Do u still do cornhole boards? Would like to c how much u would charge to make me a set!

[@aceydover1782]

How did you clamp cow hole boards down on CNC?

[@oxintheshop]

With wedges

[@frankborja25]

if those were my boards they would be hanging on the living room wall! great work!

[@oxintheshop]

Lol thanks

[@therealvizualassassin]

May I have info on your engraver? What is the model and specs to fit a 24"x48" board?

[@oxintheshop]

Garageworx it is 48x48

[@BearCreekWoodworking]

Great Job Drew! Nice to see you using Jimmy's Ice Pick! I like the epoxy top, and the playing music when you score is an awesome idea!

[@oxintheshop]

Bear Creek Woodworking thanks and yes I use my diresta ice pick all the time

[@Djvickers20]

Any chance you would do a video on how you did the design with your cnc, or share the g code?

[@oxintheshop]

yes I could do a video on that

[@lelavender]

What a a beautiful set! You could make a nice side business. I would definitely buy a Tennessee set.

[@oxintheshop]

Tenn....... im sorry. but yes I do sell them let me know if you want one

[@jerrystorm3199]

@@oxintheshop how much do you sell them for? Thx

[@Rastanley1975]

I am interested in designing a pair. Where in Atlanta are you located?

[@oxintheshop]

Cartersville ga

[@oxintheshop]

Email me on my website

[@thebbqalchemist]

Those boards are sick! YOU took that to "anubba lebbal "!

[@oxintheshop]

haha no sure what that means exactly but thanks

[@tom86828682]

Where did you find that sensor for the music. Thats an amazing touch.

[@enzoakland34]

Those are amazing. Great job.

[@oxintheshop]

Thanks glad you like them go Dawgs

[@bat2ball12]

I didn’t know any Georgia fans had the brain capacity to do something like this. Good to see

[@dwayne4385]

How much do you change to build a set? Those are amazing

[@oxintheshop]

A lot message on my website if interested they ain’t cheap

[@brwnj28]

What is the name of the tool that did the cut out?

[@oxintheshop]

Garageworx cnc

[@sjaxon29]

How can I get a set? GO DAWGS!!!

[@oxintheshop]

I do sell them. Contact me thru my website there are not cheap tho

[@italiangambino755]

How do I get a hold of you to make me some Custom Cornhole boards

[@oxintheshop]

Email me [e-mail]

[@italiangambino755]

@@oxintheshop I would like u to make me 2 cornhole boards like the ones you did in this video same kind of design but Ohio State and if you can put the Ohio State theme song on the on the Music sensor and put red Neons around the hole and the outside can you give me a price on how much it would cost to do that thank you for responding back me

[@oxintheshop]

I emailed you back just let me know

[@peterthayer1819]

All the cnc, epoxy stuff and speakers and then plywood legs. Pop for the $8 for solid wood legs.

[@MikeKapotsy]

Nice job Drew! Cool project and outcome.

[@oxintheshop]

Mike Kapotsy thanks

[@jb_woodcraft]

Awesome build and video! Best cornhole boards I've ever seen! Go Dawgs!

[@oxintheshop]

thanks that is awesome. share the video to all your fellow DAWG friends GOOOOO DAWGS!!!!! SIC EM!!!!! WOOOOF WOOOOOF WOOOOOF

[@jaredgummersall8622]

How much would you charge to make one of these? Or will you not do it again?

[@oxintheshop]

I’ll make them again. I just emailed you back so let me know

[@gordygray1738]

Amazing job!!! I wish I could have a CNC machine like yours…

[@nealonswoodentreasures9273]

Good job Drew They turned out great

[@oxintheshop]

Nealons Wooden Treasures thanks Steve I think so as well

[@Rgarcia713]

One of The nicest sets I’ve ever seen

[@oxintheshop]

Thanks

[@phillja]

Great job! Now it is wide open to other team designs.

[@oxintheshop]

JK's Timber Scraps thanks and yes that is true

[@LarryLanham2008]

Curious, do you have to have any special licensing agreement with NCAA or SEC, NFL, etc. to resale?? how does that work exactly? I feel like when you buy the decal you've paid your part, but I've also heard the argument when you do resale they still may want a piece of the pie. thanks

[@WindsorCraftDesigns]

Great design and build.

[@oxintheshop]

thanks chris. they are awesome

[@jefflawson7543]

Where did you get the speaker for the board

[@oxintheshop]

Online somewhere but it doesn’t work great

[@tylertroyer7656]

How did the epoxy affect the bags? Did they slide or stick ?

[@oxintheshop]

At first they are very sticky but play a little bit and the powder from bags gets on there and they start to slide perfect

[@tylertroyer7656]

@@oxintheshop awesome!

[@oxintheshop]

Thanks

[@designsbynobody2406]

Do you have a site where you sell these ?

[@oxintheshop]

Email me on my website and let me know what you are looking for

[@jeffreydtube]

Did you do 2 epoxy pours or a single pour? Looks great!

[@oxintheshop]

I did a pour for each board and I think I had to pour a little on each after than to raise it up enough. Thanks

[@jeffreydtube]

@@oxintheshopDid you pour the vcarved sections first, let it cure, then pour/brush on the top or was it all one pour?

[@angeleyedx09]

so you sell the boards and where would i go to buy one

[@oxintheshop]

Email me through my website

[@David88375]

What did you put on top? Epoxy

[@oxintheshop]

Yes epoxy

[@3d-cnc245]

Nice boards

[@mylifeproductions4590]

Did I miss the CNC machine in the tool section ?

[@oxintheshop]

it is a garageworx 4ft by 4ft machine

[@p.s.9702]

Nice boards . But you could put handles to carry them but awesome also.

[@oxintheshop]

That would be a good idea

[@ammazcd]

Where did you get the sensor that plays music?

[@oxintheshop]

I can’t remember somewhere on line but I wouldn’t recommend it

[@ammazcd]

@@oxintheshop cool, thanks

[@RechadTheArtist365]

What kind of CNC did you use

[@oxintheshop]

Garageworx cnc by dave Gatton he is in KZbin check his stuff out tell me I sent you

[@jacobdout]

These are absolutely great cornhole boards. However, I was wondering why you might not have used red epoxy to fill in the design and then just sand/plane/chisel all of the excess off of the black?

[@oxintheshop]

That is an idea but I just want the wood to show didn’t want to fill that up with red. That would have been a lot of red. The gs yes could be red but I didn’t want the stadium dawg or arch to be red. If you make one and do that I would look to see it tho.

[@onaitsabes21]

What is the PIR sensor that plays the song?

[@oxintheshop]

Would not use it again

[@jeffreysims544]

Do you sale them I would like to buy one

[@oxintheshop]

Yes I do email me through my website. Link in bio

[@dhirmer]

Holy pocket holes Batman!!

[@oxintheshop]

Lol yup

[@gnttambiu]

Where did you get the University Pic? What type of file format is it?

[@oxintheshop]

it was just a regular google image jpeg that would put on the cnc program and then edited so that the cnc could cut it out.

[@MerkTheREALTOR]

What would you charge to make me boards just like that with the Atlanta Falcons logo?

[@oxintheshop]

Email me through my website and we can work something out if you are interested

[@dimensionswoodworks]

Good job Drew! That CNC is an awesome tool to have!

[@oxintheshop]

thanks and yes it does come in handy

[@a98gsxr]

How much epoxy did it take to cover both boards? Awesome job!

[@oxintheshop]

1/2 gallon each

[@Brockman369]

Where can I find the motion sensor that plays audio?

[@oxintheshop]

I just searched for cornhole speaker and found it at a tailgating website but...... it doesn’t work everytime more like 40 percent of the time

[@Junkyard129]

Do you have the link to where you got the hole sound system?

[@oxintheshop]

I do not have it but you can find it or something similar with google search. these were a little tricky to get working right tho.

[@billygordon9874]

@@oxintheshop You don't have the link to ware you got the sound system? But you have it and installed it?

[@jakefernandes4294]

Hey man, whered you get that motion activated sound box?

[@oxintheshop]

Some online tailgates store. I’m not very pleased with it tho bc it doesn’t work well.

[@markmoody4699]

Hey where did you get the music box..cant find it

[@kylenorton521]

Great video! What did you use to make the fight don't play? I don't see a link for that- unless I missed it

[@oxintheshop]

I used a machine from a tailgating supply website but I would not use it again doesn't work as well as I want it to

[@matthewsharpton9256]

Hey man! I’m in Atlanta too. How much would a set just like this cost? I’d love to make a set but I don’t have the space or the cnc machine lol. Gooooo dawgs!

[@oxintheshop]

Send me an email [e-mail]

[@charlestarvin42]

I want them boards!!! How much would it cost for you to build them?

[@oxintheshop]

hey charles message me on my website and we can talk about the price

[@cortezmack4277]

What CNC was used in this? I am looking to purchase one for tables around 3 feet

[@oxintheshop]

Garageworx cnc

[@johnholland1343]

Looks AWESOME. Do you sell them? I would like to buy a set.

[@oxintheshop]

thanks and yes I do sell them but they are not cheap

[@ramoselguapo]

@@oxintheshop what would a set of Texas tech run??

[@adambronston678]

What was the machine used to do the engraving?

[@oxintheshop]

Garageworx cnc

[@FuzzyNaval]

Awesome boards! Where do you find the motion activated audio box that plays the fight song?

[@oxintheshop]

I would not recommend the ones I used because it doesn't work everytime like it should

[@Day_All_Day]

nice work brother with the cnc work!

[@oxintheshop]

Thanks

[@spl150db]

i did a super nice top board with tape and stain, then somehow screwed up on the poly part, i dont know what i did wrong. has swirl marks from sanding it between coats. and legs jacked up, trying to fix that as well

[@oxintheshop]

sorry to hear that I hope you got it figured out sorry just now seeing this comment

[@stewartfields7266]

Great looking top but you skimmped on the underneath side. Finish sanding all of it and treat the underneath side with paint or a single coat of poly, just to protect the wood. With the CNC machine you can definitely take cornhole tops to the next level. Beautiful....finish it out tho.

[@oxintheshop]

Yea I understand but it was so much work I was ready to get them done lol

[@stewartfields7266]

@@oxintheshop lol......I understand that. It's a beautiful set tho, you did a great job with it. I'd love one but being on disability, there's no way I could afford something so customized as that. What's something like that run cost wise? I'm sure how detailed of the top is and how much the CNC has to be ran affects the price allot. Again, not busting your chops, its just such a beautiful top that if finished completely, would be the Rolls Royce of cornhole sets. Great job !!! I love to play, just dont get to as much as I'd like to with all the medical issues I got going on right now. Any who, again, beautiful set.

[@truthh8322]

That epoxy scratch easy?

[@oxintheshop]

I didn’t really notice if it did not much but I was careful to only hit is with the bags and careful moving it around

[@TheAndroidswag]

How much something like this will cost to get made from u

[@oxintheshop]

email me on my website and we will talk

[@aaronb483]

Nice editing. Love your choice of music. This compliment from 60+ old man.

[@oxintheshop]

thanks Dale thats awesome

[@steveo1821]

What CAD/CAM program are you running?

[@oxintheshop]

I use vectrics Aspire and Mach 3

[@jamescontreras9339]

Where did you purchase the speaker with the sensor?

[@oxintheshop]

I wouldn’t buy them again doesn’t work every time

[@ivancarrejo6551]

daaayyyyuuummmm...those are badass!!! good job!!

[@oxintheshop]

thank you and thanks for watching the video

[@chriscastilow2632]

Where do you find those types of images to trace in bitmap?

[@oxintheshop]

Just found pictures I wanted on google and put them all together. This was not a image I found all in one. It was in my head

[@DixonButts58]

Awesome on so many levels! GO DAWGS

[@oxintheshop]

thanks so much Ross and yes GOOOOO DAWGSSS!!!!!

[@brgarrison418]

I Agree ........ GO DAWGS !!!!!!!!