DIY Upgrade My Homemade Powerful Bluetooth Speaker

[@Magneticitist]

Filter caps for tweeters, nice =) I love the TPA3116 boards. I recommend for higher quality sound to try the DROK TPA3116 board at 25x25 watts. Basically same board with smaller heatsink and without a built in bluetooth module the noise floor is very low, almost non-existent to the ears. DROK 2.1 board is also good. Can attach a separate chamber for a small sub and radiators for extra bass.

[@bryanpeeters2552]

really nice you listened to everyone. you did a great job dude, enjoy your listening. It looks incredible!

[@berserker341]

Nice upgrade and thanks for adding a capacitor to the tweeters 😂😁

[@kokojim812]

I want to build DIY one

[@Puzzicanello]

Why are the capacitors needed?

[@berserker341]

@@Puzzicanello so that the low frequencies don't go to to tweeter. Because the tweeter can only produce high frequencies and it would blow out from low frequencies (bass) 😀

[@reyjr3608]

@@berserker341 what kind of capacitor did he use?.. I try to build my own diy..but there's no capacitor list been add in for the item i need..

[@reyjr3608]

@@kokojim812 same here..but im an amateur..i just try to follow this video instructions..😅

[@AlexXDIpX7]

I gotta be honest it's quite powerful than JBL XTREME because JBL XTREME runs on 7.4 vols and it's 40w which is quite powerful, but if you charge the JBL XTREME the power will increase at 50w (i think) but it's like a JBL BOOMBOX Mini, overall the JBL XTREME has more weight and i still love every project that you've made

[@garageunderground7402]

Где-то в сторонке плачет JBL)

[@seintbel6893]

@Динар Аргинбаев что там дерево что тут

[@yusufacemoglu1556]

10:23 steam notification lol

[@prxyeditsamv9397]

Agaa hhaahhahaa resmen steam

[@sonagambiarra6181]

hello friend I loved your project so much the first and after the upgrade that you did it was better still wanted to have conditions to be able to buy these components to make a and congratulations for your project I wish you much success for you friend

[@AmzP88]

The best sounding homemade speaker on KZbin 👏🏼👏🏼👍🏼

[@dani4_sound56]

Кстати такой усилитель (TPA3118) стоит в колонке JBL PULSE 3))) там 20 ватт при нагрузке 12Ом. Хотя сам усилитель даёт 60 ватт )))

[@СашаГрей-м2э]

еа JBL а какой именно усилитель,просто по ссылке на али перехожу на усь с пультом,а такой как в этом видео найти не могу,помогите с ссылкой или этот тоже подойдёт?

[@simonvandenbossche9804]

What value should I take for the capacitor? And do I need to set the DC, DC converter to 24V (max rating of the TPA3116D2) or should it be higher or lower?

[@dani4_sound56]

Сделай абгрейт китайской колонки JBL)))!!

[@c1uno450]

Ahh i love that passive subwoofer🤤 and the sound is really great love it🤗. 24:55 Rip Headphone user's🤣 really deep bass it hurt my head lol😄

[@AmstaFF_BakS]

Размер корпуса маловат, это раз, во вторых посередине нужно было делать перегородку (разделить динамики) ибо так они друг с другом конфликтуют и захлёбываются! А так исполнение отличное! Руки так сказать на месте!

[@jamescamil]

You should add a low pass filter to help clean up the sound. The speaker has some strange peaks

[@Booyamakashi]

Have you tried turning it off and on again? Maybe its your PC having strange peaks ;)

[@10010Linus]

James Camil has it occurred to you that it might not be the speaker that is peaky, it might as well be the microphone he uses

[@dong9531]

that bass test . real dope

[@theAGanimators]

Nice build. With all that work I'm surprised you didn't use a primer surfacer and do a nice spray enamel. What diameter of fiber optic did you use and could you provide a link?

[@welcometomychannelswelcome7261]

Great job. Thank you for answering my questions. First video it was 6v. Now it's 12v amplifier more powerful. It could create big bass Now can you please give it to me? Lol. PS create LED lights on around the passive radiator and in front of the speakers

[@VGBSpeakers]

On the 1rst video the battery was a 6.6v but i used dc dc converter for boost it to 24v, but my dc dc converter was a 2-3A and on max volume the speaker going shut down. On the upgrade video i boosted my battery 12.8-14.4v and used dc dc converter 250w 10A. Now on max volume the speaker played normal.

[@welcometomychannelswelcome7261]

@@VGBSpeakers oh I see. When you step up to the high voltage make sure speakers are 8ohm. And kill your battery when you step up. I'm not sure what I said to you.. but your amplifier will get hot.

[@dani4_sound56]

Ах1еть да она давит больше чем JBL XTREM 2..... Мощь💪💪💪💪💪💪💪💪

[@SeikhMohammadali]

Oh bro it got 99% of JBL extreme! 🤩🤩🤩🤩

[@tommylong2151]

What was the total cost of the build?

[@PetrAlekseevich]

~ $ 100

[@feralzi8930]

@@PetrAlekseevich no its like over 200

[@goodgoat3096]

You really need to add at least a capacitor between the woofer and tweeter or even better a complete 2nd order crossover from Aliexpress or Banggood. The more power the more likely the tweeters will fail. Other than tweeter protection, a really nice project. A full schematic would be a nice add.

[@goodgoat3096]

OOPS! Missed the tweeter capacitors!

[@evgenijlaptiew5141]

Шикарно, для чего жибиэль, вот этот бочёнок утрёт кому хочешь нос.)

[@jvm.b980]

good quality of sound. the bass was nice. amazing.

[@geton97]

"Утрет нос jbl" , "jbl нервно курит в сторонке" . Хех, а давайте эти колонки опустим в воду)

[@VGBSpeakers]

Ну для начала в первую очередь надо оценить звук а так очень легко можно сделать ip67 или ip68 колонки. Ето не вопрос.

[@emmanuelebro58]

thanks bro. you educated a lot ofpeople. watched it from your 1st video up to here.

[@norbelcarpio8631]

Can ask what are the cut size for the wood both front and body. Thanks you give me an instant project.

[@Vitalii0307]

Отличное исполнение, чувствуется рука мастера. Есть смысл собирать 2.1 систему? Добавить отдельно басовый динамик. Улучшит ли это качество звука басов?

[@bernardosolizg]

Could you make the wood project available? Please...?

[@julikb]

Great.If you cutt the music and recored some talking in the video will be great! :)

[@exonestebanbenitez8158]

You must be sell it, I absolutlely buy it :)

[@reyjr3608]

Yeah..same here.. 😆

[@abogreisha3714]

5 stars for that. I loved it. Keep it up

[@sammydhk]

i really like ur passion and the work u did, can plz help me out how can i buy things to DIY for 30+30watt 8ohm speakers with battery n the connections. i also wanted to make my own boom box. thanks love ur work bro sandy from INDIA

[@jasonfazioify]

First I would like to say your build is AMAZING. Can I ask you about the power switch. On the site from your links there are a few choices, could you tell me which one is the one to order please.

[@maxcommentator997]

Если это Бумбокс, то надо как минимум ручку приделать.) А желательно ещё и сетку одеть)))

[@jamescamil]

Putting out some good bass

[@dragonballz5987]

great job my friend and would you make this for sale?

[@kashubelua]

SPL has to be took in free open space... nice build, but that trick the results

[@jedunboxing4127]

do you still recommend this build i want to test it?

[@reyjr3608]

woahh...those anyone has successfully try this build? what do u think?.do u recommend it?..please share..i was thinking to make one too but different shell..

[@vigneshkarthi3321]

Great job 👍 bro but can you roughly connect the compounent so all can understand then you can show time lap how you get this design for better understand and for 1 speaker you get 2 video and it increases the view of your channel

[@theAGanimators]

How much voltage step up were you trying to achieve with the first configuration? Most of the boards I've seen with integrated boost have two XL6009 in parallel.

[@mastroitek]

What should I expect for battery life? Great job by the way!

[@marisoldiaz8425]

That is one sick boombox

[@kramm9322]

Great job on this bluetooth speaker. Do you have a cutout template you can post here for those of us that would like to duplicate your build?

[@mariussimion4765]

Hello, can you please be more specific on how you made the wiring for power button?

[@mariussimion4765]

i followed your piece of advice but didn't got same result as yours. Kindly ask for your assistance.

[@AudioHiFiCM]

nice man, brutal sound, very quality!!!

[@muntean9010]

How does it compare to JBL Charge 4 or EXtreme? How long does the battery last on average?

[@racingcolorchile]

El mejor rango de frecuencias para ese tamaño, suena increíble 👌

[@timkarels7894]

Can you tell me what you put between the wire (which was connected to the tweeter) and the tweeter? Some kind of a regulator or something like that I think.

[@Your_Mom_2580]

Capacitor

[@arunraja5906]

I love this material. Can I get something similar? Pls... Any process ?

[@napter100]

Good evening to ask you a question I would like to buy this type of speakers I really liked the one in this video you sell them or you just do them for fun. If you sell them I would have. Thank you very much and I await your prompt response. I am a follower of your channel and I love the speakers you build.

[@SonicShoTT]

pt.aliexpress.com/item/32963889909.html?spm=a2g0s.9042311.0.0.27424c4djISWVW

[@bachanamanagadze]

Is It possibile to connect 3 battery parallels on this BMS?

[@3dprintingforfree26]

Can i use 30c battery instead of 5c? Thats the only battery i have

[@chrischan9497]

wow, great work.🙌

[@dani4_sound56]

А я забыл спросить, а какая ёмкость аккумулятора получилась??

[@VGBSpeakers]

14000mAH

[@bumhedshot96]

Which kind of bottons for volume and ecc , you use? Grest job bro

[@atakaravelioglu301]

Hi, I watched all your videos first and I like it very much. So I decided to do it. But I couldn't decide which speaker to choose. I can only spend a maximum of $ 16 for the speakers (you used 3-4 different models). Which one of you are more satisfied, would you recommend? In the same way, which amplifier module, bass radiator (type?) Do you recommend. What you do is absolutely terrific, and I want to do something nice but affordable. I would be very happy if you could share your experiences. Thanks in advance.

[@atakaravelioglu301]

I would appreciate it if you could share your experiences very important to me.

[@whirls007]

Where do we get the push button controls?

[@emersonsrandomvideos248]

Do you have a tweeter capacitor value and the circuit diagram of all the connections?

[@mmarfe]

Hi man, do you charge your speakers with a 12v power supply? If you run out of batttery could you play directly from the Power supply if or the wireing would have to be diferente?

[@VGBSpeakers]

Hi. The battery voltage is 14.4v. I used lifepo4 battery and i charge it with 14.6v lifepo4 charger. If battery run out you can play it directly from power supply.

[@lesrogers7310]

Now this is a little beauty...

[@armin4004]

If jbl was made this it cost 700$ btw nice speaker you made

[@kentthoi]

it was great. you try with amplifier jab2 electronic sure it will be more amazing

[@CarlosChannel73]

Deve ter dado um grande trabalho fazer essa caixa de madeira

[@bastianmarschner2154]

Which capacitors do you need???

[@gunpaljain8350]

Which audio codec your board is using in this video?

[@ИванШкуренко-я2щ]

Переплюнул jbl колонку, красавчик, топ:)

[@jeffersontadeu4462]

This is 100w ? 50 + 50w ?

[@Serik_Ramazanov]

Добрый день. Очень понравилось. Можно пару вопросов? Как Вам звук (вживую)? Нравится? У меня есть такие же пассивные излучатели. Показалось, что они недостаточно жесткие. Вам так не кажется? 16-й усилитель 2*50, а твиттеры на 20 (режете невысоко) выдержат без резистора? Забросал вопросами))). Еще один: Вы не пытались снимать колонку на улице и на расстоянии? Многие так делают. Объём звука на камеру лучше фиксируется. Спасибо за работу. Удачи во всем.

[@VGBSpeakers]

добры день. в вживую звук вообще класс, я сам не ожидал и был в шоке . пассивки бомба, но можно с нутри грузики клеить и будет еще классно. 3116 усилитель невыдаёт чисти 50w. это в пике может в течении секуды достигать до 50w. ну а твиттеры подключил через фильтрующий конденсатор и пока все работает. на улице не пробовал.

[@Serik_Ramazanov]

VGV Channel Спасибо за ответ. Где-то видел, что монетки клеят на ПС. Очень рад, что Вам нравится. Удачи во всем и развития каналу.

[@fredsousa7022]

Hi! I followed your project and created one just like that. I've got a problem. When I turn the volume to maximum, my column restarts (bluetooth disconnect and connect again) as if i had lost power. You know what the problem might be? Please reply!!

[@VGBSpeakers]

Hi. Thanks for following me. No bro i don't have a problem like that. On max volume the speaker is working, i don't know why you have that problem. Maybe you have low power. Try to put another more power battery.

[@jokerscreationchannel6279]

How many hours it can play with (max volume) in 14k mah battery

[@ratneshkumarg186]

Can we use 4 ohm 20 watt speaker in any amplifier, which is more than 50 watt output.

[@anowerhossain5337]

Is it 3" woofer or subwoofer?

[@zandroruiz2822]

Nice one bro. Keep it up 🤘🎶

[@buya940]

It’s Spot on fellow That’s a keeper there, 💯⭐️⭐️⭐️⭐️⭐️

[@universiti21]

Hy Very a cool project

[@toq_5520]

Oh, I want it but I already have XB40, so nice. And what's the camera?

[@StaticVapour590]

Nice speaker you got there

[@krestenfyhn7379]

Do you have the plans for download somewhere?

[@arijitroy4961]

That DC-Dc step up module input current is maximum 10Ah. But you are using 14Ah, Does it cause any problem?

[@VGBSpeakers]

I used 40Ah on input, but it's not problem, it's not input max 10A, it's output 10A

[@arijitroy4961]

@@VGBSpeakers Inspired by your awesome project I am also trying to build a same.Can you please tell me what is your input current and what is the output current?

[@arijitroy4961]

At 6.30 what did you use to cover the inside? Is it cotton?

[@VGBSpeakers]

Yes it's cotton.

[@arijitroy4961]

@@VGBSpeakers Does it improve the sound quality?

[@AndersonSilva-us6dl]

Beautiful... but please. upgrade a multilaser boombox sp157, including battery. I can send you mine, for you to upgrade.

[@leongailberger7676]

Anderson Rodrigues Silva That thing is trash

[@arwannur]

Wow nice brother

[@Orlando-zy3xj]

Hello friend, it is very much appreciated that you make this type of videos, I would like you to be able to upload the circuit or connection of the components .. Greetings from Chile 😉👍

[@VGBSpeakers]

Look at the 10:20 pls

[@francisconunes1341]

Man, you are amazing!

[@gleeb_bogomolov]

Очень круто ,хороший аппгрэйт

[@Tiffany0000001]

Очень круто. На чем выпиливаете детали для корпуса?

[@chholalorng]

Very nice, I love it.

[@sharukhshrf8526]

5S 50A BMS Board will this work instead of the 4s 40A BMS?

[@dani4_sound56]

Оооо да опять эта красотка)))))

[@fernandonando7106]

Você é foda demais para fazer caixa de som parabéns sucesso pra você valeu mano.

[@JuniorSantos-ic5by]

Lá fora é muito mais fácil adquirir esses produtos eletrônicos ,eu tenho uma caseira mas não gravei como eu fiz , só tenho ela tocando ,confere lá!

[@chanzyhuan6242]

Strong bass

[@vedantgupta4230]

M making one for myself ...i just wanted to ask that 1. Which is better ... using direct 12v output from 18650 battery pack or should i use dc to dc boost from 5v to 12v. 2. Which one is more better...using two separate module for amplifier and bluetooth or should I use single module for both. Plz do reply🤞😄

[@VGBSpeakers]

It will be better if you use single module for both.

[@vedantgupta4230]

@@VGBSpeakers I'm using seperate modules because i want two audio outputs....with single module it can't happen. I'm giving a extra audio output port for future(will make subwoofer)

[@VGBSpeakers]

@@vedantgupta4230 so you can use simple 2.1 bluetooth amplifier.

[@vedantgupta4230]

@@VGBSpeakers that will kill low frequency for my main boombox

[@ВиталийШаповалов-й1и]

Эта вот самая мне кажется удачная на данный момент, хот мне кажется можно было чуточку по больше взять динамики

[@teslas_7463]

very intresting upgrade

[@radiotektv]

Надо было включить как достать соседа было бы громко !!!)

[@NSNG1540]

Nice nice.. 👌👌👍👍

[@Shorts_only10]

Batter then jbl Xtreme 😍😍😍

[@dgjm7129]

For the looks yeah😁😁

[@matthewtoomer2181]

@@dgjm7129 Nah JBL are way more muddy then this speaker. This speaker has better clarity in the highs. Ive heard the JBL in real life and it aint as crisp as this. Plus im audio engineer and I can hear frequencies loud and clear that the JBL suck at

[@VGBSpeakers]

But you don't heard this speaker in real life, so you can't say this speaker isn't better than JBL XTREME. ;)

[@matthewtoomer2181]

@@VGBSpeakers Im not saying this has more bass then the JBL I'm saying it sounds clearer and I can hear higher frequencies better. Low end has longer wave lengths so will use up a lot more energy which smears the whole frequency range. I like the bass on the JBL but I don't like how it over powers the highs. I think you did a better more balanced sounding speaker then the JBL. Plus I never said the JBL was better I said your one was better :)

[@matthewtoomer2181]

This is why its better to separate the treble and bass just like you did. If JBL did this then yours and JBL will be very close indeed

[@rafaeldiazcolis4733]

where do you live I am from United States I would like to ask if you could make one for me

[@somatematica1]

Ficou top de mais!!