DIY Useless Box with Arduino

[@angadsingh6478]

This one is the best than any other useless box video😘😘😘😘

[@everybigpotato2921]

@Christiaan Dasselaar the motors are staying on any help???

[@julianfaul7151]

@Christiaan Dasselaar Have you had any luck, i built it and it does the exact same thing. Motors keeps spinning.

[@siddharthanghan2221]

finally u started making projects on Arduino

[@AshwajeetKamble]

Siddharth anghan he has many projects in which he has used Arduino

[@siddharthanghan2221]

Like....?

[@RoyPurwanto]

so funny haha

[@chiragshaikh8692]

I can literally watch the box the whole day

[@ChrisPerkinsAZPERK]

I'm in the process of making this useless box - Using only the materials listed in this video I was only able to get the servos to work by using a Lipo battery. A 9V would NOT work! USB 5V would not work! I probably over-sized the battery but this useless box worked fine with a 2s Lipo Battery 7.4V 80C 7200mAh. Lipo batteries are expensive and you need a battery charger and voltage limiter. This all may be common knowledge for you techies out there but it was part of my noob learning curve that really slowed the project down for me...

[@ericbrodin7985]

I have just build this one and it works perfect, and to the other guys who is complaining about it doesn't work, test with a better power source. I have used 1300 mah 2S lipo and its no problem at all..

[@wiffwaff4509]

Lipo 2s 2000 mAh in mine. Works fine.

[@cinhuu]

7,4v ?

[@ericbrodin7985]

Yes

[@vilemmarsik7565]

Thanks a lot for sharing this, I am going to make a 3d-printed version for my son's 1st birthday. The comments in the code won't have to be in Chinese, but luckily we have Google Translate.

[@davidvetter1611]

The best ever seen by me! True Cat Spirit! You are a " useless " Genius @😻😻😻 Many Thanks!!!!!

[@elixpo]

Can't believe that a box has such a personality

[@CrazyCoupleDIY]

Damn this is amazing. You made my day

[@ابوهجران-ل6ص]

ههههههه والله ضحكني عاشت ايدك ولو اخاف ماتفهم كلامي بس اني متابعك واحب اعمالك واتمنالك النجاح الدائم

[@JKnight89]

Cute, little kids would love this!

[@deadboy7337]

I like how he inserted the resistors into the breadboard.

[@cheatersslagz6371]

it’s fun in games until at midnight his eyes turn mad and he pulls out a knife

[@ritwiksingh4937]

Bhai u have nice tools and spare parts collection...

[@mrimbusyt]

Nice video i Like it 👌♥️👍👌😀

[@joeyscott4299]

Fantastic ! This one put a smile on my face ! Thank you 👍

[@EggBitesChicken]

Great man, I love this device and Ill try to do it by myself. Thanks a lot for your to-do-list!

[@battlingbassist6955]

It looks like Tom Nook and that makes me happy 😁

[@milanasmeckaya]

Very nice toy!

[@oursilpa]

Made this for my kid, thanks to you...

[@ElectricPointOfficial]

Perfect Very nice !!!

[@krishnamaheshwari6595]

congrats for 1 million subscriber

[@pruthvitechintelugu]

Nice idea bro...think like this only.. you will success in your life....😋

[@AFriend21]

I freaking love it Thanks so much for using Arduino ♥

[@jestermgee]

I made this version for fun, tho I did not use a bread board and heavily changed the code and made some random actions so it wasn't the same loop of actions all the time, however there are some issues in this design. The Lithium battery is completely unprotected, no battery management and if you leave the box switched on (which happens easily) then the battery can run completely flat making it dead and unchargable if this happens. Costly to constantly replace. I incorporated an "auto off" circuit that will disconnect power completely after 60 seconds of no use but second issue, I had a small short develop in a connection for the battery and without any fuse expect the battery to swell up and explode! Something to keep in mind if you have kids that play with it, add a small 3 amp fuse. Need to rebuild it but will likely make it with 4 AA cells instead as it is a little safer

[@bola9452]

Can you share the corrected code please?

[@purveshm2866]

#First time very #laughing and #entertainment box i ever seen #yet!

[@ItaloLima]

Very very Nice Bro !! Like !!

[@Aviation437]

THE best gadget you've made! LOL

[@silverthunderbird]

Nice job. But why does the schematic show a 9v battery, if you specify a 7.4v LiPo? Will this work with a 9v battery? Or possibly 4xAA (6 volt)?

[@moritzhuther9318]

The arduino rev3 just needs 5V. Every battery higher than that works for the project

[@cessposter]

Make one where if you do it 100 times a plaque with "you win" pops up. Then another one with "sike!" *Then Rick Astley casually just ascends.*

[@AshwajeetKamble]

Waiting for this from so much time

[@Parvez.2327]

congratulation you have completed 1 million subscribers

[@yassinelsaidyassin666]

احسنت صنعا برافو بجد جامدة جدا بس يا سلام بقي لو بتتكلم تبقي اجمد

[@carstenehlert7617]

Super nice.. Vildt hyggeligt projekt Tak, kan bruges til mange ting. Tak :-) From Danmark..

[@arnavfootballfreestylerrid8050]

I very like this video very nice video and very enjoy video

[@MCsCreations]

Awesome work, man! Really good! 😀

[@fatihbulut9567]

This is so funny. I'm gonna make one. Thank you!

[@shashankupadhyay8935]

You are really creative

[@anilpawar8957]

Congrats for 2.1 million views

[@engineernabil3857]

very good job

[@akazad7245]

Yea

[@SpaceEyeNews]

this is very cool project

[@parvezparvez1606]

Congratulations for 1m

[@dineshvishnu2814]

Superb bro osm ideas..do more vedios..

[@lagaffe38]

Thanks , really cool diagram and code *****

[@jandenpasatiempo6260]

have issue whr only my boxservo moving and handservo does not, any idea why?

[@TheJoshuatuqvq]

Awesome thank you so much 😊

[@samielkharbaoui959]

Congratulations 1m subs !

[@LordAnubis0909]

Have to make it for my kid 😀😀😀😀😀

[@KenStentiford]

I wonder how much all the parts cost. Might look to make one.

[@bayuachmed6916]

So cute🤧🐾🐾🐾

[@tony4011]

Well where is the code then? I click on the link to download the compressed files and all I get is publicities.

[@rf2632_]

If you get the arduino board with the 9V jack connector you can skip the LiPo and the switch part as you can power it straight from the power adapter...

[@piotrgrygiel2506]

I’ve follow the instruction but my serwo worka only when is pluged to computer. I have 9v batery and the led is blinking but serwos dont work. Is the batery a problem? Do you have any advice?

[@cheesewhiz8008]

What is he using to cross the bread board with at the 7:00? Im trying to follow along and this is my first time with a diy electronic

[@cinhuu]

a small piece of the resistor or led leg

[@mrkva_jul6035]

OMG thats really cool bro XD

[@RiyaSharma-zu8rj]

My servo started working but switches aren't working. Previously box switch was working but now after assembly it isn't, tho I have used different switch and Servo Motor MG995 instead of MG996r. Servos were working before. Can anyone help me out please?

[@jaromirchartlinski7237]

Question: You have connect servos quiet different than in the Diagram. Why so?

[@indiandiyboyby-kanishk76]

The best I ever saw.

[@UdDReX]

Really loved it a lot. Its so funny.

[@isidoromaich7226]

Im very confused about this project, if you have the website Kenh Sang Tao.com why you have that folder KTS.com in 3:00? 🙄 The video was made by the transport company from usa?? hmmm very strange.

[@lucasryman5175]

Or "KTS" stands for "kenh Sang Tao"?!! maybe he just didnt want to write it completly, this way its easier.

[@savagesavages6410]

More like a fun box!

[@liz517le]

THANK YOU FOR SHARING THIS AWESOME TUTORIAL!!! I want to make one but I want it to play music when the switch is on...and is there a way to add flashing lights at the same time?

[@spencerharrisonx3700]

Do you think a 9v battery would work?

[@a_l_e_x9719]

I can not open the archive. "The archive is corrupt or has an unknown format" Help! And what size box?

[@VoltisArt]

Box size depends on components, the way you shape the arm, and what box you can find or make. It's a project that's completely customizable. You can make it using a human-sized coffin, if you like.

[@KomBinator_Yt]

Hello. The code is missing: pinMode(frontSwitchPin,INPUT_PULLUP); in the void setup. :) I have another question. How to change the code so that handServo is on the left side of the hand and not on the right now?

[@haritsuddin5887]

Hey if i change the servo motor to servo sg90 9G is the code still the same or its a completely different code

[@cinhuu]

Same

[@douglaslobato7491]

O melhor que já vi

[@idlegenius748]

Mini solderless prototype board= mini breadboard

[@sacagrosady9761]

Beautiful toy, I can use a Futaba S3003 digital servo instead of a MG996R ? And Can I replace the 2S 7,4volt battery with a 9volt battery ?

[@M0nja11]

did you try with the S3003 digital servo instead of a MG996R? what was your result?

[@cinhuu]

Yes, but Futaba with 9v didn't work for me. Lipo battery is more stable

[@akshay_dapke]

*Amazing* 👍 👌👏👏👏

[@nejcjamsek9806]

What kind of DC jack is that, if i google it I can't find it? Please help.

[@Juanruizsalamanca]

el enlace de descarga no funciona

[@jasveersingh29770]

Perfect and funny thing 👍👍

[@WonderLangxyz]

Great! This one is really fun!

[@ahamedfaheem6237]

awesome dude😨😘😍

[@IgorPeshkov]

Thanks for explonation

[@jacsonsousa3502]

Muito bom esses seus vídeos

[@Xillwill24]

what is 2S 7? listed in the parts section. I wish you could have linked all the parts but it's all good. Just need to know what it is so I can find it. Thanks!

[@tristianvarnell4426]

Yep. Still looking for battery here

[@jitendrashaw299]

Very nice... 😮 Wow

[@nachopinamar]

9 v ? In the diagram ? The servos burned... max 7v ?

[@eftigamer7695]

love your channel

[@emily91303]

It’s like creating a panther mask head.

[@zeeshanshaikh1367]

I love it bro😘😂🤣

[@victorhurtarte7563]

Very good project!! Great explanation!! but I have a question: How to vary the servo travel? thanks in advance for your help!

[@unvraigilles7405]

On the diagram there is a mistake. It indicate a 9v battery but its a 6 to 7.4v battery that you need. If you put a 9v battey you will burn your servomotor.

[@arcanine_enjoyer]

the nooklings in ACNL when you sell to them instead of ReTail

[@stalker2993]

This woulld make a great gift

[@panther__yt-samim]

Very beautiful

[@stoverfilms453]

Can 360 degrees servo be used for this

[@peneroboboy4318]

Nice 1 million subs

[@dimasary1416]

what could I use, mini servo and arduino nano ?

[@dimasary1416]

pleas help me

[@jc-aquatics191]

You bastard, as I was doing it I was like the light goes the other way, and then finally I see he switches it

[@juliussteffens7537]

Seems like the download isn't working properly. I get the error message "Not a valid RAR archive."

[@raedrusding8359]

What is the specification of the box

[@danpye9491]

I followed the wiring diagram and uploaded the code for the Ardunio but my servos seem to be operating independent of the switch on the front of the box. The both move even if the switch has not be flipped. Any ideas?

[@cinhuu]

noise in the servo causes this

[@Attitude-bh7xk]

I love this box

[@criarttub2153]

Sensacional parabéns

[@codegame3171]

Asalam u Alaikum. Bro.. I am Fan of ur projects.. Plz. Do one favour. Change ur logo now.. Upgarde it.. Thank u

[@franswuharmbruster2015]

If anyone else is building this box, please get in touch with me. I am having difficulty with the electronics. I get a flashing LED and nothing else! Also, I have extra LEDs, and would like to illuminate the inside of the box during cycles. Does each LED need its own resistor?

[@cinhuu]

yes, each led needs a resistor

[@amritasharma1858]

Amazing bro