DIY Van Shelving: How to Build Custom Plywood Storage for Your Vehicle

In this step-by-step tutorial, I'll show you how to build custom plywood shelving for your van. Whether you're a contractor, delivery driver, or just looking to maximize your vehicle's storage space, this DIY project is the perfect solution for organizing your tools and supplies.
Using basic tools and materials, I'll walk you through the process of designing and constructing bespoke van shelving that's tailored to your specific needs. You'll learn how to measure and cut the plywood, assemble the shelves, and secure them to the walls of your van.
By the end of this tutorial, you'll have a sturdy and functional set of custom van shelves that will make your work or travel easier and more organized. So grab your tools and let's get started!

[@michaelregulski6496]

Nice work..

[@G9RGE]

Thankyou Michael

[@gavincollins9376]

I gave my shelves a 15* tilt back, so boxes of tools won't fall off when driving. All the best

[@G9RGE]

I have done exactly the same in my own van, been like it for years and boxes have never fell out. Amazing how much space you save having it shelves isn't it.

[@daniel-1998]

Hi how do you tilt

[@linksone6287]

Hi mate, I’ve got a Peugeot Expert, how much would you charge for just a one sheler?

[@chimuanyachris3368]

How did u secure it, I really love your work

[@G9RGE]

Thankyou Chris, I use self tapping metal screws and angle brackets where needed. these are screwed into the sections that are double skinned

[@chimuanyachris3368]

@@G9RGE thanks

[@abrarhussain8527]

Zzqqknew 😅

[@bhleblanc]

Drawers on the floor of a van never work, always something in the way when you want to use the drawer

[@waynedunne4838]

Where did you screw the back of the shelving units to mate?

[@G9RGE]

Hi mate I used any double skin section. Just make sure your screws aren't too long so.they don't pierce the outside

[@waynedunne4838]

@@G9RGE ok thanks

[@skopjemk]

What is the thickness of the plywood?

[@G9RGE]

I used 18mm

[@skopjemk]

@@G9RGE thank you. I am getting ready to build for me my van

[@G9RGE]

@skopjemk I have had 18mm in my van for 5 years now and it's still structurally sound and I haven't had any issues although I plan to to redo it to accommodate all the new tools I have

[@skopjemk]

@@G9RGE I have large Sprinter van and was thinking how to do it.

[@paulvekony3293]

Hello mate Where you based?

[@G9RGE]

Hi Paul, I'm in Bournemouth

[@andreoferguson4217]

How do you fix it to the van ?

[@G9RGE]

I use self tapping screws and angle brackets where needed. these are screwed into the sections that are double skinned

[@RizwanIqbal-pf8yd]

Hi how much would you charge to make this shelving I have the same van ? Thanks

[@ploccb12]

Nice work What would you potentially charge for this.

[@G9RGE]

@@RizwanIqbal-pf8yd I would charge £600 for this

[@G9RGE]

@@ploccb12 it was around £400 labour and £200 in materials

[@Mike_5]

Proper job here well worth £1000 plus (VAT excluded!!)

[@G9RGE]

Thanks Mike, I really Enjoyed it and wouldn't mind doing more. Wasn't sure on pricing 👍

[@Mike_5]

@@G9RGE Good for you Buddy there is a huge demand for this type of van racking

[@G9RGE]

@@Mike_5 That's good to know, is that what you do?

[@Mike_5]

@@G9RGE No Pal i am a specialist Driving Instructor but i have friends and neighbours who work in the Trades and always want a bespoke setup like this done for them

[@G9RGE]

@@Mike_5 well thanks again for the advice 👍

[@fredjoyce4914]

How much do do mine please

[@G9RGE]

Where are you based, I'm in Bournmouth