DIY Wearable Iron Man Arc Reactor with 5 Interchangeable Faceplate Designs (3D Printed)

[@FilamentWizards]

I love how simple the electronics are

[@das_it_mane]

That's pretty sick!

[@shareahack]

Thanks dude!

[@stevenA44]

I had already made the decision to print one of the other models before I seen yours. I might print it later. I like the 2nd design plate in yours. I do like the one I already printed, mainly due to the clips where the red magnet wire wraps around them. I just think they look nice.

[@Pourkhoa]

This is awesome! Definitely need to try my hands at this.

[@shareahack]

Thanks! Let me know how it turns out 😎👌

[@kashgohel]

A dimmer switch would be a good addition. You could ramp up the brightness gradually. I made an arc reactor using one.

[@fiznits237]

I made one. It looks so cool and I used a 12 volt battery pack to make the lights extra bright.

[@HunterMcDudeMan]

Just made one of these but I'm modeling a hole in the middle so it can be used with magnets so it looks cleaner. SUPER COOL!

[@anubhavvashishtha9979]

You deserve much more, dude.

[@CoolRetro1234]

I love your videos. They are really interesting and enjoyable to watch. Keep up the hard work!

[@shareahack]

Thanks! Glad you enjoyed

[@IWETROBOTICS]

Awesome

[@torpedoxd7123]

My favorite arc reactor design is the Mark 50 reactor.

[@braydenbrennan7452]

Thanks for this video, got be pretty excited so I learned to use fusion 360 bought a 3d printer and made a full arc reactor model with lights

[@RahulJC]

Should have watched the video before i started printing and assembling.. thanks for the amazing work!!!

[@echo_is_probably_sleeping]

14:18 is my favourite design. Also, this is super cool! Great job! Unfortunately, I don't know a thing about 3d printing.

[@Gismoman2000]

Nice job done🎉

[@ksj95122]

honestly i'd love to see a redesign of this w maybe magnets

[@Prokid472]

Same

[@rajeshmakadan8645]

This is a very nice video and arc reactors

[@piyuminisansala-u8v]

verry good

[@piyuminisansala-u8v]

super

[@piyuminisansala-u8v]

super idea

[@danielsun55]

Quick tip: you can get a 9V battery connector from an old 9V battery.

[@tamannatoor4718]

The mark 85 arc reactor is the best

[@crazyman5541]

How do I test if the ring light works? I’m waiting for the other parts and I just wanna make sure it works

[@kelomaklms5749]

3rd face plate is my favourite…

[@sayalikshirsagar3477]

My favourite arc reactor design is mark 1

[@MayonnaiseVirus]

How did you get the middle light to be that bright? Every time I connect the outer light to the middle light the middle light gets dimmer than before.

[@bizzybdj]

fixing to print this. nice stuff. what is battery life

[@sigmamale7512]

14:30 is my favourite design.

[@jasongradyphstiger6179]

My favorite is the iron man 2/the avengers arc reactor design.

[@Mando76]

For some reason my center light BARELY lights up when it's connected to the ring... but it works by itself.

[@Olywerdraws]

I love it!

[@Arc_Seven_Review]

Awesome!!! I would be like that.

[@rajeshmakadan8645]

I like the mark 5o

[@MEMESRAINTV]

Nice bro love from Kashmir

[@thomaslong9061]

Also do you happen to have a part number for the small center light panel?

[@shareahack]

I got the small center LED arrays from Amazon: amzn.to/3jdNVF8 A full parts list can be found in the Instructable: www.instructables.com/id/Iron-Man-Wearable-Arc-Reactor-Under-Shirt-5-Design/ Thanks again for your input I really appreciate it!

[@celsodeleon4062]

Did you use just white lights? Or did you add a blue?

[@gimpact95]

It awesome bro...

[@MovieXplaineRAmith]

Wow❤

[@manishasaxena7665]

14:46 my favourite design

[@ridzwanirawan_]

I think if you use a magnet to stick it on the shirt it will be more portable. and add blue light to make it more realistic. anyway i will try it, thanks for the template

[@totdestroyer7151]

Using a magnet is a bad idea, ive made one and the magnet attached to the shirt pulled the shirt down and shofted to much, the harness is a better option because it keeps the reactor in place

[@sigmamale7512]

Can the size of the reactor be changed

[@thomaslong9061]

Awesome design for guys!!! but I am not sure it would work for women a design more around 2, 4, 9, and 10 would work with a single forway connector in the back would work better and may work out better for both as it might not want to ride up as much

[@shareahack]

That is a really good point Thomas! I will experiment with some willing guinea pigs and hopefully the Thingiverse posting will evolve over time to accommodate all use cases: www.thingiverse.com/thing:4544459

[@madebudiarsana5925]

Were i can buy that

[@keunyoungpark3478]

maybe you could make the light powere by a battery

[@potatoboy__2013]

14:32 where’s that face from? It doesn’t look like the nanotechnology reactor because he also has one of those

[@AnthonyDemuth]

How much would you charge me to build one for me

[@IWETROBOTICS]

This is amazing. I also built an Ironman suit u might wanna see it 💪🏾😂

[@berkcan3475]

thats pretty cool, it would be perfect if you just print them smaller just to not get mocking looks ;)

[@shireensultan6335]

All arc reactors

[@seankeilberg5631]

all of them

[@rafystarkpr]

Great video. A friend of my and fan of my geek culture Channel... Is made this project for me by my character on my channel. So, the only things I need to buy, is the circle light and the center light. But I have, two question for ask you. First... What is the liquid spray under the circuit electric and for why? And second, do I can put a better source of energy... Like four battery AA to the leds... For more energy and bright? Thanks

[@off-gridscandinavia4048]

Has there been some DMCA on Thingiverse for this? I keep getting an error after a few seconds on the page, not matter the browser or country I'm opening it from. Other makes on Thingiverse work just fine. :/

[@shareahack]

Hey! That's really strange...The Thingiverse listing seems to work fine for me, maybe it's just because it's a new addition? Not sure. I manually uploaded there files for you here: shareahack.com/link/arc-reactor-download Just click on the blue "download" button for the zipped package. Let me know if it works for you.

[@off-gridscandinavia4048]

@@shareahack, thanks a lot :D

[@wfrederi67]

I'm getting the same type error. 'WordPress Error 500'

[@monstermike1984]

Why go through all that hassle and discomfort with a strap? Just use neodinum magnets. Place a magnet on the back of the prop and then place another magnet behind your shirt. The two magnets will connect and hold it in place on your shirt without all those crazy straps.

[@XIIITk]

The print files are no longer available?

[@shareahack]

Still available for free! www.thingiverse.com/thing:4544459

[@XIIITk]

@@shareahack Tks, partner. I owe you one

[@rajeshmakadan8645]

My favorite arc reactor is the 3 one which has put on your chest

[@mr.creator7725]

You could have just used magnets to stick arc reactor on your vest instead of that long strips

[@macspencehand]

Mark 85

[@PrestynCreates]

I have a full tutorial on how to make a iron man chest if you’re interested here’s the link m.kzbin.info/www/bejne/b5-Ue6SXoa1prLM

[@abhaysingh5046]

I think people will notice the strips 👙first before the reactor.🤐

[@8-bitvibing814]

Can I have this??? For real tho.

[@InfinityWorkshop]

You can make one of the original one.... Mk1 arc reactor.... Without any 3d printer

[@8-bitvibing814]

@@InfinityWorkshop thanks.

[@InfinityWorkshop]

@@8-bitvibing814 welcome

[@Exitz909]

Can you buy this I want to fool my friends!

[@nihgtzero]

Yeah iron bra!!

[@connorringling]

Is anyone making these and selling?? I would if I had a printer 🥲