DIY wheel made using 100 nails

Our instagram / garage__54
DIY wheel made using 100 nails

[@rub96ben]

the evolution of this channel is nothing but inspiring: they burn the rulebook, get their hands dirty and are not afraid to break a leg. nothing but respect.

[@DemeDemetre]

people suggest

[@bakedandsteaked]

Actually looks legit as hell from a distance

[@the_kombinator]

Sounds like every car I ever rattle canned ;)

[@MonkeyWrenching]

Actuate description of most my exes

[@m.b.82]

@@MonkeyWrenching good from far but far from good.

[@the_kombinator]

@@MonkeyWrenching Hahhha - Mine were generally good from about >1 ft away ;)

[@Micharus]

It looks OK in the video, I'd make a full set of them, balance them properly and see how they go. Even just painted black it looks really nice.

[@davewsh8434]

I would never think about this but Garage 54 did

[@AmongUs-mb4qx]

Atleast they're not sitting in front of the computer writing shitty comments.

[@donellmuniz590]

You can be proud of yourself 🤣

[@donellmuniz590]

@@AmongUs-mb4qx How ironic 😂😉

[@herbiehusker1889]

You really nailed this video.

[@brinesilver405]

alright then, there's the door

[@lukeFugate]

Nice!

[@DanielForrest]

You here all week?

[@abpsd73]

Ba-dum-tiss

[@blackheavyblans]

Underrated comment

[@LSniumUwU]

I love how these guys work soo hard for youtube experiment videos.

[@connar8764]

Go big or go home, right?

[@lordred7462]

theese videos are free commercials for there garage and custom work

[@EweChewBrrr01]

"How much did all those nails cost?" "Nothing. They were a stealy"

[@gabrieljordan9977]

Nooo I cant believe I read this joke

[@EweChewBrrr01]

@@gabrieljordan9977 and then commented on it. :(

[@donellmuniz590]

(groans)🙄

[@DemeDemetre]

@@EweChewBrrr01 ok...

[@ianstoys13mgs]

Looks good, I would have drilled holes in the rim to pass the nail through and then weld the "head" in inside.

[@UberLummox]

That woulda been fun drilling 50 fucken holes in a round, thick steel object! : ) I'm sure they thought of it though. Probably the much quicker way was because it was an experiment.

[@cobravids]

Great Idea, cleaner that way.

[@the_kombinator]

Yes - less weld boogers.

[@graemew7001]

That way runs the risk of not sealing the holes up fully and having to run a tyre with an inner tube installed in it to maintain tyre pressure, this way is better in my opinion.

[@UberLummox]

@@graemew7001 I'm a welder, and all you'd have to do is make sure you have good, deep penatration and it would be fine. And just to make double sure, put some sealant goo around the welds for a 107% success rate. ;-) That way it would be garunteed.

[@Wildstar40]

I would have like to see how this nail wheel handles the torque on the drive axle. It looks good though.

[@thetorchchannel357]

@LincolnTek I agree. Would love to see this wheel torture tested !!

[@JM-yx1lm]

It would handle it no problem

[@Hitycooking]

kzbin.info/www/bejne/bamteJJ_oJaphbc

[@bernardfender5147]

The nails should be hardened or annealed steel at least, it's the welding that most likely to fail I'd say..?

[@kg4boj]

@@bernardfender5147 A proper weld will always be stronger than the parent metal and if done properly and the piece forced to failure the part that breaks will be the parent metal and not the weld.

[@an_andrew2]

How is it possible that a channel like this one, doing crazy experiments and medium-high quality videos only has 500k subs?

[@shitpostcentraI]

I can't tell if you're joking so I'll just say it: Their main channel has over 3 million subs, this just a dubbed channel for english subs.

[@an_andrew2]

Yeah, I know. But I keep wondering why they have so many fewer subscribers on this channel, even if the English community is so much larger than the Russian one. PS: I'm from Spain

[@ALEX-wz8ts]

These dudes never...ever !!!! run out of ideas...thats pretty kick ass..

[@freesoul9324]

For the first time, Garage54 makes something nice.

[@hydorah]

Will that Merc ever get an interior I wonder?

[@BruceLyeg]

Upholster it in veal naughahyde. It's like naughahyde except it comes from baby naughas

[@hydorah]

@@BruceLyeg Haha! Or maybe Put a Lada interior into it... Or maybe wooden benches

[@bernardfender5147]

As soon as one is "borrowed" from Germany!!

[@twoeightythreez]

They should put another bucket seat in backwards so the driver is looking out the rear window. Hook steering up via a bunch of u joints and pillow blocks! Use a RHD steering rack and keep brake and accelerator on drivers side. That way the 2 drivers would need to communicate well. There would be a throttle and brake operator who would call out to the steering operator which direction to turn.

[@Test-gq4ts]

Does anybody know exactly what Mercedes this is? I can't figure it out bec of the head lights o.O

[@bshinn4884]

Jesus 95% of the shit they do is pure force of will and determination. And they try to do it right, spending all that extra time on the details, like sending EVERY DAMN WELD. Bravo. Y'all need 50 mil subscribers

[@estate86]

Normal American Hundred Spokes : Daytons Russians : B L A Y T O N S

[@gabrieljordan9977]

When the Garage 54's imagination will end??? Answer: NEVER

[@Albrecht8000]

Looks absolute PERFECT - like original! Greetings from germany

[@Bob-Whiting]

Best wheel yet. Keep up the good work.

[@thedarkknight1971]

It was a really nice surprise to see a very tidy condition Kawasaki GPZ600R.... I had a GPZ400R and GPZ600R once, both great bikes... 😎 another great project on the wheels too, nice touch with the centre nut, similar to the old British cars - Jaguar, MG etc etc... 😁

[@SerPurple51]

You guys have become pretty damn good at making DIY wheels. Never fail to entertain!

[@stevemweu2668]

That piece is legit Damn!! Watching from Kenya....kudos garage 54

[@55zodiac55]

-Hey I need new rims! -You already have new rims at home. *The rims at home*

[@scottinWV]

Their wheel building is getting better with each one.

[@roshi_4209]

ok now do exactly three of the same XD

[@Rebar77_real]

I think they meant 3 more. He's high. Me too.

[@dutchepperson2727]

Them guys got for real skill and talent. I can never get enough of your channel. GOOD JOB

[@scrapironfish]

I love this channel. You guys are always putting up new, innovative, and well put together content. Your channel should have way more subs than you do. Thanks for everything you guys do for us subscribers. Keep up the good work.

[@marsrover001]

First project I've seen that I would actually consider a success.

[@reallathrillarainingpainov5472]

You guys can start a business called rims 54

[@jeezass]

Rimjob 9000

[@jacklarson6281]

Ive always loved the look of those old school wire wheels

[@MMWA-DAVE]

Very clean looking w201. On the rare occasion I see a Lada driving around in Western Australia, I think of this guy and smile. They were officially sold here, the Niva anyway.

[@televisionandcheese]

You got ladas officially too ! You had the UK export variant of the 2105 , and the same for the Samara (2108 & 2109) But if I remember the 2105 had no change from UK variant, so speed was still measure in MPH ))

[@alansailing1387]

Worked a lot better than I was expecting, looking forward to the chrome variant.

[@38911bytefree]

Nice fabrications skills !!!. Really love these crazy rim ideas ... but hard to kick the one made with rods ... pure art.

[@brettconv83]

Incredible how well looking it turns out for how they throw it together. Much love and respect from USA 🇺🇸

[@Gamen4Bros]

That actually looks SICK!!

[@Kenji1685]

Awesome idea! I imagine it would work great with aluminum parts too, with more nails.

[@edwardshaylitsa7127]

I genuinely enjoy watching this channel grow

[@netmatrix75]

Those wheels are SICK!!!! 😍😍😍😍

[@watajob]

That is REALLY cool! :) I'd rock a set of Garage 54 wheels.

[@raceforspeed]

This looks like an awsome wheel. Pretty Cool on that Mercs.

[@eggbag4182]

Such a great paint choice to match the car. Would look so beautiful with four of those wheels.

[@tallyankeegal]

self puncturing tires?

[@Wildstar40]

Yeah turning nails into wheels goes against what every tire flattening nail used to stand for.

[@benjaminsmith8058]

This is awesome Garage 54 is pretty close to making thier own custom parts ! I hope they do go further every video I watch I get more impressed with them even the wacky goofy stuff too they really push the limits on things and killed so many ladas, covered a truck in concrete , they do everything most guys dream of doing! Wish I knew how to speak Russian because It would be cool to hang out with these guys!!

[@IgnisMan]

Look's not Bad 👍 the official Garage 54 Wheel 😎🤣

[@fxmxrx1385]

Man, this black Merc is beautiful!

[@stefa_]

Looking forward to seeing the end product :D

[@38911bytefree]

The first seconds .... I though BMI Russian let us down !!!. Hopefully not !!!. Crazy video as usual

[@J3n555]

That 190E is cleeeeeean

[@Bourinos02]

That rim looks very nice, love it!

[@ttxela]

That came out looking very good 👍

[@jlco]

You need something like a small disc of metal to cover the center welds. They look a bit lumpy when well-lit. Aside from that, it looks pretty legit.

[@Ty_____G]

Excellent Garage 54. You never fail to amaze us😍😍😍😍

[@edgelhoover883]

I would love to have a pair of wheels made by Garage 54,great job.

[@benji-DS]

Я приехал из Швейцарии, но мне очень нравится смотреть ваш канал. У тебя всегда такие😆 безумные идеи. Вы делаете то, о чем я всегда думал в детстве.💪🏽👏🏽👍🏼🛠🔩

[@whatcouldgowrong8323]

Excellent! I wonder how they would perform in rougher terrain and on the rear of the car or on a 4 wheel drive? Great skills and ideas.

[@MarekKubi]

Good therapy for me, watching that.

[@timdummer9049]

I love your Mercedes. such a beautiful classic

[@realobiewan2918]

Haahaa! Sharp, like a Nail! Stop, my sides are hurting!

[@raymondlidy5918]

Great job guy's you's nailed it looks good on the car

[@markhodgson2348]

BMI i love you choice of sound track in this video and the subject is awesome

[@nething1087]

You guys should put all your home made wheels on the same car all at once.

[@drbuckshot7732]

Instead of those really bad bugger welds, they should have drilled holes in the rim and just put the nails thru the hole and weld it up so you cant see the welds, tire will cover it

[@ricky107_]

Yeahh

[@graemew7001]

That way runs the risk of not sealing the holes up fully and having to run a tyre with an inner tube installed in it to maintain tyre pressure, this way is better in my opinion.

[@giovannogalindo8785]

@@graemew7001 you could easily seal them up with silicone real wire wheels are sealed on the inside to prevent air from leaking out

[@1one3_Racing]

They've gotten better at making wheels because they stopped letting Cyril near the welder!

[@mustangpapi76]

Best wheel yet 👍

[@johnsimun6533]

That is one sharp looking wheel.

[@Canleaf08]

This needs to be in the Zubehörprogramm of Mercedes Benz.

[@rahoffman123]

Bad as rim the coolest homemade rim I ever seen

[@jasonbickford4283]

Pretty freaking awesome!

[@Paulman50]

Best one yet I think👍

[@giobeamo1246]

It actually looks rlly good

[@mrcomenttoe2009]

Man you made a beautiful wheel good job guys

[@djpainkiller3326]

Now we just need three more matching identical one and more complete

[@DomVito87]

You guys are creative af

[@2strokeguru]

Wow great job you nailed it

[@Nottsmodifiedcarchannel]

Them wheels look mint 👌

[@rodneybadger734]

Good looking wheel when all painted.

[@salvadorflores7438]

That wheel actually looks fire lol😂

[@antonchigurh6590]

Pretty neat!!!

[@johnnyjimj]

Niiiiiice! 😎 You could also drill the rim and insert the nails through the holes and do the same with the hub and then weld, for better precision and a nicer close-up look 👍

[@MikinessAnalog]

That could be more than a few places to lose air seal though.

[@johnnyjimj]

@@MikinessAnalog Good point, but that problem should be easily taken care of using rubber caulking or gluing a strip of rubber on top of the nail heads.

[@washa2624]

Looks wicked 😎👍

[@bernardfender5147]

Triple black Merc, very 90s tinpot gangsta!!

[@adventuresofsven2314]

I love this channel.You guys are awesome

[@Darctan1]

so no-one talking how clean that w201 is?

[@69strokefasterthanyourmum]

So now the poor Gs in the hood can make their own!😂😂😂 Love those wheel videos guys!

[@Crepypastin2703]

A great job and it looks great too ... I would like some like that but chrome for my volkswagen gol ... xD

[@Sknwlker]

That Benz looks sick from the outside

[@thejariilho931]

I'm the first view nice work garage 54 supporting u 😁

[@rayceeya8659]

When are you guys going to finally buy a plasma cutter? Seriously, it would make that kind of work so much easier.

[@deeaikens9843]

It looks good in that dark color

[@quadbc4059]

I like the new shop👍

[@midnightdrives5112]

Dayton wheels would be proud!

[@edgarfernandez-chavez9581]

Videos are great keep up the good content 👍🏽

[@Gres-iu2iw]

cool merc nice wheel looks good

[@garrybeard7718]

Awesome channel well done guys.you lot never cease to amaze me .👍🇬🇧🤘🍺😂🤣

[@2468TROY2468]

the "how would they know" tiktok meme keeps playing in my head

[@marcelosanches3397]

This time you made some serious stuff. With a refinement on welds and chrome finishing, you'll have a really nice low-cost lowrider wheel

[@nikbivation]

that was amazing!

[@zsombor_99]

Make another 3 of this wheel and let's see if they can support a car or not. 😉 And also a chrome like finish would look nice on this wheel. 😉

[@warrior8154]

*Nailed it*

[@mathbc1984]

A perfect built !

[@kevinkirk4285]

No Ladas were harmed in the making of this video.

[@NATEDOGG175]

Do 3 more, do a full set!