We make gliding square wheels for a car

[@MegaSockenschuss]

Please do all 4! ...and maybe make the wheel arches square too, for the sugar on the cake.

[@UmmmmmmmWhat]

​​​@@Room1sixtyfive gear drive from drive shafts to the chains inside the square wheels somehow then a brake on the driveshaft similar to how they do it on gocarts (and monster trucks). You'd obviously need the wheel hub mounted to spin free from the driveshaft powering the gears so it stays bottom side down.

[@VintageCR]

all 4 cant work without modifying the entire car into a tank-like drivetrain.

[@MegaSockenschuss]

One can clearly see the newbies on this channel, they're using the words "can't work" or "can't make". 😁

[@catsaregovernmentspies]

​@@MegaSockenschuss"You can't have no in your heart, brother"

[@mediocreman2]

Sugar? WTH? 😅

[@Topsiekku]

Get that 2 stroke engine ready

[@riz3nfpv306]

Bruh- a step too high I thinks

[@mrjed6912]

I really want to see it run. They should've converter that 2 cylinder lada engine into one.

[@wolvenar]

I think they did that one a long time ago now and are just getting the videos translated

[@yzstormer]

​@@wolvenarBMI would normally say if the video was uploaded a while ago.

[@shawnsatterlee6035]

@@riz3nfpv306 bruh! 😂 Grow up homie! Because bruh, bruh 😂 I assume u live in ur parents basement bruh 🤣😂

[@BlackPill-pu4vi]

Garage 54. Answering the difficult questions before you even ask them. And part of the answer always involves Ladas. I'm OK with that!

[@mann_idonotreadreplies]

Ladas sucks though

[@TheSilverShadow17]

​@@mann_idonotreadrepliesNot when used as a test dummy it doesn't lol

[@737Garrus]

Incredible wheels! Make a set of driven wheels for the rear, and keep them until snow comes. I'd love to see how they fair through snow!

[@3rdpig]

Nice job! Doing this on snow or sand would have been a lot better. Definitely do all four, but make the next version triangle for better clearance, leave more room between the treads for self cleaning, make higher sides on the boogie wheels to prevent throwing a track. Also, you're going to need to add a hydraulic cylinder to the steering.

[@timjohnun4297]

How do you put drive to a square wheel though?

[@tifreak8x]

@@timjohnun4297 Would require some modifications to the driveline. The wheels would need to be mounted in an independent suspension style setup, and the driveline would need to be connected to the chains that actually spin the treads, like you see in the first part of the video with the bicycle.

[@arklanbk]

@@timjohnun4297 just have the rim spin inside the square frame

[@jakertheelaborater2573]

Build the rear square or triangle wheels would be exactly like snow tracks on something like a serious 4x4

[@jesseerickson662]

Yes with a longer base on the bottom side of the triangle. I can think of too many ways to type to make the rear wheels drive.

[@Monni95]

Needs shorter rubber strips in the middle to make turning easier. Like others already said, adding more clearance between the strips makes it more resilient to pebbles and other hard material getting stuck between the strips.

[@GulliJ]

With care of small radius, non geared wheels, no tensioner, it's a success!!! Now you need to add a tensioner and change the radius. It might be turn by a ¼ at each bump if too small, and tensioner is needed for higher speed to avoid chain jumping out the small bearing side, and finally the hardest job: made 2 for ear that included a geared hub to drive them all, Made it other way than triangular design will be hard, but doable ! Why not add a flat band of tires over the small rubber band for better looking and a bit of confort from ground to metal parts... I love this creation ! One of the 10th best from Garage54 Have fun Cheers from France 🇲🇫

[@whyjnot420]

Doing all 4 would be awesome to see, but would be a pain to actually make. Which makes me want to see it even more.

[@bbracing3925]

8:41 HaHa - Stopped it dead in it's "tracks". Good pun 🤗

[@squalosus223]

IMO, you guys have the most unique content of all car youtubers. So G54, if things get too sketchy in the Motherland, you're welcome to stay in all our guest rooms!

[@jacobcannon5887]

The wheels look like they need a belt tensioner for the chain, at higher speeds it looked like it would come off easily.

[@Salmon_Rush_Die]

Do all 4 then show us snow driving this winter. That ought to be amazing in the snow!

[@TheRealdraudE]

Square wheels on a car are "squeels"

[@GorlockSlayer]

Good luck finding a set of squires

[@GrantJohnston-g8p]

Take it round the tire shop!​@@GorlockSlayer

[@GT-fi4sk]

The amount of time you spend on these projects is amazing .

[@felipesuperti8299]

Now this is some very sovietic Lada. Well done! 🎉

[@mann_idonotreadreplies]

Lada is French

[@brackman71]

If you attach rubber strips every 3 or 4 metal strips, you will solve the problem of the pebbles and the dust kicking up. The dust is being "pinched" between the rubber pieces (the same as the pebble that stopped the car) and is being thrown, pinch-by-pinch, into the air which is why there's so much dust.

[@jamest.5001]

The strips need lap joints, like dozer tracks! The rear should be fairly easy with a link connecting to the trailing arms, or leaf spring mount and a link to the diff, possibly the shock mount, and 'mabe with the backing plate for the brakes, then a couple pair of spur gears to spin the track, possibly bolt another axel to the hub, with the spur gears gear between, use the beaton the axel to mount the square frame! Allowing proper weight transfer, cutting off the excess axel of course!

[@legendaryra3590]

Exactly, this is why the pebble got caught. They need to be a bit more durable too, the strips were shredded after a quick test drive

[@tommyhallum2054]

I love your content and you guys are great fabricators. I hate to be the guy to bring it up but I hope all the young men who work for this channel or work for your shop are somewhere safe and/or are home. Where they should be. Sending love from the U.S

[@DKC0994]

Do all 4! This looks sketchy as hell and im curious about how you are gonna solve the issue on driven wheels

[@XTripleJaxX]

anyone know if the music used in these videos is made by the editor?, and if so what VSTs they use?

[@catb50]

I'd love to see what happens when you go over a speed bump, or up against a curb. How would they react would they handle. They would pivot on the original wheel bearing hub to help? Of course now you have no braking up front haha

[@CrucialFlowResearch]

With te smaller radius, it may not be able to climb the vertical jump of some bumps

[@aevans3977]

You guys are crazy! But also genius and engineering masters! Love your ideas and videos, you're the best!

[@xtuddy]

"be there or be square"

[@AnalogDude_]

Congratulations reaching 700K followers, i recommended the channel here and there to show Russian are good and funny people. Great build.

[@barrelracer318]

If it is not unusual or crazy. It is not Garage 54. Keep up the awesome stuff. Glad to see each new video.

[@mybuickskill6979]

Russians getting on like we do over here with the trade proposition makes me feel like we have a lot more in common than we have differences. Now to make a drive wheel set and get the 2 stroke running 🤗

[@travisanderson5521]

Cut the bottom front corner, so the tread can climb stuff like a tank.

[@lulamorton5953]

You all never cease to answer questions I never asked. Love the channel.

[@superspak]

Keep up the great work guys. I love watching the techno metal fabrication montages and chilling 😁

[@nicksmith1415]

Aw my mate's dad had a thing for Ladas back in the 80's despite his son's embarrassment 😂, now I love them ol' classics. This is genius 🎉❤ @Garage 54 loving the fact that Russians say Holy Cow! 😂😂😂😂😂

[@tonythemadbrit9479]

Big contact patch would be great for the driven wheels of a drag racer

[@willmatic84]

Congratulations on 700k garage 54 🎉

[@R3cKi7]

this was the first video I have had in my feed from G54 English in a LOOOOONG time...was YT restricting videos from Russia because of the government crap?

[@Phantanos]

Try adding a jig with a stiff bristle brush; it could reduce or stop the pebbles and dirt from being sprayed forward.

[@LoveWins]

Fun fact, back when i was in public indoctrination camp, (public school) the class was given an assignment to reinvent the wheel and to explain why you designed it the way you did. I did this same comcept but it wasn't square it was triangle, the reason for me not doing it square was less surface area so it wouldn't take as much torque/force to spin the belt on the triangle tires. This reminded me of that lol.

[@QuantumLeap83]

Covering you all with prayer. May God keep you safe.

[@CrucialFlowResearch]

A circular wheel is the biggest radius wheel you can make inside a square boundary, this square wheel needs a smaller radius, so it has difficulty overcoming vertical obstacles

[@Mr.Robert1]

If the aliens can use flying pyramids why not

[@MAZEMIND]

Stay safe out there, and keep making kool videos.

[@ianbelletti6241]

I initially thought that it was going to be one of those odd shaped squares that rolls with the center point staying the same height. Instead, he did a square track layout.

[@m1activealesis551]

you should do triangles for the rear.

[@heztshow]

Please put together two transmisións simulating a Transfer case

[@BROSKIES1209]

Lada with tank track's 😂

[@amoniousbt1110]

Having these being driven is going to be an engineering task I'd like to see you build

[@stu0500]

Hurry and get the 2stroke 4 banger sorted. Square wheels will be awesome in the snow!

[@busyguy7479]

well u guys never disappoint this is a well put together idea. good work and u guessed it a lot of fun . kudos again to all of you.

[@pbocking44]

you could achieve the same effect at the rear by building a box which encloses the wheel - welded onto the hub, . Leave the bottom of the box bare so the wheel can still drive (and brake) the car, but be hardly visible.

[@plymouthmechanic3423]

Vlad, please use your positive position on KZbin to end the war. I want to keep watching your videos!! You guys make a smile on everyones face. You are the best link between east and west....

[@Goodkiwibloke]

Excellent work Garage 54. Keep trying out the wacky ideas

[@kentworch]

This was pretty cool. Love you guys for your interesting creativity.❤🔧

[@diebygaming8015]

This was one of your coolest videos yet imo.. Put the square wheels on the the rear of the car so you don't have to steer with them!! They do look like they are vacuuming the dust into the tracks when it drives

[@FatHulkRideEbike]

They are the same shape as box fans. You could mount some box fans on the outside to confuse people. Start of the fans before you drive and then drive away lol.

[@CommeradeZhukov]

I gotta say those old ladas look like they are legitimately fun to work on, I wish they were common here in the US.

[@N8DE420]

What happens in the winter time with them and can you make it to drive wheel?

[@bobhill3941]

Very cool, I've never see this before, it's basically square tracks. I remember watching a Mythbusters episode 20 years where they managed to make a truck (Ford F250/350) drive with square wheels and they got it going fast enough to where the ride was fairly smooth.

[@EnglishGamer2019]

Can you make an air starter for a Lada engine? I always wondered if you can bring tank tech to cars

[@catsaregovernmentspies]

Pneumatic?

[@onestopfabshop3224]

Definitely make drivers for the rear and test them out in the winter.

[@Mr.Robert1]

South Park.. Every wheel from Canada, is square.. Just a joke of course but they started that 25 years ago. That's when South Park began.

[@saltysavage3756]

That's frickin' awesome! I'm sure you guys can get the two drive wheels figured out.

[@slowcarshop]

im always browsing the internet

[@bacilluscereus1299]

These guys do all the stuff you want to do (but never will).

[@farmer87yj]

ya do the drive wheel that would be way more awesome ..just like having tracks

[@jesusyeshuaelelyonelshadai6295]

The track wheels needs some sort of dampers to absorb shock.. much like tanks or excavator tracks.. and needs a breaking system for tracks

[@djsweb]

Use gears and a big bearing to power rear wheels and tapper the edge of rubber strips to avoid pinching the dust and pebbles.

[@Adam-nv9zo]

Damn peebles. 😂

[@IceAge20017]

If I had a car company I'd hire these guys just to invent stuff and build prototypes.

[@frydemwingz]

Now I wanna see proper tank treads for this car

[@89Interceptor]

If you do all 4 wheels on that lada, how are you going to stop? or even get power to the rear? the current brake and axle setup wont work because the hub dosnt spin

[@jjhack3r]

Make a Detroit 2 stroke diesel style petrol engine that still has valves for exhaust only but has intake ports at the bottom of the bore. Needs forced induction. I recommend some sort of supercharger.

[@UraniumMan]

Yes, I was about to comment before you said you might do all four! Though I am skeptical that that tight radius will let you put much power to them.

[@josukejotaro548]

funny creation! reinvented the half track, good video!

[@lezandartex2054]

Me dan años de vida cada ves que los veo. gracias por existir!

[@OscarWithC]

Please do all 4 and take it to the town for the people to enjoy!

[@letsallbe-friends1120]

*Congrats on 700k!* 👍

[@correosergiodiz]

They can test to see if there is a problem if the water in the radiator is replaced by some light oil. I don't see any problem beyond changing the hoses that resist oils.

[@mlww5746]

I would love to see you try making the triangular wheels from the Landmaster featured in the film Damnation Alley.

[@onestopfabshop3224]

Yes, those wheels on the Overlander were way cool. Great movie too.

[@paradisebreeze1705]

I loved that film

[@arklanbk]

they already did something like this

[@ajl9491]

Yeah I loved that thing as a kid, got me into military trucks to of road

[@celuiquipeut6527]

Everytime i drawn a car with square wheels, I WAS RIGHT!

[@barleyeducated8714]

Just weld the metals bars to the car's wheel, then add the conveyor belting to the bars. Could be used on both front and back. A no-flat design. :)

[@powerbuilder0510]

equilateral triangle like those warning ones you use when your car breaks down or changing a tire, a pentagon with a pentagram hub cap because just cause. an octagon and a U shape one either like a U or upside down and a round one with a a flat bottom to make it look like a flat tire.

[@WilliamTaylor-h4r]

Thought the whole wheel would be secured to the flat, hopes and dreams. That lada has been out of the museaum for a quick minute. Nice

[@scorpion-in2xj]

See how they go on snow or ice in winter time 😊

[@toasthacker3484]

Try connect on each side the wheels with a curb chain and build a System to steer like a Tank

[@annfarmer9704]

yes! all 4 please! I HAD to hit the sub button! so amazing! if I lived closer I would totally volunteer to be you crash test dummy! curiosity and the imagination and experience to make it happen! absolutely LOVE it! have a great day! ♥️🙏♥️

[@sharp-1000]

You guys have entirely too much fun. I love your videos keep up the good work 😃😃

[@Gkuljian]

You geniuses! Yeah, do all four.

[@davestaco]

Much more complicated than this idling setup. It would be cool to see though!

[@TheHitmanAgent]

The camera at 6:29 is like: TADADADADADADADADADA. GO SLOWER! 😂

[@SharonD369]

Are you torturing that thing again lol that was funny 👌

[@deweyharmon4666]

You guys are the BEST!! 😂 Keep them coming friends!!!

[@carloscollomps1552]

Now the wheels combines with the car shape!

[@Pgplays20]

You’re crew is insane !!!

[@0wl999]

@Garage 54 Leave it to you guys to reinvent the wheel lol. Much love from u.s.a !😂

[@tougheedthomas9752]

How do the front brakes work with these 😢

[@Paavst]

do all 4. this will look so sick. make the wheel arches square too,

[@alexriofrio5754]

A tensioner and a chain lubrication system might help

[@darionerat3671]

Can you make this kind of whell on rear end? They should be stationary but with possibilities of transferring engine power to pavement.

[@adamhonda98]

How does the brakes work if the wheel itself is not rotated also also the actual rears ar gonna need some kind of drive gear for them

[@lesklower7281]

A very successful experiment it works and what a cool look all four wheels would look good

[@christmassnow3465]

Make all wheels into squares, and you have a car out of Minecraft world.

[@spaceportseven]

It's only a half track until you do all four, mental !!!

[@waterboy46]

Rear wheel drive with the wheels and normal tires in front will make look like a mini tank