DiY Wood Lathe from Washing Machine Motor

[@ЮлияБрязгина]

Балясина конечно никуда, а вот изготовление станка СУПЕР. Спасибо.

[@arasul]

My goodness! What an amazing project. Splendid indeed. You are very talented.

[@maxwellbarnhart1375]

I wouldve loved to have seen you include the parts where you mounted the motor and the electrical switches. Regardless, great build!

[@bigpete4227]

That’s pretty phenomenal.

[@juliojulio2843]

La verdad uno de los mejores videos de herramientas que he visto Muy bien hecho 👍 Como decímos en México Te quedó muuuy chingon Saludos desde Zacatepec Morelos México

[@CraftyDude]

Gracias hermano👍😎

[@timothyvanderschultzen9640]

I see that you have glued 2 nuts in the endstock assembly, one put in from each end. I imagine that slight season expansion of the wooden barrel the nuts are glued in must occur. Does rotating the shaft ever become difficult? Beautiful build.

[@CraftyDude]

As lathe is made from wood, it has little bit vibration any other issues did not occur till not now😎👍

[@alainbaudry1989]

Bonjour, merci de tout ses petits renseignements!!! okkkk merci Cdlt

[@CraftyDude]

Merci👍

[@lcoiro]

Awesome project and great video. No long blah blah blah talking intro, just straight into the build.

[@CraftyDude]

Thank you🔨🪵👍🙂

[@anglobricks9086]

That lathe is a masterpiece 👍🏻

[@bradleytuckwell4854]

One of the best lathe builds I’ve seen. Very clean lines and well designed you could say great eye candy. Dig your channel and content. Thanks for sharing this amazing build

[@CraftyDude]

Thank you Bradley, I appreciate your support👍🙂

[@leandersmith6184]

Nice work with an eye for design as well thanks for sharing from Mexico

[@warlyavila7912]

would be so nice if you could also share the project plan measurements and everything

[@thomashverring9484]

Holy. CRAP! Impressive build!

[@CraftyDude]

Xax😀thank you🤜🤛

[@ВадимКузнецов-з2й]

... деревянный станок, для деревообработки!-, это круто!!!

[@Mike-rb2kk]

This is incredibly inspiring. Thank you so much for this.

[@CraftyDude]

Thank you👍

[@myblues6532]

Very cool build but the wooden pulley is going to over heat the belt. A metal pulley is better because it will disperse heat faster and prevent the belt from over heating and breaking. .

[@TMullmann]

Fantastic Video. I am going to make this lathe very soon. I have the Miele motor and your same speed controller. I just need to know hoe to hook up the motor to the controller. Do you any videos or schematics on the wiring between the motor and the schematic? I would really appreciate it. Again great video and it looks beautiful!! Keep up the great work

[@Satyr713]

Also von mir, optisch, sowie funktional, grossen Respekt. Eine wirklich tolle Arbeit & ich hätte auch grad dazu noch ne Idee für einen abnehmbaren Anbau (auch zum schleifen). Gefällt mir sehr gut.

[@AReasonablePerspective]

Best lathe build on KZbin currently. _You fuckin smashed that bro_

[@VovichGP]

Was very interesting desigion with cutten nuts!

[@kennethjeromewilliams1354]

I rilly like the wood lathe you made, I really like yours

[@paulmacsweeney7429]

Awesome,DIY, project, love it so original

[@yassergohiny4691]

One of the best videos ever seen

[@lifefocus2168]

Good job!

[@KarloSandagerKristensen]

Very super Lathe. Best of all Home made.

[@CraftyDude]

Thank you👍🙂

[@Sammi_Akter_3010]

This is definitely something I need. Looks like a real timesaver!

[@numantemiz6763]

Hız kontrol devresi kullanman iyi oldu yoksa motor hızı çok yüksek olurdu . Eline sağlık güzel makine yaptın

[@CraftyDude]

Teşekkürler, bir elektrikli hız kontrol cihazı kurdum

[@darkosimic86]

Excellent work! I thought you were gonna make small knobs for moving axel first :)

[@CraftyDude]

Thank you👍 Maybe latter, need to get lathe chisels first😉

[@JuanGarcia-1125]

Pero qué CHULADA DE TORNO te has fabricado amigo! Merecidícimo like y saludos cordiales desde Reynosa Tamaulipas México!!!

[@JamesCouch777]

Slick rig and excellent job on the video 👌

[@stevensh8023]

Flawless build useful tool to the shop. Pls share plans if available

[@CraftyDude]

I didn't make plans for this project, parts sizing was made in building process

[@maryjocookson7156]

this is so cool, its too good to be used! What a lovely finish as well, thanks so much, loved the video.

[@CraftyDude]

🪵🪚👍😉

[@mikepullen8028]

Excellent job

[@thecelt4807]

Mozart of wooden manufacturing ...mind blown bro

[@CraftyDude]

Thank you👍🙂

[@owais146]

SPLENDID MAESTRO

[@rcadesystem527]

magnifique,je m'abonne je vais la construire cette beauté merciiiiiiiiiiii

[@هشامسعيد-ح8م]

The best channel and the best diy lathe

[@CraftyDude]

Thank you 😎👍

[@rubennaicker576]

Brilliant idea wow

[@dielatzhose1708]

Tolle Arbeit und auch noch schön anzusehen!! Sieht echt toll aus!

[@dudy8736]

Fantastic job. Just a humble suggestion: it would be nice to add a safety cover for the transmitter belt.

[@neneraroatuki9877]

Muchas gracias!!! 👏👏👏👏👏

[@pierluigimuratori7389]

veramente bello ! molto funzionale complimenti !!

[@serhataltn48]

nice video master machine plan ?

[@nerinojrmga]

I will make one like this!!! It was so beautiful... Thanks...

[@CraftyDude]

👍🙂

[@Creatorhandle-lc]

Bagus sekali teman mesin bubut kayu nya

[@tcarney57]

Nice build. I really like shop-made machinery.

[@CraftyDude]

Thank you! do my best😉👍

[@Albertodc]

From Spain congratulations

[@CraftyDude]

🤜🤛🇪🇺

[@joseguevara184]

Magician!

[@vdsmade]

SUPER JOB👷👍

[@369dusty]

Amazing build, fantastic look.....an A+++ in my book !! Great video !

[@CraftyDude]

Thank you Don👍🙂

[@michaelburnette3199]

Good job I like your design where did you get that power knob

[@CraftyDude]

Check the link in video description section👍🙂

[@JeverHuelse]

Nice build, beautiful outcome.

[@cho4d]

Vveeeeeery nice! You are rapidly becoming one of my favourite youtube makers! I apprieciate the nice editing work too!

[@CraftyDude]

Great, thank you🙂👍

[@rohmatbubut]

Awalnya saya kira dari besi ternyata dari kayu wah luar biasa pak

[@marciogalafasse116]

Ótimo trabalho, parabéns!!!

[@dionwalters7769]

Awesome build, best I've ever seen. Can I ask the difference between having the motor as direct drive as opposed to how you have it with a belt drive? Why the belt? Thank you in advance

[@CraftyDude]

This motor has very high rpm, with belt and pulleys I slow down rpm and get better torque. If you connect washing machine motor direct to socket it will spin in about 10000-15000rpm. and its danger speed for lathe.

[@dionwalters7769]

@@CraftyDude Thank you very much for your response. I really appreciate it.

[@Alex-Freischutz]

@@CraftyDude Your argument is valid for pure classic (motor + belt + pulleys) scheme. But with electronic rpm control do we still need pulleys and belt?

[@Dhaniukir]

Sederhana dan mudah dimengerti,..❤👍👍

[@ahmadbidmeshki]

I love that 👏🏻👏🏻👏🏻👏🏻🧡🧡🧡

[@Gus0046]

Increíble lo bien que te ha quedado amigo. Excelente trabajo. Te felicito 👍

[@CraftyDude]

Gracias amigo👍🙂

[@Habibulla.M]

Nice job

[@Juliaheigl]

Wow tolle Arbeit großen Respekt liebe Grüße von Manfred aus Deutschland

[@CraftyDude]

Thank you Manfred👍🙂

[@RJayFlaming]

Absolutely everything you did here was different than I would have done it, and that's what is awesome about it. Great video.

[@CraftyDude]

How you would done it? Thanks👍

[@edharding9363]

I built a wood lathe using a washing machine motor, mine does not look anywhere near as good! A couple of problems I have found since then, a washing machine motor is not really strong enough for bowels, I can stop mine easily with a gouge. and the threaded bar (allthread) is too soft, the bearings wear it out really quickly, I've changed mine 3 or 4 times already. but I haven't found an easy replacement. That said it does work really well i really like your solution for the sliding tail stock and the live centre on it , I'll be copying those ideas, thanks. Excellent work!

[@CraftyDude]

Did you use speed controller?

[@edharding9363]

yes, the lathe was originally powered by a bench grinder using different size wheels to change the speed, the washing machine motor and speed controller work much better. I also used the original large pulley from the washing machine for more torque. the motor I have wont turn backwards unless you swap the brushes, I was thinking of adding a dc power source to to the dc windings to do this.

[@Darkhorseman72]

Would love to see a dimensional diagram and plans for this, one of the cleanest looking DIY shop lathes on this site.

[@CraftyDude]

My plan was, use materials which I have in place🙂 so all parts sizing was in making process

[@НиколайКуликов-ч5з]

@@CraftyDude 7ш

[@timc1103]

I'd like to see more of that process and a lot fewer holes being drilled and screws being screwed.@@CraftyDude

[@MARCOSARMESQUITA]

ESPETACULAR !! 👍👍👍🏅🏅🏅🇧🇷🇧🇷🇧🇷

[@yazdankhodabandehloo1429]

عالی درست کردی . آفرین .

[@mariosergiobarboza7095]

Parabéns pelo excelente projeto e belo acabamento.

[@rcadesystem527]

magnificent I subscribe I will build this beauty thank you

[@CraftyDude]

Great👍😎

[@rcadesystem527]

@@CraftyDude I'll be pretty busy with the other vidéos I have a lot of work,😂😂 I have to find the budgets

[@alainbaudry1989]

Bonjour un tour à bois super!!! c'est quoi le moteur pour l'entrainement?? encore super tuto!! Cdlt

[@CraftyDude]

C'est le moteur de la machine à laver Miele👍🙂

[@alainbaudry1989]

@@CraftyDude Okkkk merci pour ta réponse!! Continue c'est super Cdlt

[@XPentium]

Шкивы из фанеры не перегреются на высоких оборотах?

[@CraftyDude]

нет проблем со шкивами

[@pavelzajac7569]

Great work, it's a work of art 🙂😉👌

[@CraftyDude]

Thx😉👍

[@wolfman75]

Wow!!!! Awesome Dude!!!!!! Thank You!!!!!👍😎😃🤘 Do you have plans for this? I would be very interested!!!! 🙏

[@CraftyDude]

I made this without plans, reusing just materials which I had in garage, as prices jumping up extremely in these days😐

[@luigicetraro859]

Bello veramente, oltre che funzionale, anche un tornio che impreziosisce il laboratorio. Una curiosità, il motore usato, è un motore di lavatrice o lo hai preso appositamente? In descrizione non c'è? Grazie.

[@CraftyDude]

Grazie, è il motore della lavatrice Miele😉

[@thewolf3530]

I'm curious my friend how often you going to use that one just asking .

[@CraftyDude]

I didnt have plan to make 100 bowls or something like that, but I using this machine all the time, usualy for making handles or other small stuff, now I thinking to make disk sander attachment, so it will be even more useful, for sanding and lathe job

[@nanad103]

Which wood you are using ? It is just like butter , do smooth

[@CraftyDude]

Birch plywood

[@SASAN.H]

👌👌👌👌👌👌👌👌👌very good

[@user-oh2ig7zz5k]

Would an old craftsman tablesaw motor work?

[@CraftyDude]

I cant say if it work or not, table saw motor supposed to have high rpm and this controller which I used in video didnt match with your motor

[@OscarRodriguez-mj7vk]

111 / 5.000 Resultados de traducción What a piece and work of craftsmanship and engineering. In addition to being practical, it is really beautiful. Congratulations.

[@CraftyDude]

Thank you👍👍

[@gilsonmarcenaria1855]

Parabéns meu amigo, belo vídeo, e perto da nossa realidade, onde nós temos a possibilidade de possuir um belo torno,🙏🏻🙏🏻🙏🏻👍👍👇

[@tjacksonwoodworker3726]

Very well done..

[@CraftyDude]

🪵🪚👍🙂

[@Albertodc]

Veré good work

[@CraftyDude]

Thank you👍🙂

[@eurokuster8374]

Excelente, ótimo torno.

[@youtukang]

Yess friend 👍👍😊

[@arturboer]

This motor is silent and powerful and with a speed grader! Could you tell me what engine and parts you used? This is beautiful work! Congrats! Thank you for contributing with great taste and knowledge to the KZbin community!

[@CraftyDude]

Its Miele washing machine motor, link to speed controller Is in video description section. Thank you👍🙂

[@goldas2]

pomysl i wykonanie super

[@jerrypatrick1047]

Absofrigginly awesome build, brother...best lathe I've seen on here!! Congrats!!😉👍👍👊

[@markthompson6860]

well done

[@ЮрійКобзар-в4б]

everything ingenious is simple

[@kennethjeromewilliams1354]

I was wondering how can someone get the blueprints with the washing machine motor that's the best one I've seen made from DIY is there anyway I can get the blueprints to that I appreciate it I just want to make it last thank you. I'm looking forward to seeing more of your work I subscribed to your channel. You really take pride in your work that's cool

[@wendersonguimaraes3100]

Onde encontro para comprar

[@superspecialty5169]

What, no drill press or vice/clamps?

[@richardshaw3094]

Do you have any plans for this lathe?

[@mihaionu3849]

Super!!!!!!!!!

[@TanvirKabir0461]

Nice👌

Super

[@guilhermecsaez]

thats a nice job. btw, do you know whats the max rpm you got with this lathe system?

[@CraftyDude]

I never use it in max rpm, but it has to be about 3000rpm max

[@guilhermecsaez]

@@CraftyDude do you think motor that runs max to 1745rpm can give a nice lathe performance?

[@CraftyDude]

Washing mashine motor has about 10000rpm, but with pulleys I lower it 3 times, if you make twice bigger pulley on motor then on lathe shaft you will increase speed twice

[@guilhermecsaez]

@@CraftyDude can I sent you an email with a picture of my motor and then you can say me if I can manage to instal a speed regulator on it?

[@CraftyDude]

@@guilhermecsaez ok

[@robertmena9588]

Where did you get the variable speed module? Is this a 3 phase motor?

[@CraftyDude]

I bought it here s.click.aliexpress.com/e/_DBOWysH No its not 3 phase motor, its universal washing mashine motor, 220 AC

[@georgiatbilisi8851]

Which glue is used to glue black, iron and wood?

[@CraftyDude]

Steel epoxy

[@1137MOHAMEDKHOUELDI]

BRAVO

[@gencidango956]

Molto bello,se e possibile puo metere le dimensioni.

[@clovisvianna5087]

excelente torno ficou é possivel comprar o projeto

[@DJVoyagerXue]

Absolutely amazing, I just watched a bloke make a wood lathe out of WOOD! This earned a sub for the mad skills. ;)

[@CraftyDude]

Thank you👍🙂

[@eledirluiz5381]

muito bacana!!!!!!!!!!!!!!!