DIY Unique door latch | Bolts & Nut IDEAS

[@chriswilliams5268]

I love watching people create things. Humans are so talented

[@flackanator1]

Creative and interesting fabrication, This has potential for low security things like a gate or shed that would normally have no lock just a latch.

[@chronotis]

This is clearly for decoration only. I love it.

[@talgatturgunbayev6117]

Міне уста

[@krukabman]

A lot of the comments people talking about do this do that it’s not secure enough? It’s a simple gate latch!! A third grader could pick it in minuets. It’s a beet idea to lock a gate with slightly more security than just a latch. It’s a step up from the standard Amish latch. Good video I enjoyed it!

[@mpGrafik]

Super pomysł i wykonanie, ale ... obyś zawsze pamiętał szyfr! Miałem zamek szyfrowy do wejścia do mieszkania. Kiedyś wróciłem po zakrapianej imprezie i ... nie pamiętałem szyfru. Dopiero jak się wyspałem siedząc pod drzwiami, rano szyfr mi się przypomniał 🤣

[@sowa6639]

Pół minuty ---------------------------------- to wieczność ! żeby taki zamek otworzyć 🤣🤣🤣🤣 Ten zamek - jedynie nadaje się do ustępu < jakby ktoś sobie nie poradził ? to by się zes..... w spodnie

[@مفترقالطرق-ظ3ز]

😂😂😂😂😂

[@schoolofmediocrity2801]

Everyone in the comments is talking about how lame this lock is, but I tell you, this man is a genius! Not because he made a pointless lock, but because he got 4.3 million views of him creating a pointless lock. Well played sir.

[@user-http55588]

Totally agree, what a quality lock, only thing I would change is the screws he used to fit the lock, I'd use rounded bolts, my shed got robbed I had a really good lock on it they just unscrewed the hinges 🙄

[@СергейПташкин-ы6ы]

@@user-http55588 с таким замком ваш сарай откроют ещё быстрее. Это плохой замок.

[@LeaderofStupid]

I mean, yes and no. The lock does function. If only at a basic level. Likely not used to secure anything physically but as a proxy.

[@דורוןפינקל-גימייל]

May be it is good against children... the lock can be opened by revolbing every ring one after the other, The screws are exposed to be opened without the code.

[@holmes1956O]

Yup very true. However he definitely has too much time on his hands

[@dimasyard]

Чтобы открыть такой засов, достаточно открутить четыре самореза)))

[@ВладимирКолесников-ц8в]

Вместо саморезов могут использоваться болты. Снаружи заварены и зачищены, а гайка изнутри. Да и саморезы можно просто сваркой капнуть и зачистить и не открутишь ничего.

[@Vladimir62K]

@Димас Я, все гораздо проще. Крутишь первую гайку, находишь отверстие, двигаешь шпингалет. Затем крутишь вторую, продвигаешь шпингалет дальше Третью - тем же способом. Открыть такой замок - минутное дело. И без каких-либо инструментов.

[@ДенисП-л6ц]

@@Vladimir62K даже шпингалет двигать не надо - зона для гаек имеет зазоры, гайки там не плотно сидят, с боку если смотреть, то пазы в них будет видно. Ему надо было штыри в шпингалете делать с обратной стороны, чтоб они были в дверь направлены, а не к открывающему. 😏

[@АлексейЛабзин-ц2н]

@@Vladimir62K если совпадет только первая гайка, не откроется. Внимательнее надо быть.

[@Vladimir62K]

@@АлексейЛабзин-ц2н хорошо, буду внимательнее. Если только первая гайка совпадет, то, конечно не откроется. Но через несколько секунд совпадут все.

[@mharjustinoespina890]

It's nice. It's fancy. Great job. But doesn't give security.

[@vestagarage]

В туалете классная вещь)

[@henriqueavila8545]

Muito fácil de abrir, se manter forçado o trinco você acha facilmente o sulco da primeira porca e assim com as outras duas abrindo em poucos segundo.

[@rdruziani]

Forçando e girando dá pra abrir em menos de 15 segundos... Deveriam haver sulcos obstruídos em cada número para ficando apenas os da senha desobstruídos, assim dificultava um pouco mais...

[@vladimirvladimirovich3528]

Шикарная идея! Осмелюсь предложить доработку - повернуть ригель с упорами на 180 градусов, чтобы не было видно упоров и ручку ригеля на сквозь и заварить! Отличное исполнение!

[@magnifico11]

Чтобы его открыть понадобится не более 18 попыток. Видно или нет упоры, мало смысла столько возиться с созданием замка, который можно открыть за 36 секунд просто используя логику

[@magnifico11]

Фальшканавки на всех цифрах были бы полезнее

[@ГеоргийКрашенинников-х9в]

@@magnifico11 не усложняйте :). Отвёрткой выкрутите шурупы из доски, или отсверлите головки шурупов.

[@magnifico11]

@@ГеоргийКрашенинников-х9в так тянуть за ручку и крутить болты поочередно гораздо быстрее и выйдет)

[@karinanur7844]

Я тоже заметила этот дефект и уже давно , достаточно прижать ручку к болту а болт вращать и все упор сам найдет отверстие 5 сек. нужно на вскрытие!!!!! этот замок с самым низким уровнем защиты и интересно что в интернете много вшивых блогеров с таким замком те хвастаются что создали нечто , а на деле ничто , идиоты!!!!!! @@magnifico11

[@masterQ20]

Really great idea. I was amazed at how you did it !!

[@decarv73]

Very impressed with this. I'm going to make myself one

[@diybestideas]

Thank you! Cheers!

[@rkcre8tive907]

Best concept I've seen thumbs up! The only down side is the screw area needs more thought as its too easy to screw the lock off and avoid your combination. However great work and finishing.

[@dave5176]

Use torx security screws. This isn't exactly for a high crime area.

[@jsmcguireIII]

ROUND HEADED BOLTS THROUGH THE GATE FRAME

[@sandortolnai4562]

@@jsmcguireIII akkus fúróval lefúrom...pár perc...

[@DonTruman]

Very cool, low-security locking gate latch. Which in and of itself is *not* useless. E.g. keeping young children out of an area. Or preventing adults in a hurry from getting through (it would take some time to figure out what this unusual looking thing is and what they have to do to open it). Or of course just a novelty. For more security eliminate the numbers and make some other ID for the position. By putting numbers on it, it *looks* like a combo lock, which is a clue of what to do to open it. Without the numbers it would just look like three big nuts and therefore take longer to figure out.

[@drewdavis7244]

when i was a kid this would not of kept me out.

[@diytoptricks]

This video is fantastic! The DIY door latch idea using bolts and nuts is both creative and practical. Thank you for sharing such innovative content. Keep up the great work!

[@josephstratti52]

I think without an inner circumferential groove as well as the groove through the nut his bolt can only be locked in the open position!

[@Michael-lv1qv]

Wow genius!!

[@arpitsinghal4078]

I thought the same thing, don't know why I didn't show it 🙄🙄

[@tallerherreriasoldaduraary9062]

I don't understand 😐

[@copkhan007]

Excellent idea. Great build. 4 nuts should be minimum to increase the combination. 👍👍

[@leland4831]

Super cool but since the square tube is bigger than the bar stock, I'd hide the pins at 12 o'clock as it sits on the door so you can't see how it works. If someone gets to see it unlocked with the pins visible it makes it way easy to figure out if you pull or push the bolt and turn the nuts one at a time in order either way you have the combo. Still a neat project.

[@reddyvardhan8804]

Great job, but It is very easy to unlock the door by pulling the lock rod backwards and rotating each nut until it matches the slots, after each slot is matched the lock rod can be pulled and unlocked

[@freddaniali]

It will keep the honest people honest.

[@paulmeynell8866]

Just stagger the pins

[@jeanpaulbuligan4803]

Very useful, it can be opened with a screwdriver!

[@constructionwithskills488]

Nice

[@jagadeeshbabubanka]

🤣🤣

[@glowchild1696]

Or a hammer lol

[@fagbuleoladapo6082]

😂😂😂

[@PrinzJeddTaja]

😂

[@eesamolazahi4898]

The only bad thing about it is that its day does not change

[@HowtoMakeThings]

A combination that can never be changed

[@d00der41]

Just sand off the numbers and put on new ones

[@HowtoMakeThings]

@@d00der41 you’d have to take it apart to stamp new numbers as he did it. Prior to this sand each side of each nut by at least 0.5mm. Hardly convenient or a two minute job.

[@danielprates2208]

Yeah but... all it takes is to press the bolt against the first nut and twist the nut until you find the groove. The bolt will slide right in. Then repeat for the next two nuts and that's it.

[@adamv242]

All it takes is to remove 4 Phillips screws. Could've at least used tamper-proof Torx.

[@danielprates2208]

@@adamv242 yeah but even that requires a screwdriver. Feeling the groove is tool-free!

[@cognitivedissident9825]

Depends on the tolerance. Wheel 2 might bind first or wheel 3, so still easy. If the tolerance is high this makes things harder. I'd still decode this in seconds with a shim tool either way.

[@buddchan]

Me and my hammer will have it open in a blink no worries chap

[@edipyuksel]

Excellent work, but it will take maximum 24 trials (average 12 trials) to decode; as opposed to max 8x8x8=512 trials (average 256).

[@kirikcark9120]

Exactly my point, you can move the bolt as you turn each nut to the right position :)

[@moonie2465]

Pretty cool almost to nice to use love your style no gloves we r a dying breed

[@Леопольд78]

На случай если забыл код,всегда держи в кармане фигурную отвертку. Хотя русские её берут даже на курорт,мало ли,вдруг в номерах гостиниц светильники прикручены или мыльницы красивые.

[@JohnBroBro]

Ну можно на болты посадить.Все равно фигня,легко подобрать...

[@GurumukhSingh-sx5ph]

Best and cheap long life door lock

[@franciscocatalancotta9065]

Congratulations!!! A great work. El único "problema" que le veo es que si alguien se lo encuentra abierto puede deducir la combinación con mucha facilidad,

[@aura4641]

The round shaft must be longer. Practically its avoided screwing near wood edges(compromising door-lock strength) so that wood doesn't cracks up on regular use.

[@user-sf9rn9yx5f]

So adorable

[@Ivan-qq6dj]

I don’t know what to say but you are a genius

[@knowitallhen]

công việc này là tuyệt vời , nhưng tôi nghĩ đây là loại ổ khóa dễ phá mật mã nhất 😅

[@roqueteroranger]

Great job bro 😮😮😮😮🙏blessings keep going

[@ChakaHamilton]

Great video but the rock music in the background was a bit distracting. Some of us love just hearing machine noises without the extra unnecessary music.

[@Michael-lv1qv]

And some of us like hearing rock noises. which will he accommodate, tune in next week. 🤦

[@andrzejporeda7281]

Super jest pomysł z tymi śrubkami żeby zrobić zasuwę na szyfr Pozdrawiam serdecznie. 👍👍👍👍👍👍👍

[@358trucking]

Wow! A solution to securing my garage! I’ll sleep better knowing my Ferrari is safe! Great video! 😀👍

[@djedwintamarez]

Excellent invention, I congratulate you, but it is designed for children because if an adult does not know the combination, he will take a screwdriver and remove the screws, unless he puts screws with nuts and the nuts are on the other side of the wood, this is advice in case that project is to protect you from adults. By the way, I subscribed to your channel and left you a like.

[@diybestideas]

Thanks for the like and for subscribing. Always good to get feedback.

[@aliyaali577]

😂😂 bagus,, Cukup 2menit saya bisa membukanya...😊😊 pastinya

[@benjaminsamuelson4901]

Very clever idea. Lock would be a breeze to pick though

[@alexhamilton1907]

Замечательный замок, можно конечно просто открутить шурупы и посмеяться над его автором, да и подбирается код очень просто, а так замечательный 😂

[@ИванКалита-в8е]

​@@karinanur7844Это не болт, а гайка. И замок этот на клозет ради прикола. Умник нашёлся 😂

[@franciscocastellanos9157]

Great idea, the only bad idea is not protecting his hands from this flying metal debri. I will not get surprised if he gets blind by not protecting his eyes neither...Great video

[@LiquidSnake1988]

Nice great 👍 Good use for garden door or backyard. So they won't be able to open it easily.

[@troybingham6426]

Very cool. Brilliant work.

[@tym2relax748]

im so enjoying to watch your creation amazing.

[@ಓಟ್ಗಾನ್ಡೊಲ್ಗೊರ್ಸುರೆನ್]

Wow best lock 👍👍👍👍

[@davidsnyder2000]

Really clever idea. I’ve never seen this done before. Super cool and nice workmanship 🙂👍

[@raypage9035]

Being a now retired machinist of over 40 years I had shivers run up and down my spine (the type of shivers you get when someone scrapes their fingernails over a blackboard) watching all the bad practices during the making of this lock

[@nabilteknik4974]

Thanks Vidio shering 👍🏻 full support to you 👍🏻

[@nicolino.cichetti]

Ohhhhhh fantastic 👏 👏 👏 👏 👏 👏

[@dianasmith8923]

I'm going to do this and by that I mean I'm going to show my dad and ask him to make it for me

[@Flashdogger]

Hey I didn't see how you cut the slot or what you did to make the rod with the three small rods cut off slide threw the drilled out nuts? Can you tell me were in the video and explain it to me. I think this would make make a fun lock on certain things.

[@horvathgergely6263]

In this version you can find out the code within a minute. If you start to roll the fist nut, and you found the right number, you can push the bar forward a bit. You need to do the same with the remaining two nuts, and you have the combination.

[@dave5176]

Keeps the honest people out.

[@HypocrisyLaidBare]

It only has ⅔ of a regular 3 digit lock but I don't think it's genuinely intended for security. If anything, its for nothing more than stopping infants opening a back gate, least for a short while 😅😅

[@robertbutler8004]

@horvathgergely6263 come on man this video was done for entertainment only and he would know quite well that it is not secure.

[@michaelheurkens4538]

Cool and fun, but not very secure. Just remove the screws for access.

[@lucescasares6706]

5

[@noobinho8882]

Yeah, but what if you build a tough one and weld the whole thing in a metal door.

[@jvmiller1995]

@L M still all you have to do is try and open it until one nut drops in then the next and then it is open. Not real secure. But it is a fun project.

[@pdogg9240]

Not for the average homeowner

[@JR-xc1yf]

It's easy to crack even without removing screws, just tension it and turn first nut until it goes in 1 step, and repeat. You can even guess password by trying 1 nut at a time, so you only have 24 tries max

[@larrysloan9296]

Love the new wheel

[@YonsFi]

Luar biasa genius 👍👍👍

[@YB-eg3rj]

Cool lock, easy to open.

[@staysafe2122]

So great! Now we all know the code 132 😆

[@lewistaylor1965]

Best punch those screw heads or counter drill out the 'X' too...Beautiful chunky lock

[@юрийдуплинский-й7ь]

Лайк за наивность. Что мешает открутить несколько шурупов и замка нет😂👍

[@sashakl2125]

Да его и открыть можно за 10 секунд. Для этого достаточно вслепую вращать гайки по очереди и по одному шагу продвигать засов.

[@СергейС-с8х]

@@sashakl2125 будете все 900 вариантов прокручивать? Не устанете

[@sashakl2125]

@@СергейС-с8х крутишь первую гайку и одновременно давишь шпингалет вправо. Один оборот, "клац!" и шпингалет проскочил правее - первая гайка преодолена. Крутишь вторую гайку и снова постоянно давишь шпингалет вправо... И т.д. В том то и просчет конструкции,что её можно преодолевать пошагово, а не набрав сразу нужную комбинацию, чтобы открыть.

[@egvander65]

Fun project, good idea.

[@MRMTAMILGK]

Wow Fantastic🤘😝🤘

[@MrRichard57000]

Very cool.....666 combination??Ad another nut for 6666 combinations...Nice job

[@youcefgheddari8400]

Wow Very gooooood

[@jogandocomtuliosnake7318]

parabéns pelo trabalho super criativo e bem funcional, mas os parafusos que prendem a tranca na parede são fáceis de desparafusar. Deveria ser brindado a fixação na parede de madeira

[@АлександрЛапин-я4д]

Мой друг,какие шурупы?Если надо сломать есть кувалда или монтировка.5 секунд и этот креатив отлетит вместе с куском двери)))

[@raheemeng3736]

The thief need only screwdriver. Nice work and idea. You have to hide the screw.

[@jorgebatista833]

A idéia é muito boa! Porém uma falha que pode ser resolvida. Mesmo trancado, poderia remover a tranca retirando os parafusos.

[@LucasAmorim-sx7oq]

A palavra que eu vou usar é incrível.

[@guysolis5843]

Cool idea and great craftmanship..

[@ethanv7330]

If you made nuts rotate around an inner ring that rotates with them when the lock is locked. But when you pull the lock back. Pin the inside rings with the bolt. Allowing only the outside rings to move when it's unlocked. You'd have the same lock, but you can change the combinations while it's unlocked. Like a suitcase lock. Also put the screws under the bolt, "while locked" so you can reach them when it's unlocked. And sink them in, with the bolt as flush as you can get it, so there is no access when it is locked.

[@MrNicefash]

Wow you must be a genius

[@alvenisbeltran9154]

Great job 💯

[@appiahsolomon5419]

Fantastic l need one to buy tnx

[@Haxsaw67]

very cool, but would be very easy to pick the combo.

[@mrtrenddiy]

your idea is meaningful

[@Котвштанах]

Идея с замком супер. 👍но шурупы все портят. Только сквозное крепление. Ну я думаю это просто так для демонстрации замка шурупы. Иначе нет логики от такого замка. А вообще замок норм. 👍👍👍👍

[@vieclamvllog]

Thank you for sharing useful video.

[@vichetdragoncars3186]

The best creative ideas

[@drewdavis7244]

So you just apply pressure towards the nuts, spin the first number until you feel the notch, spin the 2nd until you feel the notch, spin the last one until it opens, same as a cheep bike lock, congrats this is easier then a master lock to open.

[@compartilhandoosaberfranci5662]

Congratulations on the secret lock. But what about the visible screws?

[@davidlerner23]

Use carriage bolts instead of screws for security

[@daleeladakus1966]

HaHa! I was thinking the very same thing!!! Still,.... a very novel idea!!!! 😀

[@pierre5325]

a grand creation

[@COTUONGHAY.]

Wonderfull ❤

[@exploradortardio3258]

Legal mais esse sistema é fácil abrir mesmo sem a senha pois basta ir movendo uma porca por vez e ir encaixando os pinos

[@alihms]

Back a few years ago, I lived where there would be one possible use for this. We had community garbage bins inside a caged enclosure. The enclosure was needed because of wild monkeys would regularly raid the bins and made a mess out of them. The monkeys were smart enough to open a normal latch. We tried a regular padlock with the key tied besides the lock. It was too cumbersome; especially for the garbage disposal team because they need to remove their gloves. The nuts can be made much bigger so that gloved fingers can easily turn them. And the number of nuts reduced to 2 (instead of 3) to make opening faster for humans yet still impossible for monkeys.

[@rustynail9793]

Everyone talking about just removing the screws when it would only take a second to crack the code. Just lign up the nuts just at a time

[@magvat]

I think if the pins are spaced accuratly you would not feel the uningagement of a individual nut

[@rustynail9793]

@@magvat Al you have to do is move the fist nut till the pin go in then move the next one till the pin goes into it then the final nut. Shouldn't take more then a couple minutes to figure out

[@magvat]

@@rustynail9793 thats what I tought too but there is 3 pins and bolts are bored to fit them before they enter the slott

[@magvat]

The screws I would just bore the slots for driver away

[@bokimijat6163]

Very cleverly designed, i like this video👌💪

[@foodvillagebylipu]

Amazing talent.

[@shawn_143]

I think the whole point of this build is views and it's doing a good job of it

[@pepebiondi5962]

Buenísima idea!

[@dhimaanmotors]

Nice one

[@agribeauty96]

I need this.

[@slavisavukosavljevic3131]

A burglar doesn't need a code, he just needs a screwdriver.

[@henrytaylor3049]

Nice you should drill a hole for a pad lock too.

[@notdumb2903]

a cool castle from honest people.. who won't open it anyway))) and the one who wants to open it, he is not a hindrance to him, since he is easily opened by unfixed twisting of "secrets"

[@ibleejtxivzoo7856]

All you need is a Phillip to get in😂

[@LiquidSnake1988]

Hopefully you'll make one where you can use key to lock it from the inside and outside. Sooner

[@SpiritOfChina]

Эта хрень имеет всего 216 вариантов. да и обычным способом на ощупь откроется за 10 секунд. а прикрутить на саморезы - это вообще гениальнейшее решение ;)

[@paulnewman2000]

You should use countersunk bolts with recessed nuts and locking nuts on the other side of the door and frame, instead of screws.

[@rizzzzod]

DYI my 🫏. Yeah, let me go downstairs and get my number punch. Good job though. You’re skilled.

[@majidbapukureshi8871]

Super excellent

[@kellerzell]

Не показал момент как сделал фаску внутри гайки. Иначе как шпинголет в закрытом состоянии, а гайки крутятся.