Ceramic coating your new car: a SIMPLE system from start to finish

If you're interested in applying a ceramic coating on a new vehicle, but you're a bit overwhelmed by all of the information out there, this is the video for you. Anybody can use this method, whether you're an experienced detailer or an enthusiast in your driveway. This process is a step-by-step method for properly preparing paint and expertly applying our 8-year Ceramic Coating.
Products used:
ALL CLEAN: bit.ly/AllCleanDIYDetail
DECON TOWEL: bit.ly/FineGradeClayTowel
FLUFFY WASH MITT: bit.ly/FluffyWashMitt
INCREDIBLE SUDS: bit.ly/IncredibleSuds
IRON REMOVER: bit.ly/3GfY4iM
PANEL PREP: bit.ly/DIYPanelPrep
FOAM COATING APPLICATOR: bit.ly/CoatingApplicator
COATING LEVELING TOWEL: bit.ly/CoatingLevelingTowel
8 YEAR CERAMIC COATING: bit.ly/8YearCERAMIC
*NOTE: we don't polish the paint in this video. If you're interested in how to properly polish paint before ceramic coating, we have an entire playlist on here dedicated to polishing paint: • POLISHING WITH ROTARY ...
Podcast:bit.ly/DIYDetailPodcast
#autodetailing #diydetail #yvanlacroix

[@Redrunnerdetail1323]

Just clayed , polished and coated my car yesterday with the 8 year! Amazing

[@diydetailofficial]

Thank you, let us know how the first wash goes.

[@terriblet9810]

You sold me on the rotary! Just bought a Harbor Freight Hercules cordless Rotary Polisher. It was FREE with the purchase of two 5AH batteries and since I wanted the batteries.... It is $99 tool only. Used it today - it is really great, very smooth, not heavy and nicely balanced. I will be replacing the grease like Apex Detail always does - LOL!

[@diydetailofficial]

Enjoy!

[@gregdedrick2150]

I polished and coated wife’s blue print Highlander using 8+3 year stack. The metallic paint looks like it should have from factory. Amazing difference in look but slickness is crazy. Totally agree on the white paint. These coatings are very easy to apply as I'm a novice and managed to do both my truck and wife's SUV without issue.

[@diydetailofficial]

Thank you.

[@hamsbeach]

Did you use the same procedure as these guys?

[@gregdedrick2150]

@@hamsbeach I did. I used their yellow pads and gold standard polish. Didn't have the pad washer but used a bucket with grit guards filled with rinse less wash. Used their panel prep and coatings. Worked great.

[@robertizmirlian7933]

I appreciate what you guys do. Always striving to make detailing easier for the little guy. I've learned a lot from this channel.

[@diydetailofficial]

Glad to help

[@DMT267]

Agree 100%. Everyone needs to stop using the 2 bucket rip-off con. I've just recently started doing 2 foam wash on my wife's graphite coated new car. Works amazing. Cheers.

[@diydetailofficial]

Good stuff!

[@Teleman01]

The key to putting a ceramic coating on is lighting. Obviously there are other things lol, but lighting is huge. I've only did it a couple times. The first time I did it outside because I don't have a bunch of lights in my garage. And I missed a bunch of stuff. You can think you have everything leveled down and wiped off, then the next thing you know you find five or six places you need to fix. It was so frustrating. Doing it in a garage with all of those lights above would be heaven lol. Excellent Video is always.

[@diydetailofficial]

Great point

[@daveorourke8447]

I love the content and the way you explain the process. Love your products as well.

[@diydetailofficial]

Thank you so much!!!

[@MikeCanuck]

Here they come The boys in the bright red sports shoes Waving their towels in the air We all know who they are And wow did they shine that car! 🎶

[@diydetailofficial]

Nice! La da da da

[@aldaley3537]

I ceramic coated my White 2002 Escalade recently. It was very challenging. The final product is incredible after a month. Apex BC 1 as the coating and BC 3 is the topper.

[@diydetailofficial]

Happy you like it.

[@aspen6276]

I loved this video guys. I love the dynamic between you and how you present this for a guy just getting started. It's like listening to my own inner dialog during the reality of any project. Thanks for showing us as DIY'er instead of skipping past the basics.

[@diydetailofficial]

Glad you enjoyed it! Thanks so much for the kind words

[@en1254]

Always learning something new when watching your videos...no matter how much you may think you may know..

[@diydetailofficial]

Glad to hear that!

[@kevind_53]

I agree the 8 years is one of the most userfriendly coating i've ever used!

[@diydetailofficial]

Excellent!

[@ThisOldDetailingDude]

Can’t wait to get started

[@diydetailofficial]

Soon

[@stevenv9224]

Great video guys 👍🏼👍🏼👍🏼👍🏼 keep it coming

[@diydetailofficial]

More to come!

[@LaoTzudonym]

Thank you guys for this video. I followed the instruction as close as possible (I don’t own a foam gun so had to do that part by hand) and the results are incredible. I did a grapheme coat and not only is my car showroom glossy, it stays spotless through rain/mud. My car means a lot to me, its a purchase that represents me getting my life together and I take a lot of pride in keeping it well maintained. I really appreciate you guys making this process not only digestible but also kind of fun.

[@diydetailofficial]

Thank you.

[@mauricetremblay1324]

Always listen to the MASTER, Mr. Lacroix. I cannot think of a more experienced and no nonsense car detail guy around. Cheers!

[@diydetailofficial]

Thank you

[@randy74989]

Yep, had mine ceramic coated three days after I brought her home. It's amazing 8 mos. later and I have her washed once per month with ceramic shampoo by the same detailer. And I detail her with Chemical Guys ceramic detailer when necessary between washes and CGs ceramic wheel detailer for the rims.

[@diydetailofficial]

Well done!

[@victoryensured7137]

A great wideo, love the DIY aprroach! Stay strong! Eat sleep detail repeat 🦾

[@diydetailofficial]

Yes! Thank you!

[@BorndetailersTv]

Great video 🎉🎉

[@diydetailofficial]

Thank you

[@Cquirkii]

You guys are awesome! Thank you !!

[@diydetailofficial]

Thank you.

[@maryhoffman2547]

This will be a good one.

[@diydetailofficial]

Thank you

[@M.D.MobileDetailing]

To avoid the high spots and drips/running you on the edges I have a solution. What I do is start with the circular spreading in the middle when you've just loaded up the applicator. That way you're not doing the edges when the applicator is its most saturated. Otherwise you tend to get that running. That way you can just keep working in circles right up to your edges spreading outward!

[@diydetailofficial]

Excellent

[@diydetailofficial]

Excellent .

[@m.3651]

Then you applied way to much coating on the applicator. Work in small areas, 10 drops with a pipet.

[@notsodelusional]

Unrelated question: do you have to worry about mold buildup underneath the flooring? Curious about the maintenance. Ty!

[@diydetailofficial]

Yes. Floor needs to be taken up and cleaned underneath.

[@1280spoon]

I enjoy watching your videos

[@diydetailofficial]

Thank you.

[@deedeepenn9736]

Great video. Question - For the ceramic liquid coating, does it matter if you get some on the glass or plastic? Thank you.

[@diydetailofficial]

You want it on both

[@andremdetails]

Yup white is the hardest to work with. Did a white Bentley last week, so hard ceramic coat had to feel each panel.

[@diydetailofficial]

Yes it’s not easy.

[@Steph-iw3hr]

Nice video guys . I have always heard about cross H pattern to apply ceramic coating ? Nick is doing circles ? Thanks for your feed back Stephane

[@diydetailofficial]

We teach circular motions, it’s less likely to leave high spots (less starting and stopping) and easier on your shoulder

[@peterdoherty7282]

Yvan, Trooper was a Canadian band… Nick didn’t even have a chance. 😅 next hit him up with some Men Without Hats trivia next.

[@diydetailofficial]

While we do the Safety dance on occasion, I think Klaatu is more appropriate for Nick.

[@GrandHuevotes]

I think the iron remover test should’ve been done after the wash.. otherwise you’re just testing normal metallic brake dust that would’ve washed off during the normal wash. Just a thought

[@diydetailofficial]

Yes, but not all would have been removed from a wash

[@TheMuseCoffeeco]

I just did the 8year ceramic coating and it’s easy and amazing. Now I need to wash it. Rinseless wash with or without the ceramic gloss? Is ceramic gloss a product to use on ceramic coatings and or is there something better after the rinseless?

[@diydetailofficial]

DIY Detail Ceramic Gloss is a great choice.

[@brentnicol1586]

I do enjoy y'all videos, and you guys do put out some very positive information for detailing, but the decontamination towl is essentially a clay bar in a towl form, the only difference is the clay holds onto all the deposits from the paint. Juat call it a clay bar towl haha

[@diydetailofficial]

They are very different. The Perforated Synthetic Decontamination Towel is a polymeric material that contains no abrasives. Clay bars use abrasives to do the job.

[@79blustone]

Interior ceramic- is that water based? Also, if you have a new car, what are your thoughts about just hand polishing after the necessary decon just to give a micron scale surface to allow the ceramic coating just to grab onto to give you slightly more longevity?

[@diydetailofficial]

It’s solvent based. You can hand polish.

[@nickwarren5800]

So say i wanted to apply a second layer or add the 3 year on top of this how long will i wait between the two layers? Also do you guys plan on adding more products to Amazon?

[@diydetailofficial]

If wanting to stack the 3 year on top of our 5 or 8 year coating it has to be done between 2 and 8 hours after the first application. To add a second layer of the same product, there’s really no need, but give it at least 24 hours. More products coming to Amazon soon.

[@seabreezeof]

A question, if you polished before applying ceramic would there have been a higher gloss ? Good luck in your new location, waiting to see what it looks like when your finished !!

[@diydetailofficial]

Yes you will get more gloss if you polish with The Gold Standard Polishing System first.

[@garbox101]

This video was filled with some beautiful gems of knowledge. It is much appreciated gents.

[@diydetailofficial]

Glad you enjoyed it!

[@christopherstommes7353]

Love it guys! Do you coat the wheels and tires?

[@diydetailofficial]

Wheels yes, tires we use DIY Detail Tire Dressing

[@user-yj6xt7sy9o]

I have one question. Do new cars come with some type of coating on that will need to be stripped prior to adding a coating? It's a metallic silver Honda civic.

[@diydetailofficial]

Not from the factory, but occasionally dealers will use sealants, best to act as if it has something in your prep.

[@kendelc1973]

Great video as usual, learning alot from you guys. Some guys say you must polish vehicle before applying coating, but you guys show that its not true. It can be apply without polishing. Curious, what would be that average cost for this service without polishing?

[@diydetailofficial]

$500 and up

[@Samsin361]

Odd question, would you do any paint corrections in the future after ceramic coating the car? If it's needed, is it a difference process with the ceramic coat?

[@diydetailofficial]

You will need to add a new coating

[@kennethluke446]

Hi, thanks for these very informative videos. One question, do you clean and coat the paint protection film like the other surfaces or treat it differently. Oops, one more, ideally would yu apply the film after the ceramic?

[@diydetailofficial]

Yes, no difference, I would suggest coating after PPF.

[@brandonnguyen1486]

Hey what if you have to remove water spots? Is this it- wash car, dry it, re soak and do clay process, then use water spot remover, then polish paint, then apply ceramic?

[@diydetailofficial]

Correct

[@spelterworkstiger]

What make of ceramuc coating are you using, im in UK and never heard of an 8 year ceramic coating. Very interested to find make guys

[@diydetailofficial]

DIY Detail 8 year Https://diydetail.com/pages/distributors

[@user-pz6dw3ot8j]

In the video above, you did NOT include a spot remover stage in preparing the car for the ceramic coating. Yet I watched an other DIY Detail video yesterday about a simple process of ceramic coating a new Suburu which DID include a spot remover stage to clean out the pores of the paintwork. Is the spot remover stage an optional one for ceramic coating a new car with say less than 100 miles on it? Could you please clarify? Thanks again for all these great videos!

[@diydetailofficial]

It’s best to do it, in the case of the Subaru , we know the car wash leaves a film.

[@user-pz6dw3ot8j]

Many thanks, Nick. I will add it to the process for ceramic coating my new Lexus this Spring. I would need the DIY Spot Remover anyway for the annual maintenance next year anyway.@@diydetailofficial

[@diydetailofficial]

Thank you.

[@antoniou5]

Am sure its been asked before but what's the cure time for the 3 year coating? How many days before contact with water?

[@diydetailofficial]

You can drive it after 1 hour of curing. Wait a week to wash, then feel free to use Ceramic Gloss😊

[@philliplagreco6453]

After you wash the vehicle “truck,car,etc.” can you polish first and then go in with the ceramic or graphene ? It’s a new truck around 500 miles drivenup from Virginia

[@diydetailofficial]

Yes, polishing is best.

[@eric6913]

Great video! I appreciate your content. Are there any issues or concerns with vinyl decals during any of these detailing steps?

[@diydetailofficial]

Not if they are gloss. If they matte, then avoid polishing.

[@eric6913]

@diydetailofficial ok, so the chemicals and coatings should be fine?

[@diydetailofficial]

Yes

[@larryleerssen2562]

Where do you get your buckets, they are not on your website? Love the videoes very helpful

[@aaronolsen8787]

They get them from their local restaurant supply store.

[@diydetailofficial]

Thank you, they are from a local restaurant supply

[@alanhindman6139]

What if this new vehicle came with a 1 year dealer installed coating. Would you have to polish before installing the DIY coating?

[@diydetailofficial]

Yes, polishing will remove it.

[@josephdefreitas56]

Excellent vid. So with ALL coatings should you generally use a circular motion as opposed to a crisscross pattern?

[@diydetailofficial]

The geometric shape you use makes no difference to the coating. The goal is to evenly distribute it on the paint. We prefer circular motions because it reduces the chance of high spots.

[@josephdefreitas56]

Thanks for the reply. I really thought that there was some other reason for the crisscross pattern other than proper coverage, but I can see your excellent point regarding the reduction of high spots with the circular motion.@@diydetailofficial

[@diydetailofficial]

Thank you for the question

[@JohnSnow1232]

When applying a nano rain repellent for windows, is it necessary to spray 20 times per square meter and also wait and have it cure for 24 hours after? And would you agree that this would be an excellent upsell for client?

[@diydetailofficial]

Every product is different

[@JohnSnow1232]

@@diydetailofficial I'll follow the instructions on the bottle. Appreciate it!

[@janlorida1240]

Great video! our new car will be deliver in a week and i want to do this on our car. but our garage is not built for washing car. my question is can i use rinseless wash? if yes what products do i need to buy. and what products i need for maintenance. thank you

[@diydetailofficial]

Yes, DIY Detail Rinse Less Wash is ideal.

[@aaronolsen8787]

How do your coatings compare to strict glass coatings like GTechniq G1 on windshields as far as beading at lower speeds and abrasion resistance from wiper blades is concerned? Is there added bonding agents in glass specific coatings?

[@diydetailofficial]

There’s very little difference if any.

[@jonathanjoachim8891]

@@diydetailofficialis there any special steps to do to ceramic coat windows? Like decon steps? For example polishing the glass or anything?

[@diydetailofficial]

Ideally clay and polish.

[@3100fps]

Have a new car 2 months old. Applied spray ceramic coatings like McGuires and Turtle wax along with a Iron wheel cleaner during the first 3 weeks of owner ship. There is not one scratch or swirl mark on the paint. Lots of orange peal but show me a new car that is not full of orange peal. Rather have an extra layer of clear coat than a paint corrected car. I live in Florida so sun use of products that don't like sun are not worth it. My question is I am happy with my car the way it is. Use of polishes and buffing in the past have always resulted in disaster. I keep my cars a long time. So whats the best way to just keep my car the way it is. I use a foamer and two buck method and spray rinse off products. Never heard of decontamination a new car until I started watching detail videos although it makes a lot of sense. I would image less than 5% of new car owners have their paint decontaminated. So whats the best way to keep the car just the way it is.

[@diydetailofficial]

Congratulations, keeping it clean is a great start. This may help kzbin.info/www/bejne/mJWsf31jaLKWZrcsi=ZtnaUke4QnyXMjn0

[@oliver.79]

Thank you! Do you do ceramic coating on the inside as well (infotainment screen, piano black areas, etc)? How many bottle(s) do I need on a mid size SUV (Honda Pilot)? Thank you!

[@aaronolsen8787]

They have a 16oz bottle with a spray trigger that's called interior ceramic. It's safe on all interior surfaces including infotainment screens. Just don't use it on the interior windows as it can fog up. It's an awesome product and one bottle will coat multiple vehicle interiors.

[@diydetailofficial]

Only one bottle, for interior surfaces we have our DIY Detail Interior Ceramic.

[@oliver.79]

Thank you so much!!

[@oliver.79]

@@diydetailofficialPlease, do a video with the DIY interior ceramic coating. That would be great! Thank you!!

[@diydetailofficial]

Our pleasure, when you’re done please post your results in our Facebook group bit.ly/DIYDetailFacebookGroup

[@DudeYourDad]

I have my dream car coming in next week (C8). Also have your ceramic kit. Should I trust dealership to clean car or should I ask them to leave it alone??

[@diydetailofficial]

Leave it alone

[@gtileo]

What washer tips do you normally use on your foam rinse? Standard wide 40 degree or is a 25 degree better for taking off any bugs or dirt? How about the end of contact wash rinse off?

[@diydetailofficial]

We generally use a 25 degree tip

[@Driverwanted45]

Hey mate, what is the brand of your scissor lift ? :) ty!

[@diydetailofficial]

We don’t have one.

[@jaimedpcaus1]

On average, what would be the cost on a new car for the wash, decon, and coat for 8 yrs?

[@diydetailofficial]

Most detailers should charge around 1500$

[@jaimedpcaus1]

@diydetailofficial That's a nice chunk of change, don't you agree? It makes want to continue to learn from your videos!

[@jaimedpcaus1]

By the way, is the ceramic coating applied to the entire car (window glass, trim, plastic)? In the video, I don't remember if it was applied to other parts other than the panels?

[@JLED2024]

I can't wait to do the G63 Black! It shouldn't take that long considering how fast you guys did this one!

[@diydetailofficial]

Thanks, please share your thoughts in our facebook group bit.ly/DIYDetailFacebookGroup

[@dominickmamone6196]

Is the Stash and Mullet coming back? 70's and 80's are coming back. good video

[@diydetailofficial]

No it’s thankfully gone for good

[@KingTheDetailer]

What polish can you use before adding the ceramic coating ?

[@diydetailofficial]

Gold Standard Polish: bit.ly/GoldStandardPolish

[@23dothedew]

If you finish your decon wash and dry the car and see some left over orange spots, how do you handle that? Iron remover on a microfiber or something else?

[@diydetailofficial]

You’re just going to want to re wet the panel with Rinseless Wash quickly (easy, just grab your sponge from bucket) and do same process on towel(one spray)/panel (one spray) and no pressure until the orange spots go away

[@23dothedew]

@@diydetailofficial thanks!

[@stephenlouden480]

Spyker use iron remover on wheels after you wash them to maximize iron removing power from the chemical. I coat two panels at a time then go bsck level them back to back then coat another two panels. I also two coats using less coating eacg application and them i don't worry about having leftover coating two light coats are better than 1 thick coat. Love your other coating its soo glossy

[@diydetailofficial]

Thanks for the tip!

[@rooboy99]

Hey lads, whats the best way to coat the windows ? If you roll it down slightly you can get the top edge. But then how do u get the rest of the glass without affecting the top section by rolling it back up? Thx how long would the coating last on windows with all that abrasion when they go up and down ?

[@diydetailofficial]

Roll down, do the top of the window, coat the rest of the car. When you’re finished coating the rest of the car, put the windows up, and finish by coating the rest of the window.

[@rooboy99]

​@@diydetailofficialthanks. What about durability on windows? What is a realistic period with the 3 5 and 8 year coatings on windows with all that abrasion when opening and closing? Would we only see a fraction of durability? Thx

[@diydetailofficial]

Durability is definitely a direct correlation with abrasion. It’s difficult to express a durability in this case.

[@1stfrompuertorico568]

Ready

[@diydetailofficial]

Thank you

[@tardeliesmagic]

I always wash the bottom half last never risking any dirt/grit to go anywhere else.

[@diydetailofficial]

Great, but with our Foam/ Rinse /Foam it’s not really a concern

[@sethwoodill1554]

If you have a ceramic coating already on do you want to polish after??

[@diydetailofficial]

Polishing removes a coating

[@sandwich1010]

Can the foam applicator be re-used? What about the buffing towels?

[@diydetailofficial]

Yes, once done using, dunk in your wash bucket 15-30 mins

[@wademiyataki9221]

Are you referring to Jerry(Trooper, The Boys in the Bright White Sports Car)? I think I was able to find the song you were referencing, I can’t say I remember ever hearing that on the radio, though…

[@diydetailofficial]

Correct, in Canada it played often in 76/77

[@wademiyataki9221]

Don't remember that on air here in the States. Either not big here, or it wasn't played on the stations my parents listened to. Credit the all mighty Google...

[@diydetailofficial]

Hopefully you found a new song to add to your playlist

[@3djooboy]

Did you guys do any SEMA coverage?

[@diydetailofficial]

Not this year

[@pete22440]

can this be used on a freshly painted hot rod Satin Black paint job. does it work well over a satin finish?

[@diydetailofficial]

Yes, it works great for satin. What’s your hot rod.

[@pete22440]

1956 chevy 210@@diydetailofficial

[@diydetailofficial]

Nice!

[@jonathanjoachim8891]

Would 1 week be enough wait time to wash my car for the first time after applying your 5 year ceramic?

[@diydetailofficial]

Yes, absolutely

[@carljackson6942]

I got a new 2024 Chevy Camaro Panther collectors edition it has black metallic tri coat paint on it. I want to ceramic coat it, would you polish it first

[@diydetailofficial]

If you like the paint the way it is, and the dealership didn’t put anything on it, then you’re good.

[@carljackson6942]

@@diydetailofficial I put some ceramic spray on it, so I guess I should lightly polish it off

[@M.D.MobileDetailing]

I've recently tried the fine grade clay towel from another company and was not at all impressed. Compared to my Griot's Garage synthetic clay the towel doesn't remove anything and is more difficult to use. I want to give the towel another shot using your ultra fine grade version but not sure that will make a difference.

[@diydetailofficial]

Yes, it will make you a friend of the towels.

[@jamesdodson9417]

Would a black light help with the coating

[@diydetailofficial]

No

[@JLLG2]

What is best way to check for iron contamination on dark paint? Its very easy on white paint😊

[@diydetailofficial]

Spray on the rear license plate

[@timallen1262]

Just curious, how cold can it be and still do a paint correction and ceramic coating? The reason I’m asking is that I don’t have a heated garage.

[@diydetailofficial]

50f, 40 at a bare minimum

[@timallen1262]

@@diydetailofficial Thank You!!

[@michaelblurry6559]

How does the water drain in your shop? Would love a vid showing the shop set up.

[@diydetailofficial]

We no longer have that shop, but it had drains under the tiles

[@michaelblurry6559]

@@diydetailofficial ahh got it! I think this might make a great video. Showing off shop set up etc. I'm sure it's been done, but you guys explain things well.

[@lorenzomaniaci]

Can you put ceramic coating over plastic cladding and rubber weather stripping?

[@diydetailofficial]

Yes

[@neilwalker5041]

The gloss is really dripping gloss and looks fantastic. I work by myself and on white paint the three towel method is good insurance. I grew up with station wagons and sitting in the back seat facing the car behind you was always fun when riding with your friends.

[@diydetailofficial]

Great memories

[@ken8516]

say i polish a few scratches, can i still apply ceramic coat to the spots i didn't polish?

[@diydetailofficial]

Yes

[@vongdong10]

I recognise this man. I've been out of detailing for quite a few years now. I remember seeing him work with optimum. What happened?

[@diydetailofficial]

He hasn’t worked at Optimum for years, Nick and Yvan started DIY Detail in 2022

[@user-yl5ym9pp6x]

Did you polish the front with the PPF? can you do same process on the ppf?

[@diydetailofficial]

We didn't polish anything for this vehicle, but yes you *can* polish PPF...just be very light. NO pressure, no heat, you're not trying to remover scratches or swirls you're just doing a light cleaning of the surface.

[@user-yl5ym9pp6x]

What about using the clay bar towel?

[@user-yl5ym9pp6x]

To be more specific, Claybar towel on the PPF

[@ac7384]

Do you need to polish a vehicle that’s 4 years old before ceramic coating it ?

[@diydetailofficial]

Ideally, yes

[@DetailingMadeSimple]

Easy way to coat a vehicle. New vehicles are great and way easier to coat. Especially something very prestine

[@diydetailofficial]

We agree!

[@chriss3959]

I thought I heard Yvan say in another video that the red sponge applicator is included when you purchase a ceramic coating. Is that right?

[@rooboy99]

It has been included whenever i purchase. However I don't use it as I find it slips around on my hand too much. I only use a block and suede towel. Much better use of product. A bottle goes further.

[@diydetailofficial]

That's correct! A bottle of coating comes with one red foam applicator

[@chriss3959]

@@rooboy99 thanks

[@chriss3959]

@@diydetailofficial thank you

[@js5994]

Can I use this same process on my vehicle that has 6k kms?

[@diydetailofficial]

Yes.

[@user-tm7cx1fe8i]

Are your products sold outside of US?

[@diydetailofficial]

Yes, diydetail.com/pages/distributors

[@JayRay61]

What pad are you using for the ceramic application?

[@diydetailofficial]

The one we provide with all our coatings. diydetail.com/products/foam-coating-and-sealant-applicator

[@JayRay61]

@@diydetailofficial oh, just found it in my C6 Hydro Lite Kit box. No wonder it was soooo heavy lol. Thx

[@franksattler6053]

No polishing for this vehicle. I wonder if you can just apply C6 Ceramic Adhesion Promoter Polish?

[@diydetailofficial]

Yes, we didn’t have that when this was recorded

[@singhVarunVikram]

Thanks for the great videos Yvan and Nick. Question about POST-graphene coating. 1) is graphene dust and bug and bird droppings repellent ? 2) Can I apply a spray for gloss ( eg bead maker) or Turtle Wax 53837 Hybrid Solutions Pure Shine Detailer Misting Spray after graphene coating or should I wait for sometime. I want to apply this to get gloss but also to avoid dirt and bugs/bird drop . ?

[@diydetailofficial]

If you used DIY Detail 3 year Ceramic/Graphene coating, yes it provides chemical resistance to help prevent bug/bird bomb etching. Wait at least a week before using any form of topper( it’s really not needed).

[@matthewkralik9426]

If a car has little marring and a coating and you want to put a newer coating do you have to polish to remove the old coating.

[@diydetailofficial]

Just a light polish, yes. The goal is to abrade that coating, no need to worry about removing it entirely

[@matthewkralik9426]

Thank you

[@richardmabe4186]

What do you do when the ceramic coating wears out?

[@diydetailofficial]

If maintained properly it will greatly outlast the stated time, but a light polish and re-application is all that’s required

[@RespawnAuto]

Where can I find that bucket and grit guard?

[@diydetailofficial]

Bucket is from a restaurant supply store. It’s a detail guardz insert

[@Mike-ny5fm]

Can those towels be reused for something else?

[@diydetailofficial]

Yes

[@keithernest6103]

This was the video I was going to look for but it just popped up on my screen. Thank you so much, excellent.

[@diydetailofficial]

Great to hear!

[@huseyinalskan5539]

What is the difference between these two towels ?

[@diydetailofficial]

Which towels?

[@gsanjeevkumar]

I a 10 year old Accord, parked in sun all these years. Want to Ceramic/Graphine can you make a video for that please

[@diydetailofficial]

We have many videos ceramic coating older cars.

[@mervinprone]

How did you get a Lexus out the door with all that dust on it? They would detail it before delivery…

[@diydetailofficial]

Not if the owner asked them too

[@phillipcraggs6202]

Funny thing is, none of these are protecting the paint. Unless your car is from the 1950's. Clear coat was invented in the 70's to do this job. It even has UV blockers. If you really want to have nice looking paint, wash and dry with a soft cloth, then clay bar and lightly wax twice a year. I'll use a wax/detailing spray once in a while. My paint looks like new.

[@diydetailofficial]

Ceramic coatings eliminate the need for periodic waxing.