How to clean REALLY DIRTY paint! Comparing 3 Products Side by Side

[@georgina_gsm]

“This is not your everyday run of the mill family hauler with traffic film on it”. Come to the villages of England in winter and that IS what your everyday car looks like 😂 What a lovely Christmas Day treat from you guys - Merry Christmas! ❤🎄

[@diydetailofficial]

Thank you.

[@loic4691]

Sneak peek of the next vidéo, i'm gonna watch this one carefully, i also take the opportunity to wish everybody a merry christmas, every diy detail enthousiasts and of course to our dear yvan, nick and Sylvie, joyeux Noël à vous 🤶

[@diydetailofficial]

Joyeuse fêtes Loïc

[@drmikeyb1]

I've learned so much from these videos and I thank you. Looking forward to your video to come. Wash to ceramic. I'm not performing this on my truck till after I have watched it. I'm not a beginner but not a pro, you keep your videos so simple. Thank you

[@diydetailofficial]

Thank you.

[@USA-Citizen1]

Of all the detailing channels, DIY is one of the best, or the best.

[@diydetailofficial]

Much appreciated

[@bigo573]

Ready here for this Christmas present from DIY Detail. 💯💪

[@diydetailofficial]

Enjoy!

[@somethingfishy1802]

Throw back to 9 years ago, on Lacroix Cruisers you posted and ONR vs Foam video!

[@diydetailofficial]

Yes, products have really evolved

[@JonC4296]

Real world application of your great products! Thats what we wanna see. Another great video!

[@diydetailofficial]

Thank you. Much appreciated.

[@mathewmukkada1585]

My New Year’s resolution is to do a one step paint enhancement with a palm sander and install diy details 5 year coating on my mom’s car. Thanks for the inspiration!

[@diydetailofficial]

Sounds like a great project!

[@BarryL_EV]

I was a bit intimidated by the process as well, but 18 mo later all my ceramic coated cars are beading up like the day I coated them. DIY Detail’s Gold Standard is so user friendly and gets the clear coat so smooooooth. Don’t overthink it, have fun and good luck. I picked my coating, then watched the manufacturer’s KZbin videos, you’ll do fine.

[@hartlanddetailer5670]

Don't forget the 3 stages of decon. before the polishing stage?

[@maryhoffman2547]

This will be a good one!

[@diydetailofficial]

Thank you.

[@alezxiccamposstp578]

Iván se emocionó mucho con los jabones 💯💯💯😂😂😂😂

[@diydetailofficial]

Thank you.

[@Ecdetails]

Great video yall showing the different in cleaning power

[@diydetailofficial]

Thank you.

[@NeilJohn-the-washer]

Great demonstration of chemicals doing the heavy lifting, thanks.

[@diydetailofficial]

Glad you enjoyed it

[@Slava-du8dw]

oh yes this is the foam we want to see 👍🔥

[@diydetailofficial]

Thank you.

[@gabrielsong7638]

The perfect christmas gift 🎉

[@diydetailofficial]

Thank you.

[@willsridecare]

People always assume pre-rinsing will help clean better and a pressure rinse alone will take care of all the grit… thanks for busting that myth with this video!!

[@diydetailofficial]

Thank you.

[@MegaFregel]

A car this dirty should be pre rinsed. You can see the effect of using a product is minimal. So don’t waste your money where the majority of work is done by the pressure washer. It’s not busting a myth. The evidence is right there in front of your eyes. Of course someone trying to sell your their product is going to tell you you need to use it at all times.

[@diydetailofficial]

The 3 panels that were treated were much cleaner than the panel that was only pressure washed. Plus with the chemical pre-treatment the paint doesn’t have a pressure washer pushing the dirt over the surface without lubricants

[@rosmarin2438]

Good use case for a two step touchless

[@diydetailofficial]

Not in this case

[@patient0x]

I think I ask the mud question about a week ago. Well here is my answer thanks! Where do you buy the keg for the rinseless.

[@diydetailofficial]

Stay tuned

[@Calihan]

Good test for the 3 products used, but I was hoping you'd "pre-treat" the front using just water! The 3 products used all were all applied with water, and nothing was used on the front. The water + product has time to work on the mud but the front had nothing. It'd be nice to see just water versus the other chemicals. For this specific use case, mud, water would work decently well all on it's own. For traffic film and other things? Not so much, obviously product has it's place. But for all these side-by-side comparisons, I never see anyone use just water as a pre-treat against the other things they're using.

[@diydetailofficial]

Stay tuned

[@BobBuddy_]

Surprisingly, the area that was only sprayed with water looked surprisingly good compared to the products. At least in this test.

[@diydetailofficial]

In person there was a big difference, also the pre-treated were much safer for the paint.

[@SLC_Eaglesfan]

Would you guys ever do all clean then followed by rinseless for the first rinse off? I hear you talk about doing all clean then incredible suds but just curious for winter washes coming up in the next few months

[@diydetailofficial]

Yes, absolutely

[@thiquelee]

Great video. Even with that first hit of Rinseless/foam/all clean I would have done a other presoak because man that vehicle was bad.

[@diydetailofficial]

Stay tuned, we do a full wash on the other side

[@ronayotte3571]

I saw a little Rad Garage influence on the rear quarter at the 7:26 mark... 😉

[@diydetailofficial]

Good eye!

[@C4DG3R]

Learning of the amount of dirt than can remain on the surface after a good prewash with any chemical was eye opening. I leant forward in anticipation when the blower came out 😅😂 thanks team

[@diydetailofficial]

Thank you.

[@njackson18]

Seems like the All clean is the winner here. therefore it should be the go to for most cleaning. Can u use the all clean the same way you use rinseless with a legacy sponge?

[@diydetailofficial]

DIY Detail All Clean isn’t a good choice for every day cleaning. The legacy sponge is best with DIY Detail Rinse Less Wash or DIY Detail Incredible Suds

[@njackson18]

@ thanks good to know. 👍🏽 much appreciated.

[@ChiTown-Zal]

Would you be able to do a rinseless wash if the car came out as the rear fender?

[@diydetailofficial]

Yes, with care kzbin.info/www/bejne/q6PcppioaLOogq8si=aqa5OTJ3OrDx49HT

[@Juicefree]

Yvan im mobile i use a ik with all clean for wheels and tires and pre spray for grill and side panels...should i throw a lil incredible sudes in there ?

[@diydetailofficial]

It will afford you a little more dwell time

[@Juicefree]

@diydetailofficial how much would you suggest?

[@Juicefree]

@diydetailofficial it's a ik pro 12 with a 1 1/2 gallons of solution

[@diydetailofficial]

One capful

[@DuncanNewton-w8i]

After that rinse can you not just use rinseless wash as its designed to be used ? with a bucket and sponge and DIY rinseless

[@diydetailofficial]

Yes, but as explained we would still do another pre-rinse in a case like this. Stay tuned for Sunday’s episode

[@TheMobileDetailShop1296]

Can you mix all clean with rinse less wash to get better cleansing with rinse off.

[@diydetailofficial]

No

[@TheMobileDetailShop1296]

Why because of chemical reaction by mixing .or waste of product.

[@diydetailofficial]

Both

[@peterbowman5750]

For this video, how long did you let the all clean dwell?

[@diydetailofficial]

About 2-3 minutes

[@jfarm_1311]

What about all clean, then soap spiked with some more apc for the foam. Double up on the higher ph cleaner

[@diydetailofficial]

Stay tuned

[@JustS0meNO0b]

can you clean it no pressure washer? with like pretreat and hose off

[@diydetailofficial]

It’s up to you to determine your level of risk

[@hasanbhayat8925]

The difference between the front and back wheel is all the proof you need to know the foam rinse foam works

[@diydetailofficial]

Thank you.

[@KaranPatel-xw3ef]

Can we coverup our car with car body cover after 1 hour of applying graphene coating, and if we coverup car then its still cureing under the cover without IR lamps ?

[@diydetailofficial]

Our coatings do not require IR curing and can get wet 1 hour after installation. We do not recommend a car cover

[@1stfrompuertorico568]

Ready

[@diydetailofficial]

Thank you.

[@jurre9892]

Anybody has any tips to clean the green residue of rubbers around the windows? And especially in between of those. Not specifically about the tool, but maybe more of a standard order of operations. For example window open or closed, foam, rinse foam etc. This is for cars that have not been taken taken care of. And are always parked outside. For your information, I always do chemical (mostly rinseless, sometimes foam), rinse, rinseless. With pre spraying some parts with a citrus cleaner. And still stuff is coming out of nooks and crannies sometimes. Any insights are much appreciated. Thank you for your time.

[@diydetailofficial]

During the contact wash stage use a soft brush. Use your wash sponge to flush as you are brushing

[@jurre9892]

@diydetailofficial Thank you! Sounds like I'm one of the overthinkers you are always mentioning. But I already knew that to be honest 🙈 Thank you for the reply amd the information!

[@hartlanddetailer5670]

I believe it is not only the tools you use, but the chemicals. Have you tried both a high pH soap and a low (Acid) soap? Have you tried using 3M non scratch pads or Mr. Clean Erasers? Have you tried a pressure washer? Or possible 4 #000O steel wool? Always start with the least aggressive method, both with chemicals & tools.

[@LazyJones]

Comment for engagement

[@diydetailofficial]

Thank you. Much appreciated

[@LazyJones]

No worries