Thank you for watching, If you learned anything from this video. Please consider following for future content!
Пікірлер: 71
@MrRollingdtime122 жыл бұрын
Also has outputs for head lights and tail lights along with turn signals just about anything you need as long as there's an output left for it. I'm using the FT550 with a rywire harness in my turbo b-series. Found a stock OEM female ecu plugend then crimped and solid all my own wires. Took a little time but came out just right.
@Sukanoops Жыл бұрын
I’m going turbo v8 and it sorta scares me to lose my knock sensor
@allmotorpete2 жыл бұрын
I used the Fuel Tech 4cyl harness and just crimped my Honda connectors on it.
@diymike2 жыл бұрын
How is she running bro?
@diymike2 жыл бұрын
Our eBay and Website : www.ebay.com/str/racepartsnow www.battlebornspeedshop.com
@josuegonzalez55772 жыл бұрын
Was good seeing you guys at IFO and thanks for the ft550🤟🏾
@stevemartinez7435 Жыл бұрын
So just to get this right Mike, I can buy the ft450 with the diy harness and I can chop off all my stock plugs and wire those to the new harness is that kinda what I'm getting
@Balakay94352 жыл бұрын
Still need a xxl crx t shirt
@vDub_mk5_ndo2 жыл бұрын
Yea I need 2XL crx shirt also
@unknownbikes51782 жыл бұрын
Let's do a J series FT600 in a 6 speed TL S type. I'm in Vegas own the FT600, A and B harness non terminated, FT 8 switch panel. 2 nano O2 sensors 1 for each bank. And most, if not all connectors and sensors. The TL is gutted and easy to work on. J swap Jason.
@diymike2 жыл бұрын
Bro I got an standalone aem infinity harness for a j32. Right now. Imma do a video on it.
@unknownbikes51782 жыл бұрын
@@diymike we should link up. I'm the guy that tossed Carlos some P2R gauge's when I hurd you got the J series build. Told him use them on whatever your team wanted, but hoped to see them on the j series build.
@unknownbikes51782 жыл бұрын
@@diymike also the engine build is a j32a3 with j37a1 crank, traum .5 over pistons and P2R rods, with their baddest CNC heads they make their vtec Killa cams that lose the outer cam lobes, all oversized Ferrera valves with all the goodies. It's going to start as a N/A build on E.
@braappaholic2 жыл бұрын
How much is that harness for the ft450
@BoostedRoads Жыл бұрын
Do you know anything about megasquirt on a honda
@yerinpinto6220 Жыл бұрын
You guys don’t have ek to k series harness??
@Omar-233612 жыл бұрын
Anyone know where I can find a ft450 harness plug and play for a k24?
@nitronick12202 жыл бұрын
Does anyone make a harness that lets me use my existing rywire engine harness but just lets me plug that and the fuel tech together for b series like you showed for the k series? Until i rewire the entire car from scratch for standalone?
@zongyang47072 жыл бұрын
this will sell..!!!!
@diymike2 жыл бұрын
I don’t about B series … but! Standalone harnesses are in the works currently
@harryazzole78142 жыл бұрын
Not sure if you found it yet but BoomSlang makes an adapter harness for the low low price of $700.
@nitronick12202 жыл бұрын
@@harryazzole7814 dude your a fu*king life saver 🙏🏼🙏🏼🙏🏼 thank you so much
@branduncensored3896 Жыл бұрын
I am confused about existing Honda fusebox and relays. As an example - the radiator fan relay wire goes to the fusebox right? Where would i connect my FT ecu wire for that? (btw this is for Honda Fit swap)
@Drizzy012 Жыл бұрын
I’m interested In the harness that you showed first. Got a price and availability?
@zachbenson818410 ай бұрын
Whats the link for the wirewhere 450 harness?
@jarrettlabate55959 ай бұрын
What do I need to run 8 injectors 4 on pump gas and 4 on e85 separate fuel systems k24 ft550
@sappk49089 ай бұрын
I need a jumper harness for my Fueltech ft550 on a sw20 K Swap MR2. The harness will have to be a tad bit longer to reach my dash. Can you accommodate this? I’m currently running K Pro on a K24a2
@greasychinesef00d Жыл бұрын
is the website still up? looking for a few k series plugs
@moparman1117 Жыл бұрын
Is there a easy kit for h series Honda
@angelluispacheco384611 ай бұрын
Hi do you have a fueltech harness plug-and-play for j32 Type-S ?
@sycboyspi2 жыл бұрын
I changed the fueltech out on my s2k ap1 k24 swapped for the Kpro V4 with Bluetooth, way better than fueltech
@chormoua12 жыл бұрын
For a mr2 would the kseries patch harness reach the cluster area
@Tripnidocedz Жыл бұрын
Where can i buy the plug and play for kseries harness?
@remytremblay24802 жыл бұрын
Is it posible to make adapter OBD1 to fueltech . I already have a race spec obd1 engine harness and PDM siwtch panel.
@seekerofgrace12472 жыл бұрын
How much is that junper to use with stock k20 harness? Couldn’t find it on website Thanks
@josuegonzalez55772 жыл бұрын
I just bought one and it’s $820 shipped
@Drizzy012 Жыл бұрын
You got a link
@Samvelxxx Жыл бұрын
will there be D series support ?
@stevenmejia49822 жыл бұрын
Got a fuel tech 450. Installing a factory spec K24Z1 into a dune buggy. What harness’ do I need to run it?
@Jesse22S2 жыл бұрын
Would you still need the sub harness for the k-series
@Mr.shortclipz2 жыл бұрын
How much do wire where cost
@MrDjcosmic142 жыл бұрын
awesome
@jonathangomez4996 Жыл бұрын
Does fuel tech work with an rsx
@Andy_Built2 жыл бұрын
Legit video very great information!!
@stevenmejia49822 жыл бұрын
Been hitting y’all up about the Wirewhere jumper to fuel tech 450. Be nice if y’all responded
@soraitzul49882 жыл бұрын
Would this work for a kswap on a ek9
@MrTDM09 Жыл бұрын
Mike I’ll message you. I’m in need of an upgrade. I’m on V1 and she’s about croak on me for the last time lpl
@OGAwsomSauce Жыл бұрын
A lot of k series but what about the classics.
@livinlow34592 жыл бұрын
What the cost for the harness
@christianmendez4075 Жыл бұрын
If you get a ft550 with k series rywire harness built for the fueltech will all turn signals/headlights functions still work ? 93 eg k swap
@vladimiryanez5387 Жыл бұрын
Any luck finding this out?
@veteransautomotive4392 жыл бұрын
Good afternoon, what about controlling your cam vtc gear? Will this work?
Yes it will. They have you wire it a specific way.
@TheMapleDaily Жыл бұрын
Just went AEM standalone, skip wiring and all that.. plug.. and play. Gotta realize being cheap is either going to get you a old s300 or you go above and beyond and get standalone.
@noticethenelsonsyet87902 жыл бұрын
What about the H series wiring
@diymike2 жыл бұрын
fueltech is universal, it will work on any motor from 2 cylinders to 12. all you have to do is wire it in. we will make some videos in the future showing you how to do it yourself to save some money.
@noticethenelsonsyet87902 жыл бұрын
@@diymike will you make a kit that wire up to the stock Engine wiring harness like how you guys did for the k series
@crimsonlegend41382 жыл бұрын
I know this kinda dumb but would this work on an a3 since its still technically a k series.
@diymike2 жыл бұрын
yes it will, as long as its wired correctly a fueltech can power any motor from 2 cylinders to 12
@gerardsuico20302 жыл бұрын
I have stock acura rsx type s, i want to change simple stuff like intake manifold, race headers, cold air intake, will this work?
@diymike2 жыл бұрын
Because you already have a k20, I would wait until you want more power out of your RSX for the fueltech
@gerardsuico20302 жыл бұрын
@@diymike i apologize, i am new on putting upgrades for k20. What do u mean by “wait until you want more power.”? I only want 275 hp to 300 hp all motor. No turbo, not doing k20/24. May u pls also help me with list i need to achieved even 275hp on my rsx type s? Thank u in advance.
@stmitch11952 жыл бұрын
Question, are maxpeedingrods connecting rods and pistons any good? I saw a few videos and they said they're good but just want to make 100%
@yeahman17562 жыл бұрын
Need a budget harness plugnplay b series turbo while using FuelTech.. hahahha
@diymike2 жыл бұрын
we will make some videos in the future showing you how to do it yourself to save some money.