How to Make Your Oven Heat Up Again: Oven Igniter Removal and Replacement (Samsung) 4K

Oven not heating up? That is because the oven igniter is no longer working. This video provides a step by step process for removing and replacing your oven igniter to get it to heat up again.
If you found this content meaningful and useful, please support this channel by subscribing and liking the video. Thanks!
DISCLAIMER: Below contains affiliate links, which means that if you purchase the products of the links, I’ll receive a small commission.
Link to product in the video:
DG94-00520A Igniter Replacement Fit for Samsung Gas Oven
amzn.to/3LdQFCC
Check out my other videos:
Fast and Powerful 48V 1000W E-Bike Conversion Kit: A Complete DIY Installation Guide for Beginners!
• Fast and Powerful 48V ...
How to Connect a Brushless DC Motor (BLDC) to Sensored & Sensorless Controllers (2021)
• How to Connect a Brush...
How to Charge a Battery--lead acid and lithium-ion batteries (2021)
• How to Charge a Batter...
Powerful Electric Bike Conversion Part II--Lithium-ion Battery Power Boost Upgrade
• Powerful Electric Bike...
How to Trap a Mouse With a Motion Sensor! (PIR motion sensor, a MOSFET and a pull-type solenoid) • How to Make an Electro...
How to Connect a Brushless DC Motor to Controller (48V 750W E-Bike) in English
• How to Connect a Brush...

[@johanna5437]

Thank you so much! I almost bought a new oven if I didn’t come across your video. It only cost me $26 to repair my oven. Your directions were really simple and easy to follow.

[@diypotentials]

I’m so glad for you. Congrats on the successful replacement. Thank you!

[@JohnCirignano]

I have no mechanical skills, but thanks to your well organized video, I was able to replace successfully this oven's igniter. I couldn't have done it without you. Have a pie on me!

[@BenjaminFranklin-l4y3d]

Super easy with your guide. We complained about our oven for months, found this video, bought the part and fixed in 15 mins. Saved lots of $’s because of this video 👍

[@diypotentials]

I love hearing success stories. Thanks for sharing!

[@ronlawrence5021]

Well documented, Sir. This will actually be the second time I'm replacing the bottom ignitor, and this was the perfect tuner.

[@diypotentials]

Thank you!

[@LauraFeatherston-c6b]

Thank you for these instructions!! I replaced my igniter and now the oven is working much better!!

[@diypotentials]

That is awesome 👏. Have a great weekend! Thanks!

[@chrisrondeau9912]

I’m sure this is somewhere in the comments but an easier way to access the wire harness is by pulling the oven out away from your wall and there’s a little opening in the rear. Super simple and no need to reach your arm all the way up and contort yourself!! Thanks for the video.

[@audreyscakes]

Im a baker my oven igniter went out. I just purchased the igniter, a little nervous about fixing it but with this guide I think I can fix it . Wish me luck !

[@diypotentials]

You will do a great job. We believe in you. Happy holidays! Thanks!

[@Nivlaek5thAge]

Same situation. Thank you for video. Worked great!

[@kenneth2581]

I have a slightly different Samsung model however this video was instrumental in the repair I just made to my oven thanks to you!

[@akeilatripp]

I’m sure you’ve heard this a thousand times. But thank you so much. I didn’t want to purchase a new stove before the holidays. This $20 burner saved me tons. Thank you. Your video was very detailed. I had a stubborn screw on the burner that didn’t want to budge. After days of extracting it… it finally loosened up and I’m back in business to cook my sweet potato pies before Thanksgiving.

[@diypotentials]

I’m so happy for. The sweet potato pies sound so delicious. I wish you can send some my way, but save them for the family. Congrats! Happy baking and have a wonderful thanksgiving! 😊

[@LJ-gn2un]

Three years old and mine has already crapped out ... GRRR! 😡 They don't build 'em like they used too! I was dreading changing this but you've made it look easy. Thank you for posting this helpful video!

[@diypotentials]

Thank you. 😊

[@ripuva1]

Thank you very much! That worked like a charm. 20 minutes and $22 to solve a problem we've had for months. Straightforward repair with your instructions. Thanks again.

[@diypotentials]

Thanks!

[@juliabigg7461]

Thank you. I am not an experienced handyperson, but you made this easy and saved me a lot of money by not hiring somebody.

[@diypotentials]

I’m so happy hearing that. Glad it was helpful. Thanks!

[@diypotentials]

I’m so happy hearing that. Glad it was helpful. Thanks!

[@johnerickson4064]

Very good video thank you! Wife called repair guy and he said $300 per igniter, watched this video and bought the part for $22.99 online and now it works great! Great instructions

[@diypotentials]

Love your story! Thank you for sharing!

[@barryobee1544]

Great video, completed the igniter change out today! Even though my oven was a different model, your video gave me the tools and confidence to complete! Last time (only 4 years ago) I had a service technician come complete and it cost me $280.00. This time, it only cost me for the igniter $24.00! Thanks again, much appreciate! 👍

[@diypotentials]

I’m so glad it was helpful. Thank you!

[@luannp7839]

Excellent video, you left nothing to the imagination. Clear, concise instructions. For some reason I thought that this would be something that I could not tackle so when my oven started making little "booming" noises trying to fire up correctly, I knew it was the ignitor and decided to call a repair person. Now I know that if it goes out in the future that I can easily, and inexpensively, fix it myself. THANK YOU!

[@diypotentials]

Thank you!

[@rickao330]

Thank you so much! You saved us lots of headaches, time and money! Our oven went kaput on the weekend so no handy men were available. It was kind of an emergency for us too since we rely heavily on our oven and use it multiple times a week. You explained everything and showed everything really well. I ordered the part on Amazon and was able to fix our oven as soon as I got the part within 2 days. Thank you again so much!

[@diypotentials]

That makes me happy. Congrats on the installation. Happy new year! Thanks!

[@rickao330]

Happy New Year to you as well! Enjoy those pies, they looked delicious!@@diypotentials

[@danwilson3011]

Any risk that gas leaks when you reconnect the burner to the gas tube?

[@diasforsaken]

Thanks!

[@diypotentials]

Thanks so much!!!

[@heathermisko7386]

Thank you so much for such an awesome video!! I've never done anything with an oven and i was able to replace the igniter on my own, thanks to you! Not to mention how much money it saved me! Thank you thank you!!!

[@diypotentials]

Congrats. Well done! Thank you!

[@myndwire]

perfect video, exactly what I needed. bottom igniter just went out today. ordered the part overnight from Amazon and will swap tomorrow. thank you!

[@diypotentials]

Good luck on the install tomorrow. Thanks!

[@magnus303]

Your video helped me to fix my oven without burning down my house, I appreciate it 😅

[@diypotentials]

I’m glad it was helpful. Thank you!

[@samuel1j]

Got my oven back up and running in no time thanks to you all simple steps I have notice that we are changing it every 7-8 month I know we use the oven often but wish it lasted longer

[@diypotentials]

That is awesome. Thanks for sharing!

[@charleshouse177]

Thank you sir, you are a great teacher and did not leave out any details. My wife is baking a pie now that our oven works again. All is well. All is well.

[@diypotentials]

That is great news. Thanks!

[@shannonshaddrix8067]

Thanks so much for your great instructions. Worked like a charm. We have the exact same oven. It would cycle on and start to heat up then it would cycle off. Kept repeating that on and off. Now I am cooking with gas! Lol

[@diypotentials]

Awesome! I’m glad it worked out. Happy cooking again. Thank you!

[@truthseeker502]

Add me the list of grateful and thankful doit yourselfers who were blessed by your video. You are a great instructor. Thank you for your help and guidance fir this repair.

[@diypotentials]

Thank you! And hooray to DIY power!

[@Legionofdoom98]

This is was extremely helpful, in how to fix but also helped in initial diagnosing. Amazon’d part yesterday and fixed in about 20 minutes. Saved lots of money not replacing, also my son only eats a certain type of frozen pizza so we were desperate to have it up quickly.

[@diypotentials]

So glad hearing the good news. Congrats! Thank you!

[@beachbobe]

Excellent step by step video. I was a bit nervous dealing with a gas appliance but this is fail safe if you follow along. Took about 30 minutes including cleaning the oven :- ) I used the OEM replacement part from Amazon BTW.

[@diypotentials]

Awesome!Thank you for sharing!

[@wpuclark]

$20 to fix mine. I am sure an appliance repair shop would have charged $500. Thank you for making this video. It took all the guesswork out of the job.

[@diypotentials]

Awesome! Thank you!

[@johnerickson4064]

Yep, my wife called a repair guy on ours they said $285 per igniter! I bought one online and put it in about 15 minutes, part cost $23

[@suds2628]

Great video! Super helpful. This is the second time I’ve had to replace the igniter on this stove. The video I found last time got the job done but yours was much better in terms of angles where to see the screws, and the order of unplugging the igniter beneath before removing or replacing the screws made it much easier. Pie looks delicious! Keep up the good work and THANK YOU! 🇺🇸🥧

[@diypotentials]

Thank you! I appreciate the kind words and comment! Best regards!

[@curtmoser4511]

Great video! Nice easy step by step instructions. Thought I might have to call a repairman, decided to give it a go myself. Took only 1/2 hour, cost me a total of $26.00!

[@diypotentials]

So happy to hear that! Great job. Now you can do more diy projects!

[@momentummikey6565]

you should have a Tip jar my friend!!! thanks for showing me How, and oven is working and apple crisp is cooking!!! much good Karma to YOU!!!

[@diypotentials]

@@momentummikey6565 So glad it was helpful and that apple crisp sounds amazing! Thanks!

[@JohnGonzales-k6n]

Thank you, my friend. Our Samsung oven went out just before Thanksgiving. But this did the trick to get it going again!

[@diypotentials]

I’m glad it was helpful. Thanks!

[@JohnS-m5t]

That worked , my stove is fixed. Thanks for the clear and concise video!

[@diypotentials]

Awesome! I’m glad it was helpful. Thank you.

[@andrewciraulo8851]

Just saved me a bunch of money - thank you, good sir!

[@emilydrumm1599]

Super helpful, thank you! I successfully replaced mine using your video.

[@diypotentials]

I’m so glad it was helpful. Congrats! Happy Holidays!

[@davidotto8677]

Excellent video. Nice job, especially with the apple pie included.

[@diypotentials]

Thank you!

[@sammontalvo8904]

Thank you. Waiting for prime delivery today.

[@roccomilana9803]

Thanks a lot for this video! Made it so easy. Thought I needed a new oven lol

[@audrabates4000]

Thanks for the help!! Your video made changing our igniter a breeze!! We knew exactly what we were doing! Thanks again!!

[@diypotentials]

I’m glad it was helpful! Thank you. 😊

[@MariHernandez-uy4cs]

You made this so easy to do. I absolutely love DIY especially since I don’t have to bother the hubby another honey-do. It’ll just add on to the list anyway! 😂. I’ve subscribed to you and look forward to more of your videos.

[@diypotentials]

Thank you for subscribing and I hope all of your diy projects will go well. Best wishes.

[@KarenLittlewood-o2j]

THANK YOU! Great video. Instead of unhooking the igniter from the oven drawer it is really easy to unhook from the back. I am still in the process of trying to replace as the front screw is so stuck that normal extraction methods are not working.

[@diypotentials]

Thank you for sharing. I hope you were are to remove the front screw.

[@DuncanGlendinning]

Thank you again! Second time replacing the igniter 😞

[@bobeldredge8870]

Excellent video. Only 1.5 years old and 4 screws were rusted and thankful for liquid wrench.

[@diypotentials]

I’m glad it was helpful. Thanks!

[@HORRUS29]

Thank you so much! This saved me from a very expensive bill.

[@diypotentials]

So glad it was helpful. Thanks!

[@jonathanwilliams1974]

Great video! Fixed my oven for $20!!!

[@diypotentials]

Thank you!

[@gaurd3]

2:53 I had to put a torch to that screw. Nothing is easy😂😂 thanks for the video

[@diypotentials]

That would be awesome to see on video. 😂!

[@ginnyabrams1]

those were such clear instructions. Thanks so much.

[@williamsnyder6514]

I'm so thankful for this video! I'm eating pizza right now! Subbed up and will watch for more of your content!

[@diypotentials]

Thank you! Happy Thanksgiving 🦃!!!

[@haroldsingh7713]

Great video with easy and simple explanations. I hope you get lots of pie from wife.

[@nicolasbouyiouclis4726]

Great video and great explanatory skills my friend.. I hope your own Lady got back to bake some delicious pies 🥧!

[@diypotentials]

Thank you!

[@anthonydounis3478]

Great video. Just finished replacing mine. All I had different was that to get the wires unclipped I had to pull the oven out from the wall and remove the back plate. Then they were right in there.

[@diypotentials]

I’m glad it worked out. Thanks for sharing. Happy holidays!

[@caseywanless3933]

I have the same oven and it quit working Christmas Day 2024. Same problem even! Just ordered the replacement so hopefully it fixes it.

[@bentedder311]

Thanks for the great video!! A very helpful guide that let me do this fix in under an hour.

[@diypotentials]

That’s awesome. Congrats!

[@skypax_2285]

Really good video, thanks for doing this...ordered my part tonight.

[@diypotentials]

Thank you!

[@ALynn-v5g]

Thank you! This is exactly my issue and I am looking forward to trying this fix

[@diypotentials]

I’m glad it was helpful. Good luck on your project. Thanks!

[@seancoffran2391]

We have the same oven and it just started doing this. Great video

[@diypotentials]

Thanks!

[@deborahotanjah]

Thank you, I’ll be trying this.

[@JenniferCoppersmith-hs4ni]

You give a Fabulous explanation and do excellent camera work!

[@diypotentials]

Thank you!

[@InformationSchutz]

About fell out my chair rofl along about step 8, 6:55, when I saw what looked to be Step 1! Not that the unit was usable at pre-check, but I sure don't have that sort of trust in Amazon and always try to ascertain correct replacement(s) are in hand. First. Anyway: thank you! A+

[@diypotentials]

Thank you!😊

[@kungyal]

Do you need to shutoff the gas and remove oven door for the repair

[@Skydude69]

About to do this myself. I noticed you selected convection bake and in none of your clips afterwards did I see the fan turning. My fan rarely if ever works and I'll be replacing that as well. Is this something you've noticed and/or done?

[@underdog576967]

My oven is not working as well Was wondering if the gas can be smelled in this situation? Ours does not heat up but can not smell gas .. Possibly the igniter has to work for the gas to flow ? Nice detailed video Will like Thank you

[@AquaCul2R]

well executed video thank you sir!

[@hotrailstohell]

Thanks bud! Oven was made 11/2017 and this is the THIRD time I've done this🙄

[@diypotentials]

Third time is a charm 😊. Thanks!

[@chrysshamilton]

Thank you! I just replaced mine, easy peasy! 😊

[@diypotentials]

Congrats, on a job well done! 🎊 🍻

[@Seacob]

Awesome explanation. Worked like a charm. Thank you for posting this!

[@diypotentials]

I’m glad it was helpful! Thank!

[@waelgerish]

Thank you I have the same issue Can you please send me the link to the part god bless you

[@PedroMPadillaEscajeda]

Hello there ... My bottom one if perfectly working, but I noticed you touch with your hand the one on the top. Was this to make sure it is hot and of course working? Let me share with you, my oven is leaking gas at the time I turn it on, but I do not know if it is related with this top burner, since I do not know when it has to be on You just mentioned you chage that one about one year ago after replacing the bottom one and I'm wondering if the change was due to a gas leaking or just not turning on. I hope you can help to understand this issue

[@ericaguerette6437]

Thank you so much super simple tutorial( I appreciate the link too makes it super easy to find)

[@diypotentials]

I’m glad it was helpful. Thanks so much!

[@WoWoverlord]

Thanks so much, very informative and wholesome.

[@diypotentials]

Thank you!

[@jacobhaines2915]

Your video was wonderful! Unfortunately, they had the front screw on the burner tightened so much that I stripped it before I could get it loose. I'm going to try a special screwdriver from work, but this could turn into a single screw making me replace the entire oven. I really do appreciate you putting this together though, it was super straightforward until I came to this issue (which obviously you had nothing to do with)!

[@diypotentials]

Thanks for reaching out. Sorry to hear about the front screw situation. I hope things will turn out well in the end. Best regards!

[@GabrielGutierrez-my4hz]

This worked for me as well. THANK YOU! Let’s go Warriors!

[@diypotentials]

Yes! Let’s go Warriors! Thank you!

[@southcoast23]

Thanks so much. Was able to follow your instructions and fix the oven quickly.😊

[@diypotentials]

I’m glad it was helpful. Thank you!

[@user-uz4ou8ni3h]

Great video. Worked perfectly! 🎉

[@shawnpierce7796]

Saved my day, thanks for sharing this

[@diypotentials]

That is great to hear. Thank you!

[@RoknRolla775]

Are the igniters the same for all Samsungs? It looks like I have the same oven as you but just wanted to know. Ty!

[@pluto124]

I have the same oven and I’m hearing the gas ignite and go out too often. Could this mean that the igniter is on its way out?

[@balkanacbosanac]

How long did you wait for igniter to come on after you replace it and you turn on 350 and then went down to 150 how long do you have to wait after that?

[@michaelr1248]

We have the same issue except it is intermittent. Most of the time the oven works but sometimes it will only get up to 175 degrees and we can see the glow of a flame. Do you think the ignitor is the cause?

[@jam9859]

Same

[@pluto124]

Did this turn out to be the igniter? I have the same problem.

[@joelags52]

Just saved me a couple hundy!! thanks bro!

[@diypotentials]

That’s awesome! Thanks!

[@eaglesquest7532]

Thank you for showing us how to fix the oven in a very clear and simple way! Save me a piece of apple pie please!😂

[@diypotentials]

Thank you!

[@Si_Mee144]

Can you do a video of the top igniter

[@tonyandmel]

Video well done and easy to follow.

[@kasandrasmith2851]

do i have to turn off the gas before i start this

[@josephneider7332]

Saved me a few hundo my man. wish you had more views

[@diypotentials]

Glad to hear my brother! Thanks!

[@tobygutierrez4303]

Thank you so much! This was extrermely helpful!

[@diypotentials]

Thank you!

[@RandomMotoThings]

You didn’t have to unplug the oven or turn the gas off at all to do this?

[@diypotentials]

The gas shouldn’t come on when your oven is off. You can always unplug the oven.

[@Chapelhillchiropractorcare]

Is the ignitor for the broiler and the oven the same. I have a similar issue, but since my broiler works (which we rarely use), could I just switch the working ignitor (broiler) for the broken one (oven)? Thanks!

[@diypotentials]

It should be the same igniter. I hope the project went well. May you can share how it is done on KZbin. Thanks!

[@stevebowman2556]

Thanks for the instructions, but the screw at 5:03 is difficult to grip with any of my Phillips and impossible to get out, I'm stuck on a Saturday night trying to get it out somehow.

[@DanielDeMars-l1v]

Thank you! Fixed just in time to host Thanksgiving!!

[@diypotentials]

Awesome! Happy Thanksgiving!

[@mikekelley6885]

I'm seeing a lot of negative reviews for the $20 replacement part not lasting. Can you let me know if yours had any longevity issues?

[@diypotentials]

No issues so far for me. Definitely, do research before purchasing. Best of luck. Thanks!

[@mikekelley6885]

@@diypotentials Thanks. This video was extremely helpful! Just replaced the ignitor last night and it's working great. Hopefully this ignitor lasts longer than the first one did.

[@stephbistro5799]

Great help and easy to follow. Thank you!

[@cliftonskinner4824]

Where did you purchase the igniter?

[@coffinshaker]

What model is the oven? What is the part number for the igniter? thx

[@spinnertv4544]

Hi - great video! Makes the repair look really easy. May I ask what model number your oven is? It looks very similar to mine but I wanted to double check before pulling the trigger on the part.

[@diypotentials]

Thank you! The model # is NX58H5650WS. Good luck on your project.

[@spinnertv4544]

@@diypotentials Thank you for your quick reply, my model number is slightly different but the part and method worked despite that! Thanks again for the video!

[@LM-Hoops]

Great video No extra stuff thanks a lot

[@diypotentials]

Awesome! Glad it was helpful! Thanks!

[@TracyWhite-m9p]

So I've replaced the igniter switch The flow of gas doesn't seem hard enough to make the oven heat warm enough it is taking a very long time to come up to temperature is there something more I need to do

[@dougthornton7605]

Awesome. Thanks. It was clear and concise.

[@diypotentials]

Thank you!

[@texasstealth1911]

Hello! I don’t have to turn off the gas? I freaked out when I saw you remove the tube and didn’t specify if the gas was turned off from the main line? Sorry I’m not sure if I explained that right. Please help me

[@diypotentials]

The gas should not come on when the oven is off. If it does come on when the oven is off, then you have a gas leak. I turned the oven off before I removed the burner. Please hire a professional if you don’t feel unsafe. Thanks!

[@BobZaborowski]

Thank you. I ordered my igniter. One question, why not turn off the gas to the oven. Is it necessary?

[@diypotentials]

The gas shouldn’t be able to come on when the oven is off. You can unplug the oven if you like.

[@BobZaborowski]

Thank you again for the helpful video. Replaced new and tested. All works just fine. Saved me a service call. God bless! @@diypotentials

[@drnotebook]

For safety reasons you should ALWAYS, ALWAYS turn off electrical and gas lines when you are working on the appliance. WHAT IF the gas valve was faulty and for some reason opened while you were working on it? SAFETY 101: Use your head and be careful when working on things that have energy sources that can kill you, poison you, or cause a fire (which could kill you).

[@sherylledbetter3202]

Oh my goodness, so glad I found your video!! I used your link and such a great price. Thank you so much.

[@KeithGrupp]

Great video!!! Thank you so much.