Chevy Cruze radiator sensor - AC off/engine temp needle not moving

[@DIYwithMichaelBorders]

Check out our DIY Raptor Club store teespring.com/stores/diy-raptor-club

[@tatumraul9845]

I realize I am quite off topic but does anyone know a good place to stream new tv shows online?

[@kofiamonu4245]

I like your idea of removing the 2 hoses before starting the video and explaining how they were removed. Some people show how they move parts out of the way and that diverts attention from the actual fix and makes the video too long. I have subscribed you.

[@DIYwithMichaelBorders]

@@kofiamonu4245 We really appreciate that, & thanks for subscribing. We subscribed to your channel as well. Welcome to the DIY Raptor Club. 😎👍

[@Steve-Kratz]

Just had this on my 2012 Cruze. Your tip about disconnecting the harness ends/sensor ends fixed it for me. Glad the parets weren't that expensive - I didn't need them, but for $15 each, I'll keep them on my spare parts shelf.

[@obamatrump5883]

Bro, I got the sensor out without that special tool. Being broke makes you creative.

[@DIYwithMichaelBorders]

Awesome Awesome & we appreciate you watching & sharing this. Being created is definitely an option. Welcome to the DIY Raptor Club. Enjoy your upcoming weekend. 😎👍🔧🔩

[@tsuga1987]

If you don't break the sensor off you can replace the radiator sensor without taking the coolant hose off. It's a squeeze, but it can be done and you don't have to drain all the coolant.

[@DIYwithMichaelBorders]

Thanks for watching & you’re spot on. We appreciate you sharing your thoughts. Hope all is well. Us fellow DIY’ers need to stick together! 😎👍🔧🔩

[@ele8019please]

Wow!!! The way thia guy explains is phenomenal

[@DIYwithMichaelBorders]

We appreciate that, thank you. We are hanging out watching college football and answering any and all questions for the DIY community. Let us know if we can help in any way. 😎👍

[@brandyh3536]

So funny you posted this today. I had this exact problem friday. Spent $400 at the shop getting it fixed.

[@DIYwithMichaelBorders]

Thanks for watching...$400.....😳 Well at least you’re back up and running with no issues. 😁👍

[@makerofmanythings8447]

Where is the coolant temperature sensor located on a 2014 Chevy Cruz diesel I can't seem to find any info. Please help if you can.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. For the 2014, the temp sensor is installed on the drivers side of engine & just below camshaft position sensor.

[@FireHorse11291966]

Michael before you replaced this sensor was your AC blowing warm air?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We 100% sure did. 😎👍

[@FireHorse11291966]

@@DIYwithMichaelBorders Thanks, your videos are how videos should be, right to the point. That is why I subscribed

[@DIYwithMichaelBorders]

@@FireHorse11291966 We really appreciate that, we subscribed to your channel as well.

[@austinw4845]

Hello. I recently had a coolant hose blow and replaced the hose. Now the car heats up, but when I start to drive it the coolant temperature and engine temperature keep dropping slowing back towards C. Do you think this is a sensor issue or a thermostat issue? The radiator fan has started spinning so unsure if related. Thanks!

[@DIYwithMichaelBorders]

Thanks for watching & we definitely recommend replacing sensors, both Radiator sensor & Water Outlet sensor. Try replacing the Radiator sensor first & see if that fixes issue. If not, Water Outlet sensor next. 😎👍🔧🔩

[@dustinchristian6043]

@@DIYwithMichaelBorders I replaced both of mine it worked fine for a day and now it's doing the same thing again...any suggestions?

[@DIYwithMichaelBorders]

@@dustinchristian6043 Thanks for sharing this, is your engine actually overheating or is it just triggering an error code?

[@dustinchristian6043]

@@DIYwithMichaelBorders from what I can tell it's not gauge stays constantly on c and does not move

[@dustinchristian6043]

Also if I remove and reconnect the negative it fixes it for a couple hours I'm going to try to replace the terminal tonight

[@pstreetgarage7304]

Great video. UAP claims both temp sensors are the same ???

[@DIYwithMichaelBorders]

Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. It means the world to us that you took the time to share a comment, thank you. Hope you have a great weekend. 👍

[@natalieleisten1764]

I’m showing the temp sensor is the same for the radiator and the water outlet. If I’m not changing the whole water outlet unit what sensor do you show as being the replacement?

[@DIYwithMichaelBorders]

Thanks for watching, the Cruze in this video is a 2012. Our sensors are different however your Cruze might have the same part number. In our case, it would cause havoc to our electrical system (Fault code wise) if our sensors were installed incorrectly. Below is a link to our video explaining more about the part number difference. kzbin.info/www/bejne/iWG4mqZ_mM56q5Y 😎👍

[@waynechernick3526]

I'm confused. Replaced water outlet plastic valve. Fixed leak. Then replaced coolant reservoir plastic. No leaks.

[@girlz1229]

The hose you have installed.. what is the part #? I have the 2014 Lt. Hose doesn't fit onto the radiator on the lower portion. Fits great onto thermostat housing side.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Don’t have the exact part # off hand. We recommend contacting your local Chevy dealership & providing them with the last 8 digits of your vin #. They will be able to get you the exact replacement part # for your exact engine. Whether you buy it from the dealership or elsewhere is your choice. Keep us posted on your project. 😎👍

[@foxman4489]

My Cruze get hot when the Heater is on and the heater gets so hot it smells like plastic burning. Plus, it smells like coolant at times. Any ideas? I did replace the water pump and temp sensor. I also replaced the radiator coolant sensor as well.

[@DIYwithMichaelBorders]

Thanks for watching. The coolant smell/odor is unfortunately a common issue with the Cruze. Below is a link to our video showing more about this. This may be your issue. kzbin.info/www/bejne/sITWeZeYZ56qh6M 😎👍🔧🔩

[@brpiper14b]

Im sorry Michael Borders to keep putting my 2 cents out there to people but im very expierenced with Cruzes i love them too much and love helping fellow owners out. So foxman to give ya some info on this.. in simple terms the 1.4 setup on the cruze is such a well setup cooling system in such a tiny package that the heat you will expierence in these getting INSANLY hot is completly normal. The burning plastic smell your smelling is more than certainly the heating up of GMs wonderfly designed cheap plastic that consists of the heating vents and doors that open and close depending on where u want the air going. Nothing to worry about just maybe adjust the temp down a tad once it gets warmed up so u dont boil yourself. The coolant smell altho could possibly be a leak starting to show itself near your coolant resivour or oil cooler line but more than likely if its not very strong than its probably just evaporating coolant due to you having the heat up so high. Have anymore questions just lemme know!

[@DIYwithMichaelBorders]

@@brpiper14b We really appreciate you taking the time to share. 😎👍

[@terrytorres7075]

@@brpiper14b my 2011 had a new radiator installed. Now, when idling the fan kicks on about every 12-14 seconds and it's loud and annoying, especially when I'm at a drive- thru. No overheating issues what so ever. Also, I was in my kitchen and had car running and I heard a loud pop, got in car and spelled coolant and a little mist. I turned off car and later drove it, no overheating, but slow coolant leak somewhere, help plz...

[@topmysteric1157]

I own a 2011 Chevy Cruze 1.4, my temp gauge will go just above half and linger for a few seconds and shoots back down to below half where it should.. I've had problems with my valve cover gasket causing my serpentine belt to sling oil everywhere and my question is there is a sensor connector below the belt on the engine shield that is covered in oil could that be the temp sensor connection thats gone bad because of the oil? Asap response would be great 😃

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. That can definitely lead to issues with the electrical system and error codes being triggered. We recommend carefully cleaning electrical connection point and seeing if that makes a difference. Make sure your engine is off as you clean electrical points, keep us posted.

[@topmysteric1157]

@@DIYwithMichaelBorders thanks for the reply helps alot I've also noticed my head lights flickering and the dash infotainment system screen will also flicker for a split second and it seems when it does that the temp gauge rises

[@DIYwithMichaelBorders]

@@topmysteric1157 You are very welcome. Sounds like there’s something loose...electrically...🤔

[@topmysteric1157]

@@DIYwithMichaelBorders yea I heard the cruzes run up to 240 degrees max maybe a lil over for the eco models more fuel efficient for hotter engines as long it doesn't reach 260 no serious damage will happen that's what the book says it can safely operate at 240

[@DIYwithMichaelBorders]

@@topmysteric1157 Keep us posted. 😎👍

[@lazarofernadez4619]

How can i know the diference betwen both senser please

[@DIYwithMichaelBorders]

Thanks for watching, below is a link to our video that discusses the difference. kzbin.info/www/bejne/iWG4mqZ_mM56q5Y 😎👍

[@alonsogutierrez3437]

I got the same problem needle ain't moving and no cold air coming out I think. That make the ac clutch not turn on

[@DIYwithMichaelBorders]

Thanks for watching & a few things can cause this. In addition to the part shown in this video, your radiator sensor as well as your water outlet sensor can cause this in the event that either of those sensors are faulty. Keep us posted on your project. 😎👍🔧🔩

[@alonsogutierrez3437]

@@DIYwithMichaelBorders thank you a lots

[@DIYwithMichaelBorders]

@@alonsogutierrez3437 😎👍🔧🔩

[@johnnyconrad4859]

Will this cause a wrong reading at the gauge Replaced the thermostat a it had one on it too

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Great question, it most definitely can. 😎👍

[@ivanbarbosa3132]

How did you end up getting it fixed? Thanks

[@jxrmz9739]

Hi just a question is this the same sensor part as the engine coolant temperature sensor?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. All sensors have different part #’s & are slightly different in design. Radiator sensor is different than water Outlet sensor... It’s very important to ensure you’re installing the correct sensor to their respective part as the onboard computer will detect a fault when the part has the wrong sensor installed inside it. Hope this helps, let us know if you have any additional questions, us fellow DIY’ers need to stick together! Enjoy your weekend. 😎👍🔧🔩

[@jxrmz9739]

@@DIYwithMichaelBorders Thanks for the quick response! Great channel, just subscribed 👍🏻

[@DIYwithMichaelBorders]

@@jxrmz9739 We appreciate that, we subscribed to your channel as well. 😎👍🔧🔩

[@4-saken]

Are you sure that the two sensors are different? Do you have links to them? What year Cruze is this?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Below is a link to our video talking more about the Outlet valve & difference in sensors. kzbin.info/www/bejne/iWG4mqZ_mM56q5Y Hope this helps. Enjoy your day. 😎👍🔧🔩

[@chicanomarquez5304]

@@DIYwithMichaelBorders will it also couse your fan 2 kick on at high speed

[@DIYwithMichaelBorders]

@@chicanomarquez5304 It will indeed. It will also lead to your fan turning on and not turning off the entire time the engine running... which you and I both know... it’s not normal. 😎👍🔧🔩

[@mbeach9175]

Hi! So my clip was dropped once putting everything back into place and we’ve been unable to located it. :( Any clue where I can get a replacement? I’ve been searching all over the place with no luck.

[@ashrafsiddiquee3190]

Hi Mike Which greace shell I use on steering shaft on 07 camry ?? Please let me know 🙏.

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you reaching out to us. This will depend on who you ask. Most people will purchase the standard grease from their local AutoZone. Please keep us posted on your project.

[@ashrafsiddiquee3190]

@@DIYwithMichaelBorders thanks. I did lots of DIY work on my 14 cruze. I don't have that vehicle anymore. So thank you. I didn't understand properly about that steering shaft greace. So shell I use white lithium greace ??

[@DIYwithMichaelBorders]

@@ashrafsiddiquee3190 Thanks for the reply, we haven’t used lithium grease in the past, can’t give you a confident answer.

[@ashrafsiddiquee3190]

@@DIYwithMichaelBorders oh ok I understand. Thank you

[@DIYwithMichaelBorders]

@@ashrafsiddiquee3190 😎👍

[@chrisrussell2592]

Changed both upper and lower sensors, still no change in gauge. It will sometimes climb slightly then drop back down. Thermostat was changed 20,000 miles ago due to failed heater thermostat sensor. Worked perfectly till now. Any thoughts would be appreciated

[@lloydbrown6569]

Same for me

[@lloydbrown6569]

Did u figure it out

[@BrianReichenberg]

Thermostat

[@theoneroutsos4577]

Hi my holden cruze cooling fan only comes on when the ac is on. Temperature gauge is in the middle. What could that be ? Thanks

[@theoneroutsos4577]

My car is cruze 2016 model had recently changed the water pump and thermostat

[@DIYwithMichaelBorders]

Thanks for watching, looks like your engine is operating properly. Since it’s not overheating and engine temp needle remains under 1/2 way point, looking good. 😎👍

[@theoneroutsos4577]

@@DIYwithMichaelBorders thank you for the info, the fan works after long drive in hot weather today👍

[@DIYwithMichaelBorders]

@@theoneroutsos4577 That’s what we’re here for, we DIYers need to stick together!! 😎👍

[@jekisgod]

Was doing this for my car with my dad today and he dropped the clip because we couldn’t figure out how to secure the clip back on the temp sensor ☹️ rip learned some new swear words today

[@DIYwithMichaelBorders]

Thanks for watching & this little sensor is a tricky one. What’s your update, were you able to fix your sensor and get your vehicle back up and running properly?

[@jekisgod]

@@DIYwithMichaelBorders Unfortunately no, we were short on time today so we are gonna see if we can get the pin out of the engine bay with a magnet sometime tomorrow, we got the sensor in but lost a lot of coolant in the process. Just hoping when we do get the pin we can secure it onto the sensor with out much hassle. I knew we should’ve done the water outlet sensor first because that radiator sensor is a little tricky to get to 🙄

[@DIYwithMichaelBorders]

@@jekisgod Thanks for the reply and by calling your local Chevy dealership and providing them with the last 8 digits of your VIN #, they can get you the exact replacement clip for your exact vehicle Sensor. Probably only cost just a few bucks...that’s if you can’t find yours.

[@jekisgod]

​@@DIYwithMichaelBorders We managed to locate the clip and secured both the coolant sensors into place. However, when I was on my way to work today the AC off due to High Engine temp flashed back on. I had just replaced my coolant when we were working on my car the other night, come to find out it was basically all drained. Now, the leak seems to be coming from the passenger side, which means the leak is probably from either that coolant temp sensor not being secured properly, or the water pump. What do you think my next step should be?

[@DIYwithMichaelBorders]

@@jekisgod Thanks for the reply & the sensor goes in a specific way & if not inserted 100% the correct way, it will leak...so annoying isn’t it...🙄

[@toorroot8867]

What’s the name of that sensor

[@DIYwithMichaelBorders]

Thanks for watching, this part is your Radiator Coolant Sensor. Hope this helps. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@Hnbearor]

so is this fixing the ac off due to high engine temp when my temperature gage says its cold??

[@Hnbearor]

also my fan runs constantly??

[@Hnbearor]

also what is the part number for the temperature sensor?

[@a-pie21]

I'm about to do this and the pn of the one I have is SU13822

[@sooflex15]

@@Hnbearor did you figure what it was?

[@Hnbearor]

@@sooflex15 I replaced both my coolant sensor by the radiator and my thermostat and it fixed the problem.

[@diegoobs8256]

So the problem was the temp sensors? I'm having the same problem my temp gauge not move and its say ac of due to high enginge temperature but the car runs good

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. It was indeed. 😁 Let us know if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩

[@leenorarobinson5886]

@@DIYwithMichaelBorders I have the same problem ac shut off I had both senors change nothing changed my radiator fan is running always except when car is off what else can I do?

[@DIYwithMichaelBorders]

@@leenorarobinson5886 Thanks for reaching out to us. Have you replaced Thermostat since owning Cruze? There is a sensor inside thermostat that can also trigger the symptoms however you have to replace the entire thermostat to replace the sensor inside. Keep us posted. 😎👍🔧🔩

[@leenorarobinson5886]

@@DIYwithMichaelBorders I did have the thermostat changed and after driving the car for about 30 minutes the air started to come on cold I hope the problem is fixed mechanic wants to tell me it's an electrical issue haven't seen anything online that states that.

[@DIYwithMichaelBorders]

@@leenorarobinson5886 Thanks for the reply & an electrical issue seems possible...🤔...if it’s solely referring to the electrical connection points & sensors.

[@gerardobaciliopozar9305]

Hello what would be the part number for the top sensor sir

[@DIYwithMichaelBorders]

Thanks for watching, is yours a 2012 1.4L Eco? If so: AutoZone- (SU13822)

[@gerardobaciliopozar9305]

@@DIYwithMichaelBorders it’s a 2015 Chevy Cruze 1.8 lt

[@DIYwithMichaelBorders]

@@gerardobaciliopozar9305 Thanks for the reply, it’s best to check with AutoZone for the part number for your 2015. 👍

[@gerardobaciliopozar9305]

@@DIYwithMichaelBorders sorry it is a 2015 Chevrolet Cruze 1.8L FI DOHC 4cyl

[@DIYwithMichaelBorders]

@@gerardobaciliopozar9305 Thanks for the follow up, no worries. You can even contact your local Chevy dealership and provide them with the last 8 digits of your vin number. They will be able to get you the exact replacement part number for your exact engine. At that point, you can either purchase part from local dealership or use that part number and buy elsewhere. 😎👍

[@THUNDER_CLAP_213]

Anyone know the part number for the other sensor that he talked about

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. Below is a link to a video that shows the p/n of both the Radiator sensor as well as the Water Outlet Valve sensor. kzbin.info/www/bejne/iWG4mqZ_mM56q5Ysi=T8ynbL_XiKQDfTZJ Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@feferai3636]

I am having trouble with replacing that clip on the sensor. What do I need to use?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. It’s very important to position the sensor itself properly into the radiator. In the event that the sensor is not shifted into the radiator insert properly, it will not go in all the way & seat flush internally. In this case, the actual clip will not be able to slide in & lock the sensor in place to create the water tight seal. We recommend carefully positioning the sensor into the radiator as shown in this video. Please keep us posted. 😎👍🔧🔩

[@asimalshaheri7136]

I still can drive the car or no

[@kinggage]

I changed the radiator sensor and engine sensor still have same problem with loud fan noise

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. At this point, you may need to replace your Thermostat. Below is a link to our video showing replacement of Thermostat. kzbin.info/www/bejne/bneQYmqthKmUmrM Keep us posted. 😎👍🔧🔩

[@JoeCAlvarado]

It's your fan resistor that it's located in back of coolant fan. Need to take whole fan off and replace it. Or try just replace the resistor.

[@JoeCAlvarado]

Theirs also 5 relays and 2 fuses for the fan check those first.

[@DIYwithMichaelBorders]

@@JoeCAlvarado Thanks for sharing this, you Rock!

[@emzdarlington9661]

Did u find i fix? i replaces radiator sensor & thermostat, still same issue

[@veggiepowered]

Iam Your Newest Subscriber Great Videos I Can't Believe You Laid The Tube Down On The Ground In Dirt Could Have Gotten In The Turbo Doing That. Other Cruze People Leve That On And Turn It The Other Way So Nothing Can Fall Into The Turbo

[@DIYwithMichaelBorders]

Thanks for watching & subscribing, we subscribed to your channel. We appreciate you sharing your advice, any & all helpful info is greatly appreciated. 😎👍🔧🔩

[@priscillaflynt815]

We replaced sensor Friday. Drove car all weekend and same thing happened again Tuesday. Any idea why?

[@DIYwithMichaelBorders]

Thanks for watching & you may need to replace your Water Outlet Valve which has a sensor inside it. Below is a link to our video showing replacement of it. kzbin.info/www/bejne/jmK2aZ-fg92Mg9U 😎👍🔧🔩

[@priscillaflynt815]

@@DIYwithMichaelBorders thank you for responding. It ended up being put in a Diagnostic Machine. Thermostat was stuck open. Are at least that was what we were told. Had it replaced today. Crossing our fingers that will fix the problem. Again thanks.😀

[@DIYwithMichaelBorders]

@@priscillaflynt815 Great to hear & thanks for the update. Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@ivanbarbosa3132]

@@priscillaflynt815 Hi Priscilla. Can you please tell if replacing the thermostat fixed the problem?

[@lilzeeKali]

Is it safe to run the car like this?

[@DIYwithMichaelBorders]

Thanks for watching & we recommend replacing your sensor once it fails. If not replaced, your system will be reading unreliable coolant temperatures & causing additional issues with engine. Hope this helps, enjoy your day. 😎👍🔧🔩

[@davidgrein6294]

First check for OBD2 P217 code and erase. If your car threw P217 code it will stay even if problem was fixed!

[@DIYwithMichaelBorders]

Thanks for watching & sharing this advice. Any & all helpful info is much appreciated. Hope all is well David. 😎👍🔧🔩

[@daniellipp2883]

Thanks for the video. I have a 2014 and it’s got the same AC off due to high temp and cold gauge reading. The check engine light turned on too. So I’m gonna change out that sensor along with the water outlet one and hopefully the check engine light turns off

[@Thatoneguyviner]

Any update : I’m looking at mine too it’s doing the same thing

[@daniellipp2883]

@@Thatoneguyviner in total, I’ve replaced both sensors, the water outlet and the thermostat. It’s still coming up. Only thing that temporarily fixes it is disconnecting and reconnecting the battery. The gauge rarely gets to a proper reading. I’m gonna have to take it somewhere.

[@Thatoneguyviner]

@@daniellipp2883 thanks hella annoying

[@chrisrussell2592]

These cars are pure junk. My daughter's 2011 has constant problems and only has 61000 miles. Trans control module went out at 47000 and GM wouldn't help due to age. Thermostat went out at 50000.valve cover gasket failed at 55000 and was dumping oil into the spark plug wells. Now this bs

[@majcm58]

@@daniellipp2883 I've had the same problem. Changed both sensors and thermostat....still getting the error message and temp gauge is stuck on COLD. So frustrating. What did you end up doing??

[@POPINTHETAPE]

Replaced the radiator sensor but now when I add coolant it completely drains it as soon as I do so and starts to leak from that sensor

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Have you verified the sensor is installed correctly? If not positioned correctly, the sensor itself will not seat properly. Keep us posted. 😎👍🔧🔩

[@rickmartin2168]

Also make sure old gasket came off with old part.

[@TheAntsgood]

I'm replacing mine because it is leaking from there. Does anybody know if I can just use some liquid gasket or something like that?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. If new part is installed properly, you shouldn’t run into leaks. Keep us posted on your project. Enjoy your day! 😎👍🔧🔩

[@TheAntsgood]

@@DIYwithMichaelBorders Yes got a new Temperature Sensor and installed it stopped the leak.

[@DIYwithMichaelBorders]

@@TheAntsgood Very cool & we appreciate you taking the time to share this. Enjoy your Cruze! 😎👍🔧🔩

[@TheAntsgood]

@@DIYwithMichaelBorders Thank you My next step is to purchase a scanning tool because I now have a check engine light on. Maybe you can recommend one or you can do a review on one?

[@DIYwithMichaelBorders]

@@TheAntsgood Thanks for the reply. We purchased the Bosch 1300. Below is a link to our review video on it. kzbin.info/www/bejne/eqfSmJyInax4j80 You also have the option to visit your local AutoZone where they will read your codes for 100% free. 😎👍🔧🔩

[@z0b622]

Sometimes it's just a fluke. Use a scantool to erase and see if it comes back on before going through this process. Codes or no codes, a scantool will erase this.

[@michaelcallan4523]

I changed the upper sensor and now my a/c and cooling fan is not working

[@joeperez4362]

My son's 2016 is doing the same, a/c not working and fan doesnt turn on. Gauge doesnt show it overheating which is weird, what was wrong with your's?

[@ricardos5899]

Thank you so much

[@DIYwithMichaelBorders]

You are very welcome Ricardo, thanks for watching. 😎👍

[@paulhager1281]

Bro u rrally.need unhook anything...I changed mine on the side of.the road

[@DIYwithMichaelBorders]

Thanks for watching and sharing your thoughts.

[@bigjames9578]

Real problem with the clip and sensor is pushed all the way in

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Let us know if you have any questions.

[@oscarmorales6446]

Grasia

[@DIYwithMichaelBorders]

Thanks for watching, let us know if you have questions.

[@BlakeMcPherson-Smith]

You dont even go over the location...

[@DIYwithMichaelBorders]

Thanks for watching…?

[@oscarmorales6446]

Tko

[@DIYwithMichaelBorders]

😎👍