How to Air bleed Mercruiser outdrive Trim rams and hoses

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Fixing boats/Jet ski PlayList: • Fix Boats / Jet Skis /...
************
1. Handheld inspection mirror: amzn.to/4738hIY
2. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb
3. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5
4. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d
5. Quicksilver grease gun: amzn.to/3uOFgDG
6. Alpha one gen 1 Trim Rams:
amzn.to/3GwSt6C
7. Trim Ram Hydraulic Hoses:
amzn.to/4a9rf3x
amzn.to/486qVAE
8. Trim Ram plastic caps: amzn.to/3NlBV5b
9. Extreme Grease: amzn.to/46TgwY4
10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq
***********
1. How to install outdrive to boat
• Install Mercruiser alp...
2. How to replace Trim Rams and Hoses
• Replace Mercruiser out...
3. Replace Anode kit
• Replace Mercruiser out...
4. Replace outdrive bellows/shift cable (PART 1)
• Replace Mercruiser alp...
5. Outdrive upper unit rebuild (PART 1)
• Replace Mercruiser upp...
6. Outdrive Lower unit rebuild (PART 1)
• Mercruiser outdrive lo...
8. How to grease your outdrive grease fittings
• How to properly add gr...
👍😎

[@DIYwithMichaelBorders]

If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. Fixing boats/Jet ski PlayList: kzbin.info/aero/PLjCXOz8TSkZlae2qY97uVVTm3JdBOUoRS&si=0QF9J0YNrNOKii3a ************ 1. Handheld inspection mirror: amzn.to/4738hIY 2. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb 3. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5 4. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d 5. Quicksilver grease gun: amzn.to/3uOFgDG 6. Alpha one gen 1 Trim Rams: amzn.to/3GwSt6C 7. Trim Ram Hydraulic Hoses: amzn.to/4a9rf3x amzn.to/486qVAE 8. Trim Ram plastic caps: amzn.to/3NlBV5b 9. Extreme Grease: amzn.to/46TgwY4 10. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq *********** 1. How to install outdrive to boat kzbin.info/www/bejne/fpiwhHqfiM51d5Y 2. How to replace Trim Rams and Hoses kzbin.info/www/bejne/pJzGd4yiasd_bcU 3. Replace Anode kit kzbin.info/www/bejne/p6rCopaihZiti7M 4. Replace outdrive bellows/shift cable (PART 1) kzbin.info/www/bejne/hJSyk4eFjr2nh68 5. Outdrive upper unit rebuild (PART 1) kzbin.info/www/bejne/n2jRg32Gl7eMhqs 6. Outdrive Lower unit rebuild (PART 1) kzbin.info/www/bejne/m5m3cmd4h61nqpo 8. How to grease your outdrive grease fittings kzbin.info/www/bejne/baKUpHWrZbmmhtk 👍😎

[@davestewart9146]

Step by step video, love it, thanks Michael and Merry Christmas to you and your family 👍😁

[@DIYwithMichaelBorders]

Thank you Dave, this was an important video for us to create and have available to the DIY community. Merry Christmas to you and yours.

[@billybobsowbreath1774]

I have a 2001 5.0 Mercruiser. My manual says I can use 10W30 or 10W40 engine oil for the trim pump. Far cheaper than the Mercruiser trim fluid.

[@becauseisaidsoxxxx3717]

Great instructions, thank you!

[@AM-bk9ei]

Great video! I like using quick silver products for marine equipment too.

[@DIYwithMichaelBorders]

Good morning ☕️. Thank you, same here. A very good, reliable, and respected brand. 😎👍🧰

[@AM-bk9ei]

@@DIYwithMichaelBorders Merry Christmas!

[@DIYwithMichaelBorders]

@@AM-bk9ei Thanks man, you too! 👍

[@azraghcca]

nice job!. when cycling up/down... wait a min between cycles. Air gets whipped into fluid/reservoir. Waiting a few gives air a chance to separate from oil.

[@DIYwithMichaelBorders]

Good morning ☕️ thank you. We are honored you took the time to share your thoughts and additional advice. Any and all helpful info is greatly appreciated here on our channel. 😁👍🧰

[@nickw8743]

You should do voiceovers on every “how to” video

[@DIYwithMichaelBorders]

Good morning ☕️ we appreciate you watching and sharing your thoughts and feedback, always welcome here on our channel. Not a bad idea…🤔

[@AchikSarih]

Merci beaucoup ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@DIYwithMichaelBorders]

Thank you for reaching out to us. 😁👍

[@jimbradley727]

If I am only replacing the lines and not the trim ram, is the bleeding less comprehensive?? I was hoping that I literally could just crack the lines at the connection to the rams and get the air out of the lines that way.. Plz advise..

[@georgerisberg131]

same question

[@clayvick88]

Can you drain all the fluid out by just taking those lines off and trimming up? Think my fluid needs replaced to not just topped off

[@DIYwithMichaelBorders]

Thanks for watching ☕️ You can however please please please don’t run it dry. You will need to replace pump motor and possibly other parts…not good.

[@TomOnTheRun]

How do you locate/purchase mercruiser 4.3 trim ram plugs? I'm ready to bleed my hydraulic trim pump lines.

[@DIYwithMichaelBorders]

Thanks for watching, we can definitely help. We will need your Outdrive serial number located on drive. Looking forward to hearing back from you. 👍

[@demetresichinava5088]

👍👍👍👍

[@DIYwithMichaelBorders]

Good morning, thank you. We hope this video is helpful for many. 👍☕️

[@demetresichinava5088]

@@DIYwithMichaelBorders 👌👌👌👌👌🤝