DJ Lighting - Getting Started with QLC+

[@StephenBrown85]

This is a great tutorial! This software is not obvious but you explained it very well. The other videos people have done on QLC+ were so boring I couldn't bear to finish them!

[@dobrinmarius710]

@StephenBrow85 I had the same feeling, others bored me to death but this guy, this guy is my man! 😅🥂

[@DovahDoVolom]

3 years later and this has helped me alot!

[@andrem.musiek]

This is just awesome, I’ve just started with QLC+ and Unreal Engine 5 DMX integration and this helps me a lot on light head movement automation

[@DuesGibGolfandLife]

CAn you make more of these. there is nothing online about how to set up stuff like this

[@SpiritualAlien]

Best tutorial on QLC+ that I have yet found on KZbin (or anywhere else for that matter)! Look forward to more - good job!

[@dericy1983]

This video helped me so much!!!!! I'm using it with an AKAI APC mini MK2 and ENTTEC open DMX

[@cw5522]

Thanks for this and your ArtNET series, it's really helped me upgrade my school's lighting system and make my life a lot easier with Wi-Fi and stuff. Keep up the good work!

[@ToxemicCarton]

Awesome stuff! Simple and to the point. Keep making these videos!

[@JoãoOliveira-i2i]

Just start using dmx and by watching your videos help me a lot tkyou

[@jaxbom1]

you are a proo!! And have great talent for tutorials, thank you!! I learnt the basics features of the software very good with this.

[@camk2552]

This was a great demo of the software thanks. Please do more

[@christintauriainen8816]

excellent tutorials! I'm not one to watch these but I like your style and presentation. I learned a lot :)

[@electrocarbid]

Thank you so much for the cool getting into video :)

[@howierodman4954]

Thank you for sharing your knowledge. I have been using Freestyler and starting to learn this program. Huge differences.

[@Anton-du-Fleur]

Seriously, A great tutorial Helped so so much

[@DoYouDJ]

Been looking for hours lol Thanks you the GOAT for doing this for us regulate non coding DJs

[@ryann0213]

tnx! helped me alot, can you make more videos for qlc+

[@emanueldevos]

What a awesome tutorial, thank you very much sir!

[@lanphanh]

Excellent tutorial!

[@attilapal3786]

im blown away. thank you for this video

[@cheeto4493]

FYI at 25:55 QLC has removed the dimmer control option in the RGBmatrix

[@TylerHarney]

I can't seem to get RGBmatrix to show anything

[@Yestalgia]

Add a dimmer @@TylerHarney

[@UOttawaScotty]

Excellent video ! Thank you so much for making this video !

[@nicholaswalker23]

Super helpful man, thanks so much

[@PotentStudios]

Great overview!

[@HenrikFaehrmann]

Do you know if it is possible to let the fixtures reset outomaticly when you have them playing in Sound Sync Mode? If I change to the next sound to light button it keeps the last value of previous the sound to light effekt.

[@NikoSatiaNuryanto]

Thanks, can you make with midi controller for input macros?

[@philipmumford4]

I’m trying to have a simple cue list that I can fade between cues as the computer we’re using runs multiple things. All we use is static scenes with basic color combos but I want to fade between them so it’s not a harsh switch?

[@Ender_Greg]

Great video ! thanks

[@christintauriainen8816]

I have a MidiPlus smart controller and would like to know if it is possible to assign functions to it fron QLC+.....?

[@djrensvandeburgt1236]

Thanks for making the video

[@user-dv8fs6ml5z]

great stuff

[@ZipSnipe]

Hey thanks for putting this video up. I want to mention that some chinese laser lights will not work with QLC+ . So I have 6-1 laser, it will not turn on at all with qlc+ but over in Freestyler(another dmx software) the laser turns on. Now I am using an older version of QLC+ because the new version does not work with Entec Open usb. Now my pars work perfectly in QLC+ , I have no clue why the laser won't come on in QLC+ . So apparently different software sends different data over the dmx cable which is baffling to me...then again these are free software so I guess you get what you pay for...lol

[@karlramsey8418]

Does this program have channel widgets like 16 32 channel etc? I’m getting a sheds 3d laser 3000 12/18 channel

[@LUDOMASSET]

Hello, thanks for your tuto. What kind of surface model you use ? Do you think a go is enought ? also you link your surface with an usb c to a cable ? regards

[@Voidwhereprohibited6]

So i have just a generic rgb fixture, and when i load it up it only gives me rgb sliders, but then red acts as the dimmer, and green is red, blue is green and then i have no blue at all. What am i doing wrong?

[@angelahirsch4659]

This was the perfect video for a beginner like me! Thank you. I have a question - is it possible to set a fade from one scene to the next? This would be for a church to go from one song to the next and I would like to fade out and in between songs instead of an abrupt change.

[@benrickett96]

Great video and super helpful. Thank you so much! Has really helped me just get started with my new moving heads and pars. Have you done any videos on the Show function in QLC? I’d really like to program something to music, but I’m struggling to get my head around the Show function, especially with the moving heads!! Thanks in advance :)

[@lokmanjl9272]

If using avolites titan and connect udmx usb can? Can u sharing

[@allanbateham874]

side question....did you make the pillars or buy them somewhere?

[@DJSKEEWUDR]

that open dmx box is 5pin, are you using something to convert to 3pin?

[@richardpowell4667]

This is the first video i saw on the QLC+. Great for getting started. So when you make a change 'on the fly' (around 33;00) can you save that as a new scene? Also, if you have your 'solo' widget buttons, can you have duplicate button outside the solo so you can stack your scenes? Great video. Thanks

[@pickypete0]

great video so now I ve made up my ,ind to DL this software. but is their a video to dl the drivers

[@Code_mov]

My dmx box was plug and play. I never had to download any drivers. It depends on your dmx interface

[@djknowt]

Hello, what model of Microsoft surface do you recommend?

[@Code_mov]

I have the surface pro 3. I’m not sure what the newest model is out now, but the surface computers are rather good.

[@djknowt]

@@Code_mov thanks

[@quimchii5917]

Help! My lights do not fade smoothly. It’s more of a steppy fade and I cannot find the reason why!

[@jhunn061]

will this work with Lightkey on a MAC?

[@djjax2641]

Hello. You mentioned that the moving heads will stay in the same position after a movement effect is running. Is there a way I can make it go back to default after I stop the movement effect?

[@Code_mov]

The only way I know of is to create a “home” function in a solo frame with your movement function. That way you Can just tap the button, and it will stop the movement pattern and return them home

[@Merdekah]

Wow such proness

[@thomasgriffin3474]

Have you thought about using onyx ?

[@Code_mov]

I haven’t tried it yet! I’m planning on firing that up some after I get some of my upcoming gigs completed

[@huynhquangloc5590]

God bless you

[@jaxondeneys7157]

Hi. when i try to make my EFX my moving heads tent to do whatever they want. Do you know why?

[@Code_mov]

Ensure your channels are correct.

[@jaxondeneys7157]

@@Code_mov Thanks! Figured out that when I created the profile for my movers, I accidentally put the sound active mode as a pan. I just brought an Enttec open Dmx USB as a saw you were using it and I'm super happy with it

[@bobolulu7615]

Damn qlc. It won't allow you to save and use your own manual fixture setups. 4.12.6 version

[@HansomWallis]

152 O'Conner Mission

[@I.Kerwin-y4t]

Schowalter Trail

[@RyanJohnson-u3g]

Berge Island

[@computerjantje]

a video of 40 minutes and yet every freaking detail I am searching for you send me to look up other youtube videos.

[@LewisMcNeely-f2i]

Ferry Dam

[@CharissaPulk-n8z]

Bruen Burgs

[@AlfredBraymiller-j4h]

Chelsea Highway

[@JohnathonTolar-k2c]

Rebekah Field

[@EvelineCornelia]

Lee David Hall Patricia Rodriguez Angela

[@budyddydowman8554]

Martinez Steven Hernandez Ruth Walker Edward

[@VicenteBarragan-l2z]

Lehner Ford

[@HuntingtonCora-c7j]

Lopez Laura Perez Patricia Lopez Dorothy

[@ThackerayJo]

Rodriguez Joseph Young David Anderson Carol

[@budyddydowman8554]

Walker Elizabeth Rodriguez George Gonzalez Karen

[@AliEkerci-p9b]

Lewis Mark Martin Kenneth Allen George

[@AliEkerci-p9b]

Smith Sandra Jackson Steven Jones Helen

[@KristaWalters-p2x]

Jones Donna Martinez George Moore Thomas

[@FrankBridgeman]

4722 Purdy Plaza

[@PowellNydia]

27376 Erich Ranch

[@lokmanjl9272]

If using avolites titan and connect udmx usb can? Can u sharing

[@GuntherAmy-l1e]

Taylor Robert Martin Brenda Gonzalez Christopher

[@GuntherAmy-l1e]

Lewis Linda Jones Charles Hall David