Umarex HDB Less Lethal How to: Quick Restrictor removal & East Coast Less Lethal Detents

[@RafaelFerreira-b9f]

From 🇵🇹 Portugal 🇵🇹 Advice.... When you want to remove the valve restrictor, before putting cutting pliers inside the chamber as you might have the misfortune of damaging something, first do this by slightly screwing a screw 🔩 to the restrictor because it is metal and then just pull the screw out with pliers and it will come out clinging to the restrictor

[@jamescdean9010]

Exactly what I was thinking. It looks like he butchered up the threading when trying to gouge out the restrictor.

[@123catz]

Yes I've done it with a screw a few times much easier..

[@runerebel8441]

Nice video and test Daniel. The trigger was sticky on mine when new also. After shooting a few shots it works great. Keep up the good work. Cheers from your friend in Norway😃

[@DK-Spencer]

@@runerebel8441 I didn't notice it till I put in the new detent but it went away after I shot the V3s

[@kylestalilonis7262]

Those are called circlip pliers removing circle clips often found on shaft in the end of a shaft to hold in bearing . Great video DK

[@DK-Spencer]

@@kylestalilonis7262 Ok, cool. Thanks and thanks!

[@DK_1983]

I feel like this is how hardball should be ^^

[@JohnVentarino-ey5ln]

You already have a bad ass LESHYI 2 for home defense nothing will beat that.

[@DK-Spencer]

@@JohnVentarino-ey5ln The Rattler .357 does 🤏😉😂

[@mpe777]

Great video brother. Have you tested it with HPA since you modded it.

[@DK-Spencer]

@@mpe777 kzbin.infoolJd6pc-K_g?feature=share

[@EastCoastLessLethal]

Great Job! Thanks so much. I’ll make more detents now👍👍👍

[@noobt4eguns]

@@EastCoastLessLethal i need

[@zer0divid3]

what is a detent..just thought it was brit slang til today

[@EastCoastLessLethal]

@@zer0divid3 you’ll see it in the video. It’s the rubber thing that prevents you projectiles from rolling down the barrel

[@zer0divid3]

@@EastCoastLessLethal I thought they were built in on all the umarex hd series... Pretty sure is on my hds, anyhow. Ty for the info tho!

[@slingshotwarrrior8105]

impressive, bro

[@DK-Spencer]

Thanks!!

[@THELESSLETHALSPOT]

Nice video.

[@DK-Spencer]

@@THELESSLETHALSPOT Could have been better, but thanks bro!

[@noobt4eguns]

Nice education video. Easier you to remove the valve block you need to screw a screw and you pull out but you did with your way nice😊. I need a detent but Gregorio Marra he don't ship to Cyprus. I will like to send me one detent unregistered shipping that cost almost nothing and i will pay you.

[@kylestalilonis7262]

Sorry second comment. The safety on the HDb is terrible I turned the safety off put a very small dab of super glue on the flush side never had another problem with trigger stick.

[@DK-Spencer]

@@kylestalilonis7262 They do suck, that's for sure

[@BigTaffy1]

Do you have a link for the restrictor? I'm looking to get around 280 fps for paintball.

[@DK-Spencer]

@@BigTaffy1 www.homedefence-24.com/en-us/products/powerkit-68-for-hdb68-exportventil-v2a-50j. It's in this kit

[@BigTaffy1]

Still having a hard time finding it

[@DK-Spencer]

@@BigTaffy1 www.homedefence-24.com/en-us/products/powerkit-68-for-hdb68-exportventil-v2a-50j

[@BigTaffy1]

@@DK-Spencer Thank you sir

[@charlesgreen5077]

I just got a HDS68 16 joule that functions well..shooting 3.7gn @345 FPS, but the trigger pull is really hard 12-18 lbs. Any ideas? I just bought a new HDB, hope the trigger is better on it. I will be powering it up to 30+ joules.Thanks for your help. Chas

[@DK-Spencer]

@@charlesgreen5077 Very odd, that's a lot of trigger pull, lol. Dang.

[@charlesgreen5077]

​@@DK-Spencer what size Phillips bit is used PH0,PH1 what size,thanks

[@Dizzydoesalot]

Do you think a screw extractor would work to remove the restrictor more easily

[@DK-Spencer]

@@Dizzydoesalot you can actually just take the valve off and do it from the other side easier

[@TheLosloco2001]

How many rounds do u get out of a co2 cartridge now after doing the mod?

[@DK-Spencer]

@@TheLosloco2001 You can finish the mag

[@DK-Spencer]

kzbin.info/www/bejne/bqacm5V3gKiXjLc

[@SpACeCruizeR2o3]

That's the pup right there can they run the shaped rounds yet

[@DK-Spencer]

@@SpACeCruizeR2o3 heck no, cause perfection is not an option in less lethal😂 they're always has to be some problem 😂😂😂

[@jamesmorgan3118]

Unfortunately that's a no go from how its designed

[@jamesmorgan3118]

I probably won't do it that way. I'll have to take all that apart anyway cause I have to install the pin

[@Formymandorian]

Ateeee

[@brr8888]

Is that home defense 24 co2 restrictor necessary?

[@DK-Spencer]

To really perform right, yes.

[@brr8888]

What could I expect if I just remove the valve block and use a 12 gram cartridge?

[@DK-Spencer]

@@brr8888 I'll show you in a bit

[@brr8888]

@@DK-Spencer Thanks bro

[@brr8888]

I have one coming tomorrow I was hoping I could just remove the valve block.

[@jamesmorgan3118]

Jewelry crafting pliers

[@Lessthanlethalbandit]

Do you have any rounds to sell DK they all look sold out on the shop website like to place a order

[@DK-Spencer]

@@Lessthanlethalbandit Not right now. Hoping to have a few posted soon though. We've been short on time to get any made and sorted lately. Sorry. We've got a few we've been using to do giveaways with purchases and hadn't really been able to get enough made up to actually do packs for a bit

[@Lessthanlethalbandit]

@@DK-Spencerthat’s ok when ever you get some made I will be sure to place an order love them rounds man the best in the business

[@whiteheatmarohn9827]

Amazon has a variety of .68 balls. I'm shooting rubber coated steel ball bearings in my Byrna.

[@DK-Spencer]

@@Lessthanlethalbandit Now We do for anyone looking dkspencercustomkinetics.com/shop/ols/products

[@airgunsanonymouslesslethal1904]

I have mine on hpa through the grip, via a hose, eight or eight fifty psi tank and double deleted. but my chromo has a red button so I don't know how many. How many do you think?

[@DK-Spencer]

@@airgunsanonymouslesslethal1904 kzbin.info/www/bejne/fIG4houJmbV7laMsi=M6BUAkl715DDo_6N That's restrictor removed and HD24 pin

[@airgunsanonymouslesslethal1904]

@@DK-Spencer 🙏Thank you! WOW! Woo hoo!!

[@SpACeCruizeR2o3]

See how he hooks us up hey i still gotta unbox the dk cannon im trying to make a chucky channel just cant find a good mask where the mouth moves and the lil pale hand gloves those are hard to find DK for president ​@airgunsanonymouslesslethal1904

[@SpACeCruizeR2o3]

Them dum azz detents smh u think they would use magnet bearings from sikorskys in Stratford ct my granny used to work there long story short my mom had a hoopty car with a hole in the floor we would on her way to the methadone clinic nodding out we would toss the ball bearings out on the highway of course when no cars were around

[@airgunsanonymouslesslethal1904]

Yeah Buddy! ;-]

[@Formymandorian]

Ayeeee

[@charlesgreen5077]

That is a Snap Ring Plier

[@DK-Spencer]

@@charlesgreen5077 Actually, they are not really. These are jewelry making pliers. Similar but not the same

[@scoottheharbor]

Looked like you were butchering it to me.

[@DK-Spencer]

Like I said in the video, it was sloppy. It has been a long time since I did one of these, forgot that the restrictor is harder to get out than most of the other stuff, lol. I'm a VKS/FSC/TCP/TCR/Patrol Carbine guy first and foremost, I only have done 3 of these, ever, counting this one. The point was testing it with the new detents and factory pin, not to be instructional or smooth. I'm lucky I didn't butcher the threads for sure

[@brr8888]

That would remove an intruder for sure

[@truth.tactical5580]

Member when these first came out bro i showed you what 1100 put put does hate to say it not many launchers out there that can be so powerful with minimal mods

[@DK-Spencer]

@@truth.tactical5580 Seem to be pretty reliable too