DJI Agras T10 | What To Know

Рет қаралды 20,899

Күн бұрын

Пікірлер: 11

@kdavis5460 Жыл бұрын

I bought the DJI Agras T10 for fungicide spraying on our vineyard. The main reason we bought it was to assist in hillside spraying because it is very difficult to do backpack spraying on a 35 Deg slope. The T10 was to be our saving grace. It has not been. Unfortunately, mapping and autonomous flying does not work when your slopes are more than about 15 Degrees. The onboard radar continuously alerts and stops the T 10 when it senses the horizontal portions of our hillside. It is impossible to fly it low enough to where the radar doesn’t pick up the hillside. Flying too high and the fungicide evaporates before contact. Had we known any of this before,we would not have purchased the drone. Too late now. Fun, drone to fly, but only on flatland with gentle slopes. Also, the rapid charger only works if you’re plugged into 240v. If the charger is plugged into 110v plan on about 25 to 30 minute charge time.

@duuurs 3 жыл бұрын

This is such a great move to be able to use it under part 107

@ryandavidson3568 7 ай бұрын

Anyone got any experience with the T10 spreader? I am having massive issues trying to get it to work.

@KirkDickinson 2 жыл бұрын

We have 1000's of acres and there are areas that have invasive bushes. Autumn Olive, Multifloral Rose, etc... We poison some with a tank on an ATV and then run the brush hog over them after they die. I was wondering if the would be some way to use a drone like this to spot kill these bushes. This drone seems to spay to cover a wide area and isn't really set up to spot apply. I envision flying a smaller cheaper drone for a site survey, then marking all the bushes that need to be killed. Then uploading the "kill-list" to the T10. Send it out and have it drop down right to the bush and apply a preset amount of herbicide directly to center of mass, then move on to the next bush. I don't want to kill grass, clover, and beneficial plants, only certain bushes. Is this possible?