DJI FPV Goggle DigiView Video OUT Tutorial 🎓

[@AlbertKimTV]

If anyone knows what the minimal hardware requirements are for this to work please reply to this comment. 4GB RAM perhaps?

[@tschengtscheng805]

I was about to suggest running this on a RaspberryPi zero w connected to the googles and streaming it to spectator's smartphones. But 4GB RAM would be way to much for this..

[@viciousavacado4941]

Awesome I just got my first vista unit yesterday so now a few of my buddies can actually watch

[@TheTwisTftw]

You just made me some money so you truly deserve the tip ! Thank you 😆

[@TheTwisTftw]

@@mxracingunlimitedltd7784 i have dji googles v1 and i am not flying avata

[@thesoobz619]

Clear and concise. What we need! Thanks mate

[@AlbertKimTV]

Glad it helped, thanks for watching.

[@CarbonGlassMan]

I don't know anyone who flies so I didn't see a need for this, but several people at work are getting curious about what I'm doing on my lunch break so I can show them now I guess if they want to see. Maybe I can get someone to get into the hobby.

[@AlbertKimTV]

😎

[@오이닝-f2i]

Thank you so much for the good video. Thanks to your information, we have confirmed that the video is transmitted in real time without the most delay. Once again, I would like to thank you. I left a comment because I was curious about something. By performing this method, we confirmed that the video is transmitted in real time. Is it possible for a drone to be transmitted without cutting off the video transmission while flying?

[@MCsCreations]

Awesome, Albert! Thanks a lot! 😊 Stay safe there with your family! 🖖😊

[@AlbertKimTV]

Thanks, you too!

[@Amelieofficial930]

Please help! I can't get my v2 goggles to show within the Zagdig installer drop down for a bulk upload. The installer reads '0 devices found'. My goggles are set to 25mW and have 'Auto temp control' set to off. My controller, goggles and quad are powered up, and my goggles are then connected to my pc using 'usb c to usb c'. I've tried 2x cables; 'usb c to usb c' & 'usb to usb c', and my goggles are visible within the dji assistant app using both cables. What am I missing please? Thanks in advance. Ps. I'll def be donating to the producer once I'm up and running! Great work guys!!!

[@AlbertKimTV]

Head over to the Discord server. Someone over there might know.

[@ThrunRC]

That's so awesome, many thanks for sharing this 😁👌👌👌

[@PatrickGuerrisi]

Thanks man. I already owned a DJI crystal Sky ultra for my Mavic. Would the video out work on that?

[@AlbertKimTV]

No, this only works for the DJI FPV goggles V1 and V2.

[@PatrickGuerrisi]

@@AlbertKimTV no I mean can you use video out from the Goggles V1 or V2 to a crystal Sky? You mentioned you could do it with the smart controller? Crystal sky has

[@ToddtheLoneDroner]

@@PatrickGuerrisi it has to run Windows

[@PatrickGuerrisi]

@@ToddtheLoneDroner Not talking about that. You mentioned you could do this with the smart controller right? But it's expensive... How does it work with the smart controller?

[@ChrisMixtle]

@@PatrickGuerrisi hi Patrick, someone told me “the CristalSky is Android 5, this need Android 7 or more”. Im ask the same question, like you. Saludos!

[@mooredge]

I love it. Thanks Albert.

[@dannyfpv123]

Thank you my good sir! Straight to the point; just what we like 👍

[@AlbertKimTV]

😎

[@tango_sierra8608]

awesome video. got it working on the newest macbook air too! the macbook air via terminal app is actually the lowest latency or lag ive noticed so far weirdly. i found the PC version has like 2-3sec lag but my mac with M1 chip is like about 1sec or less. going to buy a cheap android phone just to try this too!

[@aaretaler]

How do you get it work on the macbook?

[@mariotc777]

@@aaretaler same question here…

[@dangerous8333]

Fyi, All PC's are different and will perform differently. Some will perform worse than a Mac, and some will slaughter a Mac. What you're saying might be true, but it's still completely subjective.

[@princesfpvdrones]

Wow! this is awesome!!

[@chrismillersrcfamily]

Awesome.thanks for sharing 👍🏼

[@AlbertKimTV]

My pleasure

[@lordango]

Really exciting news! But what's the purpose?

[@AlbertKimTV]

Allows for spectators to watch you fly and see what you're seeing with a slight bit of latency. You had to buy the $750 DJI Smart Controller to be able to do this before this came out.

[@lordango]

@@AlbertKimTV awesome! I heard that an android app is currently in development. That would be more portable compared to bringing a laptop in the field.

[@purpleAiPEy]

@@bertbeinaaf8314 anyone can view during the flight. It's great for business where someone needs to direct you somewhere. Also, to let someone experience flying without having to go horizon mode VLOS or stay close by, this is great for practice and teaching. All while being free as long as you own a laptop, no need for an external monitor.

[@hrhodes2768]

they literally just greatly improved the latency with changed to the encoder lol

[@AlbertKimTV]

what does this mean?

[@bhammy1874]

Super fast now, super low latency with the latest update

[@josefdahari]

@@AlbertKimTV if you go check the discord they gave an update for the new code. So less latency

[@Landat78]

@@josefdahari how can i install the new update?

[@assassin1a1]

Do the goggles themselves still show the image as normal? In other words, could I fly normally (wearing the goggles) and have it simultaneously display for spectators on another device?

[@AlbertKimTV]

Yes, the function of the goggles is unaffected and you can use them the same as before. This software just taps into the video feed that was always there and you just never used it.

[@alexanderalexandrov4696]

Hey! Is it possible to watch videos from DJI Goggle v1 on Android phones? Thank you.

[@AlbertKimTV]

instagram.com/p/CO3o6XDDK7G/

[@richardlyder8415]

New launch command out to help with lag. I would say it's down to about 1/2 second

[@nicolalego]

It works with the DJI FPV Drone too?

[@AlbertKimTV]

I'm pretty sure that it won't but I have no way to test it.

[@Sircleanfpv]

Nice, one more reason to buy dji for me now. I hope there will be a mobile version so you don't have to carry a laptop around

[@AlbertKimTV]

I hear an Android version is in the works. Output to my phone would be awesome!

[@Sircleanfpv]

@@AlbertKimTV nice, just need to save up all the money to get it 😂

[@vandy7588]

@@Sircleanfpv You could also theoretically run the program on a Raspberry pi if the program supports linux, then you can have a little box that you can plug it into any display.

[@ThreePilotsFPV]

Thought this was easy , my comp wants to know what program is needed to open it

[@AlbertKimTV]

Link in the description

[@anfrae25]

Hey Albert on one computer when trying to run voc or hybrid it just flashed and nothing happened I tried a few things like turning off security still nothing on the computer or the app. Now I tried a different computer and there are no drivers to install In zadig next to driver it says (none). Any ideas?

[@AlbertKimTV]

Not sure... probably some kind of PC issue. So far working on all my devices without any problems. Also, check the discord link. There's people there that might be able to help. You'll probably want to include more specific information about your devices since those guys will ask.

[@natelarsen9466]

Bought the dji fpv drone, v2 googles, controller but when I checked the output (vtx), its stuck at 25 mw. I am in the usa, so thought it would default to 700 mw. Any solution to resolve this? Any help would be highly appreicated.

[@AlbertKimTV]

Sorry, no clue here. I don't have that equipment. Maybe it's not activated?

[@trevorimpulsebuyguy6398]

Do not own any DJI products but still 👍

[@FilipeSilvaStudios]

Is it possible to have this running on OBS without resolution lost?

[@AlbertKimTV]

I'm not sure what this means.

[@FilipeSilvaStudios]

@@AlbertKimTV I'm looking for a way to connect dji fpv drone video into OBS (open broadcast software), to be able to use it on a live stream production. So I meant do you know if obs recognizes this app, or if you can full screen it to capture the whole screen?

[@KwongKan]

One question: can you OBS that feed?

[@fpvision_net]

I haven't tried yet but I would assume you could

[@AlbertKimTV]

I haven't tried yet but it probably will work.

[@tch3rry1]

I’m wait on the v2 tx to work with the air unit now🙏

[@bobg1443]

Ok, but will it work while you’re flying?

[@AlbertKimTV]

Yes, I don't see any reason it wouldn't as long as you're flying through the goggle feed and not the USB-C out which has a lot of latency.

[@reinoutwijnholds3347]

You can change the power back to above 25mw after connecting right?

[@AlbertKimTV]

The power can be whatever you want (you should be using a fan to cool the air unit). The auto temp control has to be OFF regardless of the power setting or you just get a black screen.

[@MrHauf85]

every fpv youtube guy hafto release a video about this =)

[@AlbertKimTV]

absolutely! this is important news!

[@davidcanole3758]

They are…

[@DaytonaJim78]

Awesome

[@vannafpv6783]

My zadig abort the driver installation.. any idea why ?? (already try 4 times with different usb cables, restart all the process), nothing !! it keeps aborting the drivers installation, no clue why!

[@AlbertKimTV]

Hit up the Discord server... someone over there will probably know.

[@vannafpv6783]

@@AlbertKimTV Thanks!!! and by the way .. YOU ROCK ALBERT !!! thanks for everything you do!!! I owe you a lot !

[@magmag1458]

How dji mini 4 pro clean hdmi out?

[@QuintenC]

Now I wait for a tablet version.

[@AlbertKimTV]

Android version coming...

[@QuintenC]

@@AlbertKimTV what about iPad?

[@gaigebobbitt8152]

I'm following the instructions, when I run the hybrid command nothing happens not even an error.???

[@AlbertKimTV]

I don't know what the hybrid command is... a new feature perhaps?

[@EthanMitchell_YouTube]

Hey Albert, the links are not working.

[@AlbertKimTV]

sorry... should be fixed now

[@Ptorpong]

Does it also output an AV from annalog module?

[@AlbertKimTV]

I have not tried that.

[@bootboys7745]

Is there a way to video out in analog mode ?

[@AlbertKimTV]

I don't think it will be possible

[@EthanMitchell_YouTube]

Is this available for Mac?

[@EthanMitchell_YouTube]

Nvm, found the Mac instructions

[@Innercynic]

@@EthanMitchell_KZbin Where did you find the mac instructions?

[@EthanMitchell_YouTube]

these instructions worked but the only issue I had was when putting in the command to download the voc-poc scrips from github, it was denied access. I just went to the github link and downloaded the zip, unzipped and put the whole folder on the desktop. Then followed the directions again, jujst changning the terminal directory to the location of the voc-poc script folder. It works like a chram. Let me know if you need help.

[@EthanMitchell_YouTube]

@@Innercynic if you can’t see links in my other reply’s just hit me up in the comments on my channel.

[@Innercynic]

@@EthanMitchell_KZbin Works great, thanks mate!

[@seesea9614]

come on，Raspberry Pi

[@Dorodigital]

ummm and how exactly do you turn off the auto temp feature on the QUAD???

[@AlbertKimTV]

You do it in the goggle settings. It's under device info -> power limit. You can read about it on page 28 of the goggle manual. dl.djicdn.com/downloads/DJI_Digital_FPV_System/20190731/DJI_Digital_FPV_System_User_Manual_EN.pdf

[@Dorodigital]

Thanks Albert for your prompt response I found it and it did works . thanks again

[@W1rbel]

what about linux?

[@AlbertKimTV]

I don't know. You'll have to ask the developers about that. Links in the description.

[@ztagrc206]

working with the FPV Out Club devs, we got live stream working via UDP packets to OBS: kzbin.info/www/bejne/farSl41srp2Kors

[@selvacinema4241]

Does this still work? With V2 on vista firmware 01.00.0608

[@AlbertKimTV]

It should but I don't have those goggles, just the V1's.

[@larsulrich3356]

I don't need AXIS flying anymore?

[@AlbertKimTV]

This came out BEFORE the axisflying box.

[@larsulrich3356]

Yeah I noticed with the time released information on the video. What would you recommend?@@AlbertKimTV

[@davidcanole3758]

I’m not getting pipe….

[@AlbertKimTV]

Hit up the people on the Discord server.

[@ToddtheLoneDroner]

Not many people are going to have a Windows computer and even if they did that the outside and the sun and it would never be bright enough

[@AlbertKimTV]

Android version is out now

[@Pe5jJ9]

Does this work with Avata and Goggles V2, anyone?

[@AlbertKimTV]

No, it doesn't

[@its_Savian]

sucks! that i bought the dji fpv goggles V2 for no reason!

[@MOEMUGGY]

Why? They've fixed the bind issue weeks ago. Or are you really an analog guy, and you're just here to throw shade?

[@davidcanole3758]

We’ll learn to use…get out of you cave…

[@mulliganfpv2332]

Video looks super lagging

[@AlbertKimTV]

It's not meant for flying and they've just released some new code for less latency.

[@Landat78]

@@AlbertKimTV how can i setup install that new code?

[@battano]

Still analog because I just dont trust DJi who makes a digital system with no digital out.

[@MOEMUGGY]

Yeah, that's the reason you're still analog. 🤣

[@mrb2917]

your loss, DJI FPV is insanely good

[@battano]

@@mrb2917 I have to have digital out more than 90% of my flying is not done with goggles strapped to my face.

[@davidcanole3758]

@@battano that makes no sense

[@battano]

@@davidcanole3758 Not sure what you dont understand. I dont use goggles for my video or audio feed. I sit on my couch in my living room while I fly my micros out front and around my place. You can rotorbuilds search my name to see some of my micros.