DJI FPV Goggles V2 FCC & 1200mw Hack - Complete How-To For V1,V2, Caddx Vista & DJI Air Unit.

[@JoshuaBardwell]

For what it's worth, there is a day-1 firmware update for the V2 goggles that is waiting for the new DJI drone to release. Pre-testers are already using these firmwares, but any information about them is currently under NDA. The good news is, I can confirm that I was able to flash back to 0604 from my pre-release (post-0604) firmware. So if any important features are removed, it may be possible to restore them if you are willing to stay on older firmware. In fact, I kind of screwed myself over as there is currently no public way to flash from 0604 forward to the pre-release firmwares, so my v2 goggles were no longer usable with the un-released drone. Oops.

[@MadRC]

Hay man, nice to see you here, I am honoured. Been there before with prerelease firmware and DJI, care is always needed as a brick is only a click away sometimes lol. I'm not involved in beta testing or helping to admin the Official facebook groups now as I stepped away so won’t be involved in this release now or able to test these things my self until I’m actually able to buy it my self, god knowns when that will be in the UK sadly. It’s certainly not beyond the realms of possibility DJI would change something that affects FPV users intentionally or not so that's why I put the warning in. been there too many times in the passed with other products as DJI does not do a lot of looking backward and as I suspect we both know this is priority right now. I’m not saying the standalone FPV is obsolete or not being developed but for FPV users sitting where you are right now is a safe bet. The fact there is downgrade is good and thanks for confirming that. I’m really looking forward to your thoughts when this thing lands as I know you will give a good honest view from your perspective. I hope you and yours is staying safe in this madness we all find our selves in. Ian.

[@rj_travelnchill]

Hey Joshua! awesome video. So I was trying to select the files for the FCC hack but it says I need to request for it on google. Would you possibly grant me access. Also I have a Mac. Thank you!

[@acarp4766]

does 1.00.0606 still work with 1000 and 1200 mw for the v2's?

[@richarchdale6522]

Hey Joshua Bardwell! I've been trying to figure out how to get in touch with you for a few days now, ( didn't want to just do a comment) but here I am. This hack for the 1200mw will this work on the dji fpv drone? I live in the US. And this is my first fpv drone. Ive noticed I don't get the best signal around things. But doing this with the goggles will it work for the drone?

[@Roblamont1]

@@acarp4766 mine doesnt

[@FLEXZICAN]

For others who are wondering like me. PSA: if your goggles are in 50mbps mode the amount of channels will go from 8 to 4 because you are using double the bandwidth (this video is made based on 25mbps). Great video mate, always come back here for a refresher course.

[@sargeantsalt9081]

Where can i change 50mbps to 25 in the goggles v2?

[@horatio321]

This guide works fine - thank you! Heads-up: As of February 2022, with a UK purchased set of DJI V2 goggles, registered and updated to the latest version of the software, the steps in this video work EXACTLY as described. I think users are naming their files incorrectly. The files written in notepad will automatically be given the extension .txt - your file names should be: naco (for the air unit/vista) naco_pwr (for the goggles) If you inadvertently name either or both the files with .txt in the title, it won't work. This might make some users automatically go down the route of rolling back to earlier versions of firmware, which can cause a degrade in functionality. The latest versions of the firmware work, no problem.

[@SantiagoVelezRestrepo]

Thanks mate, i just got mine and have this doubt! Thanks a lot!

[@horatio321]

@@SantiagoVelezRestrepo Cheers! It's very easily over-looked. The rumour that the latest firmware somehow prevents this process from working is nonsense. The guide above (whilst long-winded) is exactly how to do it and works like a charm. If you want Betaflight OSD in the goggles AND more importantly - the system to operate in full power mode when the quad is armed - don't forget to open the relevant MSP port in Betaflight Confugurator for the UART that your Tx/Rx connections from Air unit/Vista and your flight controller are connected to. To do this, on the ports page, switch on MSP under the Configuration/MSP - no need to mess with the other drop downs. Joshua Bardwell has an excellent video on the subject: "DJI very short range? Your MSP connection might be why. In my case, on my Iflight Succex TwinG F7 4 in 1 stack, there's a plug onto the FC and it wasn't clear what UART it was connected to. Turns out, it was UART 2. :D

[@SantiagoVelezRestrepo]

@@horatio321 perfect explanation! Thanks a lot for that, one question, do you recommend always put the RF signal in 1200mw, or just for long range, 250 or.700 is enough? Same with TBS micro tx v2, (i have crossfire) is good to turn on always the 1W or 250 or 500mw is enough? Thanks again mate!

[@horatio321]

@@SantiagoVelezRestrepo I think there is a strong case for setting the power according to your usage/conditions. If you fly where there are obstructions, or if you intend to do very long range flights, you need the higher power settings. The down side to higher power settings is increased heat and battery consumption. My TBS module sucks the Tx battery at full power. So if I'm staying fairly close, I use the lower power settings.

[@SantiagoVelezRestrepo]

@@horatio321 Thanks a lot mate!! I really appreciate that, cheers from Colombia

[@wakkaflakkadown]

After a break I always find myself back here for a refresher on setting up some part of my DJI gear to get the most out of it. For clarity you're hard to beat, mate. Cheers!

[@michaelmatthews6421]

This is the easiest to follow video I've seen on this. Great job explaining everything

[@alanshearing7515]

Thank you so much for making this video, I have now set up 2 Drones . As a newbie invaluable knowledge. Both Drones came locked with 25mw .

[@MadRC]

Thanks man.

[@dubsrcfpvandfamilyfuntimes913]

Just did the hack tonight finally after thinking about doing it for 6months I finally did it! Thanks for the video show me how to! I can wait to go try my drones and see the difference! Thanks again much appreciated!

[@MadRC]

Enjoy

[@MartFPV]

Thanks! It works 100% for me, I just bought my Goggles V2 and updated to te latest firmware. I am in the Netherlands. Keep up the good work!

[@EXTRA300s]

WATCH OUT! Since a few days, DJI is rolling out a new update, or requests to downgrade to a different version of the firmware. This ensures that you can no longer hack, or perform software manipulations yourself! kzbin.info/www/bejne/aajHknx8mNB0d9k

[@petebuttons210]

Thank you for adding so much value to the DJI FPV community. It has helped me a lot.

[@miller7123]

This is the video I was waiting for! Thank you!

[@diamondcity7512]

Best unlock video for dji goggles on youtube mate 👍

[@samavella8831]

Hi, Just a quick comment. One thing that I was struggling with is after doing everything correctly I could not figure out for the life of me why I was still getting only 4 Channels even though I was able to change the power to 1200mw. It was only after reading one of the comments from another of your subscribers that I found out that if my transmission rate is set to 50mbs the number of channels is reduces to half, which is what I was getting. It makes total sense, but if you’re not familiar with the system it is easy to miss. I was just wondering if it would be worth your while yo do a quick update to explain this! Just a thought!

[@felixstoerkle]

Bro thanks had the same Problem!

[@tubamanandy2]

Just done both hacks on a V1 Goggle & Air Unit with very latest firmware and everything worked a treat first time ! Thanks for this excellent video

[@far_zenith]

Thanks for the vid. Quick note - the files still have to have .txt at the end of them. Your OS hides the .txt so it doesn't show, but if people have always show extensions turned on they will have to make sure to keep the .txt in their file name.

[@angrypepper3325]

Hey Ian fantastic tutorial, you and J.B. are the two I go to for honest straight forward advice, and very understandable, thanks so much, please don’t stop doing what you do.

[@MadRC]

Thanks man I really appreciate the kind words.

[@wackyack3165]

Clearly explained and easy to follow video - even for a numpty like me - many thanks.

[@CarlosRodriguez-vg2ob]

Hi I’m from the future and we now have the goggles 2 and while there is a fcc hack for the 03, is there one that can be used on the vista and the goggles 2 instead of the goggles V2?😮😮

[@samriley3229]

Thanks a million for this great video - really well explained. An FYI for Mac users out there - I struggled to get this working. I followed all the steps in the right order but no joy - however I was unmounting the Caddx Vista after installing the naco.txt file. This seemed to negate the process somehow. Once I installed the file and just pulled the USB out without unmounting it everything worked a treat. Not sure if that's a quirk of my particular Mac system but just in case that helps anyone struggling with a Mac. Thanks again!

[@garychanchan]

i too couldnt get this working b/c of Mac but he mentions in the video its something to do with the Mac Text Editor so you have to download his TXT file from the description. That ended up working for me. First video explaining the Mac Issue with this hack.

[@uasflightops3410]

@@garychanchan I cant get my Mac to see the vista when I plug it in how did you manage it please?

[@garychanchan]

@@uasflightops3410 Try different USB cord. Make sure you launch DJI FPV app, power on drone with Lipo, then plug in the vista.

[@gf999]

Hi, for me works perfectly fine. I use my DJI Air Unit (latest firmware) with DJI Goggles V2 (latest firmware) in the middle of Europe ;) I followed instruction - uploaded one file to air unit (it allowed 700mW), after that I uploaded second file to goggles - it allowed 1200mW. Next week will check how much difference will be between 25mW and 1200mW - my goal is to get higher quality behind obstruction. Best regards

[@koenverschuere]

I'm still not able to solve the problem on my FPV. Can you specify the firmware version of the air unit? Did you buy the FPV in Europe / CE zone? can I contact you by email? [e-mail]?

[@tomekb7988]

siema mam drona fpv i v2 gogle. Musze wrzucic dwa pliki jeden naco na karte drona, drugi naco_pwr na karte od gogli czy tylko na karte od gogli wystarczy?

[@jorisfilms]

still works in 2022! thank you so much!!

[@josefdahari]

Thanks for doing this video seems your the only one doing v2 videos so it's much appreciated!! I tried the power hack it didn't take I need to try again. And also I can't seem to get the goggles on the newest .64 firmware but that's another story lol

[@josefdahari]

Nevermind it works. I had to do a reset all on my goggles first and then do it.

[@MadRC]

Great news.

[@josefdahari]

@@MadRC thanks so much brother much appreciated for all your work

[@jasoncarothers7531]

Can you take the SD card out of the goggles so you can use the DVR Function while also in “FCC” mode; or do you have to leave the SD card in at all times now?

[@matinik_fpv]

Following

[@imightturngreen]

Following

[@pietroseven8228]

Finally I got a success, important is to have the same latest versions in caddx vista and in the goggles and than it works. I have to try now video out to smart phone!

[@donniewoodley8604]

works great! just purchased v2 goggles a few days ago and what an upgrade over my budget analog set up. i mostly fly around the yard so 1200 mw i dont really need but its there when i need it. plus having more options than just 25 or 700 is nice too.

[@_test_test]

do u updated? ive just bought v2s and it goes updated to, i guess, 1.0.7. do it still works?

[@vogulz]

Great video but I have some thoughts and questions. If you can write to the internal storage of the CADDX, why not the DJI Air Unit? Do I have to permanently leave the SD card with the hack on it inside the air unit at all times now? Just mildly inconvenient considering I have multiple quads with the DJI air unit and not enough micro SD's. Same with the goggles, sheesh.

[@cesargurc911]

hello, I have already done everything explained in the video and it has not worked for me neither in the glasses nor in the cadxx view that could be I have the v2 and version 606, when I connect the drone to the lipo and turn on the googles it does not let me accessing the menu only gives me the image will they have any defect?

[@jordigrau3625]

Excellent. Just tested on V2 google. Thank you very much.

[@devilcfpv2621]

Question, it has been years since i did this to my original v2 goggles. But i recently bought a new pair of the same V2 goggles as a back up pair. But what i am wanting is the same functionality that i have on my current every day drivers which is the 1200mw hack. I dont want to turn these new ones on & update it the wrong way & not be able to have these abilities. I would prefer to have the same firmware on these to with dji getting banned i want to go ahead and have this done on the off chance i wont be able to due to the bann

[@ktcarvalho]

Valeu!

[@SemostevMedia]

How do I know the best channel out of the 8 channels on the google. Which is best to use?

[@JPTulo]

I used the file you provided for 1200mw on my Mac, but now I only have 3 channels instead of the 8 I had before?!

[@timcable]

same here - am NO 50 mbps

[@JPTulo]

@@timcable when I switch back to 25mbps it goes back to 8 channels.

[@Glenn.J]

Is the range going to be the same regardless if you are 4 or 8 channels but are able to go upto 1200mW? Or for max range do we go the FCC route (8 channels) and 1200?

[@LukeMaximoBell1]

Thanks! Will the Vista automatically output 700mw? Or do you need to choose the power output from the air unit in the goggles?

[@MadRC]

You should check it as it could be set to 25mw regardless. The vista works slightly different to the dji air unit in lower power mode too.

[@alefpvc.r.4540]

Just tried this on brand new V2s and it worked perfectly. Thanks a lot! ..... just gotta wait for this rain to stop to go out and test it :|

[@MadRC]

Cool and Congrats I hope the flight went well.

[@waynependrigh4669]

What a great video. Clear, logical and decisive. Thank you for your work. Appreciated.

[@bigbino9663]

Still works perfectly, thank you 👍

[@bender8783]

Exactly what i was looking for. Thank you so much and keep up the great work.

[@jasonleesuffolk]

Hi,how do you turn down the mw power setting on the dji goggles v2 ? I need to turn all settings to the lowest output so as its not interfering with my friends analog signal

[@chriscflint]

Ian I have a question regarding V1 and V2 goggles. I have just bought a set of V2 as I (erroneously) thought they had HDMI out and in, as I wanted to use them with my Air 2 S and RC Pro controller, anyway that is now another problem for later. What I would like to know is how to be able to use both sets of goggles from a single air unit (me flying) so I can let spectators watch the flight with the other set. Do you perhaps know what I need to do as I note that you can only bind one set of goggles to one air unit at a time. Your help is appreciated.

[@Hanjo_m]

Hello I have the DJI V2 mask I followed the hack well but I only have 4 channels.. but in my settings I can go up to 1200 wm. Does the hack still work? thank you for your return

[@soothsayerfpv6835]

I’m in the US had no problems with my unit but for my VISTA. I have channels 1,2,3,8 but no channels 1-8?

[@sattyc9916]

Amazing video my friend.Exactly what I was looking for. I did the upgrade just fine. My screen in the goggles shows the 50MBPS . However my transmission lost connection now. It binds and then 10 seconds later goes from green to red. Why is that? Please help . Assoon As I saw the 50MBPS I was so happy but I cannot do any test flights because it won't connect with my Dji remote now. 😢

[@MadRC]

I would just reset and rebind everything.

[@sattyc9916]

@@MadRC Thank you for your reply Sir. I did that literally 4 times now. After resetting I finally see 4 channels 4th one being public but assoon as I assign another channel , I lose controller signal on the Dji remote. light goes red. but the drone doesn't beep even though it is supposed to after signal lose. what am I doing wrong??

[@jsxgmanfam]

I did all you said in the video and thank you! one question.... why is it when I switch to 50mbs mode I loose all channels but the original 1,2,3, and public 8? For a moment it will show both channel 6 and channel 8 chosen at the same time. Then when I switch the channel i only get 1,2,3.

[@rrenatosouza]

it happens with me too

[@PaddyMack]

Im a MAC user and so is everyone I know. Thanks for the files! You’re the man 👊🏻

[@palermodrone7240]

Hi I have followed the procedure to switch to FCC several times, I see the power up to 1200mw in the menu, but I always have 3 channels if I switch to 50mbs mode. If instead I do 25mbps then I have 8 channels. Am I wrong something?

[@MadRC]

No that’s correct. 50Mbps mode has less channels as it’s using over double the bandwidth.

[@palermodrone7240]

@@MadRC Thanks a lot for the answer. How do you think it is preferable to fly? 25 or 50?

[@MadRC]

50 will give better overall image but 25 will be better range.

[@palermodrone7240]

@@MadRC Perfect! Thanks.

[@Freebird_67]

@@MadRC I was wondering why AndyRc was flying his planes on 25mbs and not 50mbs. Now I know! 25mbs did seem to work better for him and I saw very little loss when his plane was a good distance out he was staying at 25mbs at good range. I been using 50mbs for my planes and range is ok but drops for 50mbs to 10 to 18mbs or lower pretty quickly.

[@RaphaelFriedrich-ou5sj]

hello please help I live in Austria and I think the dji goggles knows where i live and I am not able to change any settings inside my glasses at all. Does the hack still work with the latest update? And do I just have to put the sd card in the goggles and its finished or does this unlock more settings in the goggles because the look in the goggles looks a way diffrent know with the latest update. I am not that long in the Fpv game so please help me :)

[@wenquanzhang6377]

The video makes a lot of sense. There is a question about whether after unlocking FCC, do I need to keep the file on the SD card all the time or activate it once can open it permanently.

[@MadRC]

Once done it will remain unlocked unless you connect it to assistant 2

[@wenquanzhang6377]

@@MadRC assistant 2 you means official DJI application?My drone is dji fpv.Already unlocked FCC on the drone

[@ror-ys3qp]

why? vista with 606 does not remember the default ch I had set. it boots up in ch8...thanks

[@maverick7_aut]

I am a bit confused. I have put my DJI FPV drone into fcc mode via dh companion app. Do i still need to configure the v2 googles to 1200mw output via the naco_pwr file in order to get the max transmission range?

[@MadRC]

No the Naco files are for the FPV system only. The only hack for the Drone and V2 goggles is the FCC App.

[@maverick7_aut]

@@MadRC many thanks for your swift reply. All the best!

[@directorscut4707]

Worked perfectly and simple! Thanks!

[@charlybravo]

Can you send me the firmwares to do this ? DJI already is hidding this old versions in their website

[@baggszilla]

Quick question. If I haven't had an SD card in my goggles yet, should I place the new SD card in the goggles first to format the SD card then take it out of the goggles place it in the SD card reader on my computer then do the naco_pwr hack?

[@MadRC]

That’s the best way but normal for should should work.

[@HillmanSasono]

I tried with my goggle v2 and entering FPV system. It's locked I can't change it. What should I do?

[@chedil08]

Hi, great tutorial. As you said the remote will follow, will this then be compatible with wtf os? Thanks

[@MrLeeroyfpv]

you sir are a legend worked first time many thanks so well explained swell

[@johnhoover1982]

Fast forward to 2023. Do I still need to do the FCC hack on the vista air unit? Currently put the heck on the DJI goggles 2 . Is that enough or does it need to go on the vista to ? And what file do I use for the vista and avata ? The naco one ? Thank you

[@propellerperspectives]

Were you able to find out anything on this?

[@MadeInChinaCalv]

Thanks! Works perfectly on my Caddx Vista and V2 Goggles!

[@jacobsir5579]

I plug in my vista and power it up... but my pc doesn’t recognize it? The dji assistant works and I’m able to update the vista unit... but my pc doesn’t see it as another drive? Any ideas?

[@MadRC]

I had to do mine a few times, make sure assistant is closed and then unplug and plug with the vista turn on

[@jacobsir5579]

@@MadRC I had to do it several times before I finally powered up my Vista FISRT, then I plugged it into my PC and finally it recognized! I also have the DJI assistant closed to avoid any communication issues. Thank you for the hack information!

[@skokkinos71]

Is there an fcc hack for dji fpv drone? Also does it make any sense to make the v2 1200mw when is connected to dji fpv drone? Is it making a diffrence

[@TurboHeart]

also looking for this

[@gimbalair]

Do you need to leave the sd card in the goggles when using the naco_pwr setting? Is there a particular channel which if more favourable around domestic properties, ie wifi etc as even at 100yds I see Ch1 change to red bars at 700mW. Thanks

[@MadRC]

No you can remove the card once done. The mod will only reset if you update the firmware or connect to assistant 2.

[@gimbalair]

@@MadRC Thanks. I added the caddx 15cm antenna, added the sd card with the nacho_pwr txt file and sadly I got no improvement in video feed, I still get pixilation at no real distance (100m?)

[@QuickSticks8771]

I'm trying this in an original air unit and the sd card won't grab on and keeps popping out . any tips ??

[@2BitGamers]

I need help badly. Im in the US but when I'm in the goggle's setting mode it shows 8 channels under "Player" but in settings most of the options are greyed out including the power which is greyed out on 25

[@acarp4766]

does 1.00.0606 still work with 1000 and 1200 mw for the v2's?

[@charlybravo]

GOOD QUESTION

[@Rspence_86]

Any news on this?

[@kudzy11]

I'm struggling to make this work on this version so far. Had the memory card formatted, then I downloaded the file and saved it to card via my mobile phone. Removed the m card ,placed in goggles.... 25mw option briefly highlights then greys out.. 😔

[@gimbalair]

I am running 0606 as I upgraded before learning about hacks. I can get 700mw on my air hd unit and my caddx unit also 50mbits, not tried the 1200mw option as yet.

[@alexbucklandphoto]

Just a quick question, which channel should I use in the goggles after doing this hack? Just bought a Pavo 30 drone and updated the Vista, I have V2 goggles as I bought them with the FPV combo. Many thanks

[@le_ti_lik]

Thanks for the video! But, question is this, is there an fcc hack for the DJI FPV drone? I can't even find power output options in the menus.

[@MadRC]

No their is not at this time. It’s entirely different firmware.

[@tomhoogendoorn9643]

Great video! What about option 'auto temp control', is it better to put it off?

[@MadRC]

You will not do any damage with it off. It just helps stopping it overheat on the ground and stopping recording.

[@jean-jacquesbarbot7836]

bonjour, pouvez vous me dire si je peux faire la modification sur mon dji fpv que je viens d'acheter? je suis en France ,et ici on ne parle pas de ce moyen pour y arriver. merci beaucoup(je ne voudrais pas faire de bêtises sur mon appareil cdt jjb

[@robi5722]

Hi, my win10 pc doesn't allow me to interact with the Vista even if it sees it because it asks me to format it due to unrecognized file system in the Vista volume? What should I do? I havn't updated to the last fw, it's still on 1.00.0606 which allows hacks, do you have any idea? I'm afraid to brick the vista formatting it (in which file system...?) Thanks

[@TongHilove]

how about after activating 1200mw, to keep using the analog module for DJI

[@tombkn_]

I crashed my fpv drone when the video feed cut out… literally was 100 yards away from me … goggles only putting out 25mw Glad I’m watching this video now

[@PhillysHobbyHouse]

I did this years ago with my old v1 googles but I just tried it with my v2 and o3 and it doesn’t work, my googles keep saying I need to format my sd card!!!! I have a feeling I need a faster sd card, v30 probably? Do you know if that is correct?!

[@juandavidbarrada]

Clear as fresh mountain spring water! Great video!

[@Jonners]

Mine only goes up to 70Mw for some reason, any advice on what's going on? Shows 4 channels and the option of 50mbps. Thanks

[@zinnbauersepp]

Hey thanks for this great video I‘ve got a question.. is it possible to bind the caddx polar nano hd air unit to the V1 goggles?

[@MadRC]

Yea absolutely they are all compatible.

[@DavidWestPhotographer]

Excuse my ignorance, im a noobie, i have the dji fpv with the goggles v2, i also own the older big goofles with the giro, racing edition, is it possible to use these with the fpv drone or broadcast to them from the v2 gogfles? Also can you view the mavicpro2 on the new v2 goggles? Many thanks

[@MrBeatboxD]

Important note for connecting the caddx vista. you need to power the viste BEFORE connecting to usb otherwise it wont show up as a drive. (at least that was my struggle some time ago)

[@devon582]

I did that still did show up

[@MrSabram07]

I thought this would be a better place to ask my question about confirming that I really have 1200 MW. Does the OSD in the goggles says 1200 mw guarantee that's what the output is? Sometimes I feel like I'm not going very far on 1200 MW

[@dugy40]

Where do u put the sd card in the air unit? Vtx or the stack?

[@autokanada]

I just did hack to my Version 1 gogles and air unit and it works as you described. Thanks !

[@Psychosix]

Thanks! As of the end of December 2021, the latest/current DJI Air Unit firmware still accepts this hack.

[@josec5276]

Thank you very much for the video. One thing that is not clear to me, if I want it at 700, I only have to do it on the caddx? or do I also have to do it on the goggles? Thanks

[@MadRC]

Only Caddx. The Goggles one is for 1000/1200mw only. FCC is 700mw.

[@DronemanfromNepal]

Got my sub with bell icon . Thnx for the video

[@MrSabram07]

Also another question please. Does having the eight channels guarantee the FCC hack? Meaning is there a way to not have the FCC hack and still see the eight channels? Appreciate any help you can give me

[@AirPixConnections]

My googles v2 is with recent update. How do I go back to previous update? Or how to reset to factory original?

[@badraven9532]

On Vista and Goggles V2, does the power output in menu only show the greater power levels if in FCC or all the time? I did the FCC hack, and after brief delay it showed the 8 frequencies and the power menu options from 25 to 700. Now, and without going onto DJI Asst or Phone, its dropped back to 3 frequencies only, but the power menu apparantly still shows 25-700, actually seeming to be set to set to 700 as shown, but OSD shows 25. Have deleted naco file which had worked, done it all again from scratch, and same, FCC mode does not set even if wait a long time for frequencies to appear.

[@MadRC]

If your in 50Mbps mode you will only have 3 channels plus public. The FCC hack should remain all the time as long as your don’t connect to Assistant 2. If your seeing 700mw in the power option your in FCC however remember it will only do that when your armed if you have low power mode turned on. The system will only enter that output if it received the arming command when you arm your motors. You should see a red unlocked message appear. 50 Mbps mode only has half the channels as it takes twice the bandwidth. Go back to 25mbps for full 8 channels.

[@badraven9532]

@@MadRC Thanks very much! As a newbie to DJI, hadn't considered the bandwidth!

[@kevshek]

Hi, does the sd card need to remain in either the drone or the goggles after youve switched them on and changed the settings? Thank you for the info btw.

[@MadRC]

No once it’s done it will stay until you connect to Assistant 2 again. The second you connect to Assistant 2 for FPV it will reset the hacks so things like firmware updating will remove it and you will need to do it again.

[@danielthornton1633]

Do you need 2 separate SD cards? One for air unit, one for goggles?

[@bennyeyeballs880]

Hi. So I plugged my air unit in. I did as you said , but when I turn my goggles on and air unit It doesn’t show all 8 channels but it shows ch 8 public and I select that , is this still the same with the 1200 MW ?

[@RockandRollRC]

...also, the naco_pwr can't be in a file on the sd card. It's gotta be at the top of the directory.😁

[@richardmcguigan1382]

i am in the us and i use my googles for quite a few drones with out issue but my dji fpv drone when i go back to fly that beast i now only have 2 channels available. i do not understand why?

[@oliviertf]

Sir, thanks for detailed explanations - I could follow step by step and set the 1200mW

[@christophereric7]

Hello, I appreciate all the information provided in your videos. Do you now if its possible to hack the DJI Googles HD latency (RH) v1 to be used either in a DJI Spark or DJI Mavic Mini?

[@RizHassan]

@Mad's after the hack will it rebind with DJI FPV Drone and remote? I use my goggles to fly the DJI Combo FPV drone and other air units on a plane as well.

[@leo0528]

Is it normal that if you update the caddx vista (with the dji assist) that the text document with the 1 stays on the vista? Its kinda weird, did i have done anything wrong? Is there a way i can tell that im in the 700mw mode? Can i display the power output in my Googles?

[@gasparzinhorb]

Hello, I'm from Brazil, I have the dji goggles and I need to repair the back button, do you know where the BLD1920 board is sold.

[@MadRC]

I’m not aware DJI sell parts. There are some places that brake it down but usually it would be a PCB repair

[@paddlesworthrcpark8215]

Hi my goggles and 03 air unit seem to of upgraded the firmware how do I go back to old firmware I'm new to this hope someone can help thanks

[@SmokytheBear6969]

So the 1200mw hack will give me better rang/performance? I am also US so sounds like i only need the 1 step?

[@classics967]

Thank you for making this as simple as possible!

[@lukefromabove4777]

Hey.. what if im using the tbs tango 2? do I have to do something on it as well?

[@ehsankeshtgar6734]

Thanks for the video. Do you know if there is anyway to receive the air unit footage on devices other than the dji goggle , like on tablet or monitor ? Is there any hack for it ? Thanks in advanced.

[@DOHCtorMiguel]

I think the v2 goggles are able to do that. With the v1 you can do it with the DJI smart controller but its very expensive.

[@BMFPV]

Great info as always man thanks! It's now 08/2022 and I have a set of these goggles on the way, doe's the power hack still work?

[@MadRC]

Yes both FCC and the power hacks all still work.

[@BMFPV]

@@MadRC Thanks man, sorry to bug you some more but will it work with the latest firmware that blocks downgrading. The internet is telling me yes and no lol but I trust you're advice more.