DJI FPV Goggles V2 - Buy Before They Are Gone

[@rotorvillage]

As a retailer whos been trying to get stock for well over a month without any luck, I'll be pleasantly surprised if they are available again.

[@steve-adams]

Cool to see you here - I'm a recent new (happy) customer :)

[@rotorvillage]

@@steve-adams Welcome to the tribe! 😁

[@Mangorille]

Hello fellow Canadian! I got my v2 from amazon back in December. Been out of stock since.

[@nejc8a]

For my opinion V2 goggles are currently the best goggles on the market.

[@egth1300]

why?

[@nejc8a]

@@egth1300 range and video quality.

[@deangelisjason3219]

But cannot connect to my mini pro 4 ...... @@nejc8a

[@2_Mars]

still the best?

[@nejc8a]

@@2_Mars yes.

[@bjrntorejohnsen1316]

I wish DJI had made the V3 goggles. V2 design, optics and screens, and with the new electronics. I think many people would have liked that.

[@The0nionKnight]

V2 design is too big. Integra size is much nicer.

[@ecenarro]

With face foam options for those with and without glasses 🤓

[@stickboyfpv4742]

​@The0nionKnight I thought so too... But for $290..... v2 goggles are not that much bigger than the goggle 2.....And for what? What does the goggle 2 do that the v2 goggles dont? And the Integras... with a smaller screen? Unless they come out with 4k.... v2 goggs for under $300 with an 03 air unit... best for price!

[@The0nionKnight]

@@stickboyfpv4742 where can you find them for $290?

[@stickboyfpv4742]

@@The0nionKnight I got em for $289 on Amzon back in Jan. Theyre $345 when I go on now. Refurbished from Amazon.... 1st pair I got was literally all dusty😆 and 1 of the antennas was cracked... So I returned it... 2nd pair was supreme........ Lit brand new, with the sleeve and 4 antennas.. battery and cable... But yeah just get em Prime and send em back if there ANYTHING you dont like... Deff if they dusty af and has a broke antenna😂

[@brianfreland9065]

I just picked up the v2 goggles, the radio, a nazgul evoque f5, protek35, cinelog25, all with air units and 5 batteries and everything already bound up and RTF for 1k even. Ive been really enjoying the upgrade from 1s analog whoops to 4s and 6s digital ripping! ❤❤❤

[@cheechfpv]

If you can afford it. The best option for me at least is to have two V2 goggles. One for the O3 system and the other running the older firmware for vistas and WTFOS.

[@cheechfpv]

@madprops Watch the Mr. Steele video on the difference between the V2 and G2. V2 has higher Hz rate and has lower delay.

[@uhu4677]

@@madpropsta The Goggles 2 are limited to 100Hz. So you can only record 50fps on the O3 air-unit, if you fly with 100Hz ... or record 60fps, when you fly with 60Hz. That's an absolute NoGo for me. The V2 is able to fly with 120Hz and record 60fps.

[@FlamingoLegsFilms]

V2 wins for me because I need to wear my glasses under the goggles, ipd and focus doesnt cut it for my vision. Plus its really nice to take the goggles off and be able to see immediately, not have to put my glasses back on.

[@MountaineerFPV]

🔥🔥🔥🔥🔥🔥Long Live the King of DJI Goggles 🔥🔥🔥🔥🔥🔥

[@SkeezyFPV]

I’m seriously thinking about picking up a second pair, bro. I see the v2s going up in value down the road. These are the goggles to have imo. I almost feel like DJI thinks they are too compatible and too easily hacked. That makes me want them even more 😂

[@MountaineerFPV]

I hear ya man. Instantly our prepping minds go to that place where we all know we must hedge! I may have more than 2 sets of V2’s myself. Question for me is do i need a third to have as a spare for 10yrs into the future. And your last point, absolutely. Thats just freedom!

[@SkeezyFPV]

@@MountaineerFPV from a compatibility perspective, these are 100% the best goggles on the market ever. Yeah I’m a noob when it comes to fpv having only been in the game since last October but I know a good thing when i see it. Have you done the firmware update to get the hd OSD for the O3 air unit? I did it last week and it’s 🔥. I didn’t have to do all that CLI stuff that JB had in his tutorial video that he put out today. Sometimes I think he makes things more complicated than they need to be lol. I ran it with my bastardized 4s 2.5” build last Sunday and it’s absolutely tits. The OSD Is glorious. I used a tutorial I found on KZbin that an Italian guy did and used the auto translate cc subtitles and had it working in about 5 minutes lol.

[@stevehoward8671]

The goggles RE are the most versatile. And even have HDMI in.

[@BaldmanFPV]

R.I.P to the extra 44 screen Hrtz.

[@QuadyMcQuadFace]

Goggles V2 master race

[@spfpv6753]

V2 FOR LIFE!

[@ecenarro]

Thank you Ian, I've been wondering for a few weeks now that the V2s are out of stock everywhere. I wear glasses and the V2s are a good fit. I also have the FPV drone and I wouldn't want to lose compatibility with it.

[@h3rtz]

Thanks for summing this up. Took me a week of questioning the DJI support in the forum to finaly get a definite statement on cross version audience mode 🤦‍♂

[@bulufish8208]

I started with those, and a way to start. Going to purchase a pair 😌 for the nephew.

[@LetsGoBrandon_]

Nothing as important as being able to bypass remote ID... appreciate your info always.

[@SkeezyFPV]

If you update the v2s to the latest firmware for the hd OSD and have an Avata without the rid update you WILL get an incompatible goggles firmware warning when you bind to the avata but no worries; it still flies and you don’t really need to upgrade the Avata firmware. I updated my v2s last week. I got scared for a second but the warning was able to be cleared in the status menu and the Avata without RID flew just fine lol

[@uhu4677]

Hopefully there will be a successor then soon. The Goggles 2 is a huge step back, because of those 100Hz displays.

[@jessjess3369]

Because its Oled screen.They cut down the Fov size and hz to bring the cost down..v2 is still the Go To goggle for me

[@AlfieDoug]

Bought a nice used pair last week for £200 also bought a 03 air unit.

[@madladdan]

200 quid is mad cheap

[@AlfieDoug]

@@madladdan The guy had just bought the goggles 2 and needed the cash, he might be wishing he bought the cheaper version now, I still have my goggles V1 and some original air units and vistas but will keep,the V1's and root them to install wtfos.

[@madladdan]

@@AlfieDoug You scored big time. Keep those beauties.

[@maxun1]

Ian how in hell you can remember all that, fantastic.

[@mikespeedyfpv321]

I love my V2 goggles.

[@00fluxone]

as a long time V1 owner I just upgraded with careful consideration to a used set of V2s.... I wear glasses and fly inav wings as well as drones - the goggles 2 just didnt have the features I use... cross compatibility and wtfosd FTW!

[@killawatt_fpv]

I just bought them

[@RADERFPV]

V2's are the best option for most pilots out there. I'm lucky to have the g2's actually fit my face and am a sucker for the OLED panels, else Id be rocking those V2's as well. If I didn't have HD2's already for analog, V2's would be on my head right now.

[@whadayaatmeolcock6071]

The V2's are the best looking by far

[@GarethDix]

Gonna be pretty annoyed if they stop supporting the V2’s with the newer air units

[@QuadyMcQuadFace]

I was going to agree with you but tbh Goggles V2 with 03 Airunit your G2G for at least 2-3 years maybe more.

[@elxero2189]

​@@QuadyMcQuadFace 3 years is a surprisingly short time. But perhaps that's enough time to get the next

[@stickboyfpv4742]

​@@QuadyMcQuadFace Not goggles v2... The v2 goggles and the vista....... Arent EVER gonna be gone forever. And dont the v2 goggles work with the 03 air unit.... tf ppl.... WERE SET!

[@craigdavidson52]

​@@stickboyfpv4742 yes but if dji decide to stop supporting the v2 and lock them out of the 03 so you are forced to update or stick with Vista.

[@carlosmcnulty]

be prepared to be annoyed 😅

[@FPV_Reject]

I’m probably the only different one here. I have both the V2 and the G2. My V2 was decked out with all the upgrades like the foam padding, the stubby and iFlight HD patch antennas, detachable analog module, etc.. A great unit for sure and has been a workhorse. However, I’ve been using the G2 more and more these days for one main reason, it’s very light compared to the V2. The V2 is just too heavy for my face, I get tired wearing it after 2 flights. But hey, that’s just me. I can still use the V2 if I need to or use it as a spectator goggle or maybe I can sell it.

[@tomaszboril]

the G2 image is stunning, sure the corners are not that sharp - BUT they were not sharp on V2 for me anyway sooo, G2 with TrueRC is absolute killer for 50mbps

[@tong.clement]

For people with glasses like me, I think they need to make a compact version that still allows glasses to be worn.

[@abiodunjohn9790]

Will you sell it or gift me please 😢

[@GordonScottYankeeEngineer]

After watching this, I have a new appreciation for analog 😂

[@GordonScottYankeeEngineer]

You did a great job it’s just that my brain hurts trying to keep up. Goggles2, V2, Integra… what transmitter works with what goggles? 🤯🤪😄

[@Ice-FaceMedia]

AND ,IF I MAY ADD, THEY CAN DO ANOLOG WITH THE ADAPTER V2 ALL THE WAY🦁🦁🦁

[@Les_Grossman]

Good Point! That is why I ll keep mine.. Or get something completely different like for the Whoops

[@moemaster1966]

I wouldn’t worry about it if a new FPV combo comes out unless they drop batteries and app support … the mavic air and phantom 4 took 8 year before batteries dried up to a noticeable amount

[@FlyZoneFpv]

Thanks so much for all you do Ian . Your so informative 🦾🦾🦾👊🏻

[@philipandrew4819]

Have had the v2 Google’s for two years now with some caddx vistas and a air unit use it every week and it all works like new . It is all used for freestyle use and in the past long range “or should I say longish range . When they break that could be a long long time the Google’s 2 could be my next investment , just liking the reliability and time flying . The only thing on my mind is the way the rules and regulations are going looks like it is fading away even though all the new kit looks good . Think fpv will find a way ! .

[@illyrodrigues9159]

DJI have made the V2 too good and they hate it now so they get rid of it. Basically the OG system works with all of the DJI goggles but apparently they have made a firmware that the V2, Integra and goggles 2 purposely are not compatible with each other. I'm pretty sure they would work with each other because the DJI video protocol is still the same and all of the goggles work with this DJI video protocol. Otherwise the V2 would stand in the way of the Integra sales because the V2 is cheaper and more allround. The V2 can also be used as analog goggles as well and the video quality of the V2 is still very good compared to the Integra or goggles 2. The range of the V2 with improved antenna's is better than the Integra and goggles 2 as well. That's just my opinion :)

[@stst8301]

That's true

[@HeximusP]

what is the very best antennas for range on the V2. thanks.

[@MCsCreations]

Thanks for all the info, Ian! 😊 But yeah, it's still a bit messy... I hope they work more on the compatibility. Anyway, stay safe there with your family! 🖖😊

[@BBSlats]

You don’t own them how is it messy for you

[@stst8301]

Dji fpv goggles v2 all the way!

[@flyinryanfpv]

Thanks for the informative vid! Cheers mate🍻

[@beefybeef1326]

Still on the v1s and happy 😛

[@dronephotographyireland]

Same as that

[@jahnkeanater]

I was thinking about getting the V2 but I don't see any reason to.

[@adhesivehero]

I just bought a set of G2s, but they pinched one of my nostrils shut and just weren't comfortable for me. aftermarket foam didn't help. I decided to send them back for the V2s and applied for a refund yesterday, and boy i am gonna be so mad if theyre unavailable by the time my refund goes through

[@bspringer]

Never thought I'd hear someone say that the compatibility is good on DJI 😅. At least for me, having to rebind every time and even worse: abandoning the black remote completely is not good compatibility. Especially the remotes, they are basically glorified e waste in the future. Also, I'd take the Goggles V2 anytime because of WTFOS. No matter what, but open source is king. Though not because of DJI. Furthermore, analog in provides decent analog flying options for some. Can the Goggles 2 even do video out via USB?

[@AerialWaviator]

Great info. Thanks Ian. A couple key features missing from most HD FVP systems are (1) video in/out, either USB or HDMI video. Would make it easy to had external monitor, or to tether to a buddy regardless of goggle model. The ability to (2) connect more than one camera to a VTx and switch between them. Its very fun and useful on wings. Great in other applications tool, particularly now HD quality is up there with action cams. (doing with analog was simple, and many flight controllers included such support)

[@SensorDelay]

Really hoping for a FPV Goggles 2 because to me Goggles 2 aren't worth it. For me losing the 144hz refresh rate, losing the ability to Selecting Channels, the ability to select power output, and not being able use up 6cell bats as an alternative to the DJI goggles batteries was a deal breaker for me.

[@cstfpv]

Waiting for the tear down of the Integra 🔥

[@lasersbee]

In a few month they will probably come out with DJI Googles V3 that will only be compatible with the 04 Air Units....

[@beefybeef1326]

This is why im not buying the goggles 2 or Integras

[@lasersbee]

@@beefybeef1326 Seeing DJI previous FPV Screwups... It won't be long before the Googles 2 and Integra will be obsolete when they come out with a New FPV system... I'm staying away from DJI.

[@beefybeef1326]

@@lasersbee i totally agree. Dji's business model is based on rolling out new stuff as frequently as possible and completely abandoning customers that have already baught. I think they make great products but generally treat their customers like turd. I also hate that feeling when i buy a new thing and in the space of months its EOL and not compatible with new stuff. Thats the thing that puts me off the most!

[@vertibirdfpv]

Downside to the 2 and Integra is form factor. The binocular style goggles do not fit me as well as the v2

[@arQadjo]

But with a lot of old AirUnit, cause DJI policy quickly "remove" (out of stock) and you have to buy new goggles for - lack od compatibility

[@maddmavic]

Does this mean they went up in value if have them

[@satsingh6718]

Help ! own these v2 goggles and recently bought the bdi adaptor & speedybee module so i could use for analog. I have the dreaded bluescreen! Running firmware 607. What's the easiest way to get things working please, use butter to downgrade to 606? Thanks for any responses

[@tk-maker]

It has AV in, thats is what i needs

[@DoubleJuriy]

i like your speaking style! Thank you brother for what youre doing!

[@jeffreynolds2190]

About v2 spectator connection, does it work well, I tried when they first came out and had no luck at that time. I would buy another set for friends to go on the flight with me, if it works ?

[@yannickg6904]

I tried recently with 2nd pair I purchased used. It works, but the goggles need special settings and there's a binding procedure. There is a project using a Raspberry Pi that turns it into a USB to HDMI converter for DJI goggles. With it, you can connect your goggles to any HDMI display (DigiView SBC).

[@ryswe]

I'll buy anything DJI makes because they make the best gear, end of story. I say that as someone who flies analog and hdzero too!!!!

[@elxero2189]

So its the best for you then lol

[@jpmkiv]

I can only use them with my glasses/vision and I am not dropping that much cash on a backup set.

[@bullitanaconda]

is one of the two goggles compatible with dji phantom? i am currently using fathshark google with DJI phantom 3 pro via a HDMI cable with the optibal modial i wish i can use the DJI googles with the same setup

[@tubamanandy2]

I still prefer the DJi picture to all of the competition

[@toolmakerdave5287]

good lord all that made my head hurt😁😁

[@robertgiordano3452]

All good reasons to switch to hd zero

[@slappomatthew]

Which goggle is easy get the hd zero goggle with walksnail vrx

[@maxun1]

DJI made a mess with all this names for the googles, they should separate in color names that way will be easy to mix compatibility, second, eventually all the googles that you talk will be obsolete v1 v2 etc because compliance with the FAA at least in the US. Yes now people will use it until they break without R ID, so here the bigges thing is that the airunit will be compatible with the integra but you will loose the ability to record in the airunit, what about the wtfosd? still compatible with airunit and integra googles?

[@sanoos821]

Hi I have a question I have a DJI Google v2 how to connect my Mavic pro 2

[@MadRC]

Sorry they are not compatible.

[@laplacia]

Soon, they will stop supporting it. So.. wht buy now?

[@sarcasticfpv3862]

Quick question Ian, I have two problems with my V2 goggles and the o3 air unit. First of all I can't record any dvr at all. With a regular SanDisk card. I then got the black V30 SanDisk extreme pro with and even with that one it's not possible to record dvr. Oddly enough with the gopro 11 I record 10bit 200mbits 5k30 and 4k60 how is it possible that the 810p120 dvr can't be written on it? 2. When flying the osd freezes usually around 2-3min after Liftoff. On top of that when i reboot the drone it doesn't help at all. When i unplug then plug the goggles usually it will work again. But even then a couple of times I have to unplug plug the Copter too because even though I can see the osd I have strangely enough only 5mbps as if it's in low power mode. I know especially this second part sounds confusing maybe you or someone else can help me with it.

[@fluffynl3390]

Still the option to use the goggs v2 and the fpv remote v2 with a vista air unit or so isnt there yet 😢

[@xORLOCKx]

The 03/G2 has no advantage to upgrade for me personally. I'll be V2/vista till they are all broken and can't be bought. Then I'll go walksnail

[@serang]

This is 2023. Landscape only video recording in O3 is outdated. Go with vista, it's cheaper. You can mount gopro horizontally or vertically, or use something like insta go 2 to get both vertical and horizontal footages. With O3 only, you can't fly it while it's vertical.

[@xORLOCKx]

@@serang I literally said I use the V2/Vista and won't ever change to the 03/G2

[@skyviewmediaHun]

And it's still available...

[@MadRC]

Actually no. They are no longer sold as new stock.

[@infa008]

@mads tech, You said in this video the downside of having the Goggles two, you'll have to connect your phone if your in the US. Previously you said for the O3 the goggles two won't force you to connect your phone for remote ID. I'm confused

[@MadRC]

For Avata.

[@infa008]

@Mads Tech thanks Mads. It's been really frustrating swinging my s23 ultra from my goggles. So much so I'm dreaming of building an o3.

[@craigdavidson52]

Got mine 😎 Hi 🇬🇧

[@elxero2189]

Why would we want to buy something that's about to basically loose support

[@myfalconry76]

Dose that mean to get the v2 is going to cost more.

[@SmileZ4193]

But if I would upgrade the V2 Goggles to the firmware which supports the O3 Air Unit the FCC Hack no longer works or am I wrong? I heard many V2 users complaining about it..

[@TheCatFather01]

Wrong. I have the latest v2 goggles version, nothing to interfere with the fcc hack

[@SmileZ4193]

@@TheCatFather01 really? Thats nice!

[@serang]

Make sure you root for WTF-OS it before upgrading

[@TheCatFather01]

@@serang with butter, you can root any version of v2

[@serang]

@@TheCatFather01 I didn't know that. It has been a while since I rooted my V2 🙈

[@joenaylor34]

After watching your video (great presentation by the way, thanks for doing it) I decided I needed to find another Goggles V2 to back up my existing goggles. Almost too late, but I did find a refurbished pair on Amazon. Got them and they seem fine, except that I cannot activate the goggles with the DJI Assistant 2. They connect to my DJI FPV Drone OK, but the goggles display the message “Device not activated”. DJI Assistant 2 connects to them and allows firmware changes but never displays the “Activate” screen. I assume this is because the goggles have been activated by the previous owner. IS THERE ANY WAY I CAN ACTIVATE THESE GOGGLES WHICH HAVE ALREADY BEEN ACTIVATED BY A PREVIOUS OWNER?

[@MadRC]

Are you using assistant 2 for FPV ?

[@joenaylor34]

@@MadRC I am using the app called "DJI Assistant 2 (DJI FPV Series)". I had no problems connecting to the used pair of V2 goggles I just bought with this app, and I was able to update the firmware on the goggles. However, there is supposed to be a popup for "activate" and this never populated. Actually, other than the annoying message which says "Device not activated", I seem to be getting video OK from the FPV drone, so maybe the answer is to just ignore the message.

[@joenaylor34]

In case anyone else has this problem, here is the solution. It turns out the correct app to "activate" in this case is NOT the "DJI Assistant 2 (DJI FPV Series). It is the "DJI Fly" app. After I connected to this app and went though the steps I am no longer getting the "Device not Activated" message.

[@typxxilps]

time to get all the parts that you might miss later when they have broken cause spare parts are the key issue for all older goggles, not the tech itself which is still working fine like the Goggles Racing edition from 2018 , those red ones. But cameras and air units are long gone, also the diopter lenses you might need if you do not wann wear glasses. And this means to hurry and safe all the parts you might need and right now not sometimes in the future. Why ? Prices will go only one way: up And if you have more spares than you might need in the next 2 years then you will also get the prices in 2 years for your still unused spare parts cause for brand new parts in the box people always pay a premium, especially in sealed packages. Therefore better to get what you might ever need and later sell those parts separately after you have sold the goggles cause these parts can become worth a fortune compared to the now low prices if you can get them in the next month or so cause dealers will offer discounts soon once DJI declares a no longer sold or eol anouncement. You can check this for all goggles dji had released, always the same pattern of the prices and spare parts cause they will sell out sometime.

[@HuntAndFishExchange]

So.. If I'm still using the V1 goggles and wanted to upgrade goggles to the V2, I would also have to purchase the grey controller.?

[@jefffpv2759]

to use the 03 unit, fpv drone or avata with a controller then yes. you could buy a 3rd party controller and compatible rtx.

[@bengordon7635]

I got both on ebay Goggles 2 for $450 new condition no battery or strap ,Goggles V2 i got for $219 , DO NOT BUY the V2 buy the Goggles 2 ,, stream movies .. with wireless streaming ,,play computer games on your goggles ,, The goggles 2 are just so much better far far superior especially the Pixels ,,, the V2 the pixels are so noticeable ,, the goggles 2 watching movies is like at the theaters incredible ,, My V2 I try to use the other day and just put them back in the case collecting dust ...another old set of goggles laying around for backup only

[@speed2o7]

Do you still lose all your bindings on the V2 goggles when switching between Vista and O3 mode?

[@MadRC]

Yep

[@Pozzix65]

There is a new patch for wtfos that prevent this

[@808TRK]

@@Pozzix65 barely -- Fixes binding loss for AU/Vista when switching from FPV/Avata/O3 mode to DIY mode. Does not currently work the other way around. The glass is half full.

[@oneistar6661]

Yo, eyeing upgrade from v1 to V2, but I'm asking are old air units and vista compatible with V2 and newer protocol without hard cap on range? Is the WTF.OSD working?

[@alekblaser]

Wtf working for me on v2

[@SunriseWaterMedia]

5:10 V2 or Goggles 2?

[@EvGen0378]

А еще на очки V2 есть возможность установить аналоговый модуль!

[@propterme9165]

есть

[@EvGen0378]

@@propterme9165 это был не вопрос, а еще один факт, плюс в пользу V2

[@lasersbee]

DJI screwed up their FPV Systems to what is compatible or not compatible.... What a freaking mess.. Glad I went with HDZerro and Walksnail.

[@tbd6403]

where can you buy them now?

[@NordFPV]

They stop producing the Goggles 2 since last november

[@noahhalkjlr7478]

does the mini 2 work with the goggles?

[@MadRC]

Sadly no

[@vanlifefpv6340]

The V2 goggles never fit me at all. Glad they are getting rid of them.

[@Seii-FPV]

lol, like they built them just for you, just so you can have a perfect fit. They fit to a lot of other people just fine.

[@waynegoldpig2220]

Did you make any effort to customise the foam insert to the contours of your face? If not, you have no reason to complain.

[@gmivisualsjason3729]

Buy buy buy...... The new Goggles just don't appeal to me ...

[@maddmavic]

So because my adhd brain can't keep up with all this info lmao am I able to connect v2 and g2 together for some one to see me fly either avata or fpv

[@obsolete4735]

You missed the BIGGEST advantage of V2's: They can do analog. End of discussion.

[@dax4812]

This

[@alekblaser]

I’ve never tried this, does it perform fairly well? Or does it have its quirks?

[@dax4812]

@@alekblaser Actualy it is great! Only "quirk" is if you lose the signal completely, there is 2-3 second delay until it comes back. I fly long range and have no problem with this.

[@alekblaser]

@@dax4812 is the anyway I can PM you? I’m definitely interested in this for a 7inch build

[@obsolete4735]

@@alekblaser Yes, it's pretty decent. You need an additional module and receiver with antenna's. There's an additional latency but for regular use it's perfect.

[@ronin_11b94]

“CPAC Shakur”

[@yojazdayo]

What is the max. range of goggles V2 with O3 Unit? Is it ~24 km like in G2?

[@maxst91]

I think is 4km at max.

[@maxst91]

10km for the G2.

[@robripingill4897]

Yeah..that really sucks that DJI has completely abandoned the compatibility for the DJI FPV Drone to be able to use the goggles-2 or the new Integra, I Don't Get It DJI??👎

[@FPV2w]

theyll be on ebay for years to come

[@PW.1993]

“DGI”

[@malanalan1]

too many buzzwords. not much usable info. What people want to know is whether it is going to work with their drone and their RC.

[@MadRC]

Well this is not the video for them. This video was nothing to do with what the compatibility is. This was about availability hens the title. Perhaps look for a video called what DJI Goggles V2 compatibly. Complaining this video is not telling you what works is like walking into a bar and complaining they don’t sell laptops.

[@dheth]

Or just save the money an buy hdzero

[@swoondrones]

Why would anyone want them?

[@jeffv2074]

DJI is doing exactly what Apple has been doing. I need compatibility. All goggles are over price they're not worth nowhere near the retail price. I don't have money to be dropping on fpv goggles every time the company comes out with a new one. It appears to me that no one is ever satisfied 😅fly your shit and be happy. It's just a matter of time one of the other Fpv goggles manufacturers will drop another expensive set of goggles that will have features the current one doesn't have, and so on and so forth, Smh. 😪 let's just waste money.

[@notsweep]

this is like apple

[@808TRK]

Making new products, updating the tech constantly. Good on them.

[@notsweep]

@@808TRK good tech, but kinda locked

[@deangelisjason3219]

How can connect goggles v2 to mini pro 4 ? Is it possible guys ?

[@gingerdude94]

They'll be 2nd hand one's available for decades, don't fomo chaps.

[@catmanfpv9213]

So sad😢

[@matthewbradley8971]

No thanks. Image quality of 810p vs the new goggles 1080p is night and day.

[@raptr49]

Sorry, but you just gave me one blazing headache. Screw this, I'm switching to Walksnail. Life is just too short to put up wth this DJI nonsense. Kind of reminds me of the FrSky fiasco a few uears ago.

[@DavidTaghehchian]

I give it 6-12 months before DJI kills the compatibility from the V2 goggles to new VTxs (O3 and later)

[@serang]

If it's how they work, I'll switch to HDzero. Opensource, baby! Not 100% open-source yet, but at least communities have chance to maintain.