DJI FVP Build : HD Drone Racing!

[@ddegn]

Thanks to your customer for having you build this. Thanks to you for sharing your build with us.

[@immortalbigd4122]

this is one of the best build video's i've find to build DJI FVP and u show a battery to keep up the good work and when i get my kit i will be watching your video a few times to build me too

[@scootroter4859]

Fantastic video! So concise and well edited! No fluff! Just great content! Way to go, Bro! 😁🤘

[@sougatajoardar4377]

Wow.. thanks for this elaborated video. The whole process was done with ease. Thank u. Keep flying

[@Jamesn-js1zp]

One of the best DJI FPV videos I've seen yet. great work

[@chaserporter]

I paused a moment when you wired the air unit's power to vbat before realizing that this is a 4s build. We have to keep in mind that the air unit can't take 6s voltage in. If anyone intends on running any more than 17 volts, you will need to run a regulator to power the air unit. Great build Mike, as always!

[@FlightClubFPV]

oh yeah, good point. it can take battery voltage up to 4s only

[@tehllama42]

If you have to, any old 12V UBEC will do - and you can slap a 16V 220uF capacitor on the output, then feed the air unit straight from there.

[@magnusfpv7765]

wanna make 6s drone so i need capacitor on 6s battery to work with dji air unit? Thanks for help anyoone

[@chaserporter]

@@magnusfpv7765 You need a step down DC Regulator or BEC. Search for Matek 2-8s Micro BEC with a 12V output. Racedayquads has one for $5 that would work perfectly.

[@magnusfpv7765]

@@chaserporter and what if i use T-motor F4 OSD Flight Controller & F55A PRO II BL_32 DShot1200 4in1 ESC Stack for RC Drone FPV Racing it have 5v/2a bec power for camera receiver and other equipment?

[@MrDutchman100]

Oh ya love flight club, nobody does what Mike does and that’s what sets him apart from the rest. Go FLight Club.

[@kool-k-kel]

lovely build, thx for vid , probably the first build ive seen for the dji fpv... :)

[@woogieman02]

Having flown a quad with the dji unit in it......all I can say is I want one! The video is insanely clear, and awesome to see. Just need price to come down a bit more. One thing to note though....a set of patch antennas seen to work so much better than the stock antennas, or axii antennas

[@chrisyoung1807]

Excellent video. I'm keeping this one.

[@NoWheelDrive]

Great video! Please consider making another video about building a long range FPV drone using 7" frame or larger.

[@kennydimitra]

omg this is the video that look for, thank you so much for uploading dude. finally i can build on my own. because many channel too many talking shit. and you doing great job straight to the point. and thank you so much for great explanation 👍🏻

[@nes.torfernandez]

Kenny Dimitra do you finally build your own following the instructions?

[@MCsCreations]

Beautiful build, dude! 😃 Yeah, the system looks fantastic!

[@archer4922]

Love that track in the drl sim. Great build vid. I got to try one of these out at our race Sunday. Awesome video in the goggles for sure. Game changer.

[@FlightClubFPV]

yeah it's unreal seeing race video that clear

[@archer4922]

FlightClub yes it is. The image is soooo clear compared to analog. See so much more of the track compared to my normal ccd cams. But there are some nice cmos cams that look better than the ccd I just need to find a good one that isn’t $45 lol. I’m liking the runcam nano cam and If I could find a micro cam that’s similar to the nano or better than the nano id grab a few. I’ve got a Predator v2 in my hawk 5 I love the image but it’s a little on the blue side even after adjustments. But gates just pop in the screen with that cam the white mgp gates and yellow quaddiction gates are so easy to see. Any suggestions on some good cmos micro cams?

[@michaelpetale6872]

Love you info vids bro they rock!👌👌🤗🍾

[@FlightClubFPV]

thanks man!

[@gabyguay6990]

@@FlightClubFPV agree :)

[@toad2039]

holy molly that moment when you realize you've flown this track on DRl 😁😜

[@neilreid9005]

Great vid- I'm looking more seriously into this for my second drone. Well done and many thanks.

[@ghostnumber717]

You basically answered my question I had about this drone lol!! thanks for the video!! I just want to use it to attach a go pro so I think this one is good

[@mikeybroe1]

no

[@harrylaps3041]

thank you! you've cleared up so much missing information

[@luiz1919]

Fantastic video and very clean welding... btw, I've seen that most of the people also use a capacitor to reduce electronic spikes together with the battery, but in your video you don't.. Did you find any problem while flying?

[@ubyte1]

Nice build thx for video

[@Sully365]

Good stuff always

[@DillonHoopes]

great video man, as always!

[@wolffpv535]

Awesome build, thanks for sharing

[@lukaskuth7195]

hey Chris, i bought this system from you a while ago...great video btw. I would like to point out one thing though: IT IS VERY VERY IMPORTANT TO SET THE DEVICE PROTOCOLL IN THE DJI GOGGLES TO NORMAL..otherweise betaflight will not recognize the DJI remote. just thought i could save some people some time :-)

[@johncarr123]

Great video build!!!!

[@rawpicsfpv3516]

This build is so clean! My always look so complicated...

[@lustarwaholmes9913]

Hey there. I am just starting to build my first drone and was thinking of using your video to do it. However, I was wondering, what batterie are you using for the kit itself. If you could give me that info I would be grateful. thank you so much for your time.

[@PPrince1566]

I am trying to build my first FPV drone ever, i would like to go with DJI FPV System but I want to build a 6s, with astrox x5 body, lumenier 2207-11 1750KV My question is can I use XILO Stax Combo 45A BLHeli_32 6s 4-in-1 ESC and F4 flight controller with DJI FPV System? If so does it support play and plug or do i have to solder the dji to XILO flight controller? Thanks in Advance.

[@pilot_j_j]

@flightclub newbie here can you please do a follow-up video for this build that talks about the best battery to buy and where/how to mount? I want to buy it all from your store and this is the only part I'm unsure about.

[@pilot_j_j]

Hello? Where/how do we mount battery? Can we mount OSMO Action?

[@fpv_drone_adventure]

Where do you mount the battery ? Sorry noob here. Badass video thanks for the tutorial.

[@RobertTheFriscoSchmid]

You sharing the 3D parts you made? AWESOME btw!!!

[@FlightClubFPV]

sure why not. i can upload to thingiverse tomorrow

[@RobertTheFriscoSchmid]

@@FlightClubFPV thanks a lot

[@XDiezieX]

Hey buddy, at first a nice Vid. I have a Question: is that quad for 6s or 4s ?. Cause i know the DJI AirUnit need max. 17,6V . And a normal 6s LiPo gives over 20V...it looks like the 6S LiPo in your Vid. Greetings

[@rango_unchained]

I'm new to the FPV aspect of DJI, but have a few Phantom controllers. Can I use one of them to connect to the FPV system? If so, how would I do it?

[@aliens99xx74]

Very nice

[@arandom.potato]

10/10. Ive been binge watching FPV drone videos all day and this has been the best/straightforward how to build. Just curious, how much would the total for this exact build cost?

[@gabyguay6990]

FINALLY, a nice installation like always. What about to use 6s? with a Bec? And I hace seen RSSI and GPS in a video, How will it posiible? THX in advance.

[@nes.torfernandez]

#Gabyguay69FPV # by bro do you found a solution for 6s?

[@gabyguay6990]

@@nes.torfernandez I have ordered a BEC matek (3 pieces) 1 for matek,1 for ar unti. there is a forum in facebook very ussefull, join it!

[@joergschueller_teamspieltrieb]

Dude, i got problems with no Voltage from the FC in the goggles...you showed me the hint!!! THX

[@urhe4547]

Joerg Schueller ho did you solved this problem?

[@joergschueller_teamspieltrieb]

@@urhe4547 aehhmm..i think it was just swapping the rx & tx...

[@heartofamericafpv5584]

it works fine if you are using IMD6c. Raceband 6 isn't used in that set.

[@arturberg2875]

And, what battery you will recommend ?

[@24kshotz94]

Thank you for the video

[@personalJimmy]

Good Day great video I have a question the Fly controller its possible use F7 I see in the recommendation of DJI say F4 HD F55A PRO II but a F7 what do you now about this

[@davidwong5104]

I have a question, and I think I might have waste a bunch of money on this, my elevator is inverted, so when my right hand push up, my quad tilts back, and push down on my radio, my quad goes forward, how can I change that, I can just change the weight on my Taranis in the mixer page, how do I do it for this?????

[@arturberg2875]

Hi, i will build this drone, but what about props?

[@balelab4211]

Hi, thanks for the video. I would like to pair the hd stack with t motor f80 2500kv on 4s. What do you think?

[@alexmoil6256]

nice ,thanks

[@magnusfpv7765]

I wanna make 6s drone so i need capacitor on 6s battery to work with dji air unit? Thanks for help anyoone

[@tehllama42]

So, this makes me ask - is there a chance of a Proton-7 frame, or similar 7" frame with extended nucleus plate set up specifically for this a possibility? I think the possibilities of long range and endurance flying using the air unit 4:3 recording and some post-processing to make some ridiculously cool videos

[@fly_code7755]

I like it!!!!!!!!

[@rickflare6893]

Will the 3d prints work with the regular proton? That air unit looks unsecured like it’s going to just fly off the quad in a crash.

[@EMDRONES]

Hey Mike hope all is well wheres Sed hendo and Ivan ?

[@HackyDrone]

Recommended Binding Order 1. Air Unit & Goggle 2. Air Unit & Transmitter

[@urhe4547]

thxs for the video! i made also one but i used the tmotors f4 fc with the connectors so i dont had to solder between the air unit and the fc. but now i dont see the power indication of the aircraft in the goggles. instead is marked n/a. can you help me?

[@nikhayes3396]

I also had the question I read others have posted in the comments. Must be a 4S build. But with all these videos and tutorials on running 6S on a 4S quad, You had better contact your customer and advise them that they cannot do so unless modified. I have almost the Same Stack that I am building out at the moment. I was in a bit of a quandry, because the FC does not have a 12v pad for the Air unit. However there is an unused pin coming out of the ESC however I see very small on the ESC it says 10v however there is no wire in that hole on the plug, a bit strange... but instead of running a 12v Bec off Vbat, I put a wire into that plug and plugged in a 6s battery and tested it with the multimeter and sure enough 10V. So I am hoping this works out. Probably not the best place to post the info but if anyone else is here and wondering what to do on a 6S build I thought maybe it would help. However let me advise I am just building it out, so real world I don't know if its going to work. Actually going to plug in the Air unit and 6S battery right now with USB C connected and Register with the DJI tool (DJI assistant)

[@nikhayes3396]

Plugged in, Bound, activated and connected to DJI assistant updated.... Seems to work so far so good. On with the 6S build later.

[@SK-wf1oh]

hello Can You give me some advise what's system I can used as autopilot? Or this setup does include?

[@hugofrayssignes3179]

Thanks dude

[@angellara3281]

with your set up, are you still able to use the OSD? In your video, I saw that you turned it off and im wondering if you did that because you didn't want to use it?

[@fikrisahab5214]

Thank you 👌🏻

[@sunilkumar-iy7kl]

Good

[@LIFT504]

If I buy the system! Would you be able to build me one? I know nothing about FPV world and would love to get into it!

[@absoloodle37]

What’s the empty/all up weight of your build? Looks really clean!

[@FlightClubFPV]

i just measured, with no props, or battery it's 323g

[@BedstuyDude]

Dude, is everything ok? Where’ve you been

[@prowlus]

how do you reset the trims on the reciever if there doesn't seem to have any trim buttons on the dji remote out of curiosity?

[@martin94FCB]

i just got the setup and connected it to my quad. everything works but it only shows 1 bar of signal when the quad is right beside me. when i walk like 5 meters away, the connection totally breaks off. does anybody know what's wrong? The antennas are plugged in..

[@Jamesn-js1zp]

The frame you used for this build, your website list many options. What exactly have you used regarding options?

[@jonitan76]

check the description. all on the list up there

[@checkeredflagfilms]

what do you charge for builds like this?

[@SchMasHed]

if I wanted this exact thing how much would it cost me?

[@jerry76152]

colourblind?

[@subiwrx1]

How much to build and send to Australia?

[@jonitan76]

maybe here www.nextfpv.com.au/

[@tofft4060]

When we are usikg a taranis do we hav to use a external vtx?

[@MrSnlac]

What i really reaaally want to know , and Fyi i searched everywhere but couldnt find na answer , is if you can change the sticks of the remote DJI controller ?? I am left handed and ITs better for me to fly like this . Thanks

[@FlightClubFPV]

i don't know. i just measured and the gimbals use 3mm. taranis is 4mm

[@heartofamericafpv5584]

so.... I just checked my proton r builds and EVERY single one I have the bottom plate backward. The arrow points to the back. What does this do?

[@FlightClubFPV]

you probably had a hard time lining up the arm screws, haha.

[@sokvannakyun118]

I bought the DJI FPV System one set including remote. I activated the goggle and remote with no problem. I soldered the Air Unit to my iFlight SucceX Micro F4. then i set it up in the betaflight. I followed your instruction. I opened the port Serial RX for the SBUS and enabled the SBUS in reciever tap, but somehow i can only receive Video but no signal from remote. In the receiver tab in betaflight show now (no signal received). One thing i did differently is that i power the air unit up by using the power from battery pad directly because there is no 9V output pad on my flight controller. Is it the issue? if it is i think the air unit would have already burn, but it is not. i still can see the video on the goggle. Please help!

[@ALNDAddiction]

Exactly the same issue here with a tmotor f4 FC

[@rbonvent]

thanks for the vid man great info. possible to share the stl files for the antena and camera? TIA

[@FlightClubFPV]

yes i'll post on Thingiverse

[@familytreasuretravelsandto7879]

where is battery ?

[@jetjitters6474]

What happened? Subscribed and wondering if any new vids are coming.

[@carveking]

i wonder the same thing

[@Zeisslermusic]

You make good videos. I Think the system from Dji is not for me, i have the fatshark hdo

[@kaju8112]

Is it possible to put a gopro on it?

[@needlessgamer9644]

Why it comes with HD camera

[@visiteavecmoi]

Must be over 250 Grams haha but nice setup!

[@AndrewBlanche]

Lol, ah I had to special order special order standoffs to fit the air unit. Cause nobody stocks 100mm standoffs.

[@mohdsufian6326]

Love this, but dji goggle is too expensive for me

[@greatchannnel4182]

where i get every part dji dronw racing

[@FlightClubFPV]

links are all in the description

[@quins7387]

Can i use betaflight osd.

[@FlightClubFPV]

not with the dji camera and vtx. it uses it's own OSD

[@marwans4018]

Osd can be displayed on the dji fpv air unit ?

[@FlightClubFPV]

yup

[@FlightClubFPV]

i tried to record it but the air unit doesn't record goggle dvr with osd

[@marwans4018]

@@FlightClubFPV thanks

[@marwans4018]

what is the max range ?

[@woogieman02]

Dji claims 4km

[@jerodbosh7630]

You don't have to be rich to fly the best gear in FPV. Speaking from experience you're better off starting with the best equipment available. Most of it is a one-time purchase..... $2500 will set you up FAT with the DJI system, a couple of quads, simulators, tool's, batteries, etc. The last set of golf clubs I bought we're $2000 plus $50 every time I play. We lose 2-4 thousand dollars in depreciation on a snow mobile every year. Buy the good shit!!!

[@johncarr123]

Its to bad that DJI did not make it an option to bind the Sbus transmitter to a Taranis

[@cafub2650]

What do you mean?

[@johncarr123]

@@cafub2650 someone needs to make a module for Taranis transmitter so we can Bind the DJI Air unit.

[@yassinvlogs4595]

the first ever video i understand something i never understand anything

[@JonasGrumby]

If they ever match the DJI cam to a drone in a RTF package it will be permanent sold out.

[@Tintin-dm4ym]

Travis Stratton apart from the £900 rrp of the dji FPV goggles and camera alone, biggest rip off ever, give it 3 years and everyone will be doing digital at sub £300

[@nick-dm3if]

@@Tintin-dm4ym its not really bad, 800 bucks isnt bad considering how many shitty fatsharks i have owned

[@TexasWaters]

That's for sure so you can overcharge them for outdated equipment.

[@panthai272]

I think the digital System is mutch better fr Freestyle, we have wait fr this! But we should wait what s comming up in the Future, DJI is the first Company there come whith it nd DJI can not be the Aple fr FPV, hopefuely. (:

[@amaz1ngchr1s57]

Hi bro where did the seller buy the drone you assemble could you tell him/her plz bro pm me on Facebook Chris Hayden otis If i buy one of these im going to copy your assembling thanks it helps alot

[@Gabrielslegobuild]

Can't even put the right title..... Lol