DJI Mavic Air 2 - Repair Left Front Motor Arm Replacement - 1213

I crashed my DJI Mavic Air 2 in to some bushes, and the Left Front Motor har damaged and needed replacing.
🆃🆆🅸🆃🆃🅴🆁 : / mortenhjorth
🅵🅰🅲🅴🅱🅾🅾🅺 : / mortensplayh. .
Check out 𝐌𝐲 𝐏𝐥𝐚𝐲𝐇𝐨𝐮𝐬𝐞 𝐥𝐢𝐭𝐭𝐥𝐞 𝐬𝐡𝐨𝐩 : www.myplayhouse.dk/shop/
" Be aware that the shipping prices is worst case, until it know where to ship to!! "
The Engwe EP-2 Pro 750W Folding Electric Mountain Bike
Link EU to Engwe EP-2 Pro 750W Folding Electric Mountain Bike : shrsl.com/3m8z7
Link US to Engwe EP-2 Pro 750W Folding Electric Mountain Bike : shrsl.com/3mcra
Link US - DJI Mavic Air 2 - Drone Quadcopter : amzn.to/3fefPi9
Link US - Other DJI Drones & Parts : amzn.to/3cgjXSA
Link UK - DJI Mavic Air 2 - Drone Quadcopter : amzn.to/3gUFCwj
Link UK - Other DJI Drones & Parts : amzn.to/3dLFoeo
___________________________________________________________________________________________________
/ myplayhouse
For 3$ a month, you get an extra weekly "What's UP" update video. Just for my Patrons. The Support I resave on patreon is all used on stuff to make interesting videos on KZbin.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time.

[@jfkastner]

Thank you for speeding up some of the video! I would not have had 14 hours spare time to watch it ;-)

[@MyPlayHouse]

You can always play the video in 2x,,, that way, I should only be ½ as boring.

[@jimholloway1785]

I am thrilled to see that you still have the Ifixit kit and it worked pretty well with repairing this drone. I know working with some things you need the very small screw bits and tweezers and plastic picks to safely pry things open.

[@MyPlayHouse]

The plastic tools in the Ifixit kit,, is great for not scratching the drone :-)

[@brinkrobertd]

This video was very helpful. I did the exact same arm replacement and it worked. Thank you!

[@MyPlayHouse]

Thank You SO much for telling me,, always nice to know I helped :-) and saved a drone

[@TravelsWithBert]

I just finished installing front arms on an MA2. For some reason one arm was quite easy whereas the other must have taken me 100 attempts before everything lined up correctly and I was able to insert the screw. One thing that helped was a small vise to hold the axle. It's necessary to put a half turn on the black plastic arm, and the vise holds the axle steady while you do this. I also put a little copper grease where the bottom pin goes into the small hole. Also, the arm needs to be pointing towards the rear of the drone, rather than in it's normal open position. (paul)

[@MyPlayHouse]

Hi @TravelsWithBert Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@johncockerham7410]

Thank you for this tutorial ! Great example of how to do this.

[@MyPlayHouse]

Glad it was helpful, and hope you manage as well!

[@qualitydirtmoving]

Thanks, you helped me a lot🙏😅

[@MyPlayHouse]

Hi @qualitydirtmoving Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@qualitydirtmoving]

@@MyPlayHouse 🫡

[@artursmihelsons415]

Great repair video! Nice to see drone up and running with cool shots at the end! 👍 Only I was a little bit scared in that moment, when You try to disconnect antenna wires with metal screwdriver near these 3 small SMD components on PCB for antenna.. I'm glad, that You didn't rip them off by accident, that will be a disaster!! But otherwise, perfectly accomplished job! 😉

[@MyPlayHouse]

Hi Arturs Mihelsons Thank You very much! I was also not happy about the amount of forces that I needed to use to get that antenna off,, glad you liked the video :-) Thank you for watching! :-)

[@dongayop9594]

Wow😊

[@MyPlayHouse]

Hi @dongayop9594 Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@Eo_Tunun]

I am absolutely with you about the bewilderment about the complexity of the design and the number of seemingly unnecessarily heavy parts of the drone. There is a load of potential for improvement there, and DJI would be well advised to make use of it before someone else does an nicks their crown as top producer of small high quality camera drones!

[@MyPlayHouse]

It might be okay,,, but also quite over engineered...

[@scetchport]

Spring loaded, something something....😂

[@MyPlayHouse]

Very hard to get that spring loaded arm on,,, just right, and not to brake anything more. :-)

[@thomasgilbert6924]

Hi, I was wondering if you have any tips for putting the arms on the front of the drone with the big splint. I have replaced the two in front, but I am having a lot of trouble putting the arms back together. The splint is what holds the arms, which is difficult and few in the way.

[@MyPlayHouse]

Hi,, I am afraid I only did this video because I had this issue,, and saw that there was not that many that had shared a fix. I only looked in to how to replaces the back arms.

[@skynetcybersystem3tech]

perfekt

[@MyPlayHouse]

Hi SKY NET CYBER SYSTEM 3 TECH Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@johnstouchpad6437]

1st, how did you make out with the APC ATS setup?

[@MyPlayHouse]

I have not put that one in production yet..

[@mihumono]

Were You charging some batteries during filming? There is some high pitch noise in the video.

[@mihumono]

Or did my ears just start ringing ;D

[@MyPlayHouse]

Okay,, that must be something I do not hear..

[@dodancs]

Not to be rude or anything, but you have forgotten to dress in the white antenna wire nicely on the bottom side. Previously (see 15:09), when you pulled it out, it was hooked onto the plastic bits sticking out from the case. It may be just a cosmetic issue, but may result in squeezed antenna cable? (24:06 you even mention that the antenna cable seems to be a bit longer, in 24:58 you can see you just pushed it away, not really where it is supposed to be)

[@MyPlayHouse]

Okay I see that I missed that!

[@lindseyjohn4789]

My drone flew into a very tall tree. Drone fell down and broke the rear left motor. All the props broken off as well. I ordered a new arm. I see i have a lot of work to do. I have a Dji Mavic Air 2 also. I also order the iFixit kit.

[@MyPlayHouse]

Best of luck fixing your drone! hope my video helps :-)

[@lindseyjohn4789]

@@MyPlayHouse I probally would like to send it to you for repair. I get my new left rear arm tomorrow. How much do you charg?

[@eprohoda]

hello. best sharing -see you later.

[@MyPlayHouse]

Hi Prohodaction Thank You very much! glad you liked the video :-) Thank you for watching! :-)

[@rschrader]

Have you ever published a KZbin Short? Maybe you could do some drone footage of the e-bike and post on KZbin as a Short. The e-bike company might like that enough to send you other things to test/use.

[@MyPlayHouse]

Thank You Robert,, the bike company is all appy with the first video,, It was just my pride,,, when I promises to do something,, I do really try to keep it. I do get nice offers to review stuff,,, said no to an electric skateboard just this week,, I did not think it would be relevant,, and I am just getting to old. You will be getting a sponsored video this comming week,, of something I asked to get to review :-)

[@trip_monkey]

Purpose of blue and yellow wire ?

[@MyPlayHouse]

Sorry I would not know :-/

[@trip_monkey]

@@MyPlayHouse TQ for the response

[@firatbacik182]

vmware esxi 6.0 server exists, I can't download it fully, teacher, I wonder why, how can I solve the problem? Logical processors 48 Processor type Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz Sockets 2 12 cores per socket Server This

[@MyPlayHouse]

Nothing I can do..