How To Replace an Arm on Your DJI Mavic Air 2 S

[@yashiro1800]

Educating the masses once again, keep it up gents!

[@gadijameyer9888]

Keep up the good work 🙌

[@thegreatbigco]

Bookmarked this! I know I'll need this someday when I get my Air 2s! :)

[@michaelb7686]

Thanks for posting. Can you list what type/size of screw drivers you needed?

[@shabs215]

Neat work as always. Good content👍

[@webuydronessa]

Thank you! Cheers!

[@r33gz]

This man doing the most...."fairly straight forward" 😂🤣

[@michaelwagner3161]

Great work as always :)

[@webuydronessa]

Thanks again!

[@Fabiohobby]

what soldering iron did you use mate?

[@AneeqaMeyer]

Keep it up 👏🏼

[@webuydronessa]

Always!

[@VJDave906]

I just replaced two arms on my Air S2, and the LEDs work just fine, but neither one of the motors do. I tested the motors, and they appear to be good as far as an impedance check. I even disconnected the wires, and hooked up one of the old motors that I knew still worked. In that motor wouldn't run either.

[@rafaelbrea6743]

Hi where can I buy the new arms Thanks

[@aeroshootstudios]

how much different is the air 2s compared to the air 2? just curios since i have the air 2

[@webuydronessa]

Very much the same the big difference is the camera and extra vision sensors , however, arms , Props, mid frame and a few other bits are the same .

[@aeroshootstudios]

@@webuydronessa thanks for letting me know Just incase I can't find parts for the air2

[@webuydronessa]

Always a pleasure, thanks for watching

[@prakashdrones]

Sir drone Assosiries how to buy

[@Trail_Heads]

It pays to be ambidextrous :)

[@greganwhittal]

Very informative

[@webuydronessa]

Glad it was helpful!

[@huasteca_drone]

Any idea why the arm doesn’t lock on folded or unfolded position? It stays at the “off”position like when you remove the hinge

[@Gabriel-hm3zm]

Do you find a solution ?

[@webuydronessa]

You need to remove the hinge in the arm open position and put it back the same way it came out , they are spring loaded .You can manually do this with pliers should it close but it's tricky.

[@ali-im9gn]

@@webuydronessai don’t understand i’m having the issue

[@etiennepequignot4870]

I’m having the same exact issue, and chance you could do a video showing how to manually put it back? Thank you!

[@webuydronessa]

@etiennepequignot4870 you need to cock the hinge into the right place before putting it back

[@chrisalba.v]

What was the cause of the engine being damaged like this?

[@webuydronessa]

It was in a crash which caused the damage.

[@chrisjoseph213]

15:04 "Look at them shiney new balls" 🤣🤣

[@InfinityDrones]

only advice I would give here is to rotate the video so that our perspective is correct.

[@kkeil9449]

Wow, much easier than Autel Evo 2 drones.

[@Bizon65]

Só faltou as luvas antiestática, nem uma pulseira usou.