DJI MAvic Pro How to replace the Gimbal Vibration Absorbing Board

[@erichouck3262]

I just followed your video. It took the scariness out of this repair. Thank you so much for the video.

[@SoIDoNotForget]

Glad it helped!

[@Swaizy]

Gracias Hermano! You saved me hundreds! I crashed my dads drone and the same exact thing happened to me. I won’t lie it did look intimidating but I followed your steps and now I got the board installed. 2 hours and 12$ spent instead of 200+ for another camera replacement or even new drone! Thanks again

[@oscarcoronel1020]

De nada!! I'm glad to hear that. Take care and have fun.

[@SoIDoNotForget]

De nada! I'm glad this video was helpful.

[@WilliamAmyot]

Thank you! I had to also replace the camera ribbon cable, and you made it easy!

[@SoIDoNotForget]

You are welcome! I'm glad this video was helpful.

[@RJDean-td9kz]

This was so incredibly helpful to pull my Mavic apart and replace the gimbal stabilizer. Thank you!

[@SoIDoNotForget]

Glad to hear. You are welcome!🙌🏼

[@AntonyLorenzo]

Very helpful! Could not have replaced my broken gimbal plate without this tutorial. Thanks!

[@SoIDoNotForget]

I'm glad it as helpful to you. 🙌🙏

[@mark-savage]

Thank you for taking the time to create this tut! You just fixed my drone!!

[@SoIDoNotForget]

Anytime Sir.!! I'm glad you were able to fix it. 🙏

[@draintheswamp9792]

Very good video. Had no troubles except my hands sweating ✋

[@SoIDoNotForget]

:) Awesome!!

took me 2.5 hours as I had to replace the gimball ribbon as well, but it was super helpful video, thank you!

[@SoIDoNotForget]

Awesome! Glad to hear.

[@josemanuelramirez4098]

Thank you very much for this video, i crashed my Mavic Pro and i had the same problem flying indoor, the dron touch the wall and go down. Chasis broken like your. Thank you but i am not sure to do it by myself, jajajaja, great job!!!!! greetings!!

[@SoIDoNotForget]

Your welcome!. With the right tools, I think you can do it. I was a little bit intimidated at first but I decided to give it a try and did it. It took me a little longer than the video though. :) God Luck!! Greetings!!

[@rjmccrickard]

Used this video to guide my repair today. Thank you for the help.

[@SoIDoNotForget]

Anytime!! I'm glad it was helpful to you! 🙏

[@goatlipsmcdroneface919]

Lifesaver - replaced my broken Mavic plate no problem with this great video. Thank you!

[@SoIDoNotForget]

I'm glad that this video was helpful. Thanks!!

[@jimmythomas928]

Thanks for your video! It was a great help in repairing my Mavic Pro gimbal vibration board! Very detailed and well done! THANKS!

[@SoIDoNotForget]

Glad it helped! Anytime!

[@colinloweg1ivg318]

Many thanks, great detail, this really helped me repair my Mavic Pro.

[@SoIDoNotForget]

Anytime!!!

[@RonKatz]

Thanks, I fixed mine! Note to others, not all the screws are the same length. You should keep track of what screw goes in what location. Also take great care plugging the ribbon cables back in.

[@SoIDoNotForget]

Awesome! Thanks for the tip!

[@PathogeniNk]

Great tutorial, nice work!

[@SoIDoNotForget]

Thanks!

[@rickyclack7698]

Thank you! Fixed mine by following this!

[@SoIDoNotForget]

Your welcome! I'm glad it helped you out.

[@richardstoof2566]

Fantastic! Thanks for this great explanation video.

[@SoIDoNotForget]

Your welcome! I'm glad it was helpful to you. 🙏

[@kesondrayton3755]

Thank You!!! This Video Helped Out A Lot!!! Was Able To Repair With Ease!!!!

[@SoIDoNotForget]

Anytime!!

[@r3beatty]

50 minutes. Thanks so much for the tutorial!

[@SoIDoNotForget]

Anytime!

[@kianp]

Thank you mate! Appreciated this video.

[@SoIDoNotForget]

You are welcome!!

[@GolfTesla]

I came across this video as I occasionally (note: not always) get heavy gimbal shake (sometimes with, sometimes without an "excessive vibration" warning) and that is absolutely useless for films for my Golf&Tesla channel (I use the drone mainly for my golf course reviews, views of Tesla superchargers from above, and occasional landscape footage). And I don't want to take the drone and camera/gimbal apart and if in any way possible avoid replacing any parts. - but thanks anyway. Your video is well made.

[@SoIDoNotForget]

Thank you! Good Luck with you projects!

[@omardelaluz3268]

Thanks for the video , I just prefer mine . Do you know if I can still use the drone when it’s broken ?

[@SoIDoNotForget]

If it is broken you won't be able to is fix.

[@caseylabelle1128]

Good job. Thanks brother!

[@SoIDoNotForget]

Your welcome!

[@kizomba2012]

Gracias 🙏🏾

[@SoIDoNotForget]

De nada!!!

[@julianbreg]

Very good instruction. Thanks a lot👌🏻 And also nice construction from DJI.

[@SoIDoNotForget]

Anytime!!

[@beckylps3489]

It actually worked!!!

[@SoIDoNotForget]

I'm glad! Thanks for watching my video!!

[@kizomba2012]

Just ordered mine from EBay DJI charge to much to replace a faulty part that just the slightest bit of a bump gimbal becomes inoperable 🤦🏾‍♂️ gracias Por su ayuda. 5⭐️

[@SoIDoNotForget]

Thank you!! 🙏

[@jessefritsch209]

Thank you 🙏🏻

[@SoIDoNotForget]

Anytime!!

[@M3GAOfficial]

The links you shared shows how to change the ribbon but your video shows changing the black plastic piece. Does it mean there is no ribbon on the new attachment?

[@SoIDoNotForget]

That is correct, it is sold separately. I only needed to change the absorbing board, the ribbon was in good condition. The reason why I included the links on the descriptions was as a gratitude since I learned from them.

[@khalidhalabi8487]

Excellent Video!

[@SoIDoNotForget]

Thanks!

[@ajbali2418]

Great video. Thank you.

[@SoIDoNotForget]

Anytime!

[@Mr.lifeXpression]

Where can I get those screw drivers

[@SoIDoNotForget]

Amazon or HomeDepot.

[@rubencorreia974]

Thank you, it helped to repair mine

[@SoIDoNotForget]

Your welcome!!

[@dansebestyen9956]

Does this tutorial also work for the Mavic pro platinum?

[@SoIDoNotForget]

I'm not sure to be honest.. They are pretty similar.

[@TriniWeekes]

great work

[@SoIDoNotForget]

Thank you!!!

[@TriniWeekes]

@@SoIDoNotForget very helpful

[@omardelaluz3268]

Hey what size is the hex key ?

[@Swaizy]

Like the smallest 😂 it took me soo long to find it

[@SoIDoNotForget]

They sell it in a set of 5 different ones.

[@omran_tk]

Hi, thank you for your tutorial, very useful! I've followed every step and it seems that the gimbal works perfectly. I see video signal, I can even change the camera settings (like shutterspeed, ISO etc.). Unfortunately when I want to connect through the DJI app, I get the following message in the DJI GO 4 app: "Gimbal cannot receive main controller data" and "Gimbal and Main Controller disconnected. Contact DJI Support if it persists after restart". I can't fly the drone and I don't see the battery status, compass status etc.. I did everything: downloaded the app again, reconnected the main controller, used different USB cables on the controller, updated, restored and refreshed the firmware with DJI Assistant 2 software (all these options fails at 24%) and move on.. What could it be? Please help me, I'm so frustrated.. I had plans to make cinematic video's in Norway this August.. :(

[@SoIDoNotForget]

Hello, hum sounds like is a different issues that is unknown to my knowledge. I might try to contact DJI as this might have different troubleshooting ways to fix it. I know the feeling, I hope you can find the answer.

[@omran_tk]

So I Do Not Forget I've found the problem! It was a damaged flex cable that is connected from the gimbal to the main board. There was a hole in it.. I've damaged it while replacing the absorbing board.. The flex cables are very very fragile. So people: be extra careful, because mine was broken! I'm gonna order a new flex cable.

[@SoIDoNotForget]

@@omran_tk I'm glad that you were able to find the solutions and share it with me and who ever see this video. 🙌🏼

[@michaelcorcoran3225]

Can you show me how to replace the spring hinge on the right front arm of my mavic pro

[@SoIDoNotForget]

Unfortunately not sure how to do that. I'm pretty sure other channel will have that tutorial. Sorry I wish I can help you.

[@MrBerenguer67]

Hi thank you four your video I have a Mavic Pro and now is Said remove the clamp the camera is hoverloding what you thing it is thank you very much

[@SoIDoNotForget]

I hope you were able to find a solution.

[@danieljohnson8494]

I keep getting a error that said that gimble clamp is overloaded. any ideas

[@SoIDoNotForget]

No sure to be honest. I wish I can help you.

[@danieljohnson8494]

@@SoIDoNotForget thanks for the quick response. It looks like it's common for the ribbon cable that goes to the gimble to get damaged. I found one on Amazon for 12 dollars I'm going to givr it a try

[@SoIDoNotForget]

@@danieljohnson8494 Awesome!

[@mikeoxlong9403]

@@danieljohnson8494 did it work

[@danieljohnson8494]

@@mikeoxlong9403 yeah ribbon cable fixed it. I’ve changed mine twice now just be careful when you put it in. It’s kinda a pain in the but job. Things you do for your drone 🤣

[@SoIDoNotForget]

If his video helped you. Please consider to subscribe as a thank you. I need to reach 1000 subscribers.

[@mohssinemallouly]

line plz

[@SoIDoNotForget]

🧐

[@TomislavKoren]

I had to concentrate harder because every time you said "boom" there was immediately "Crazy Russian hacker" in front of my eyes. And I cannot see him fixing drone. Boom der yu go may frend. Boom ders anodr an.

[@SoIDoNotForget]

I hope you were able to fix your drone!

[@TomislavKoren]

@@SoIDoNotForget Yes, of course. Instructions are so detailed that you cannot miss anything. Thank you!