DJI Mavic Pro RC Controller Calibration, Fix Spinning, Yaw Issues

[@daithiod]

I see you’ve got 8 thumbs down and can’t fathom the reason why. A clear, concise, and pleasantly presented method to solve a problem. I thumbs you up 👍

[@MarionvillemodelsMultirotors]

Sadly with KZbin a thumbs down is as good as a thumbs up. It’s all interaction.

[@ClanMoran]

Thanks Ricc. I was trying to calibrate like an Inspire or Phantom and couldn't get a finish. Big Cheers for this.

[@MarionvillemodelsMultirotors]

I was like that to so thought it best to do a video making it clear.

[@philippevidal6336]

You are the best, even for me listening Scottish accent !!! Merci

[@MarionvillemodelsMultirotors]

Philippe Vidal glad you can understand me.

[@williesmall1052]

Hi When I calibrate my dji controller the gimble control doesn't complete. I can follow the circle to the left and then to the right fine but it will not move on from there the the calibration complete any ideas

[@Alpha6.31]

Very helpful, thank you. But what about moving the sticks over the other lines in the squares, vertically, horizontally, diagonally? Not necessary?

[@MarionvillemodelsMultirotors]

No need. You just showing what the full extent of travel is to the controller.

[@ringleverimages]

wanted to thank you for a very in depth video tutorial on the mavic pro. I was wondering how could I purchase one of your yellow controller bracket bracelet to keep the secure when storing I'd love to buy one. thanks

[@freekyreeky97]

hey Rick good update. Could you tell me how i can get hold of those stick bracket from your friend Ian ??? Would like to get one thinks its brilliant idea. i life in Spain . Hope to hear from you soon.Thx

[@MarionvillemodelsMultirotors]

FREEKY Reeky he downloaded the file from Thingyverse and printed it.

[@JeremyWesleyBR]

Thanks for this. I downloaded the file and uploaded to a shapeways and should have one in a few weeks. Brilliant! Thanks so much!

[@RCMadness360]

Question Anyway to fix a uncentred controller stick I dropped mine

[@MarionvillemodelsMultirotors]

You would need to open it up and have a look. Sticks use magnetic sensors so would assume one has come loose.

[@RCMadness360]

@@MarionvillemodelsMultirotors thanks for the information

[@RCMadness360]

@@MarionvillemodelsMultirotors I tested it and it was luckily fine nothing is wrong with the controls luckily

[@thealphamale7982]

Thanks for the videos. Have found them very useful. Looking to get a mavic by the end of May. What care plan would I get if I bought off you?

[@MarionvillemodelsMultirotors]

Alpha hi. We offer a full knowledge back up and service. There is the DJI care which covers you for accidental crashes. This is £99.

[@terryandteresa]

This morning my mavic wouldn't decend. When it did finally start to defend it was very slow like it was auto landing speed but 400 ft up. After a few stick up and stick down inputs it stared defending normally but only till I let off the stick, then it did the same thing again. No response then slow responce then normal responce. Is a rc calibration going to fix this?

[@fotografiabogota]

Hello mi Stick is not function correctly when you push to top its only to 19% so the dron cant take off help me please

[@MarionvillemodelsMultirotors]

James Tobar have you run a stick calibration.

[@GolfTesla]

thanks for this. well explained..

[@FLYJLM]

You helped me dude ; thx a lot , regards from St Tropez ☺☺

[@MarionvillemodelsMultirotors]

FLY JLM I’m glad it helped you.

[@michaelkaplan604]

Hello, great video! Would you have any experience and or recommendations for an upgrade mod for the controller that would extend the distance capability? Such as ite-dbs02.2 (dji mavic pro edition).

[@MarionvillemodelsMultirotors]

Michael Kaplan I can't comment on any mods on range extending as we have very strict rules in the UK.

[@pvsheridan]

Hello Rick: I am thinking of buying the Google Nexus 7 which is actually the NEXUS7 ASUS-2B16. But my general question is connectivity...how does one connect the Mavic controller to a display...that is, what is needed on the tablet, etc.?

[@MarionvillemodelsMultirotors]

Android can be a bit hit and miss. I get alot of craft it with issues of connectivity and in most cases its the android device. IOS is always spot on. For connecting larger devices you use the usb charge cable supplied with your device and plug into the base of the controller.

[@rpigontv5990]

Good day sir what happen my dji mavic pro after i crash they fly forward too much slow i dont know why

[@MarionvillemodelsMultirotors]

Recalibrate the IMU. It may be confused of what’s level after the crash.

[@MrBerenguer67]

Hi thank you four your Exllent video just a question can you help me I try to calibrate my remote control from my Mavic Pro Platinum is bleeping and I try to move the stick and is not working any advice thank you very much

[@MarionvillemodelsMultirotors]

abel berenguer do you defiantly have it in the calibration mode.

[@overfly_pt]

Very good 😉👍🇵🇹

[@dankearney8012]

I've tried to calibrate the controller today with no success. Every time I do it the left stick shows 4 or 5% on the lower section (where thumb stick would pull straight down) Because of this I never get the option to finish calibration,it just says done. When I click that I get calibration failed message. Any ideas?

[@MarionvillemodelsMultirotors]

I know some have had genuine issues with the controller. Try getting someone else to calibrate it as static in your body may affect it. Worth a go.

[@dankearney8012]

I haven't had a chance to fly it yet. Hoping to get it up shortly. You think it should be safe enough to fly?

[@MarionvillemodelsMultirotors]

+Dan kearney it's a tough one. You should be ok. If you have any issues hit the return to home.

[@dankearney8012]

Ok thanks for the reply. I'll give it a go I think.

[@TheJoel1964]

excellent !!!

[@MarionvillemodelsMultirotors]

Rahaf Tech - Yoel Robert Assiag thank you.

[@MrBerenguer67]

Done thks

[@SCCFORUM]

HI Ricc, When are you due to have them in stock? Regards Paul

[@MarionvillemodelsMultirotors]

There dribbling in just now but all pre ordered. If it think we will have free stock till January.

[@uptowndisco2]

Let me know if mine dribbles in lol

[@MarionvillemodelsMultirotors]

+uptowndisco2 will do. Hopefully today.

[@theflyingwelshmang6716]

im off to see if this has worked for me later on, ive got a creeping yaw to the right on hover hmmmm

[@MarionvillemodelsMultirotors]

theflyingwelshman g good luck. Hope it works.

[@theflyingwelshmang6716]

@@MarionvillemodelsMultirotors nope......unfortunately it didnt work for my mavic pro, still bloody creeping right on yaw whilst hovering!! grrrrrrr driving me insane lol

[@MarionvillemodelsMultirotors]

theflyingwelshman g I take it you have calibrated the compass.

[@theflyingwelshmang6716]

Marionville Multirotors compass and imu

[@JamesAustinTrickShots]

theflyingwelshman g have you solved? Having the same problem with my mavic pro

[@WiltshireMan]

Thanks for the videos Ricc, they will be very helpful. All I need now is a Mavic on which to practice:) Patiently waiting Sandy (That idiot from Swindon Wiltshire)

[@MarionvillemodelsMultirotors]

Your welcome.

[@ed_richards47]

Hope you've got your Mavic by now. This is another Swindon maniac still awaiting delivery of his baby, lol.

[@dhansel4835]

I'm new and have DJI Mavic 2 Zoom. I was doing a point of interest video the other day. When my Mavic 2 finished the 360 circle I stopped the recording but still had the point of interest settings on the screen of the tablet. How do I get back to flying mode? I have been landing and taking off again to reset the tablet.

[@MarionvillemodelsMultirotors]

D Hansel click on the controller icon on the left that should take you back.

[@dhansel4835]

Thanks .... I'll give it a try...

[@lunarlouie]

Controller wont turn off any solutions?

[@MarionvillemodelsMultirotors]

Un plug the battery in the back.

[@blackrainb0w]

Anyone else having problems calibrating the joy sticks to zero? i have 4% on the right and 3% on the left. No gaps in the outline, also have the latest firmware for the mavic pro. Is there firmware for the joy pad as well, that i don't know about?

[@K8URChannel]

Just got a MavicPro and a Samsung S2. Needed to watch KZbin just to find a work around for initializing Controller. (Boot S2 AFTER Controller and Drone are ON) Now, doesn't want to Calibrate Controller sticks. (Times out before Cal is finished). Jeeze...! I'm an electronics engineer and Commercial Pilot. No Joy yet!

[@MarionvillemodelsMultirotors]

K8UR Channel try using an iOS device and see if that works.

[@fandydhar]

i want the bracket please... where to order?

[@MarionvillemodelsMultirotors]

You need someone with a 3D printer to make it for you.

[@jecbosch]

tx again..:)

[@-Bigjordan]

will this work on the Air?

[@MarionvillemodelsMultirotors]

Jordan yes it should be the same.

[@terrymcgrath1937]

Could you help me with a problem please

[@MarionvillemodelsMultirotors]

Terry McGrath hi. What’s your problem.

[@freekyreeky97]

hey Rick thanks for the quick reply. Could you put me on your list for 1 bracket please. if i send you the adress in N-Ferriby Eng. and the money. when would you think you could send it. ??? i will be in Ferriby from 28 nov till 9 dec. Thx again. for quick reply.

[@TheJoel1964]

DJI Mavic mavic 2 Pro RC Controller Calibration ?

[@MarionvillemodelsMultirotors]

Rahaf Tech - Yoel Robert Assiag will work in the same way.

[@Shalaco]

0:00 Add Text!

[@MarionvillemodelsMultirotors]

Shalaco yes small editing issue.

[@SKYDRONAUTS]

Thanks Ricc. Had a minor issue with mine, but since doing this calibration, all is good again! PS, enjoy the controller sticks guard :) Ian skydronauts.uk

[@MarionvillemodelsMultirotors]

Thats good, yes very much like my stick guard.