Dji Mini 3 Pro - BMS Connecting - Battery modding CP2112 + Battery Killer link in description.

Dji Mini 3 + Dji Mini 3 Pro + Dji Mini 4 Pro - battery BMS firmware mod with CP2112. Battery Killer app/Battery Repair Tool app.
Those tool is easiest way to repair Dji battery with "death flag".
1. Battery Repair Tool drive.google.c...
2. Battery Killer drive.google.c...
3. CP2112 from this video buy Link pl.aliexpress....

[@mydrone4043]

안녕하세요... Unseal에서 계속 에러가 발생합니다... 영상을 보면 용량 읽고 쓰기가되는데 저의 경우는 안되고 있습니다. 순서가 정확하게 어떻게 되나요 알수 있습니까 ? 감사합니다. 아니면 다른 무엇가가 더 있어야 하나요 ?

[@chinhh.q.7855]

Hi! mini 4 pro battery: " error unseal". read information ok. help me. thank!

[@moskil2]

Sadly, all new DJI Mini Pro 4 batteries are locked by DJI with a new access key. This means a new hex key is necessary for unseal, and it’s not available yet. :(

[@michaelfarley9938]

Please keep us in mind if you find out that a new key for the mini 4 pro becomes available. Thank you.

[@bishalscreation]

What is this process for. Is it when original battery shows error? But how does the battery malfunction?

[@moskil2]

Its for battery repair or for cell replace for bigger capacity

[@jjrteclados]

Olá daria pra atualizar o firmware por essa placa? bateria original, mas que o drone não reconhece como original? obrigado

[@nbngoc93]

I have this error, can you help me? " Could not perform SMBus read 0x21"

[@marciofn71]

Só o video já dá para entender o que o amigo está fazendo, não precisa nem falar nada...Muito bom. ok.

[@RadeeshaSriyananda]

Bro i need a small support. I purchased aliexpress same quality dji mini 3 two batterys. One battery came a cell error msg. I try to killer software like this do. But unseal came error. I cant unseal. That battery not a original battery second quality battery. Can i support to wake up my battery because cycle cout 0. Never used battery

[@moskil2]

It could be different with a non-DJI battery, but a new DJI battery is in hibernation mode and cannot be connected via CP2112 coz data/clock pins are not powerd. First, you need to charge the battery. During the initial power-up, the battery will wake up. Then, insert the battery into the drone and attempt to fly. If you receive a message like ‘NON DJI BATTERY - UNABLE TO FLY,’ it is a serious issue. In that case, you can try updating the battery firmware.

[@johnnywalker5066]

Thanks bro for the no bs download link. 👍🏼👍🏼

[@Lavdeapea]

Bro pls post a screen recording of what u doing on the computer it will be very helpful 😢

[@moskil2]

This video demonstrates how to connect the battery to a PC. In the video, I’m not doing anything special; I’m simply reading information from the firmware and performing the ‘unseal’ operation on the battery

[@edgardopadilla9109]

Hola qué tal me puedes ayudar con el siguiente error por favor al momento de leer valores de capacidad me dice que primero tengo que first,you need to unseal and fast the chip

[@moskil2]

You have to click "unseal" before you change anything

[@aem8025]

Apakah ini baik untuk di terbangkan dengan drone kita , setelah batrai di modifikasi ?

[@moskil2]

yes

[@marciofn71]

Good morning friend, does this process work with parallel battery or only with original DJI battery? Thank you

[@moskil2]

can be parallel if you use 2s2p cause you need ~7,4V

[@marciofn71]

​@@moskil2 I'm from Brazil!! Thanks for the feedback.

[@internaman]

Where is the narration? I’m not sure of what you’re doing.

[@moskil2]

xD, but what kind of narration do you need? This video only demonstrates how to connect to the DJI Mini 3/4 battery, read battery information, and unseal the battery. If you can connect, read the info, and unseal it, then you’ll be able to modify your battery.

[@Sevillano82]

¿Con esta aplicación puedo modificar la capacidad de la bateria y cuando la conecte al dron que lea esa capacidad nueva? Muchas gracias

[@moskil2]

Yes you can

[@masbroo9707]

​@@moskil2how reset cycle count

[@panichchuaykum8469]

I did it and couldn't solve the problem. dji mini 3 pro cp2112 chip, original battery.

[@moskil2]

But what problem are you trying to fix? :p

[@panichchuaykum8469]

@@moskil2 The battery doesn't charge on the charger, but I've seen that the battery's cell count drops more than 3.8. Try giving it a boost and then put it in the charger to see if it can charge. (I tried to reset the battery but couldn't, it gave an error)

[@moskil2]

@@panichchuaykum8469 U could not reset FAULT flag or charge if cells are unbalanced, in that case u should charge them to same voltage by external charger (cell by cell) then try to reset flag by clicking Connect - Unseal - Unseal 2 - Clear PF - Clear PF2 - Reset Chip.

[@panichchuaykum8469]

@@moskil2 Thank you. I'll try it out.

[@User-jr7vf]

Where can I buy these wires?

[@moskil2]

Sry, I don’t know. I used some wires from an old PC power button or something like this

[@BKP-qj8od]

The download link is not working

[@moskil2]

I just checked it, and it’s working. Click on the link, then in the upper right corner, click the download icon (underlined arrow). Wait for 30 seconds, and a new window should appear. Google Drive is slow in this case, but the file won’t be deleted in the future.

[@chinhh.q.7855]

Hi! I'm can't unseal/flag: "unseal error" . read infor ok . battery dji mini 4 pro battery, flew 5 times. help me. Thank