DJI Mini 3 Pro Broken Gimbal Repair [ Change Only The Broken Pieces ]

DJI Mini 3 Pro is easily Brake the Gimbal When Crashing. You no need to change the whole gimbal because Mini 3 and mini 3 pro is easy to repair the gimbal. Change what you think is broken.
Cheap Aliexpress Link:
- Mini 3/ Pro PTZ CableTester : s.click.aliexpress.com/e/_opo...
- Gimbal Ptz Signal Cable for Mavic 3/Mini 2/Air/Air 2/2s Mini 3 Pro : s.click.aliexpress.com/e/_DEq...
- Mini 3/ Pro Full Set Gimbal : s.click.aliexpress.com/e/_EvR...
- Mini 3/ Pro Gimbal Roll Arm Lower : s.click.aliexpress.com/e/_DD1...
- Mini 3/ Pro Gimbal Cable : s.click.aliexpress.com/e/_DDD...
- Mini 3/ Pro Wing Protector 35G: s.click.aliexpress.com/e/_DEj...
- Mini 3/ Pro Wing Protector 25G : s.click.aliexpress.com/e/_DEL...
- Mini 3/ Pro Landing Gear : s.click.aliexpress.com/e/_Dma...
- Mini 3/ Pro Sticker : s.click.aliexpress.com/e/_DeC...
Feel Free to Contact Us for more Information about Remotely Fix 40011 and 40021 for all Mini and Air Models.
Telegram : t.me/djisolutions
Whatsapp : [phone]

[@thomasblade5303]

I am seriously in awe...I don't leave YT comments very often but had to make an exception. I crashed and had the EXACT same damage. I thought I was gonna be toast. I found this video and was able to follow along and take my drone apart and order the replacement parts. Thank you SO MUCH. if anyone else is reading this and has the same broken arm HAVE. NO. FEAR. IT IS FIXABLE!!! I found the parts on Amazon..little priceier than Ali but comes in two days. I used an iFixit pro toolkit with the metal spudger. one not - BE CAREFUL when removing the top shell. the GPS unit is right inside and has a fragile ribbon cable. THANKS AGAIN!

[@djiSolutions]

You're welcome, thank you for your lovely comments 😍

[@tfire1349]

Hi man, can you please provide me the Name/Reference of the pieces you bought to repair it , on amazon please ? Is it about 40$ ? Have a nice day

[@kirill8893]

Man I crashed my drone (little birdy) yesterday. This video gives me hope!

[@helrysbalko287]

Hello friend, fantastic your tips, following them there is no mistake. I did the procedure as explained in your videos, it worked perfectly, I am forever grateful to you and your content. As for users who are in doubt about the tips, I recommend everyone to do it in the explained way so that there will be no errors. Once again, thank you very much and you already have a new subscriber on the channel attentive to your tips.

[@guillaume6590]

Wow, thanks bro! Exactly what I was looking for. Hats down 🙏

[@djiSolutions]

Glad it helped!

[@773alonzo]

Thank you, i actually fixed it with sharp tweezers, not dental floss...but your video gave me the push and idea i needed

[@djiSolutions]

Glad I could help!

[@Donald007man]

Thank you sir. This was exactly what I was looking for & saves me $$$! Earned a sub

[@djiSolutions]

Thank you

[@normandgamelin2680]

Thank you for this video, :)

[@felipealexandre11]

Muito obrigado, aqui do Brasil

[@djiSolutions]

Thanks, I love Brazil football ⚽

[@Bob.Stoddard]

Thank you!

[@djiSolutions]

You're welcome!

[@maroskara5027]

Hi Thx for sharing video of fixing gimablal. Wher do I get spare parts? Any advise? Thx

[@timothyfrederickchurch81]

Do you think my camera gimbal is ok if I forgot to pull the black padding in the back of the camera when it was new while turning it on? Are the motors ok?

[@casdessers9105]

Hello. My left gimbal arm is broken (the one without the cable attached to it). How do you recommend to fix it? Take it out completely?

[@helrysbalko287]

Hello friend, once again I would like to thank you for the content, my question is regarding my drone's gimbal, I replaced the Flat Cable but it didn't work, it makes the movement when it starts, rotated up and down, but the Pan and Control Tilt does not work and the control does not recognize it, the image is working normally, what could be wrong? Is one of the engines not working? thanks again.

[@riyantofficial4826]

Thanks for tutorial Next pleash repair dji mini 3 pro board off

[@djiSolutions]

Yes we also have video of replace main board. kzbin.info/www/bejne/l4GugWWLdpZkorc

[@TZARTOSCHRISTOS]

The point where the camera clips onto the motherboard gets very hot. As much as my finger can't stand it. I guess it's not normal. And the gimbal sometimes makes a grinding noise in some places. There are explanations for all this.?

[@JamesLima]

Nice vídeo! In the video you didn't remove the roll motor (03:23). I need to remove it because the connection broke, but I can't find a video on how to remove it. Can you please help?

[@thegreatones9176]

If my gimbal Bracket is broken but everything else seems to be fine, when I reinstall the new bracket like you did in this video should everything work fine?

[@djiSolutions]

Yes every will work fine, no error.

[@happilyevercapture.]

Them wheels on the side of that bracket is what's broken for me and I don't know what part to get.... So when you look at the drone head on at the front on the right hand side..... The gimble had separated from the side? Do you know what I'd need to order to fix?? Thanks in advance 🙏

[@ramadhanputrajaya]

Hello there, is that DJI Mini 3 Pro's Gimbal (Camera area) can swipe to DJI Mini 4 Pro?

[@djiSolutions]

Unfortunately not

[@blackmoouth]

Tengo Dji mini 3 normal y en un accidente dejo de funcionar el gimbal pero funciona la cámara.

[@djiSolutions]

Chat to me

[@ianxtreem]

Nice video! Do you have a store to sell the parts?

[@djiSolutions]

Check AliExpress

[@zibist3639]

Hi I have mini pro 3 and need to replace this part too... Do i need to connect drone to pc any calibration after replacing? Thanks for answer You doing good job here on yt Greetings ffom Sweden

[@djiSolutions]

If you replace just that part, it no error. But if you replace any motor, it will have error 40011

[@user-tv9bu8sf9v]

Good day Do you know which part I need to replace if I have a compass and IMU error?

[@djiSolutions]

Better Whatsapp or telegram. It many things to check

[@captainsustain]

Read before disassembling! Nobody mentioned that you need to buy new rubber bands to reassemble the gimbal. My rubber bands have trimmed tails that allow them to be installed during gimbal assembly. As a result, I was waiting for the delivery of the broken part, replaced it, and now to put it back together, I need to order rubber bands again, on which the gimbal attaches to the body, and wait for delivery again. Make sure these rubber bands have not been trimmed, or order them right away, or disassemble without removing the rubber bands from the body.

[@jankowalski-fq5ib]

Hello. Do You know where I can buy gimbal shock absorber for DJI Mini 4 PRO?

[@djiSolutions]

AliExpress

[@flash159159]

Is it possible to only change the lower axis bracket, without disassembling the entire gimbal?

[@djiSolutions]

Yes you can, but you can break the cable easily, it nt worth it.

[@DashFlicks]

there are white dots on the motors where are these suppose to point? front?

[@djiSolutions]

Sorry I don't know which dot 😁

[@sarah-lawrence]

I hit the gimbal in my DJI mini 3 and it tells me error code 10001, downward vision sensor error. I'm not really sure what that would be to fix. Do you have insights about what I'd be looking for if I took it apart.

[@djiSolutions]

Down sensor hardly problem. Try to clear the Len of the sensor

[@dronebynikk]

Price kya hey gimbal ki

[@elishahodgson1635]

Hey, Great tutorial, very helpful. My mini 3 makes a rattling noise when I shake the camera, any idea what could be causing that? I don't get any errors and everything still works so I'm reluctant to open the camera since I don't have any of the thermal compound and the connector looks super fragile. Thanks

[@L.isbonn]

Showw

[@andypalmer7529]

Hi, Thank you for the video tutorial. I am going to replace the gimbal assembly ( without camera, the camera is still ok but the gimbal does not respond ) I am told that if i purchase the gimbal assembly it needs professional calibration and to not purchase it if I do not have access to the esoftware to not purchase it. Are you able to help with calibration to my Mini 3 pro if i buy the replacement parts ?

[@djiSolutions]

Yes it can remotely fix. Telegram or Whatsapp me

[@mayshadowcat]

Hi! I crashed my mini 3 Pro and now the "camera" is shaking and buzzing. The video and movements are working just fine. I can fly with him and even make some images, but then the camera starts shaking for no apparent reason and then stops and repeats (It also happens when not flying, sometimes it shakes and sometimes it doesn't). I removed everything to see if something was loose, but this hasn't been solved. I don't know what part needs replacement to solve this, can you help me, please? OH, also, not getting any error messages.

[@djiSolutions]

First to replace is the gimbal cable because it is the cheapest then if it not working, you can change the gimbal

[@sousarogers]

After replacing the cable or any of the motors do I need to make a calibration on that program on the?

[@SupplyVibes26]

What made you where gloves ? Should I ?

[@djiSolutions]

Lolz without gloves is much easier but I just want to make the video more standard.

[@chuy310507]

After replacing a motor, does it need a calibration software or is it just plug and play?

[@djiSolutions]

You need to calibrate

[@manishranabhat7289]

I have mini 3 pro and the gimbal it make noise. How could i fix that? Appreciate your help.

[@djiSolutions]

It can be the cable or the motor, you have to find it

[@manishranabhat7289]

@@djiSolutions do I need to change the whole gimbal or just the part?

[@salvatorpreteli6829]

Any experience with error 1d020001?

[@benzzmedia1135]

i have it, my drone gimbal/camera doesnt work at all after this repair

[@njf9763]

The rubber came off mine. Code 1D010002. Also what tool kit you using for this?

[@benzzmedia1135]

what was the issue? i have the same code and my gimbal and camera work work

[@briandeines5019]

I hit a tree going up and it crashed... dumb me wasn't looking. Since then I get "gimble stuck" or "gimble overload" sometimes. other times it works fine. nothing is broken that i can see. what should I do? thank you for the video.

[@djiSolutions]

you should teardown your gimbal and clean it. if it not work, replace the gimbal. gimbal stuck and overload it mean the gimbal motor is not working properly.

[@sentosa_K]

Where to get the software to calibrate the gimbal after replaced?

[@djiSolutions]

It depends on what error number you get. Contact me with telegram for more information.

[@studiozoom9501]

Hello, Thank you for your videos. my drone dji mini 3 pro recently fall. and the gimbal was stuck. error showing 1D010002. How to fix this issue

[@djiSolutions]

Video will be release soon 😁

[@sunroameroverland]

@@djiSolutionsalso waiting for that one. Hhit branch and now code 1d010002

[@youssefsk9234]

Do you have the Video pls?

[@vedmarth]

Can you do this without removing the gimbal?

[@djiSolutions]

Yes you can if you have magic 😂

[@icaromaciel4013]

Great tutorial, but.. seriously, don't try this.. not worth it. Its complex. I ended up breaking the gimbal rubber, it is difficult to take it off and f** hard to put it back... and now I have to wait this new piece be delivered.. Btw, I bought this same part to repair, "Gimbal Roll Arm Lower", and it is much heavier than the original one. Not sure, but this can became a future problem, by forcing the gimbal system.

[@kaiwissmann6073]

Bro you just have two left hands😂

[@ACanofHopePodcast]

I just had a collision and had this accident happen and yeah for $419 just buy a new one save yourself the headache in fact I think I'm just going to upgrade to the mini pro 4

[@Creole876]

I just crashed mines. So i know it can be replaced

[@djiSolutions]

Yes and it easy too

[@dayanali1345]

Hello Bro I have an error for gimbal but the code is different (1D010002) Please tell me what I can do to fix that

[@djiSolutions]

Telegram or Whatsapp me, you will need other firmware to fix that problem

[@Joe-wk9ow]

I crashed my drone while doing a roof inspection and now there is a hum in the gimbal. When I got home I noticed a small crack forming on back of the gimbal arm. I'm going to do the swap tuesday and hope that the hum goes away. Other than that the gimbal still works fine.

[@djiSolutions]

If it working well, you don't need to change anything, just using like that.

[@Joe-wk9ow]

@@djiSolutions the reason I am doing it is because there is a hum in the gimbal And a crack in the housing that goes about a quarter of the way around. Much rather be safe.

[@zibist3639]

I have a little crack and it makes horrizont little awry (about 5%) Is it possible to calibrate it or i must change arm?

[@Joe-wk9ow]

@@zibist3639 is your arm cracked? Do you mean the gimbal arm or the arm connected to the props?

[@zibist3639]

@@Joe-wk9ow 😆 not mine arm... gimbal arm has litle crack it works fine but when film far horizont is little awry...

[@abhi7264]

I crashed mr dji mini 3 pro and gimble is not moving and its shows black screen

[@djiSolutions]

Good, replace everything

[@baduyortiz9422]

Hello, Fantastic video!! Thanks Question, I was trying to fix the gimbal and camera of one of my Mini 3 Pros by testing them on my good Mini 3 pro and now the camera is not working. It doesn't show the Camera SN and all camera information on my phone when connected to the RC-N1 controller shows nothing, the Gimbal works perfect, try. Do you know a solution to fix this? I can't find one!!

[@djiSolutions]

Check the cable connect with camera, it should have video and what error you get?

[@baduyortiz9422]

@djiSolutions Thanks for your reply. I did check the cables a few times, and they look great. I get no video or can take photos. I get the imu 40021 error, but I do a calibration and the error disappears. But still doesn't work. It's the original gimbal, cable and camera. Everything was working fine.

[@djiSolutions]

Try to change the cable. If it still the same, change other camera to test it.

[@djiSolutions]

You can change the camera first because it is easier.

[@baduyortiz9422]

@djiSolutions I did that and still didn't work. Also, try the original cable with the other camera and it didn't work. For some reason, the Camera SN is not showing. I'm going to try to go to a previous firmware, but I doubt that I would be able. I have the latest firmwares.

[@Carlos_Tito]

Help me please. I have an error navegation system and don't let me fly 😭

[@djiSolutions]

Check this video: GPS Signal Weak Unable to Take Off | Replace DJI Mini 2 GPS Module kzbin.info/www/bejne/lX7Qdnmjjat_hc0

[@Carlos_Tito]

@@djiSolutions error 40011 😭😭😭😭😭

[@Jensen-C]

ya 1 thiusand percent im paying someone to do that lol

[@djiSolutions]

Mini 3 and mini 3 pro is easy, I sure you cAn do it, break 2 - 3 gimbals, you will become expert 😂

[@harisjurgsat6509]

For mine drone error 1D020001 😢

[@djiSolutions]

You will need software to calibrate. Telegram us

[@sonistudioakbarpur5551]

Hello help me contact num send me part kaha milenge

[@djiSolutions]

Sorry I don't sell spare parts