FIXED Broken Gimbal After Crush Hard DJI Mini 3 Pro

DJI Mini 3 Pro is easily Brake the Gimbal When Crashing. You no need to change the whole gimbal because Mini 3 and mini 3 pro is easy to repair the gimbal. Change what you think is broken.
Cheap Aliexpress Link:
- Mini 3/ Pro PTZ CableTester : s.click.aliexp...
- Gimbal Ptz Signal Cable for Mavic 3/Mini 2/Air/Air 2/2s Mini 3 Pro : s.click.aliexp...
- Mini 3/ Pro Full Set Gimbal : s.click.aliexp...
- Mini 3/ Pro Gimbal Roll Arm Lower : s.click.aliexp...
- Mini 3/ Pro Gimbal Cable : s.click.aliexp...
- Mini 3/ Pro Wing Protector 35G: s.click.aliexp...
- Mini 3/ Pro Wing Protector 25G : s.click.aliexp...
- Mini 3/ Pro Landing Gear : s.click.aliexp...
- Mini 3/ Pro Sticker : s.click.aliexp...
Feel Free to Contact Us for more Information about Remotely Fix 40011 and 40021 for all Mini and Air Models.
Telegram : t.me/djisolutions
Whatsapp : [phone]

[@cinq_580]

Thanks for this quick video without spoken words. I risked it and successfully fixed my gimbal. Small tip for the other people’s who want to try: if you have the dumping cushions without the rubber extansions you should order a pair. It was impossible for me to replace the cushions. The new pair had extansions like in this video. Other tip: you should replace the little lid (6:25) as early as possible before replace the camera at the gimbal.

[@fuadhirmas]

Motors have rotation limits, how do you know how to put rubber suspension back in the right holes? Regards.

[@alexandraacreator-art]

Hi, great video! I can't reach Aliexpress to buy gimbal from Sweden. Do you have any other online shop suggestion with suitable parts?

[@djiSolutions]

Sorry, no

[@KoloRa]

best service, no questions about that. Thank you!

[@djiSolutions]

Great to hear!

[@pdxdiyer]

Thanks for the great videos - they are really helpful! Questions - do all the gimbal motors always move during the power up checks or if one is not moving freely does it not try the next motor? Do you have a video showing what is supposed to happen when the Mini3 Pro does its power up gimbal self check? Thanks!

[@djiSolutions]

Yes it will move all motor when power on. The problem can be cable it motor. You have to find it yourself

[@mischasolaris]

Thank you for the great videos you do! Do you experience in this : I also have an error 1d010002 after a crash. Replaced cable, replaced motors. Upon startup, I can feel the motors are doing some tension, but releasing later. Video is there. All Axis are easy to move. In-App calibration failed, DJI Assistant calibration goes through but does not help.

[@danicavalencia9392]

Hi, have you tried fixing gimbal overload error? My drone’s camera is shaky and I guess it was because of that error. I tried calibrating the gimbal but the error still persists after many tries of flying my drone. Any advice will be appreciated.

[@absolutewandererpankyy5037]

Can you repair Dji air 3 gimbal? If yes please tell the pricing & everything for this

[@dreamstep1983]

I am from India, My DJI mini 3 pro drone crashed no power coming to the drone since the crash. Camera gimbal is broken...Why is the power not coming? Will it cost a lot to repair the gimbal? Do you have to change everything? Plz sir give me your suggestions...

[@djiSolutions]

It will need cost a lot to change gimbal, if know how to replace gimbal yourself. It will cost cheaper. About no power, check ESC or battery.

[@EngineersAcademy9204]

Hello there ! I am Not able to Connect my RC & Aircraft on Mini 2, Kindly help

[@djiSolutions]

There are many reasons that it not connected. It can be remote and it also can be the drone. I so hard to tell.

[@rayfushagood3766]

I fixed, but the camera still wont rotate up or down. Do i have the manual recalibrate it?

[@odinata]

And you aren't going to show us how to snap the side gimbal covers back on?!?!?!?!? Bad choice.

[@djiSolutions]

It very hard to do it in video

[@MyMerten]

👍👍👍 Thank you !!!

[@s3quatro]

Help! I have gimbal stuck error Error Codde 1D010002 how to fix please???

[@alperenyorulmaz6670]

Did you fix your problem I just got same problem today

[@s3quatro]

@@alperenyorulmaz6670 i'm not

[@s3quatro]

@@alperenyorulmaz6670 Problem solved today, change Gimbal Camera signal Cable PTZ!

[@mushy_GLX]

I have the same problem and after spending some time on and off to drone I did realise that roll motor needs replacing. Out 3 other 2 motor works fine. So its either roller motor or cable. I went on the cheaper option. If its not motor then I will replace the cable since other 2 works fine. Hope it helped? Motor only cost me £2.35 inc delivery from Ali express, should be with me in about a week. 🤞🤞

[@guillaume6590]

Hey, I have Error 40003, and can't go through the calibration process. Seems stuck around 85%,and tells me it can not calibrate, try again. Any guess? Thank you

[@djiSolutions]

It mean your gimbal still not working properly

[@guillaume6590]

What could I do then? I changed the yaw motor + signal cable. Kinda lost 😅

[@user-vg2rq8fy7p]

Hi, any tips on how to not break gimbal rubber when assembling? I cannot place/shoot it without breaking it.

[@djiSolutions]

Replace it, it will make our life better 😂

[@drone990]

Preciso de um reparo no guimbal di mini 3pro. Vc far? Sou di Brasil

[@user-mh7ks5tv1h]

Hello, I crashed my drone and need your help. How can I contact you?

[@djiSolutions]

Check in the description

[@milafreitas725]

Muito Show, perfeito

[@djiSolutions]

Thanks

[@cyjohnston6300]

What size screwdriver do you use

[@djiSolutions]

I never know before there only few 🪛 I use. 😂

[@Izzy.rtr.13]

Hola como estás Quiero comprar una cámara nueva para mi dji mini 3 pro

[@djiSolutions]

You can change camera but you will have error 40021 and 10016. Error 40021 can remove but 10016 can't remove.

[@Izzy.rtr.13]

@@djiSolutions que me recomiendas? 🙏🏻

[@nighthd8852]

On my controller it says gimbal stuck and the camera itself does not work. It just a black screen.

[@djiSolutions]

Replace the cable first, if it still the same replace the gimbal, because cable is cheaper.

[@nighthd8852]

@@djiSolutionswill that fix the black screen aswell?

[@djiSolutions]

@@nighthd8852 the black screen is the cable and the Camera

[@nighthd8852]

Thank you

[@lemac420]

I have gimbal error 40027 how to fix please

[@djiSolutions]

Calibrate your gimbal, it will gone. My next video also solve that error too. Next and see

[@lemac420]

@@djiSolutions i cant move the camera with the control and i have error 40027

[@caalinAbyan]

Power system hardware error (code 30210 )

[@tauriqmustapha3505]

Check your ESC board or could be one of the motors. 100% one of the following.

[@caalinAbyan]

@@tauriqmustapha3505 how to check

[@djiSolutions]

Yes you are right, I think better change ESC board, if motor problem it will have ESC Error.