This was just what I was looking for and it give me exactly what I needed to successfully replace my broken arm shaft on my DJI Mini 4 Pro! Very inexpensive and fast solution.
@sciencebygabrawy19 күн бұрын
Awesome! Glad it worked out perfectly!
@AMGA45S2B9 күн бұрын
Broke mine ! 😢 thx so much 😊
@ConversasAleatoriasPelaEuropa2 күн бұрын
Thanks for the great video! Very helpful! 👍🏼👍🏼👍🏼👍🏼
@jonathonlazar68652 ай бұрын
Thank you, I have the 2 year dji refresh but just bought the mini 4 pro two days ago and this hinge broke. Cheap fix without having to send it in. Great tutorial on how to to do this 👍
@sciencebygabrawy2 ай бұрын
You’re welcome! Less hassle for sure!
@TheGrueSlayer16 күн бұрын
Thanks for the Video.
@ShermanPics8 күн бұрын
This is a video I’ve been looking for thank you. I just got my DJI mini 4 Pro. I ran into the wall. I just disabled the obstacle guard😩 Thank you.
@sciencebygabrawy5 күн бұрын
Something I do way too much lol. Glad it helped!
@ShermanPics4 күн бұрын
@@sciencebygabrawy I followed your easy and simple instructions to replace the arm shaft axis hinge. I’m 🆙 and running now. Thanks for your advice and guidance 🙏🏾✊🏾🙏🏾
@LuigiGuevara20 күн бұрын
thanks mate, now I know what do I have to do
@sciencebygabrawy18 күн бұрын
Glad I could help!
@TFLSTUDIO882 ай бұрын
Thanks for this!!! My refresh packages just ran out and i had already resigned myself to buying a new one. But i think i'll give this a go first! hope it works as smoothly as it looked in this video! Thanks again!!
@sciencebygabrawy2 ай бұрын
It will it’s easy trust me! You’re welcome!
@westsideraullopez5 ай бұрын
Thank u. Great video 👌👌
@sciencebygabrawy5 ай бұрын
Thank you Raul!
@DroneFilesYT2 ай бұрын
2:48 “you can’t SCREW UP” lol no pun intended😂😂
@sciencebygabrawy2 ай бұрын
lol
@kurtiscaАй бұрын
AWESOME video, thanks so much for sharing!
@sciencebygabrawyАй бұрын
You bet! Thanks for watching!
@BravestDawg1012 ай бұрын
Holy hell you have steady hands, trying to get those screws in without a magnetic tip was a nightmare for me. At one point a screw fell down the little hole where the wires come out, spent a good 10 minutes shaking the thing to get it out lol. Regardless, thank you very much for the video, I was really worried when it first broke, but less than $15 for a repair and we're back to flyin!
@sciencebygabrawy2 ай бұрын
Yep! A bit stressful when you’ve just spent a good amount of money only to break soon after! It’s great knowing there’s plenty of replacement parts out there. Thank you and happy flying!
@88pepino2 ай бұрын
Just broken mine! Tried to take of from an uneven surface… Luckily seems not too bad. Thanks a lot! 👍
@sciencebygabrawy2 ай бұрын
Most welcome!
@digitaldee112 ай бұрын
Thanks ✅keep up good work
@sciencebygabrawy2 ай бұрын
Thank you!
@champikadp2 ай бұрын
Thank you so much just got it fixed thanks to your video.
@sciencebygabrawy2 ай бұрын
You bet bud! Happy flying!
@arboriste_87554 ай бұрын
Thanks for this video ! 😊🤙
@sciencebygabrawy4 ай бұрын
You bet!
@mohammadrasoulfard-habibi3066Ай бұрын
Absolute legend
@sciencebygabrawyАй бұрын
🤣🤣
@andrewperry83892 ай бұрын
Thanks for the great video and helpful tips
@sciencebygabrawy2 ай бұрын
You’re welcome!
@Jacek_BАй бұрын
Thanks ❤❤
@sciencebygabrawyАй бұрын
🤙🤙
@D8Droner-xj5tg5 ай бұрын
Thanks for the very informative video❤❤❤
@sciencebygabrawy5 ай бұрын
You bet D8Droner!
@D8Droner-xj5tg5 ай бұрын
@@sciencebygabrawy ❤️👍
@inairstudios5 ай бұрын
that looks so easy to fix
@sciencebygabrawy5 ай бұрын
Yep so easy!
@Alhusam16 күн бұрын
What a professional and fast job! Unfortunately, my new Mini 4 Pro broke its front right wing in exactly the same way. Sadly, one of the cables attached to the propeller was also cut. My question is: where can I get the original replacement part for that triangle? Thanks, everyone.
@sciencebygabrawy15 күн бұрын
Oh man! Sorry about That! Well in the DJI app, I believe you can purchase anything. apps.apple.com/app/id899147555 But I just use Amazon to be honest. Everything’s there and available. Good luck!
@Alhusam15 күн бұрын
Actually, I have already got that. Your video was very helpful and informative regarding that issue. Thanks.
@user-hf2fj8wz8c3 ай бұрын
Man you saved my day!!!
@sciencebygabrawy3 ай бұрын
Go get ‘em bro!
@cameragodvisionary2 ай бұрын
Great instructional video, I just have one question: if the broken arm isn't lighting up and calibrating upon startup (like the other 3 do) does this mean that I also have damage with the wires as well? Or will replacing the shaft acid hinge fix this issue? My arm is hanging out more than the damaged one in the video.
@sciencebygabrawy2 ай бұрын
Thank you sir! So unfortunately, it sounds like you got a wire issue at hand. There’s always a chance that you could repair the cut wire without having to pull apart all the body shell pieces but if you do have to remove more, I would write down the steps you take being your first time so you don’t forget anything! Btw new arms come with new wires and they’re about $100. Good luck!
@NicManGun5 ай бұрын
I really wish somebody would make an upgrade kit for those cause they break really easy
@sciencebygabrawy5 ай бұрын
Yeah. Maybe there’s just not at big enough market yet. I’ve been really trying to remember to switch back from sport mode to normal mode when the drone is no longer in an open wide space. You just forget sometimes in the midst of all the fun lol
@NicManGun4 ай бұрын
Yea, that’s what happened to me, I lightly ran into my vehicle and it fell 4’ and broke… upgraded axis arm hinges and custom Kydex clip on pieces for the arms and body would make it still really light but extremely strong. I might just buy the materials and do it myself.
@lincolnikedaАй бұрын
Muito obrigado!! Eu quebrei esta peça do meu mini3.
@sciencebygabrawyАй бұрын
De nada my friend!
@NovaEastCoastАй бұрын
Perfect video thanks. Now to get the chain saw out and pay that tree back jk. 😗
@sciencebygabrawy28 күн бұрын
lol 😂
@NovaEastCoast27 күн бұрын
@@sciencebygabrawy Just did the first test flight! All Good! Thanks again :) The rest of my holiday is now back on track.
@eadjh98Ай бұрын
Thanks for sharing, just broke mine a couple of days ago , any ideas where to purchase a new Axis hinge please? Subbing to your channel 👍
@sciencebygabrawyАй бұрын
Sorry to hear that! Thanks for the sub! Here’s the link for what I picked up from Amazon. a.co/d/9bDIcsz
@michalralu5 ай бұрын
Are the sockets into which the screws holding the arm spring are screwed in, plastic or metal?
@sciencebygabrawy5 ай бұрын
Thankfully metal screws into metal sockets!
@michalralu5 ай бұрын
Thank you very much for your reply! I have one more question - when you move the front arm by the presser foot front and back (unfolded, of course), can you feel a slight loosening?@@sciencebygabrawy
@sciencebygabrawy5 ай бұрын
Yes maybe a little. And now this totally makes sense Michal thank you! In the video I said everything looks great but now that I’m really thinking about it, that axis hinge does seem slightly less powerful than the other side. I mean it’s all made in China, idk. I guess the bright side is that, when it comes to flight performance, it shouldn’t make any difference. If you’re wondering if you should buy original DJI parts, I’ve looked through the DJI phone app and all they have are replacement screws and propellers. My go-to is Amazon lol.
@michalralu5 ай бұрын
@@sciencebygabrawy One more question - does this slight loosening occur on the repaired arm or both? Where the arm meets the body?
@sciencebygabrawy5 ай бұрын
No, just the repaired one because the axis hinge is an after market part and not necessarily made by DJI. Did you already replace the axis hinge and the new one feels loose? If you’re having issues with the repaired arm being wiggly or loose, maybe purchase a second axis hinge. If the new one feels tight, you could take the other axis hinge and return it.
@iamshredder35876 сағат бұрын
Awesome. Thanks man. I was worried I broke it after just a couple weeks owning it and would have to send away for lengthy expehsive repairs. This is much better. 😀 Question: is the back legs a different looking axis hinge that i shoild probably order now in case i break one? Thanks again.
@Alhusam9 күн бұрын
Hello everyone, the transmission cable of my Mini 4 Pro was severed in a crash that also broke the arm shaft axis hinge. What is the best solution to resolve this issue, and can my drone still operate without repairing it? Thanks.
@sh3llbac4 ай бұрын
NICE !!!!
@ItzJasonJustin8 күн бұрын
I messed up bad…. I damaged the screw in the arm and it’s the one I need to take out to put the shaft on… the screw is damaged and won’t come out so I’m unsure of what to do now…😢
@sciencebygabrawy5 күн бұрын
I’m sure you’ve seen those KZbin videos where they put rubber band between head of the screw the screwdriver to help get some traction. Another idea, and this may be way too aggressive, but there’s always the option of using a screw extractor. You know the screw that you drill into the screw, where the threads spin in the opposite direction. Sorry man! Let me know how it goes!
@ItzJasonJustin3 күн бұрын
@@sciencebygabrawyyes I have tried the rubber band and that didn’t work and well the part where you screw a hole in the screw doesn’t work for some reason I’m not sure why I used a corded drill and it’s powerful so I’m not sure😢
@user-nh5xt4mw4w16 күн бұрын
Just flew into some power lines and did exactly this. Identical broken axis hinge. Did the epoxy method work instead of full replacement of the axis hinge? Will try that temporarily while i wait for the replacement part.
@sciencebygabrawy15 күн бұрын
So I did end up using epoxy on the broken triangle piece, but I never used it because I just ended up installing a new one. So I never really got to test the one that I epoxied together.
@ItzJasonJustin14 күн бұрын
SAMMEEE THE WIND AND LOW BATTERY MADE ME HIT THOSE DANG LINES
@user-nh5xt4mw4w13 күн бұрын
@@sciencebygabrawy I just went ahead and tried the epoxy method. The super glue stuck the plastic back together and I have placed the axis hinge back into the arm in its original position. Have flown the drone once without issue however I believe if I pull that arm in the wrong direction when folding it out then it will likely break the axis far more easily again. In summary the epoxy method works but I dont trust it long term so I have ordered a replacement piece anyway in case.
Have a question, did you use any thread lock or Locktite for the screws, if so which do you recommend? Just curious if the vibration from the motors can make the screws vulnerable to coming loose without some sort of thread lock. Thanks.
@sciencebygabrawy5 ай бұрын
I’ve never been worried about any screw that can be tightened down snug but I’ve thought about this question a lot because I recently bought a pack of knock off propellers hoping to save money. When they’re screwed in snug, the propellers won’t spin, so I’m forced to back off the screws a bit. I know sounds like a really bad idea. On several occasions, upon putting the drone away, the propellers would just come off and I’d wonder how did they not fly off during the flight. Anyway, for parts that are not being constantly replaced, like arms and stuff I think it’s a great idea! But I personally am replacing propellers all the time because I like to do a lot of various stunts and maneuvers lol. Well, my worry is after a while that locktite will eventually gunk up the inside of the screw socket from so many propeller replacements. But for arms and that kinda thing? Awesome idea! I don’t think it would hurt a thing!
@JMegliorino5 ай бұрын
Thank you for the response, I just replaced the left arm yesterday, tightened down all the screws, and flew it. Seemed fine but will check them prior & after each flight to ensure they’re tight. Thanks!😉✌️
@sciencebygabrawy5 ай бұрын
Wow! Pretty big job replacing the entire arm! Makes you think twice about using sport mode huh lol. I love sport mode lol. But about rechecking your screws a few times- Good plan for sure!
@jordanfolkard40092 ай бұрын
I managed to snap one of the arm screws leaving a piece of the screw stuck what's the best way to remove it
@sciencebygabrawy2 ай бұрын
I’ll tell you but please use ultimate caution and precision. Use the smallest finest punch and punch a dent in the center. Drill with the absolute skinniest drill bit you can find down as far as the screw goes. Drop a drop off lithium grease to loosen. Put the punch back in and gently wiggle it out. Good luck.
@rubelahmed33775 ай бұрын
Camera Lens Error 1C000310 please tell me how to fix it
@sciencebygabrawy5 ай бұрын
Hi Rubel, I’m sorry you’re having this issue. It’s more common than you think, even right out of the box with the mini 4 pros. I hate to be the bearer of bad news, but there’s a good chance that you’re gonna have to send it in to DJI to have it repaired. 1C000310 and 1C000317 are common error when there is a loose connection between the camera lens and the board. You didn’t do anything wrong it’s totally a manufacturing defect. Now, there is something you might want to try before you send it in. There’s a small chance that a simple software reset will do the trick. If it works, it wasn’t a loose connection. A five minute software reset or update is always worth a try. Good luck Rubel and let us know what happens!
@chizama411024 күн бұрын
What would you recommend of one of the screws is stripped
@sciencebygabrawy22 күн бұрын
Well, if it were my drone I’d epoxy the head of my screwdriver to the head of the screw. Then wait 24 hours. Then I would spray a very small amount of WD40 or lithium grease down the threads. Then I’d try backing off the screw. I don’t know if you have a better idea but anyway good luck!
@Wilcox933 ай бұрын
what would you recommend if a few of the wires are torn in half too? asking for a friend
@sciencebygabrawy3 ай бұрын
I mean, if the break is in an easy spot to solder, obviously you could solder them, if you can isolate each one and not melt the plastic sleeves etc. honestly, I wouldn’t spend more than 15 minutes trying. If he can’t get it I’d just order a new set online, but you’ll have to take the whole thing apart, unfortunately.
@andrewperry83892 ай бұрын
😅
@jacobotha83494 ай бұрын
How to get the arm screw out if you striped it
@sciencebygabrawy4 ай бұрын
Sorry about that man. With these small screws, stripping one makes it a lot harder. I saw a video of someone glueing a screwdriver to the stripped screw head with epoxy. After a day, he was able to back it out. Any other ideas guys?
@ryaldeveau62992 ай бұрын
Such a HORRIBLY weak point!
@sciencebygabrawy2 ай бұрын
Yeah lol. Gotta keep your weight down. Maybe flexible joints is a good innovation for the engineers to come up with
@ryaldeveau2072 ай бұрын
@@sciencebygabrawy they could of at minimum used glass fiber reinforced plastic instead of just thin plastic connected to a chunk of metal...
@explorewithvaly2 ай бұрын
Indeed .. I just broke mine
@champikadp2 ай бұрын
It a good design IMHO, I just broke mine and got it replaced thanks to this video pretty easily. If the hinge was stiff arm could of broken (at least with situation I had to face) which would be harder and expensive to repair.
@AddiersMunoz2 ай бұрын
@@champikadp Good point
@bhanuprasaddadi37394 ай бұрын
If you don’t mind can i get the link of the product
@sciencebygabrawy4 ай бұрын
Sure thing! ZWLLKJGS Mini 4 Pro Drone Front... www.amazon.com/dp/B0CJ964VPP?ref=ppx_pop_mob_ap_share
@pedaldoabencoado3 ай бұрын
Oull
@generalmeyer3154 ай бұрын
I cant get that last part to pry out
@sciencebygabrawy4 ай бұрын
Yep, yours just must be much tighter. You should probably be able to get pliers in there, right? Needle nose pliers maybe.
Ok my dji mini 4 pro broke down and i am ordering part so i will come back here once i have received the parts and will fit it up in my drone. Then i will give you the second comment. I hope this will work with my drone too. 🥲
@sciencebygabrawy2 ай бұрын
It’s good for pilots to work on their own drones as this gives them a better appreciation for the engineering that goes into it! It’ll work bud!