I have just brought myself a DJI Mini 4 pro and I'm in love with it. It's the first drone I've ever flown or owned, and I can confidently say it's one of the easiest remote control anything I have ever used. This thing is so responsive to the sticks and you can refine the touch in settings. I would have no problem at all recommending the mini 4 to anybody. The only downside is the price, but you do get what you pay for and so far no complaints 😎🚁👍
@strangerheremyselfza9 ай бұрын
Your transitions and color grading is spot on. Well done. 🎉
@robinhannevig9 ай бұрын
Thank you 🙌
@terry.stafford10 ай бұрын
Flying over people also requires prop guards which still puts the Mini 4 Pro over weight. It's a non-starter. Cat 2 and 3 are also not ready for prime time. Cat 4? Airworthiness Certificate? Uh, no.
@swcblad9 ай бұрын
prop guard will disable those sensors
@psi-ops13975 ай бұрын
Not only overweight, but it is way less stable in even 5 mile per hour winds. The stabilization still functions, amazingly well actually. But in the scenerio which I tested the DJI branded prop guards, my aircraft went from flat and stable with zero movement, to lifting side by side 3 to 4 inches in a swaying motion. Useless IMO.
@xrphart911710 ай бұрын
Thanks, great video👍greetings from The Netherlands🌷
@robinhannevig10 ай бұрын
Thank you!😃🙌
@Jerimo197810 ай бұрын
What an amazing review, thanks for the tips!
@robinhannevig10 ай бұрын
Thanks a lot!🙌🔥😃
@LAP105010 ай бұрын
Great video👍. I agree with you on how the M4P is affected by sustained windy 🌬️conditions. Just this week I was flying VLOS over a small pond in a 15mph +/- wind and found that the drone was struggling when I wanted it to descend from an altitude of 100 ft. At times it ascended even though I was on full stick descend mode. Kinda made me a bit concerned thinking the drone was not receiving the signal… Any thoughts or suggestions would be appreciated.
@robinhannevig10 ай бұрын
The descent can be affected by the sensors, especially over water even if the water is still but the wind heavy, just like flying over water with no wind but bigger waves. I always turn the sensors off when flying over water at a low altitude 👍
@Moscizwysokosci10 ай бұрын
Amazing shots! You are really good 😊😀
@robinhannevig10 ай бұрын
Thanks a lot 🙌😃
@NildoScoop10 ай бұрын
Light pollution reduction filter. It reduces the yellow light at night. 😉
@robinhannevig10 ай бұрын
Ye i figured😅 thanks tho!
@DangerousDaveKincaid8 ай бұрын
Hi Robin, great informative video... I really love this Mini 4 Pro drone.. I have a question when you record are you filming in 4K 30pfs or 60pfs. I was filming in 4K 30fps over the weekend and found the footage to be somewhat jerky. Maybe 60fps would smooth things out. Also I normally get Freewell filters but they were not available at the time so I purchased Skyreat filters. Have you ever used them. Not sure if maybe the filters are the cause. My son also has the Mini 4 pro and he was filming with no filters and 60fps and his footage looked better. Can I get your thoughts? Thanks Dave.....
@robinhannevig8 ай бұрын
The jerkyness is due to project frame rate mismatch. I always shoot 30p
@Makenboshi8 ай бұрын
also a first time drone owner, what is the advantages shooting in 30 over 60, other than the smaller file size? and under what conditions 60 fps is advised? @@robinhannevig
@AsgardStudios10 ай бұрын
Fantastic edit!!
@robinhannevig10 ай бұрын
Thank you 🙌🙌😃
@j-i-m9 ай бұрын
Hi Robin, I had the mini pro 4 on active tracking at the beach at about 2 meters high and 3 meters in front of me, as I started walking towards the water, it was flying backwards, as soon as it over the water, it started to descend, it must have lost me or something, I got scared and ran towards it, as I was closer to it, it rose again. What is the safest height to fly over water so it doesn't go for a swim? I'm also headed to Hawaii soon so any advice is greatly appreciated, thanks, Jim
@robinhannevig9 ай бұрын
Turn the sensors off if you’re flying close over water👍😊