DJI MINI 4 PRO - You NEED TO KNOW THIS!

[@DMProductions]

Get DJI Mini 4 Pro Cinematic LUTS here - dmprovisuals.com/products/dji-mini-4-pro-luts

[@charlesdove1345]

Got these 10/10

[@JohnRocker340]

Live in the states, will these work with cyberlink?@@charlesdove1345

[@martinambler3774]

With your LUTS. How do you use in Capcut for example. Thanks

[@KryptosChain]

*Wow Darren, that's amazing! So much time has passed that they've released Mini 4! I've still got the Mini 2 from back when I initially watched your channel. I'm happy to see there's a major improvement with the Mini 4 though. I tried flying the Mini 2 in the countryside with a hill blocking my range so I only got about 700 meters before I lost it completely and it activated RTH. I wonder if Mini 4 can handle it better*

[@KryptosChain]

*Btw, that altitude restriction has also been removed on the Mini 2 in the latest firmware update. I got the option to extend it above 120M*

[@richiehall8784]

Being a newbie in the drone world I'm really glad I've come across this channel, I'm finding the videos and all the information extremely helpful, thank you!!

[@tintifax8056]

A good summary of important questions and answers about the DJI Mini 4 Pro. Thank you for this video.

[@DMProductions]

Very welcome!

[@DAXimusTT]

DJI have definitely considered the thermal performance of the M3P. Three ways to tell, the drone will enter an "ECO" mode if left on for prolonged periods. This turns off obstacle avoidance sensors, gimbal motors etc. Next the unified ventilation behind the camera and gimbal combined with the spaces through the rear chassis allows easy airflow through the aircraft.

[@dereksmith9448]

Thank you for answering so many questions in this video oh and the new mini 4 luts are brilliant !

[@DMProductions]

Happy to here that!

[@ImpartiallySpeaking]

Do the custom ND Filters take the weight to 250g or above?

[@MountaineerFPV]

I placed my preorder already for the Mini 5 Pro 😂😂😂👊

[@paulshanesmith]

Annoyed to find my M3P filters didn't fit my new 4 but pleased to find you can upload directly from the SD card without turning the drone on. My biggest concern is the 120m setting as each winter and summer I fly a lot in the Alps, always a lot lower than 120m of terrain but often probably higher than 120m from me.

[@BlairAir]

They limited per EU rules, then removed it (for now, since it isn't required yet) Scary part is they did it OTA -no Firmware install required.

[@Matanumi]

@@BlairAir it was probably on the fly app

[@BlairAir]

@Matanumi @Matanumi if so, there was no App update either. Philip Skraba covered it in depth. He claimed it allowed 500m with the disclaimer with no updates done on his Controller, Aircraft or App. Just the ability to use the slider up to 500m. kzbin.info/www/bejne/g5PQpmmKasybgdUsi=AKYXGAFwd4wG9DtX

[@mysticalive]

I have flown well above 120m with it. They've lifted it (for now)

[@wrx202]

I have the same issue but the other way round. I live on top of a cliff edge with a sharp 250m drop. I tend to fly my drone down along the cliff walls to capture sunsets etc. My concern is that should the drone lose signal and start the RTH sequence how will it distinguish where the 120M flight height starts? If it goes up 120M from it's current location it will definitley not be enough to clear the cliff walls resulting in the loss of the drone once the batteries drain from it being stuck stationery in one spot. This EU law is stupid imo, one should just have a disclaimer claiming responsibilty if they fly above 120M as it was before. It shouldn't be a difficult thing to control since now we will have remote ID etc

[@mozzyquodo5532]

This answered exactly what I needed to know. I have the rc pro for my mavic 3, needed to check if it could fly the mini 4 pro. Thank you muchly.

[@DMProductions]

No problem 👍

[@Nicovibesss]

Great video! I got a question (might be a stupid question haha). I've had a mini 2 for almost 2 years now, and I am going to upgrade... Should I go for Air 3 or the Mini 4 Pro?

[@yoshy2628]

If your fly area is windy and the weight is not an issue - Air 3. If drone weight is an issue and on your flight path it's not windy - Mini 4 pro.

[@darren990]

so your thinking about buying pro 4 ..what else do you need ie licence, test ,training for the UK ???

[@Johndada517]

I just bought a mini pro4 my firmware up date was 1800mb then 800mb then 400mb took 8 hours had to plug in my done and the controller the drone got way hot so before it got a problem i put a fan on it and it cooled right down

[@stevetomblin9007]

Im new to this drone thing.. what are the changeable filters for?? Pic/video quality?? Is the camera no good without a filter attachment??

[@femiomomo4467]

Is the lens made of glass on the mini 4p?

[@Gordonbanksapp]

Another Mini 4 question: If you create a Waypoint plan, do need use the same takeoff location when reusing that plan in the future?

[@jimbernard3289]

I've heard other KZbinrs saying yes you do.

[@Gordonbanksapp]

@@jimbernard3289 Maybe Darren can clarify my question. My testing showed that you could takeoff at a different location and fly to the first Waypoint and complete the Waypoint plan. Maybe there are limitations of getting to saved flight plans. Clarification?

[@Hat_Uncle]

Flight plan turns off object avoidance. I'd say no.

[@RealLifesJourneyBecomingPinoy]

thank you

[@danewesterdahl3451]

Hmm. I'm a bit concerned and confused. I was going for a mini 4 as a travel drone since less than 250g. Bui i think i heard you say air 3 was ok in Europe. I don't want hassles, and cost difference is nothing. Whick should i go for? Is ce rate important ?

[@amit-dunsky]

The Integra Goggles firmware V 01.04.0000 and the MC2 firmware V 01.06.0000 had just added support for the Air3. This means that either the Integra and the MC2 supports O4, or better yet, and as expected, the Air 3 offers backward compatibility to O3, which in turn suggests the the same is expected with the Mini 4 Pro, and potentially any future O4 based drone.

[@SannahGavlen]

HEY kislux I have been watching you for years and im so proud of where you have made it! I love you so much! Also thanks for making my day

[@jeffrey3205]

Can I do mapping? How does the photo images compare to the Air3?

[@Marc-th9xw]

Not until they release the SDK for it. It took 11 months for them to release it on the M3P. Maybe as they're so similar it will be a quick release this time but who knows, I just bought a M3P for that reason.

[@Danny_Roman.]

Hi is the goggle 3 compatible on the mini 4 pro

[@olabergvall3154]

Just to add, in case people are wondering; no, the 120 m restriction won't come to *all* sub 250g drones. Only the ones that take advantage of a C0 classification, which are Mini 2 SE, Mini 3/Pro, and Mini 4 Pro. Other drones will fall into the legacy category, and without a C0 classification, there's no reason to impose that restriction. Also, the same applies to C1. Any drone that is released on the market in the EU after 1/1 2024 however, will have to have a C classification, otherwise it cannot be flown in the open category and A1/A3 airspace.

[@Ad_Alta]

Can I clarify that if you own a non-C labelled

[@olabergvall3154]

@@Ad_Alta You will not "escape" it, at least not on paper. Those drones will be able to fly in "A1 restricted", however I've yet to find a definition of what that is. Also, legacy sub 250g drones can only fit in this category if they have a declared MTOM of 249g or lower. No drones carry this declaration that are not C0 already. Therefore legacy sub 250g drones will only be allowed in the A3 category. On paper, that is.

[@rjrotermund]

Sorry for a stupid question, but why is it so important to avoid the weight limit to register the drone? Is it difficult? Expensive?

[@adamfrisby4462]

Curios. I just purchased the mini pro 4 fly more combo plus. First thing I did when unboxed was weigh it with the supplied battery in. It weighed 291grams. Does this mean my scales are faulty or would this be correct. Also does this mean I need to register it or something, which I did not want to have to do hence buying this model. Are you able to explain for me please. thanks in advance.

[@chesleyrenater6158]

If I was to take my mini 4 pro to Germany will I need a portable WiFi connection? Thanks

[@DMProductions]

no you can fly without Wifi

[@chesleyrenater6158]

@@DMProductions okay thanks

[@irelandshistoricalspots2993]

Do you think the Air 3 will get the same active track features as the Mini 4 Pro?

[@bigdazza001]

Hi mate. What about the props? Are they the same and interchangeable please?

[@كاميراالعندليب]

My dear friend, greetings a question : Can I rely on this mini 4 drone in terms of high-resolution video quality? Please be honest in your answer

[@jamesmartin532]

Interesting that they currently do not offer the Mini 4 as a 'drone only' purchase! If I had an Air 3 I would be quite aggrieved that I would be forced to buy it with a controller I don't need...

[@michaelbellomo1705]

Exactly the situation I am in. I recently purchased the Air 3 and I would love if DJI would offer the "drone only" purchase. I would love to have the sub 250 gram addition being I live by an airport. The new controller works amazing and I have had no connection issues at all.

[@Matanumi]

The whole new O4 causes them to not support old systems.... All because of that 5.2 band....something autel already did for a long time

[@dougmacmillan1712]

I almost bought the Mini 3 Pro. I'm glad a waited. I think Santa may leave a Mini 4 Pro in my stocking this Christmas.

[@don_tpanic6052]

I have another question. Does mini 4 pro batteries work with mini 3 pro. It is lighter, so you can a rig your drone a little bit, keeping weight under 250g

[@ApolloPTT]

Do you know if version 4 can measure better the altitude while flying on water, compared with version 3? Have not found anyone testing this.

[@meanderingmarnochs]

Can your luts be used on a mobile phone?

[@2104mpi]

Do you know the difference of the two products? All Day 6Pack and DJI Mini 4 Pro Bright Day 6Pack?

[@JJ_Khailha]

In a court of law it would be difficult to argue over a couple of grams of weight having weighed a drone in the field. How accurate are the scales? Were they calibrated? How were they calibrated? What surface was used to place the scales on? Was the result within a range of error? Was the weighing procedure carried out in accordance with a protocol and can it be shown that it was done correctly? Were there any other factors that could have led to an erroneous result?

[@ipythe68]

I have the original mavic mini so this will be a massive upgrade for me great channel 👍

[@DMProductions]

ah huge upgrade yes !

[@f13dfx]

I’ve decided to hang on to my Mini 3 Pro as I mainly use it for nighttime video/photos of city skylines when I travel. Reason being is that it still has the very last firmware before DJI added Remote ID!

[@leadsled213]

Sounds like it's your very last drone, also.

[@Matanumi]

He can buy mini 2s

[@CanadianHGHLNDR]

Question I have for dji: I own the Integra/Motion2 controller with my Mini 3 Pro, DJI just recently updated the Integra/motion2 to work with the Air 3 which is OS4+. Will the Mini 4 Pro be updated to also work with the Integra/Motion 2? Currently it's only thing stopping me from buying the 4 Pro.

[@DMProductions]

I've been told its coming in a firmware update

[@CanadianHGHLNDR]

@@DMProductions - awesome, thanks!

[@Sustainavore]

Really glad we can override here in the US. I've got the Mavic pro 2. I'm thinking about selling it and getting the mini 4 pro. Aside from the size and wind issues, any reasons this would be a downgrade?

[@BiffsEquipment]

Did you end up doing this? I just upgraded to the mini 4 pro from my mavic pro 1st edition and I’m excited. I won’t have it till end of the week though

[@DRobertson725]

So if I am a current owner of the DJI Mavic 2 Zoom would this be worth it to up grade with the new technology to the DJI Mini 4 Pro, which after watching many videos this drone gets blown around pretty good in the wind... Or upgrade to the Air 3 and hope that it gets the firmware update?

[@Bernie-ki5pl]

Is it possible to edit drone videos on a regular desk p.c. ?

[@michaelpittman8896]

When should I stop doing firmware updates? I haven’t done one since July and I don’t want to screw up and do one when I shouldn’t. But I would also like to do what I can before they make the change. I was about to sell mine on eBay so I can get the mini 4pro. But I am going to wait to sell it now.

[@stevenharris2788]

Hi there what nd filter would you recommend for general filming Steve

[@DMProductions]

Nd32 is a good all rounder but heavily depends on conditions

[@khellendrose360]

Here in the US we can override this to 500m by accepting responsibility

[@User_cc]

In EU is same, but not for long.

[@miha-z]

​@@User_ccis this 120m limit is for all drone in EU?

[@BlairAir]

​@@User_ccYes. Worse-DJI can change it remotely somehow- they changed it last week to 500m without a FW installation. So Mini 3 isn't the way around thus #@!

[@paparazzizi]

​@BlairAir not true, 500 Meter is fixed by an fw-update! Newer bring it back to wlan, an dji cannot do anything in future to your drone!

[@BillDusty]

He says that in the video.

[@TheDefenderSisu]

I just got a mini 3 pro about 6 months ago, should I upgrade already?

[@jaysheriffe6292]

Depends on your answers to the following. how often do you fly? what do you use it for? Is your current drone fit for that purpose? can you live without obsticle avoidance 360, way points and enhanced active track?

[@wallygargett1180]

Darren, do you have a video on microphones and receivers to work with the Mini 4 pro. Or could you recommend a reasonable priced one please. Thank you for your time again. ❤

[@MrBacilon]

Are the Mini 3 Pro propellers compatible with the Mini 4Pro??

[@Mighty-ue7bt]

Hi. Dm. i live in Maryland USA. But grew up in London. Does the obstacle avoidance in the Mini 4 have upper avoidance. meaning that if it’s going vertically up will it stop or avoid an obstacle directly above it? (in know it says 360 though)

[@flightographist]

Yes, it does; the 4 sensors at the front are angled to capture pitch, yaw, and top, the lower sensors handle the bottom.

[@garysaerialviews]

Scales out of his pocket... 😂😂😂 Love it..

[@DMProductions]

I hear the caa are now being issued with portable scales 😂

[@garysaerialviews]

@@DMProductions 🙈.. The world's gone mad.. 🙈🙈😂😂😂😂 Love it keep up the good work..

[@sairlordmusic]

they HAVE to have a calibration certificate from a known laboratory which uses traceble standards and be accurate or correctable across their entire weight/temperature range AS WELL (temperature with sensors is very important) . Ask to see it, then refuse to hand over the drone until they produce such a serial numbered document, testing it in-house with a bag of police canteen sugar means nothing. While they are busy running around going mad slip the underweight battery in. 1 or 2 grammes is totally ridiculous as a limit and IMHO would not stand up in court. If I really thought I was having a bad day leading to a worse week, I would stamp on the drone (sadly), at least it could be argued that after they swept its bits up a 2 gramme stone got caught in the scuttle. I live in Thailand the land of NO traffic wardens , "any trouble ossifer? Oh ok, here's a tenner (500 Thai Bhat) have a nice day"

[@pambarkman9950]

Just a quick question do you need an editor subscription to use your luts or how do u use them

[@DMProductions]

They can be used with the main popular editors, I use Final Cut Pro

[@growingupisatrap6688]

I've little experience with using luts, but how do you know which one to use? As all the lut names make little sense 🤷‍♂️

[@ChupaUK]

hi, your LUTs will work on the iPad in the app?

[@DMProductions]

they work on iPad apps like luma fusion and DaVinci resolve

[@wallygargett1180]

Afternoon Darren, when I bought my mini 4 pro I also got the three filters. One thing I was annoyed about was that I bought 2 year care refresh. But I asked if I could have the year I had left on my mini 3 pro transferred to my new mini 4 and it was a definite NO. I’m in a huff. Keep the cheat sheets coming, I still use mine and there brilliant. I carry them with me all the time, it only takes a minute to make sure I have the right settings to take a picture or video so keep them coming. Have a good week and I look forward to your next informative video. Thank you ❤

[@DMProductions]

yes it would be good if you could transfer it I agree or at least get a refund or credit on the unused months? Sure mate I'm working on them in the background, as you can imagine they are very detailed with a lot of things to cover over the mini 3. Take care mate

[@wallygargett1180]

@@DMProductions I even asked if they would give me free delivery on an extra battery, they weren’t having that either. Take care my friend 👍

[@Ifyoudonttakeitucantfakeit]

You can tf the cover if you sell the mini 3 I think.

[@wallygargett1180]

@@Ifyoudonttakeitucantfakeit yes your right. But I sold the mini 3

[@growingupisatrap6688]

You definitely can't transfer the care refresh if selling, it specifically says so in the T & C's. I managed to get a £20 store credit for my remaining 8 months care refresh when I sold my mini 3 pro, better than nothing.

[@richardcash1445]

As a newbie, is the altitude based on altitude distance above the controller, rather than actual altitude from sea level?

[@robertfontaine3650]

Altitude you take off from currently. Extremely fukt is you are flying in a hilly area.

[@SimonFletcher-d1u]

Hi,is the basic controller with the mini 4 still ocusync 4.0 or just the new RC2?

[@hiddesluijs2007]

How much does the mini 4 pro weigh with either the nd filters or the wide angle lens?

[@olyrussell9872]

Great video. Definitely going to go and checkout your Cinematic luts. Am I being dumb(probably) or is there a way to change quickshots to D log. When I have quickshots open I can't see the same video settings menu and even when normal video set to dlog it records quickshots in rec 709 :?

[@christopherjohn6047]

Great video, got a mini 4 and have a bunch of hours in a short time, love most of it. do you know if adding a lume cube or similar light will affect the colliion sensors?

[@TheSaint226]

Love “most” of it?

[@steveoreilly8330]

Hey great video... as a pro shooter i have upgraded from mini pro 3 to 4 for D - Log M and shooting in tight spaces around people I also have a Mavic and fly an inspire 2 with my mate. I have a night shoot in an Olympic swimming pool coming up and am wondering what you thing are the dual native ' fusion' ISO settings are ? high and low for the pro 4 ? Id like to shoot in low light in the pool over the swimmer in a beam of light. I can't find them published anywhere. any ideas? thanks.

[@bigboldbicycle]

2:55 how heavy is the ND filter, could that also take the weight over 250?

[@Trice4305]

Just purchased pro 4, first drone Looking at your LUTs for videos as I’m not into editing. Do you have a basic editor program that you would recommend to someone not doing drone footage as a profession? Just looking for my vids to look good. 👍🏼 thanks in advance.

[@DMProductions]

Hey I would say DaVinci resolve , it’s free and available on Mac and windows

[@jessbreheret]

Sorry late to the game but i'm currently struggling with fog on my mini3pro ( already my 3rd unit ). Is the capture on 08:26 from the mini4pro ?! it looks like a heating system over the camera lens which must be the novelty ... so down about the mini3pro ...

[@braingrenade]

Can I track my dog yet with the M4P?!

[@mster8282]

I bought a mini 4 pro but the sticker makes it 251g is it a problem?

[@jackheckenkamp6269]

Why mini 3 and 4 have video recording limit of 4 minutes and then file is closed, new file is opened ? Around 3.67 GB limit ?

[@atse7en799]

Sound like file system may be FAT32

[@stevethompson152]

Question... I'm using a 256Gig U3 Class 10 card, properly formatted and getting short video times (files), 3 to 4 minutes, am I doing something wrong? Thanks.....

[@butch3715]

Obviously the 04 Video System is the newest. Based on past DJI products, how long before you think it will take before DJI will come out with 04 Video Goggles and higher resolution Controllers for the Mini 4 Pro?

[@travelcollage4010]

Are the propellers compatible with mini 3 pro and mini 4 pro?

[@Flumphinator]

Any word on the M4P being included in the MSDK?

[@kayberry6292]

Thank you! FWIW, overheating can occur during a flight when using a Plus battery in the Mini 4 Pro.

[@PhillipSkraba]

Looks chilly in there 😂

[@DMProductions]

just a cool 10c, it'll get worse ....

[@PhillipSkraba]

@@DMProductions Oh my, that is cold!

[@kerusso3568]

What was the bracket you were using on your bike? Thanks

[@DMProductions]

cheap one off amazon but honestly its terrible

[@kerusso3568]

I was wondering if the plastic on the controller was strong enough without cracking.

[@MEROM7600]

Ok, let's turn the table. What happens if I put a DJI M4P battery on M3P? Will it have more autonomy/range because of less weight?

[@DMProductions]

you would think but instead it just won't take off

[@MEROM7600]

@@DMProductions hahaha omg 😆. Thanks.

[@ElevatedVehicles]

Does it have a 1" sensor?

[@HiethGeorge]

I have a nice set of Freewell Filters for my Mini 4 Pro will be testing them soon as always buy these and have them for my Mavic 3 Pro, Mini 3 Pro and Avata

[@heatice77]

Thank you, you answered several of my questions

[@DMProductions]

Awesome

[@shaneogarro]

So we cant use the regular Rc remote then why i can select it when i am picking drones

[@DeansDrones]

Will your mini 3 pro luts work with with mini 4 pro?

[@DMProductions]

Normal ones will but not d-cine. The mini 4 pack has new normal luts and d-log M luts

[@DeansDrones]

@@DMProductionsI guess I have to buy more 😂

[@DMProductions]

@@DeansDrones 🔥🔥🔥

[@speed200]

I'm thinking in buying this one or wait for the 5. However this altitude limit in Europe is driving me crazy. In the beginning of the year there was a chance of removing the limit removing the seal but I think that now that doesn't work.

[@chesleyrenater6158]

Thanks for the video 😊

[@sotospanos1912]

Is there any way to stream from mini 4 pro ?

[@stevee023]

Good video. I’ve got a Mini3 Pro - I don’t think I’ll upgrade this time! Do you have any tutorial videos on the practical application of your LUTs?

[@crushrreviews]

I bought the Integra goggles with the motion 2 controller literally two weeks before the mini four was released. Now it’s too late to change my mind on the goggles and controller. Will they ever be compatible with the mini four pro?

[@nexusgrey]

I would check to see if you have a firmware update. I have the air3 and the goggles and motion controller was updated this weekend to work on the air 3 and mini 4

[@rm4po4]

The Integra googles are supposed to be with the Mini 4 Pro.

[@katrinpetersen9508]

strange: I flew in France today (w/ mini 3 pro) and the 120m limit still applied :( Did I miss an update?

[@OpenCarryUSMC]

I was going to upgrade to the mini 4 pro, the Air 3, or the MAVIC 3 pro. Since they don’t support mapping software I’m going to stick to older drones that do and also don’t Geo fence me. In addition, the inability to use an existing controller with the mini 4 pro or Air 3 is a deal breaker as well. Apparently I more DJI drones for me even though I love my two current ones.

[@danielenglmann6427]

500m in Europe too after update

[@mehulsolanki4526]

Hello Sir, could you please revert Whether Mapping and Surveillance, through Dji MINI 4 PRO.

[@RonRoyster45]

Can you fly mini pro4 in "headless mode"?

[@Gunner11763]

Is it 120m Max or 120m from the home point?? So say if I take off from the top of a hill that's like 200m high can I still go up another 120m??

[@DMProductions]

In the EU only from 2024 it’s 120m from the ground take off point. You can walk to the top of a mountain tho and take your drone off a further 120m

[@Gunner11763]

@@DMProductionsohh. That's actually not bad. I never really go above 120m anyway. But I thought the new law was 120m altogether. I'll definitely buy the mini 4 now

[@larryphotography]

@@DMProductions or fly half way up, land, then take off again surely?

[@freshandsaltyjohnny]

I'm having such an incredible tough time deciding between the mini 4 pro and the air 3. The one down side holding me back from mini 4 pro is the wind resistance. A lot of the times i'm going to be having the drone stand still and hover while recording so i'm kind of also worried about it overheating while it's just flying in place for long periods of time. I currently own the air 2 and previous owner of air 1. That vertical shooting for youtube shorts and instagram is a great feature that the mini 4 pro has over the air 3.

[@fireball2275]

You found crop in though and not really lose any quality just because of the compression

[@wellybobs4403]

Overheating... on a drone with four big fans on it😂😂😂

[@dondupuis4007]

Great job with video, really appreciate the info.

[@DMProductions]

Glad you enjoyed it!

[@cheekyoscar1353]

Through I don't always agree "with some "of the people on KZbin about their reviews I DO however Agree on everything you have mentioned on this one 👍👍 you have pointed out some really good valid points absolutely spot-on. 10/10 . DJI really do like to mixing things up don't they across the whole of the range sometimes they must be on a different planet . No wonder people do get annoyed .. including myself ... hopefully software updates across the different controllers and different drones will levelled it up ... thanks for the video update great job ❤

[@ionmihai79]

does the RC2 and RC have the same holes for bike mountain? same distances?

[@DMProductions]

No. My bike mount for the dji rc doesn’t work with the dji rc 2. It is terrible tho so still waiting for a decent mount

[@RonaldBrown59]

Great information, and thanks sharing.

[@FlyboythaACE]

Thanks so much you have absolutely answered ALL of my questions about this drone!

[@DMProductions]

Really happy to hear that

[@MyViewsOfTheWorld]

Is the 120m limit a hard limit in the app? Last week I took my Mini 2 to a mountain area and I kept 120m FROM THE GROUND but the hill goes up 350m so technically, I was at 470m from the takeoff location. Is that a limitation for the Mini 3 and 4 Pro? That is, would I have to land and take off again in increments to get to the top of that mountain? With the Mini 2 I just increased the limit to 500m and kept it at about 100m manually as I went up.

[@DMProductions]

Yeah from 2024 it’ll be 120m hard limit from take off point but that’s just in EU

[@MyViewsOfTheWorld]

@@DMProductions I guess in that case, I would have to take off from the top of the mountain and then fly down to avoid that issue. It is kind of dumb unless they implemented a way for the drone to know it is at 120m from the ground and not from take off. It would not be hard to do if either the bottom sensor could sense that far (120m) or the software use the GPS coordinates to decide the max altitude at that particular point.

[@annawerner1]

Not enough updates, keeping my mini3pro.

[@uptowndisco2]

on a waypoint flight can the Mini 4 Pro continue the mission on signal loss from the controller like the Macic 3 can ? or is it flying on virtual sticks ?

[@Avoletta-qs6nf]

Not in Europe. It may be possible in UK but can't confirm. For sure it is possible in US.

[@luisquezada3261]

So that means if you use the mini 4 pro batteries on the mini 3 pro, it should make the mini 3 pro even lighter and fly longer? 🤔

[@jaysheriffe6292]

lighter yes, but as for flying longer, the difference is so little you wont notice the difference especially in conditions that drain battery life faster.

[@armyguy91357]

Will you be adding cheat sheet settings for the mini 4 pro soon?

[@DMProductions]

Yes nearly finished it’s a very detailed pack taking longer than expected

[@armyguy91357]

I haven't purchased yet and still checking other deals BETTER THAN AMAZON ($50 OFF WITH POINTS). Can't imagine I will find ANYTHING cheaper. Hey, I'm a very frugal pilot with expensive taste and sniffs for more affordable palatable prices!!

[@armyguy91357]

@@DMProductions thank you