Dji neo prop mod,and a rant

[@rachelburgess3087]

Looks so much better with these props.

[@FpvBudgetBuilds]

The prop is the "Gemfan D51(2020-4) Cinewhoop Prop". They came stock on the HappyModel Cine8. Thats why those of us that had the cine8 know how good they are. Great mod, brother 👍👍

[@Xplicit_fpv]

@@FpvBudgetBuilds appreciate the visit thank you

[@airbnbphotography]

which screws do you use for the Gem fan, someone told me that M1.2 x 6mm are to long so getting the 5 and 4mm just in case. But engines sounds fine to me

[@Xplicit_fpv]

@airbnbphotography still using the stock ones but definitely want to get something different

[@MrTAYTO1]

IN Ireland, you have to register if drone has Camera which all do. 38 euros for 2 years. the drone operator is registered, this is because clowns were flying drones at airports here so now it harder. just got neo drone and looking at mods ,came across your KZbin , keep up good vids 👍

[@Xplicit_fpv]

@@MrTAYTO1 appreciate the visit and comment thank you so much

[@fpvgio]

Looking forward to the results of the HQ51x6 props

[@vernelfpv]

brother have you experienced this wobbly flight with the D51-4 with very light wind? mine wobble so much. but if there are no winds, it's so good

[@Xplicit_fpv]

@@vernelfpv I haven't yet! I will do some testing

[@airbnbphotography]

which screws do you use for the Gemfan?

[@airbnbphotography]

I am using the Gemfan props and seems like the material is soft so that sticking out part from the engine mount locks in the propellers just fine. My concern is that some people say My M1.2 x 6mm are bit longer and sticking out too far. But engine runs good I don't hear anything suspicious or running or turning not correctly. But just in case ordered screws in size M1.2 x 5mm and M1.2 x 4mm to be sure I don't damage the engine.

[@Xplicit_fpv]

@@airbnbphotography I agree I don't want to take a chance I would go down to the five if I could find some I get my hands on them too

[@junebugpetty7386]

Which ND Filters did you go with?

[@Xplicit_fpv]

@junebugpetty7386 I have a set of an 8 to 16 and a 32. I places I fly I can probably get away with just using the eight

[@dudleybaker6565]

yes please on the filter edit.

[@Xplicit_fpv]

@@dudleybaker6565 ok

[@dudleybaker6565]

Where do purchase these props?

[@Xplicit_fpv]

@@dudleybaker6565 Raceday quads would be the first place I check

[@salty3522]

M1.2X6MM screw would work.

[@Xplicit_fpv]

@@salty3522 thank u!

[@vernelfpv]

@@Xplicit_fpvif you will use the 1.2mm screw just screw it down a bit tight as the stock screw has a thick upper part to hold the props on the side. The hole of d51 uses a different size screw than the stock

[@shogunemperor]

Yeah… those props needs abit of mod

[@Ghost_Of_FPV_1151]

You can’t make everyone happy.

[@Xplicit_fpv]

@@Ghost_Of_FPV_1151 that is no joke bro I learned that a long time ago!

[@corywebb5537]

After trying to order 5 times in three days even calling the customer service on the phone and still not being able to because of their website wanting me to download apps and make passwords and sign in just to purchase something😂. Only at the very end for it to tell me.I'm putting in the wrong address like I don't know where I live😂. So I gave up and got an insta360 just now

[@Xplicit_fpv]

@@corywebb5537 lol