DJI Osmo Pocket 3 BEST Video Settings

[@TamaraGabrielUK]

You can watch my process for colour grading my D-Log M footage, here 👉🏾kzbin.info/www/bejne/p5LUqKh3ncqJeq8si=tSntV5W2tJpJ2z6k

[@walkwithyan]

that hack with the white balance (press auto then immediately press manual) is a game changer for me. ive watched a lot of tutorials on the pocket 3 but you're the only one who taught that. thank you so much! 😊

[@AngelHernandez-o3r]

Solid advice. It’s a shame that dji pocket 3 has this white balance fluctuation issue to begin with.

[@walkwithyan]

@@AngelHernandez-o3r just a question here, but isn't that what auto white balance means? that if its on automatic, the white balance adjusts to type of light it is exposed to? because thats what i understand about it being in auto.

[@AngelHernandez-o3r]

@@walkwithyan exactly, it adjusts automatically. Unfortunately, it adjust too much, sometimes changing the colors too much as you point your camera to other areas. Most cameras handle this correctly and will work flawlessly. This device I’ve seen changes too much.

[@walkwithyan]

@@AngelHernandez-o3r that's a problem indeed.

[@mathiassiebert1217]

Another really good video about the Pocket 3. What I like most about Tamara is her calmness, coupled with knowledge and her noble attitude. This makes it easy to listen and understand. There are so many screamers out there.

[@rafael.gazoni]

Tamara has the best content on KZbin about Dji Pocket cameras and also action cameras. 100% sure that I’ll apply these settings in my pocket 3.

[@LVCHXLD]

You have the best looking pocket 3 footage ive seen

[@WRXMSK]

D-LOG M and HLG profiles both show quite noticeable amount of noise in low light conditions. The video is still usable but make sure to leave noise reduction setting at 0. If you set it to -1 or -2 you will definitely see A LOT of noise. With NR at 0 after sharpening and grading you can can pretty decent footage, with only slight loss of resolution comparing to shot taken in low light mode. This is my experience after thorough testing of this camera.

[@mrgreenfull3897]

Yes, definetly a lot of noise with those logs. I can see noise dancing even with ISO50 on a small DJI pocket screen ! Also, I can see huge pixelisation on sky and on flat uniform surfaces. After using denoising tools in After effects, it is much better, but without this is horrible. Do you have some advice with sharpening and noise setting in camera ?

[@Koensol]

Why would you use HLG or DLOGM in low light anyway? These picture profiles are for high dynamic range scenes. Low light usually isn't HDR, unless we are talking sunsets.

[@JonathanHeresOficial]

i love the quality you get grom this little camera.! Love the look and you are also great at explaining! Thanks!

[@TamaraGabrielUK]

Thank you!

[@StandleyHandcrafted]

Just picked one up today, thanks for the setting tips! :)

[@7777russ]

Tamara, The downloaded guide is perfect, thank you for making this available!!

[@TamaraGabrielUK]

You're welcome 😊

[@charlesdavis8935]

Thanks!

[@TamaraGabrielUK]

Thanks! That’s very kind 😊

[@charlesdavis8935]

@@TamaraGabrielUK You are welcome!

[@seaberttheseal]

Thank you for taking the time to make this video. Simple, clear, well done; very helpful for setup of my camera!

[@EclecticGentlemen]

I filmed all day today in downtown Annapolis, MD with these settings....footage looks great! thank you!

[@TamaraGabrielUK]

Ah that’s great! 😁

[@contidozack]

Thank you! Thank you! I love your videos. This guide is the best on KZbin.

[@poco_films]

You always come with great tips. Well done Tamara! Thanks. Please make a video comparison of D Log M and HLG and what actually the difference of these modes. See you in your next one. 🙏🏼😀

[@girlsloveshein97]

This is exactly what im doing on xmas, watching Tamara doing vlogs! 😅😅 just got my OP3 today and went straight to your channel! Thanks princess! Merry xmas from Martinique😊😊

[@dankedozo]

I don't even have one of these but the nuanced details are wonderful! Need you to review all the tech!

[@A1Bokeh]

I also think a big one is export settings as well. that would be cool for you to get into a bit

[@mister8765]

Great video! The first one I viewed after getting my pocket 3 today! Everything I need to start :) thanks!

[@Knotperfect]

I honestly think 💭 this is going to help me,to become better at filming and want to go out and film. So I’m definitely going to start off slow,filming in normal mode, just applied your settings to my pocket 3. I hope my filming comes out as good, because I’m not there yet, with the color grading. But I feel viewing ur videos, and paying attention to ur content and listening to the message. I’ll get there, just want to make it fun. Thanks 🙏🏿 peace and blessings ✊🏿

[@Knotperfect]

Always love your content, I purchase the pocket 3 b4 and sent it back.(excuses) well I purchased it again received it today, this time I think 🤔 I’m going to keep it 😂. Definitely going to learn this camera, so I guess I’m going to keep watching your videos until. Want to start filming in normal mode, so I can get comfortable with it. And not shy away from pointing and shooting, between you and Sky y’all have me back with the pocket 3. Need to start creating memories, if there’s any videos of yours, that you may feel I need to look and learn from please don’t hesitate to point me in the direction. Thanks 🙏🏿 a forever subscriber, Peace and blessings ✊🏿.

[@NinaMariePhoto]

Thank you so much, I just purchased the pocket 3 and this got me started right away!

[@TamaraGabrielUK]

Amazing! 🙌🏾

[@WalkingWithKB]

Thank you @TamaraGabrielUK I've been filming my walks with the Osmo Pocket 3 and you explained how to use it well.

[@MarcMac04]

Thank you for these tips. It's not the first time I've noticed it, but it has to be said, sometimes : the video and the pdf are both great for content and appearance.

[@mohamadkaraali]

Recently bought the Osmo pocket 3 to take vlogging overseas and this channel has been extremely helpful. Are you able to show us how to avoid light flickering. I've noticed it a lot in my low light footage. Thank you Tamara!

[@TamaraGabrielUK]

Ah yes, that light flickering video has been on my list for a while, you’ve given me the nudge, haha.

[@OutHereHavingAPint]

Glad I found this channel. This will help me a lot. I noticed on normal mode too that faces tend to be a little red more than I liked.

[@TamaraGabrielUK]

Thanks!

[@AllThingsFilm1]

Excellent video. I'm waiting for my OP3 to ship. So, I'm using that time to consume videos about it. So far, your videos have been some of the best out there for getting me familiar with the OP3. I cannot wait to get mine in my hands. Cheers.

[@Ozpeter]

I only recently discovered that EV can be varied during shooting by swiping across the screen from right to left, then adjust. Anyway, I have added this excellent video to my collection of Pocket 3 tutorials, thanks!

[@TamaraGabrielUK]

Yeah it's a really handy feature, I wish the Action 4 did it too.

[@Lucky4Wheels]

@@TamaraGabrielUK …but it works by changing the ISO, which can be very destructive no ?

[@markjob6354]

Hi Tamara. Looking good as always 🌷I find colour grading for KZbin is kind of a nightmare, because they are using an H.264 codec in 4:2:0 8 Bit colour space, which crushes your blacks and highlights, desaturates your colours, and truncates your 10 Bit Pocket 3 footage. The net result is a shift in your camera colour grading behind your back as soon as you upload it ! I wish there was a way you could calculate exactly how much the blacks and highlight detail is being clipped when you upload, so you could compensate for this in the camera footage grade before you upload your edit. (??) Even though this is happening, the D-Log M 10 bit footage is definitely much better than if you shoot and upload in regular pocket 3 settings. I would like to see you perform a test between the DJI D-Log M Lut applied to 10 bit footage and your custom colour grade.

[@TheKSpot]

Just got a pocket 3 and been watching a few of your videos, you are really good at this. easy to follow and understand. Been able to set an iso range on this is a great feature, less bathing about with a VND or ND filter. would you recommend ND filters over the VND filters?

[@dannyhendy]

First video of yours I've seen, excellent, very helpful. Thank you.

[@matchmediafilms]

Thanks for another great video. The footage looks awesome. I really love the D log and also use Film nitrate to add that special touch. Thanks again for the great tips.

[@jonahkaiguam]

Awesome guide. I've actually been doing the white balance auto/m flip and I find it works rather well. For ISO range, I'm locked in at 50 - 400 I feel is good enough

[@TamaraGabrielUK]

Nice!

[@c-404]

Hi Tamara! I'm really interested in learning about the flickering lights! I don't know if you already upload a video about it but worth a shot to ask haha thanks for the videos!

[@kyucumber6319]

This is the best guide for Pocket 3 setting! Love your color grading too. I'm about to receive my Pocket 3 and cant' wait to try out your setting! Thanks for sharing the guide and I'll also consider purchasing your LUTs once I get hang of Pocket 3! Subscribing now and keep up with wonderful work!! 🙌🏻

[@TamaraGabrielUK]

Thank you! ☺️

[@mflynn45]

Your so awesome! Well spoken and sharp...thank you! From Florida....Just recived my Osmo3 last week! TERRIFIED we might break it, so fragile...ugh cheers!

[@TamaraGabrielUK]

Thank you ☺️ I’ve knocked the gimbal a few times, it’s fine 😆

[@girlsloveshein97]

At least you aint gate keeping like other vloggers! Thanks for the tips Queen! One love❤❤

[@corajoneswales]

Nice concise and informative video. Good job.

[@benkuba0405]

I cant wait to see next videos. Thanks!

[@TamaraGabrielUK]

☺️

[@BlackBeltBarrister]

Great video! 💙

[@TamaraGabrielUK]

Thanks, Daniel ☺️ I love your channel, I’ve binged many videos over this past year!

[@BlackBeltBarrister]

@@TamaraGabrielUK Aw, thank you! I must say your footage out of the Osmo is phenomenal! I just wish I could use my equipment properly and I'd be out and about more. I have the Sony A7sIII, ZV-E1, Osmo-P-3 and a few others but FAR from using them properly 🤦‍♂😅 One my my biggest gripes is the right combination of settings in different places - particularly indoors - so I'll be binge and re-watching your videos! 🙏

[@TamaraGabrielUK]

@BlackBeltBarrister Oh I’ve been there with the cameras too, haha 😅 There was definitely a certain level of frustration in the past when I couldn’t piece together the best settings for the look I wanted 😆 Then I learnt about lighting, it changed everything. But yeah, feel free to shoot me a message on Instagram anytime if you’re stuck. Happy to help 😊

[@BlackBeltBarrister]

@@TamaraGabrielUK Thanks! Just pinged you a message :)

[@caruhhl]

Thank you so much for sharing!! I can't wait to get mine :) just bought it this week!

[@TamaraGabrielUK]

Amazing! 😁

[@Day1Adventures]

this guide is amazing thank you

[@TamaraGabrielUK]

No problem ☺️

[@monetarnie3841]

Tamara Gabriel for president!!!!

[@romainhebre]

I really enjoyed the quality of your videos, moreover your tips are really helpful ♡ 🇫🇷

[@TamaraGabrielUK]

Thanks!

[@Drrichardjmoore]

Great video as ever! Just bought my first pocket 3 and all of your videos are very helpful! Thanks 🙂

[@TamaraGabrielUK]

Great to hear! 😊

[@d.rankin9836]

This was very useful. I have notice that tab color adjustment is not available on my fcpx software. Not sure why

[@brivnii]

The quality is insane!

[@TamaraGabrielUK]

😊

[@worldchampion]

Very helpful information

[@TamaraGabrielUK]

😊

[@worldchampion]

@@TamaraGabrielUK❤

[@showingYOUtheworld]

Nice and helpful video as always Tamara 👍 Thank you 🍀 You also answered my question: how the P3 performs, when it's cold outside - 2:56 I am coming in England next month and I am going to stay till the 1.03. so I am thinking how the cold will affect my P3 🤔 ? Of course I am talking about temperatures around 0 to minus 2-3C and I hope, that the P3 can handle such temperatures without problems 🤞🏻

[@TamaraGabrielUK]

Thanks! It's been in the minuses recently for me and the P3 has handled it well.

[@showingYOUtheworld]

​@@TamaraGabrielUK Thank you for the info 🍀

[@Vblock-b9]

Hi friend! I want to know what the best mode to use pocket 3, thanj’s

[@skibekpl]

Very useful informations. Thank you, Tamara! Greetings from Poland. 📽

[@TamaraGabrielUK]

👋🏾

[@aaphotofilm]

Interesting video Tamara, i also always wanted to know how you did that cinematic look, looking forward to your next one in colour grading, learnt alot in this one, thank you :)

[@TamaraGabrielUK]

No problem 😊

[@aaphotofilm]

@@TamaraGabrielUK I actually quite loved the look, its so cinematic, im actualy gonna try it out based on the settings you told us :)

[@TamaraGabrielUK]

Cool. The second part (the colour grading will be tomorrow).

[@aaphotofilm]

@@TamaraGabrielUK Tommorow, wow that was quick, hatever way you do it im sure you can do it in DAvinci resolve too as i tend to use that, either way i look forward to it :)

[@TamaraGabrielUK]

@@aaphotofilm Yeah, it doesn't matter what software you use, it will work in any. I'm just going through my process and how I do it.

[@Thereelzain]

Hey Tamara, I’m an actor and I just recently purchased the pocket 3. I was wondering if there was any online class place you recommend where I can learn about the iso, ev meters, etc.

[@vincentpolisi]

Tamara, your videos are excellent. One question though, why did you decide to use the Røde Wireless Pro rather than the DJI Mic 2 that connects right to the DJI Osmo Pocket 3? I have both and they work together beautifully. Connects instantly and immediately. Sound quality is fantastic. Just curious. I've got dozens of mics of all types so I understand personal preference. I just didn't know if you had an issue with the DJI Mic2 or there was some other reason. Now, on to your next video...😁

[@TamaraGabrielUK]

Thanks! At that time I was just testing the Rode Wireless PRO a bit more as it wasn’t long before this video that I got it. But otherwise if I’m using the Pocket 3 or Action 4 I do tend to use the Mic 2 for convenience because of the Bluetooth connection, even though I prefer the sound of the Wireless PRO.

[@MayanPatel1]

Smashed it. No faff and usable tips!

[@TamaraGabrielUK]

😊

[@FrancoAversa]

Great video, but when you put it in automatic there is no need to frame something white, before switching to manual? Is there only the Rec 709 LUT on DJI to convert from D-LOG M or are there other free ones available? I work in Davinci Resolve but nothing changes for LUTs.

[@TamaraGabrielUK]

I’m not sure you understood. When wanting to shoot in manual white balance to avoid colour shifts, the easiest way to “know” which kelvin value to set it to so that it is “correct” for the scene at hand is to put it in auto then immediately switch to manual. This is not for shooting in to white balance, for that you just leave it in auto.

[@FrancoAversa]

@@TamaraGabrielUKYes, thank you, but when you switch to automatic and you don't have a white in the scene, will the camera still adjust to white? It averages the colors, shouldn't we frame something white to be safe? Then you switch to manual and you saw the kelvin degrees so you lock them on the fixed value so that they don't change often.

[@GeorginaFlows]

Just subscribed! I love your explanation and how easy it is to understand. I am so not techie and it's hard for me to navigate cameras and I thought this is the simplest one to play with so I got one! But I cannot find the sharpness settings on my camera 🤣waaaa but thank you again!

[@TamaraGabrielUK]

Thanks for subscribing ☺️ When you go into the menu by swiping from the right, when you scroll down a bit you’ll see Image Adjustment, select it and change it from Default to Custom, then you’ll see Sharpness and Noise Reduction.

[@shinertom142]

Very cool and informative video … I like your style 👍🙏

[@pixelskc]

Great information. Thank you.

[@FatherandSon_Adventures]

Hey Tamara. Thanks for this information. I just recently bought and used the Osmo Pocket 3. I did have a problem with it. I have the settings on D-Log M, and did not change anything else. My selfie video footage has some color distortion, I am not sure why. Please advise. Much appreciated

[@mau2494]

Great video, great explanation and examples!! I have a question, I´m planning on using my Pocket 3 for a 2 week travel vlog. Do you recommend me using -0.7 EV (normal) and -0.3 (Dlog) even in low light scenarios? I mean, just put that setting on the camera and forget about it? Thank you!

[@TamaraGabrielUK]

To be honest, most of the time these days I leave it on -0.3 EV and it’s ok, even in low light. If it still looks too bright on screen you can dial it back to -0.7 EV.

[@mau2494]

@@TamaraGabrielUKGreat. Thank you so much!

[@kraggman]

Nice job on the video. Short concise and very helpful. Thanks !! Subbed !!

[@TamaraGabrielUK]

Thanks 😊

[@clarkma123]

your guide only mentions D-Log M and normal but what are your thoughts on if/when to use HLG? thank you in advance!

[@TamaraGabrielUK]

I don’t use HLG as I don’t like the image it produces.

[@Jevole-Paramoteur]

Thanks a lot for this video, I saw some video of you and I subscribe ;) I'm going to buy a Pocket 3 for my vlogging... and maybe later an Osmo action 4 (or 5 if it releases soon? ) these 2 cameras seems to be really perfect (and I have a Sony ZV1!) . Cheers from France

[@TamaraGabrielUK]

That sounds great, they’re the perfect pair 🤩

[@Vegancutie]

Thanks for the handy guide! Mine comes in 1.5 days (but whos counting 😅) and I cant wait!

[@TamaraGabrielUK]

😆

[@nidaltawel]

Beautiful Tamara at minute 7:08 What is the camera you recorded the video with, the type of microphone and the editing program?

[@TamaraGabrielUK]

I was using the Osmo Action 4 and Rode Wireless PRO.

[@HeroVange]

Do you have a video similar to this for the dji osmo action 4? If not, may I request?

[@TamaraGabrielUK]

Yep, here you go kzbin.info/www/bejne/mamUip6fpbeZfJo

[@afsandreptiles]

I had a problem I hope you can help me! I am a new and beginner user of the Osmo Pocket 3 camera, and I was making some videos with the initial configuration (normal) that the camera comes with and everything was going very well, seeing your video motivated me to record and edit my videos with the pro configuration, the problem is that when transferring the video to final cut pro the video and audio are out of phase, I did not move any additional audio configuration to the one you put in the video, I followed all the steps as is and that problem occurred, Even changing to automatic mode, this problem still happens to me, and it is always when I transfer the video to the final cut pro editing line, what could it be?

[@dannyhendy]

I'm not sure if it's the new firmware, but if you want to reduce the noise, you have to put it to '1', not '-1'. I just tested it in dark conditions, against a wall, I experimented until I could make a noisy image. It was by putting it to 1 that I got rid of the noise. Putting it down to -1 made it worse. Every KZbinr I've seen says the opposite. It may be a good video to do, as everyone is saying the same thing and I'm almost certain it's wrong. Again, it could be a firmware thing, but try it out. If you think about it, it makes more sense, double negatives and all that.

[@sanchitgoyal2282]

Hello, Can I use Anker 20,000 power bank to charge pocket 3 or do we have to buy dji 65w charger?? or which charger???

[@MIKE_OSCAR]

is there any way to put the pocket so it everything In focus what you are filming, instead of blurring the background and stuff

[@TamaraGabrielUK]

No. For that you’d need an action camera or a mirrorless camera where you can adjust the aperture.

[@noblecreditpull7503]

this review was so m-f Clean.. sheeesh .. THANK U

[@TamaraGabrielUK]

Haha, you’re welcome ☺️

[@mtawali13]

THANK YOU!!!!!!!!

[@TamaraGabrielUK]

You're welcome

[@postcardsfromgermany]

Very nice tips Tamara! I am still on the Pocket 2 and I use AUTO as well, but in combination with ND Filters. I limit my ISO to 800 or 1600, set the EV to -0,3 or -0,7. Then the shutter speed will automatically be in the 1/120 region when I am shooting 60FPS footage. Normally I just use an ND8, if its very bright and sunny I go higher. That works quite good and for me its the best solution as I am constantly walking around in cities. The manual settings are quite difficult to manage in these situations. Thanks for the video! Does that White Balance trick also apply to the Pocket 2? Found that very useful (the quick switch between Auto and Manual as it remembers the numbers).

[@TamaraGabrielUK]

Nice! Yep, the white balance trick also works for the Pocket 2 as well 😊

[@postcardsfromgermany]

Thank you Tamara @@TamaraGabrielUK

[@Omjok1977]

Bagaimana cara transfer file vidio ke smartphone Samsung s23 ultra...... Kalo bisa bikinkan vidio nya di chennel KZbin..... terimakasih sebelumnya salam kenal dari Indonesia...... Terimakasih

[@michaelmarcano9200]

What lav is that? Looks different than the ones that came with the Rode wireless pro and sounds very good.

[@TamaraGabrielUK]

The one that came with the Wireless PRO. I have the pop filter on it.

[@michaelmarcano9200]

Oops lol. Thank you! Love the videos!

[@jorgecorante]

Hello, A quick question: Do you recommend shooting in 8-bit vs 10-bit? Thank you!

[@Gregory-vi1oo]

W profilu normal zawsze -0,3EV lub -0,7EV nawet w pomieszczeniach i wieczorem? Czy tylko w słoneczny dzień i w filmach kręconych na dworze?

[@markchu1124]

Which video compression you suggest for vlogging? Thabk you is it efficiency or compatibility

[@TamaraGabrielUK]

I use efficiency

[@markchu1124]

Thank you dear!

[@mr.justyum]

This is Great Tamara, keep up the good work. I saw your videos on the Action 4 and I guess its more suited for me. Is it possible to connect Rode Wireless Go 2 with the Action 4 using USB Type C to C Cable? Or do we require any additional cables? Please let me know. Thanks

[@nicholassibley5080]

Thank you!

[@filmmakerevolution]

Here in China its a PAL region the same as the UK, I however prefer DCI 4K with true 24p so I still shoot all projects both personal and commercial in NTSC regardless 😆 and rarely find theres much if any flickering except maybe if in a shopping mall. Usually just a slight increase in shutter speed or just fixing it in post works. Some jobs do require us to shoot 25 p but then you loose the 120 fps should you want slowmo 😞 Are you in Bristol per chance? Looks like snippets of my home town in the vid 🙂

[@brad_neal]

Nice video, thanks!! I assume one will need to get the DJI mic if you want to shoot with an external mic? I currently use the Rode wireless Go mics, but not seeing a way to integrate those into this camera.

[@TamaraGabrielUK]

I can't remember, does the Rode Wireless GO (I'm guessing you have first gen) record internally to the mics? If so you can do that and sync in post

[@brad_neal]

@@TamaraGabrielUK I have the Go II. And yes, it will record internal to the mics, but I'm guessing it won't record to the Pocket 3. And thank you for the quick reply!!!

[@walkwithyan]

hi tamara. how come you used the rode wireless pro for your audio instead of the dji mic 2? the rode has better quality?

[@TamaraGabrielUK]

I hadn't charged up my DJI wireless mic 2 transmitter 🙈 and wasn't sure it'd last for the video, but I'm also alternating between using the DJI mic and the Rode Wireless PRO for my videos to see which I prefer overall in terms of audio quality.

[@walkwithyan]

@@TamaraGabrielUK let us know which you prefer. im leaning towards the rode. it just sounds better, in my opinion. but i want to know what you think. 😊

[@TamaraGabrielUK]

👍🏾

[@sanchitgoyal2282]

may i please know what is the recording time for 4k60fps in pocket 3?

[@andregueta]

Cant wait for your tutorial of color grading 😅

[@TamaraGabrielUK]

😊

[@jimpazj]

wow, amazing quality.

[@TamaraGabrielUK]

💯

[@TheRetiredTravelers]

Just ordered the 3 and came across your channel on my way down the rabbit hole😂, We vlog as a couple and need ( prefer) the wider view,is there a ND filter for the wide angle lens or work around for a cinematic look? Thanks for all the awesome content!

[@TamaraGabrielUK]

Nothing that I’ve come across. Freewell used to have nd filters that attached to the rear of a wide angle lens for the pocket 2, but it doesn’t look like they have it for the pocket 3 unfortunately.

[@TheRetiredTravelers]

@@TamaraGabrielUK thanks, it's still early so may they will bring one to market for the 3 🤞

[@LyricOnTheBeat]

Every time I shoot in 24 or 25 fps I constantly get a jittery video. This happens with ND filters on or off. 1/50 with 100 iso. Is there a different way to get that smooth footage?

[@Koensol]

It should only be jittery if you pan or tilt really fast. If you move the camera slowly you should get that nice smooth motion blur. If you want more and faster movements in your video. Go for 50 fps with 100 shutterspeed. Less jitter that way, but also less motion blur.

[@marcovanloock4967]

Hi Tamara, I'm thinking about buying the Pocket 3. At the moment i'm still using a gopro. How do colour grade D-Log M footage with Hyperlaspe or Timelapse, because no d log is available in time-lapse mode? It's a challance for me to colour grade when I use Timelapse and D -log M footage together. Greetings from duisburg germany

[@TamaraGabrielUK]

You can still apply a colour grade you just won’t have the flexibility be able to push it too far before the video quality degrades.

[@temporal0044]

Hello. How do you think ? Which is better gopro or DJI O.P. 3. Thank you.

[@TamaraGabrielUK]

Depends what you're using the camera for.

[@temporal0044]

@@TamaraGabrielUK *_OK_*

[@Sickdog417]

What is the free editing software you mentioned? I cant find it now

[@TamaraGabrielUK]

It might have been CapCut.

[@Cinccinatti_C3]

My pocket 3 hasn’t arrived yet but I have a question. I’m new to photography and videography. If I shoot in D Log M is there a simple way to load the clips and have them automatically render the footage? I have a lot to learn but was just curious about this as a quick reference. I think I’ll prefer the d log m over but until I learn how to color grade and all the in ands out I’d like to know these things meanwhile. Also, have you gone live stream from your pocket 3. I was curios it’s a simple process or not?

[@TamaraGabrielUK]

Yeah, if you use D-Log M you can use conversion LUTs to go from flat to "nromal" without having to do it yourself. DJI have one, I also sell some. Give DJI's free one a go to see how you get on.

[@Cinccinatti_C3]

@@TamaraGabrielUK thank you 🙏🏾

[@DroneStories]

Dlog-M is NOT A LOG PROFILE. It is better to use HLG. Unfortunately, DJI doesn't have a lut for hlg to rec 709.

[@francescoliguori4708]

A nice video, as always. Could you please make a Pocket 2 vs Pocket 3 comparison? Today the Pocket 2 is on offer for 299 €. Thank you very much!

[@TamaraGabrielUK]

On it 😏

[@johnny_bravo9990]

As per my understanding Normal profile low file size D log huge file size Am I right

[@allstarbury]

I see you are using FCP i am using davinci on which not only i can use your luts but i have dozens luts on different cameras . I am testing gamma color space which makes darker overexposed video and that prettt good solution For few normal mode i stil can add more colors. Have you seen new update? Nornal mode in 10 bit too 👍

[@TheOShow35]

Awesome cheers

[@TamaraGabrielUK]

You're welcome 😊

[@KehOlaleye]

What filter set is that pls

[@TamaraGabrielUK]

These ones geni.us/mpBj0Ns

[@tseven4213]

❤ U 😊

[@enriquemartin8655]

Thank you for your presentation. I was going to get the device, but changed my mind upon learning you have to activate it after a few usage.