DJI Phantom 4 series motor

[@catamaranmentor]

Thanks for the video, just got iron sand in mine after flying on an active volcano.

[@bachisquiri]

Thank you for another great video

[@maxlackett1630]

Good to see a video from you! Been a while. Hope everything is well!

[@Droneted]

if the yaw casing is damaged or lost go to this video: kzbin.info/www/bejne/mHfNg4ehrt93h9U

[@gagolfanddrones487]

So Ted you know you can use that magnet and shaft with a P3 Armature and install them right on a P3 I have done it and it makes an awsome P3 Pro Hybrid

[@mvivanc]

Great job!

[@broughamjb]

Ted tried the video bit found i knackered 2 of the 4 bearings taking the assembly apart. I have new bearings but cannot get the old ones out?

[@Droneted]

sorry to hear that. I use a punch to knock them out. It is long and narrow. I put it through the hole in one bearing. Put it on a slant so it catches the edge of the bearing and tap it out.

[@user-io5rt5fi5s]

is there a way to check the motor for debris without removing the motor from the drone?

[@Droneted]

Spin it by hand. You can feel the difference. If it is dirt you can blow it out with high pressure air. If it is metal you will have to take it apart

[@robertcroft2591]

What kind of clip was that?

[@Droneted]

We call it a Jesus clip. Probably not the real name.

[@robertcroft2591]

Snicker snicker hmmm.@@Droneted

[@basherrasheed5844]

How are you sir do you do a repair service

[@Droneted]

Yes I do.

[@basherrasheed5844]

@@Droneted I live in Germany, how can I send you the drone?

[@Droneted]

@@basherrasheed5844 you can email me at: [e-mail] Shipping is rather expensive from Europe. Is it the whole drone or just the gimbal that needs work?

[@basherrasheed5844]

@@Droneted I have the same problem as in the video, and since someone else tried to fix it, I would like you to check it as well..

[@Droneted]

@@basherrasheed5844 So you are having issues with the main motors on the drone not he gimbal?

[@catamaranmentor]

Thanks for the video, just got iron sand in mine after flying on an active volcano.

[@Droneted]

were you successful?

[@catamaranmentor]

@@Droneted have not cleaned it yet will let you know

[@Droneted]

@@catamaranmentor I would use CRC electronic cleaner to clean the motors when you open them. Then I would blow them out with compressed air.