DJI RSC 2 Accessories | The Best Gimbal Accessories For Video Creators

DJI RSC 2 Accessories. The Best Gimbal Accessories For Video Creators. Here are the 5 best DJI RSC 2 gimbal accessories. The Ulanzi accessories and Smallrig DJI rs2 accessories are amazing DJI gimbal accessories. The Falcam f38 quick release system is perfect with your DJI RSC 2 gimbal setup.
These DJI RSC 2 accessories will give you a better DJI gimbal workflow. It is the absolute best gimbal accessories for your DJI RSC 2 setup that I use daily. You can find the Ulanzi accessories and Smallrig DJI rs2 accessories in the link below.
Ulanzi Falcam f38: geni.us/Aqlw
Ulanzi baseplate: geni.us/YmdVD
Gimbal Side Handle: geni.us/LABApv
Gimbal foldable handle: geni.us/RxsI
Monitor mount: geni.us/Jn8VvpX
SmallRig Baseplate: geni.us/Ka2IG3
Video to watch:
The New Ulanzi Falcam Quick Release: • Quick Release Plate Fo...
5 Basic Gimbal Moves: • 5 Basic Gimbal Moves |...
Go from beginner to GIMBAL PRO and learn all aspects of working with GIMBALS. Sign Up now and get notified when The Gimbal Academy is available.
Join The Gimbal Academy: geni.us/lr6f4cE
Gear I Use Right Now: geni.us/1CEY5i
Gimbals & Accessories:
Quick Release Plate I use: geni.us/Aqlw
Gimbal Side Handle: geni.us/LABApv
DJI RSC2: geni.us/AEsDUPa
DJI RS2: geni.us/xnCiN
Zhiyun Gimbals: geni.us/KcHF
Smallrig Baseplate I use: geni.us/YmdVD
Downloads:
My Custom Gimbal Settings: geni.us/WeebillSCustomSetting
Weebill S Firmware: geni.us/53Ky
Creative Tools I Use:
Fulltime filmmaker Online Film School: geni.us/LkEcz
Course Creator Pro: geni.us/cSP89
CinemaGrade Color Grading: geni.us/sxZngwl
Artlist Music 2 Months Bonus: geni.us/eKqbrK4
Artgrid Unlimited Footage: geni.us/c22EOhu
TubeBuddy: www.Tubebuddy.com/makholm
MorningFame: morningfa.me/invite/makholm
Lens Distortions SFX: geni.us/tU68
Motion VFX Templates: geni.us/zFBOeOW
Sell Online Products: geni.us/53Ky
Gear & Sponsors
Gimbal Accessories: geni.us/vk9gfks
Panasonic S1H Cinema Camera: geni.us/EV33Y9
Panasonic GH5: geni.us/XmTCnS
Favorite Lens: amzn.to/2NGRmak
Drone I use: geni.us/9NH1
Gimbal Of Choice: geni.us/AEsDUPa
Special Thanks To: www.focusnordic.dk/
Panasonic Nordic: bit.ly/2EGsMk9
Subscribe To Peter Makholm: bit.ly/2Sk0EJw
Disclaimer:
Links included in this description might be affiliate links. If you purchase a product or a service with the links that I provide, I may receive a small commission that will help support this channel, so I can keep creating content each week. There is no additional charge to you. Thank you for the support; it is highly appreciated.
#DJIRSC2 #gimbal # #thegimbalacademy

[@happybanana3040]

I truly love the adaptability of the RS2 both for added convenience and functionality. Definitely a great purchase.

[@icamtoseeyou2574]

Just ordered the Tilta Float last week. Gonna make filming so much fun!

[@user-dh5fp4gw1b]

The float doesnt work with the rsc2 right huh????

[@GoodGuysMedia]

I had to return to this video after my Ulanzi handle arrived. Appreciate you for making this video!!

[@MajorGeneralHavoc]

bought everything you recommended here and decided to buy the src2 instead of the rs 2 becuase of this video and this setup. THANK YOU ♥♥

[@sproglode]

Peter, what an excellent and informative video, thanks. Good production, good lighting, and even more, really helpful for me since tomorrow my RSC should arrive....

[@jiunjiunma]

I also use the side handle with my DJI Pocket 2 so I have a "dual" handle. It works really well.

[@PeterMakholm]

Yeah, no matter what gimbal you use it will give you more control.

[@muteoptics6737]

Thanks Peter. Already ordered the quick release plates.

[@PeterMakholm]

Great to hear mate.

[@orpaztron]

Thanks Peter. I'm looking for a solution to connect a DJI RSC2 gimbal to a monopod or an extension rod that can be trusted with dynamic movements. I'm worried that the small screw will not hold the weight (4-5 kg). Do you have an idea for a stronger connection?

[@MrTumtum32]

Just bought the DJI RSC 2 Pro Combo, will buy the Accessories soon

[@sarasotadroneguy]

Looking forward to getting some of these. Thanks for the video.

[@Mike0193Azul]

Super helpful video, gives me a great idea on how to rig out my gimbal

[@RegularJoeTravels]

Subbed! Waiting for covid to lift so I can do more travel videos! My RSC2 is on the way and thanks to you I just ordered the folding handle. Unfortunatly they were out of stock at the time (Most are sold out or on backorder) so I had to order from china. Love your videos, keep them coming! Regular Joe

[@smartmo5]

thnx buddy , bought r083 and dh03 from your link and can't wait 😍😍😍😍

[@mitchellscott2185]

Recently found this channel. I have learned and enjoyed your content. Based on this video I ordered the SmallRig base place and the Ulanzi quick release plate. The SmallRig base plate simply did not fit my DJI RSC2. There were a few more reviews that gave a low rating based on this but ignored and went for it. Just my experience and felt was share worthy.

[@PeterMakholm]

I don’t understand why it doesn’t fit. It fits on all my dji gimbals. Are you sure you got the right one. And nit the one for Zhiyun gimbals. Please send me a picture or video of the issue to me. Thx pete.

[@TheFirstMillion]

Thank you, very helpful video!

[@aaron4165]

Hey, great video, thanks for putting it together. Can I ask what HDMI cable you are using in the video with links to Amazon?

[@Pablo-bo6cp]

Fantastic video! I was waiting for it! Thanks!!!

[@hbhavsi]

Great video Peter, very informative. I loved your lighting and audio clarity in the video too. Do you mind sharing details about your lighting and audio setup? Thank you so much!

[@tenhomebuyers5313]

Yes, I'd love to see that too. Perfect lighting.

[@rezaVfx]

Thx mate very helpful! Can you make a Tutorial on RSC2 movement? Sometimes when I filmic different camera works, the gimbal kinda twist and never back to default position! So it's impossible to take a long shot with different angles

[@TheusDjehuty]

I just got the ulanzi up rig back handle and the ulanzi side grip

[@ulanzi]

Hi peter, thanks very much!! Perfect presentation😃

[@PeterMakholm]

Always a plesure using your products.

[@AlSo-Fotografie]

5:08 thats sick....let me put on the shopping cart as quick as possible :D

[@grimcreative]

All I want is the foldable handle. Is that pre-order for you too?

[@joshgamingyt9766]

DJI RS2 is awesome. Get the Pro Combo, it's the best deal.

[@MortgageMadeSimple]

Thanks for the recommendations! Do you know of any quick release plates that work with the peak designs base plate?

[@TheStudio_70]

So glad I found your channel! Loved your settings video. You gotta new sub👍

[@PeterMakholm]

Thanks mate.

[@torbjornlingoy8991]

Great video, thanks😊. I have problem with my atomos Ninja v when balacing because of the hdmi cable. Your cabel looks so thin and fit the rig in a practical way. What is the brand?

[@maxq8652]

What a great video.. thanks...

[@sethpiezas2040]

I've been trying to figure out if this can be attached to a hanging jib arm. No real great searches for a stable, fast connect option. Any ideas? I'd hate to go RS 2 just because there's more of a path for this. Great videos!

[@fotografkennethlund]

What a great video - thanks a lot !

[@Deny_challenger]

THANK YOU A LOT BRO

[@mattc3510]

I’d love to know what HDMI cable that is. The small rig ones I got were too short and same kondor blue too short. Great video that side handle looks like a must buy

[@frankpetersen9893]

Thanks Peter for your great videos. Can you please make a recommendation for a gimbal monitor? Thank you in advance for a tip.

[@ronfoy9618]

Great content Peter. Bro, Please clarity one thing for me. I am buying the F38 and Smallrig Baseplate or do I have to buy F38 with a Ulanzi Combo and yet a Smallrig Baseplate? The Ulanzi component are throwing me off 😂

[@KNZTECH]

Very good video thanks bro

[@Frank_Borden]

Good stuff man! Subscribed!

[@johnbivins]

Can't thank you enough for putting this video out. Just ordered my RS2 pro combo and your recommendations from your links. I've mostly shot stills but dived hard into Video. Currently using pro media gear and small rig stuff! THIS HELPS A ALOT! thanks bro

[@nikkoarnado6521]

Hey Peter thanks for posting your review on these accessories. I am definitely getting them or maybe the DJI dual twist or Smallrig dual versions but I need your help. What do you think about briefcase mode now a days? The benefit of the DJI twist grip is that it allows an easy briefcase mode if desired but I see other youtubers prefer the dual grip upside down. What are your thoughts?? Thanks in advance!

[@movia3180]

Hi Peter, Thanks for the review. Will the Ulanzi UURig L-Grip Side Handle also fit the RS2 ?

[@adamNathanbrandi]

Thanks for the video. I purchased the arm with hopes of mounting a monitor on top but there is not enough clearance with a 7” or 5.5” screen. Had to order an additional arm for the accessory mount on the gimbal.

[@techygeniuslc6446]

Same problem what arm did you order?

[@chmac10]

Hey bro!! Please share with me the. Link to buy the cable that you use to conect the monitor with the camera .. extra light

[@artisanvideography]

Which HDMI cable are you using, that thing looks amazing and is very flexible.

[@orpaztron]

Thanks, love the channel. if you can- add some chapter/ time stamps to make it easier.

[@trayfasho3069]

Great video

[@scottweaverphotovideo]

I just got the Ulanzi side handle and really like it on the left side. But when you mount your phone it bumps against the gimbal as it moves.

[@scottweaverphotovideo]

Thanks very much! Are you sure the FALCAM F38 fits Arca-Swiss plates? The comments at Amazon say it doesn't and they had to return it.

[@umbertorozzo9986]

Hi Pete, sorry have noticed in your links you have links to the Ulanzi base plate and the Smallrig, for use with the Falcam quick release which would you prefer for the RSC 2?

[@71whitey]

Hey mate, love your work . But...reckon you can slow down sometimes? Us beginners look to you for help but sometimes you go too fast. Cheers.

[@ilzephyrli]

Now that there's an Ulanzi baseplate, Do you recommend that over the Smallrig?

[@dffbootcampfitness3919]

what monitor do you recommend that will fit on top of the side arm since the SmallHD Focus 5 inch is discontinued. I can’t seem to find a good alternative

[@janzelhill7234]

I bought these because of your recommendation. Im struggling with hdmi cables. What would you recommend?

[@nunosaraivaphotographer]

Peter, the Smallrig plate fit in the weevil S ? Hugs from Lisbon and Thanks again

[@Soul_Visuals_Photography]

Peter, can I just use my peak design plate, the larger one on the small rig plate you show here ? Do I really need the F38?

[@marcsimard7841]

HI ! Ilove your content ! Is there a technical strap compatible with the RSC2? The smallrig one is not compatible! sadly!

[@kyl3flynn]

i can’t find the folding back handle anywhere??

[@musanetesakupwanya1050]

Sad that Ulanzi doesn't deliver to South Africa :( Great video though man. About to get the RSC2 on friday. First gimbal, starting strong lol

[@seanpaterson1119]

It's available on Amazon, ships to SA no problem… R500 for the baseplate :)

[@6ixfoa320]

Me 2 lol

[@jchambo86]

So, I just recently purchased the Andycine A6 Plus, and when mounting it with the included arm on top of the UURIG L-Grip / Side Handle, it's too tall and too close to the actual Gimbal (RSC2), so when it rotates it just collides into it. Aside from a dedicated Monitor Mount say, from SmallRig (NATO clamp) - is there any option to "scoot / move" a monitor mount a little more to the left while still having it mounted on the L-Grip?

[@_osnap_]

The smallrig baseplate does not fit the RSC2. It's almost like you have to jam it in there with a lot of force and nothing should be that hard to get in. That's a bad sign! I think it's more compatible for the RS2.

[@romanmachanec2467]

What monitor do you use? Does it support touch focus, i mean like wireless remote touch points though wifi or something?

[@luclaflamme4712]

What about pulling focus with both hands on side handles ?

[@nightdonutstudio]

Can you mount the folding holder on the left side of the rsc 2?

[@rodinnyfotograf]

Hi, Fancam F38 fits directly into the original DJI plateon RSC2 or I have to buy first a Smallrig 3061 and put it into? And the safety pin on a DJI/Smallrig plate works with Falcam F38? - to protect it from slipping off accidetialy....

[@chrisholland8226]

2 questions. Do you not connect the gimbal to your camera with the usb c connection? Also, what monitor is that you are using and is it compatible with the Sony System? (I use an A7C)

[@MrDprince804]

What type if monitor was that did u attached to gimbal because mine takes a v mount battery

[@emmabailey8488]

Any links for UK/EU or just order from USA? Thanks

[@MANGO-FILM]

Hi Peter, what is the monitor you are using for the gimbal. Is it 5" or 7"? is it convenient to use a 7" Monitor on the gimbal?

[@TrunkFilms]

Has around found a good case for the RSC 2?

[@RaymondKPhotoVideography]

Does the SmallRig 3061 Manfrotto with Arca-Swiss baseplate also work with the Weebill s..? Since the Weebill s also is Manfrotto..?

[@wisanulohakitja6201]

I could not get the SmallRig Base Plate #3061 to fit in RSC2. Could anyone help me, if I am doing anything wrong. Thank you.

[@tangoproductions2573]

Hey Peter, what exterior monitor do you recommend with this gimbal? I have a Freeworld 7" but thinking it might be too big.

[@FallRiverFlint]

I use the FEELWORLD FW568 5.5". it fits perfect and is an excellent 4K monitor for under $150.

[@runepedersen1570]

Hi Peter! I'm with A7SIII and RSC2 + Shinobi. I need an A to A HDMI. Which one are you using?

[@christnkounkou7509]

Hello Peter thank you for your tutorial. Can I have the reference of your HDMI cable to connect the box to the gimbal please?

[@JohnAmaro_Official]

Hi which firmware update is best until now for weebil s? i am still back in 1.96 version:) Ps.Nice video:)

[@PeterMakholm]

I still think 1.96 is the best. 2.02 is ok, but the vortex issue is ignoring.

[@njcimaging]

where did you get the HDMI Cable? I can't seem to find the right one for this type of set up. I've tried so many and they are always to stiff or to small.

[@MaKASUYA]

This video is so cool, and I love it. Thank you. You are my best instructor. I'd appreciate it if you tell me the HDMI cable that you are using in this video. The time scale is 11:14.

[@dgafcreatives6680]

might be the HyperThin cables

[@MaKASUYA]

@@dgafcreatives6680 Thank you for the search words. I could find many HyperThin cables.

[@thomascorneliussen430]

Hi Peter. I'm a small video-creator, also from Denmark, but I can't find some of these accessories on the Danish market and I am afraid that there will be a lot of taxes, if I buy products from the international Ulanzi's store. Do you have any advice or comments? Elsker dine videoer ;)

[@amckeag10]

What is the function of a monitor/mount if you can already attach your phone? Is there any other functionalities?

[@quirkworks4076]

I have the Ulanzi handle but can only mount it on the right-hand side. If I try on the left it bumps up against the briefcase knob. I'd love to mount it on the left, since I am right-handed. Any ideas? Thanks!

[@saulmuzic]

Do these Ronin rs2 assesories fit the rs3?

[@A1Bokeh]

Random but what is a good hdmi to use ?

[@AOJOPhotography]

What hdmi cable are you using ? They look really thin.

[@udornyc]

Can the *Nikon D4s* fit on the RSC2? I have a great offer from a friend who is selling his (Pro Combo) but I don't know if it's too high and will clear when in overhand grip (suitcase mode)?

[@number1chiefROKKA]

could you tell us what hdmi to hdmi you are using please. it looks longer and i need that for my setup to work. thanks,

[@haklo71]

Hi, can I use SmallRig Baseplate on Weebill S ? Otherwise great videos, thank you.

[@PeterMakholm]

Yes mate, I also have it on my Weebill S. Works perfect.

[@haklo71]

@@PeterMakholm Very thanks. Great job, I keep fingers crossed. I'm a fan. :)

[@63MacGuy]

With only one screw on the side handle how do you keep it from turning / coming loose.

[@carolsoldea9223]

can you mount on that monitor mount a 7" monitor? it looks a bit too close and I'm worried

would Ulanzi quick release work with PeakDesign "capture" plate?

[@ManishSharma-pp2oh]

How too add phone for second display ? Phone connect with ney cable ? Can u explain.. thanks..

[@rosenkaraivanov9324]

What is your Hdmi cable for the camera monitor?

[@jsnpierce]

Will a phone fit in the monitor mount?

[@kickznlifts]

Ulanzi suitcase handle feels very cheap or did I get a bad item?

[@slayergamingyt1733]

Can the back handle be mounted on DJI RS3??

[@KCVisualz]

Can anyone confirm if the Gh5 with sigma 18-35mm f1.8 works with the DJI RSC2. Thanks

[@tomerharuvi4139]

I did what you recommended and my camera and gimabl keep touching the monitor! what should I do? I have 5" atomos shinobi...

[@jokerstudio7260]

What monitor are you used here ?

[@A1Bokeh]

I have the weebill s. Would this be an upgrade from that gimbal ?

[@anthonysyfilms]

Yes I made this same upgrade and the build quality is much better.

[@A1Bokeh]

@@anthonysyfilms saaaame

[@straitjacketstudios]

So is that basically the same geared base plate that comes with the new RS2? In effect giving you the same geared functionality for your RSC2?

[@PeterMakholm]

it has the gearing for the RS2 and fits perfect on the rsc2 as well.

[@straitjacketstudios]

@@PeterMakholm Can it actually take advantage of the gears on the SC2 though?

[@PeterMakholm]

@@straitjacketstudios no the gears does not work on the RSC2.

[@straitjacketstudios]

@@PeterMakholm Gotcha thanks! What a bummer. That is the only thing I wish my RC2 had that the RS2 has :)

[@PeterMakholm]

@@straitjacketstudios yes 100%

[@ezinwanneokoro8218]

Watched it through even though I'm a proud Weebill S owner . Thanks Bro

[@PeterMakholm]

Most of these accessories will also work with the weebill s. Still a great gimbal.

[@sarobar]

What monitor is that?

[@formx9796]

Will the monitor mount hold a 7INCH.?? MONITOR..

[@PeterMakholm]

Hi, I don't know it will be to heavy. It can take my andycine 6 inch without any problems. it will not fit on the gimbal the way i have it, only a 5 inch can fit on top of the handle.

[@andysillaber]

do you still love your Zhiyun Weebill S or do you prefer the DJI RSC 2 now ....????

[@PeterMakholm]

I still use the weebill s, but the stabilisation is better in the RSC2.

[@andysillaber]

@@PeterMakholm cheers !