Are mini and mini 2 se gimbals compatible with each other?
@djhuzi3 ай бұрын
But After the flash, we can put the stock firmware? Or not? My mini 2 crash from 30 meters... Don't go up and down the gimball. I had change the flat and the other cable but nothing... I have to think of send to dji...
@djiSolutions3 ай бұрын
Yes you have to install back to stock firmware, there are 2 cable for mini 2. Up and down motor control with the cable that also connect with camera.
@seagiy4162 Жыл бұрын
Good service and fast, thanks
@djiSolutions Жыл бұрын
Thanks for reviewing my service, I just do my best
@farhanfaiaj751 Жыл бұрын
Hi sir, I've got a problem with my Mavic Mini, when I turn it on, it works normally, the gimbal top motor starts moving normally and check axels but pitch and roll motor don't move . Why its happening? At first which cable i need to change (ptz or flat cable) ? I'm waiting for your suggestion. Thank you
@FPVFRASHA10 ай бұрын
hey! i have the camera calibrate error and wont let me record footage from the drone either now only from the goggles in my dji fpv drone after i changed the gimble to another one i looked at that python way to calibrate the gimble but it doesnt say it supports my dji fpv drone:( does anyone have any idea of what i can do to fix it please? its so annoying as i use it for capturing footage:(
@pawe8492Ай бұрын
witaj , przyjacielu , jak się z tobą skontaktować ? jestem z Polska?
@barrychan5637 Жыл бұрын
May I know if we can recalibrate the same for Mini3 Pro gimbal after replacement
@djiSolutions Жыл бұрын
Mini 3 pro also the same, it need calibration firmware to calibrate the gimbal
@gavingavin45726 ай бұрын
Do I have to do this with the mini 3 Pro as well?
@OumarMoctarKalibou3 ай бұрын
After replacing the cable I am getting error 40001 any help will be apreciated. Thanks
@KarlMaendel4 ай бұрын
I replaced my gimbal and my gimbal motors overloading...is there something stuck or do i have to hook it up to a computer and update the aircraft or whatever u did
@KarlMaendel4 ай бұрын
???
@djiSolutions4 ай бұрын
Because your camera is not point straight. Contact us on telegram
@KarlMaendel4 ай бұрын
@@djiSolutions whatya mean point straight I called with a guy he said only DJI can basically program the gimbal...is that true ?
@kamiko-i5g Жыл бұрын
What device do you use with android for the controller? looks cool
@djiSolutions Жыл бұрын
I use Samsung fold 2 😂
@cr_audiovisual2 ай бұрын
Donde consigo el archivo qur tienes para el Dji mini 2?
@derricktinsleyii93016 ай бұрын
How can i contact you to remotely fix my drone (incompatible gimbal error after gimbal replacement)?
@djiSolutions5 ай бұрын
Telegram or Whatsapp us
@casper667087 ай бұрын
What firmware for DJI spark gimbal calibration? Pls help
@Roman7628Ай бұрын
Cuanto sale cambiar el gimbal de un mini 2
@iamz3bra8482 ай бұрын
where do i get the software to flash?
@LeXro67 ай бұрын
When i try to use drone hack it says error restart software every time with dji mini 2 please help
@pawe84922 ай бұрын
calibrate Firmware ,where to get it ?
@floriandecort3379 Жыл бұрын
hey bro thank for de video but where we find you progrom? I made the last update today 01.07.0200 so it's not possible?
@djiSolutions Жыл бұрын
Yes possible, no problem
@RaulD-cs5qg Жыл бұрын
How much? Is the firmware free
@artiomchironda3135 Жыл бұрын
Hello everyone! Can someone help me? My DJI Mini 3 Pro drone landed in the forest and broke the gimbal. I have ordered a new one and installed it, but it needs calibration! Who can clarify the process for me? Thank you!
@djiSolutions Жыл бұрын
Telegram or Whatsapp me
@Quangthaivlogs-haydicungtoi Жыл бұрын
I really don't understand anything, please share how to do it and also the link about this update
@djiSolutions Жыл бұрын
Remotely fix, telegram me
@sandysanju6919 Жыл бұрын
Hey man my camera working perfectly of my mini 2 but in crash its gimble motors are not working i checked.... My wires are not broken but i felt that my motor section is failed after crash so i need this casing only...2:58.... So how can i get from you i mean i am from india......????? Can you help me out
@djiSolutions Жыл бұрын
Check my other video of fix stuck gimbal. Sometime your gimbal have dust inside but after clean it and it still not working. You should change gimbal.
@kemBALIMEDIA12 Жыл бұрын
I also had this problem my motor gimbal really hot make the plastic case melted, do you get the solution for that ?
@djiSolutions Жыл бұрын
@@kemBALIMEDIA12 It easy, change the gimbal because your gimbal is melted already. 😁
@kemBALIMEDIA12 Жыл бұрын
@@djiSolutions haha i know that but i afraid when i change the gimbal and after replace new gimbal malted again, do you have any solution for that ?
@TarunChauhan-x1j11 ай бұрын
My gimbal is crash so gimbal price repair cost sir
@papsnhelbeyondsky3 ай бұрын
how about mini2 se?
@djiSolutions3 ай бұрын
@@papsnhelbeyondsky we can remotely fix that. Telegram or Whatsapp us
@CleitoonReinert Жыл бұрын
how do i get the file to configure a new gimbool
@DanniieLTorres4 ай бұрын
How much is it
@djiSolutions4 ай бұрын
Telegram us
@Quangthaivlogs-haydicungtoi Жыл бұрын
Please help fully I hope so 🥰🥰🥰❤️❤️😂
@tomasfila3898 Жыл бұрын
I Have error 40002, please help me how fixed?
@djiSolutions Жыл бұрын
First step: check this video: kzbin.info/www/bejne/ip-md6ewor6glaM Sometime some dust can cost stuck problem. So clean it. If it still not working, check flexible cable or replace it before replace gimbal. Because it cheaper.
@Dronebaba1 Жыл бұрын
hello dear, where can i find DJI Error 40011 file??
@djiSolutions Жыл бұрын
You want to find file to fix the error 40011?
@Dronebaba1 Жыл бұрын
@@djiSolutions yes exectly....where to find the file for fix that error 40011 issue please help??
@djiSolutions Жыл бұрын
@@Dronebaba1 why don't you chat with telegram? In the description
@djiSolutions Жыл бұрын
I do, but there are many chat per day. Maybe Abit late to reply.
@daniell722611 ай бұрын
Witam. W moim dji mini 2 wyskoczył błąd kalibracji gimbal error 40011.Moja wersja firmware 1.3.000. Nie było nic robione w dronie. Dron jest mało używany. Czy da się to naprawiać? Bo nie chce wysyłać go na serwis. To raczej błąd systemowy. Czy za pomocą drone hack można to zrobić? Bo czytałem że tylko mini 1 można naprawić . Może jakoś mógł byś mi pomóc.
@laaganvlog478 Жыл бұрын
I'm from Philippines,. Plzzz.magkano software
@djiSolutions Жыл бұрын
Telegram me for more information: t.me/djisolution
@muzliamir3391 Жыл бұрын
Can i get this calibrate fw that??
@danyfraicheur8735 Жыл бұрын
Please i need the firware
@djiSolutions Жыл бұрын
Telegram or Whatsapp me
@utukutukcathouse155810 ай бұрын
Where firmware ?
@djiSolutions10 ай бұрын
Contact us
@laaganvlog478 Жыл бұрын
Mavic air plzzz
@djiSolutions Жыл бұрын
We also have calibrate firmware for all air models telegram me: t.me/djisolution
@Mr.LaughersLife Жыл бұрын
I want to downgrade firmware 01.05.000 to 01.03.000
@djiSolutions Жыл бұрын
Why?
@Mr.LaughersLife Жыл бұрын
@@djiSolutions so you can use the drone with hacks. with 01.05.000 there is no possibility
@djiSolutions Жыл бұрын
@@Mr.LaughersLife you want to remove error 40011 or you want to hack for other things.