The Electro-Voice EVERSE 8 Accessory Kit 🔥

[@cloudthedj]

Just got my Everse8 in the mail and didnt even know there was a tray. I was already blown away it had a DC out. This makes it even better.

[@KimcheeRacing]

The power output is 12v, 0.5a, 5.2mm x 2.5mm barrel jack. A lot of wireless mics take the same power config but use the more common 5.2x2.1mm barrel jack. I got a male to male 5.1x2.1 to fit into the everse by heating up one end of the barrel jack to the point where the inner plastic ring just started to melt and then shoved it into the 2.5mm end of the everse output and it worked fine. Not the proper way to do it but it was faster than splicing a new cable and the risk of damage to the speaker was still minimal.

[@djvelvetgrrl]

You're almost up to 11k, so that's good growth since you got 10k! I believe..... 100k here we come! 🥳

[@DJJoeBunn]

So close! lol

[@DJ.StevoD.Entertainment]

Joe, Got my set of two Everse 8's in white two weeks ago. Two bags and the Shelf kit! love it going to be a game changer

[@DJJoeBunn]

for sure.

[@spacebassgamerx8952]

Thank for all you bring to us Bunn

[@MHeisler777]

Hey Joe and everyone. I just bought the Everse 8 and I have the Sennheiser EW-D series mics and to whoever provided Joe with the link to the power cables above you sir/mam are a HERO!!!!! My ceremony rig can be carried in two hands pretty much. Works like a charm!!!! Saved me a ton of money having to buy a battery box...which I will probably regret when the first time the power goes out in my house and my wife says "Did you end up buying that battery back up thingy?"

[@FlatEarthSovereign]

What cord did you need for the ew-d?

[@MHeisler777]

@@FlatEarthSovereign The link is in the description of the video. It is actually 2 difference cables, a male end and a female end that make one cohesive cable. Click on both links there.

[@tjkaapuni]

Those cords worked to power my phenyx pro ptu-5000! 🔥

[@SherwinBajao]

GL on 100K!

[@allandenola5968]

Can you pack the shelf and the speaker the the bag - so never take the shelf off ?

[@DJJoeBunn]

I don't think so.

[@emeraldcitydjgil]

Love it Joe! As always great content!

[@DJJoeBunn]

Much appreciated.

[@sambrooks9208]

Love it!

[@TheRealDjMikeStone]

Awesome video! Just got my set yesterday. Do the tote bags come with a divider that goes inside where the two Velcro strip are sewn into the bag? Thanks again for sharing

[@DJJoeBunn]

Yes, it's in the bottom

[@TheRealDjMikeStone]

Thanks Joe. Love the video!!

[@TheRealDjMikeStone]

Sill need to get the power cable that goes from the mic to the speaker. But I’m loving the sound quality. Small and light and packs a punch!

[@spacebassgamerx8952]

Shut the front door... that is most Def on my list.

[@toneranger]

Cheers Joe, does the tray and receiver unit fit attached in the bag, so it can be added permanently? Because if it doesn't then the bag is pointless. Thanks

[@DJJoeBunn]

Yes, there is a bag divider I forgot to show!

[@toneranger]

@@DJJoeBunn Thanks Joe

[@djjeffrichards]

I'm going to put together a quick video, showing how to power TWO wireless mic's, with the Everse 8.

[@troyweber4118]

How? I've been trying to make it work but I was told I could only do one mic.

[@DJJoeBunn]

Can't wait to see it. Email it to me!

[@aaronthedj12]

Good video! Like that tray, even more, the power output! Brilliant. If both the mic and speaker are being used, at the same time, how much does that affect battery life vs not having the mic receiver plugged in?

[@DJJoeBunn]

good question

[@LimanolAdams]

I’m wondering, can the speaker with the tray, fit in the bag?

[@DJJoeBunn]

No, need to remove.

[@oldschooldjernie]

awesome! does that shelf kit come free with purchase? If so I will buy one. If not f-them

[@DJJoeBunn]

Unfortunately no

[@MarkBradbury-r8j]

Is there any reason I couldn’t power a Roland keyboard from the DC Power port? Both my FP30 and newer FP30x have the same size socket as the everse and you can buy a cable very cheaply online. Would really appreciate expert advice on this though.

[@DJJoeBunn]

I'm no expert. Not sure on that one.

[@mappenzellar]

Can this be used to power a dual wireless mic system? Guess as long as the DC out supports it??

[@DJJoeBunn]

Dual? Not sure. But it was def built to power mics. Just make sure you have the right cable.

[@edgarruiz8862]

Hey great video. Question are they making a slip cover for it. ? If so when and where to purchase

[@DJJoeBunn]

Yes, [e-mail]

[@djjeremyb]

Does the Everse8 fit in the tote with the shelf still attached or do you have to remove it every time?

[@Elniniss]

I’m wondering the same thing. The bag looks big but from the sides.

[@downtownsoundentertainment3508]

You have to remove the tray every time

[@djjeffrichards]

Mine is attached and comfortably in the tote. you do NOT have to remove it

[@DJJoeBunn]

The tray comes off.

[@dreamdaycharleston]

@@djjeffrichards attached with the mic receiver as well?

[@chrisskinner6483]

If you connect a mic and guitar to the one speaker, does all that mix go to the second paired speaker when using TWS?

[@DJJoeBunn]

Not sure if you can pair the two wirelessly, but yes if you run an xlr between them

[@chrisskinner6483]

@@DJJoeBunn i finally got to the bottom of it. Only the bluetooth channel 3/4 is shared between the two speakers wirelessly. In order to get your mic or instrument to both. You have to run an xlr from the mix out of one to the other:/.

[@chrisskinner6483]

@DJJoeBunn theres a q and a video where they answered this question on youtube.

[@DJGeek]

When you link both speakers via Bluetooth stereo can you hook up microphone on one and it play through the other one

[@DJJoeBunn]

Yes

[@chrisskinner6483]

@@DJJoeBunn no:/

[@bboymac84]

Dope

[@fabianomenezesb]

Hey Joe! I bought the everse a couple of weeks ago and i'm actually having some troubles with the 12v port...i'm trying to turn 2 pedals on with the 12v port, but they have the 9v voltage...so i bought a 12v to 9v converter, but the male doesn't match the everse port...it seems it has an specific mm size and i dont know if i can find a cable that fits...

[@fabianomenezesb]

I wonder if these cables you mentioned could work with the male on the converter i bought...

[@DJJoeBunn]

this is a Ben Stowe question, [e-mail]

[@christopherisiahlofi]

Can you DC out two wireless mic units? Like is there a dc Y cable for two? I use wireless Handhelds and lapels. Also how would you control volumes I may get one!

[@shaunswanson600]

I wouldn't think so as the power output wouldn't be strong enough for two units, but if you use a dual receiver it should work in theory.

[@DJJoeBunn]

Someonen in these comments said yes, I don't know about that.

[@shaunswanson600]

@@DJJoeBunn I am waiting for my cable to power a blx88 system with two handheld. I haven't seen anyone splitting to power two units yet.

[@longbine]

Wonder when these accessories will finally be in stock

[@benstowe7433]

Totes, batteries and shelves (only white left) are in stock at NLFX.

[@djvelvetgrrl]

Hi Jerry!! 👋

[@longbine]

@@djvelvetgrrl helloooo

[@longbine]

@@benstowe7433 looks like I missed the mark. White shows a Feb 3 expected release. Sent you a pm on Facebook. :) Thanks

[@raggaroaringsound]

@@benstowe7433 Do you think the whites can be easily spray painted black? Sick of waiting.

[@longbine]

Have you tried to a send the mic signal from the connected speaker to a separate one that is linked wirelessly? I have only been able to send the Bluetooth signal through and not the mic. Hoping it’s possible but not sure it is

[@DayNNyteDJs]

I have not tested it, but I have heard the answer is no.

[@longbine]

@@DayNNyteDJs yeah I have tried everything possible. Sucks

[@downtownsoundentertainment3508]

You’ll have to use a transmitter and receiver in order to be able to do that. Using Bluetooth for the microphone be very difficult because it will sound like an echo because it will have a delay. listening to your self speaking is very difficult I tried it once during a sound check and immediately change to wireless transmitter and receivers instead.

[@DJJoeBunn]

Didn't try that.

[@Kluksentertainment]

Does the EV R300 have the same adapter power cable as what is shown in the video?

[@DJJoeBunn]

Unsure

[@thomashinds5668]

What is the actual distance from the back of the microphone receiver to the XLR inputs ? Would a 1 ft cable belong enough?

[@cryptomikey9695]

Yes Thomas 1 Foot is PERFECT!!!

[@DJJoeBunn]

Should be about right.

[@DJCharlieBgcp]

Is there a list of which receivers can use the power cable in the accessories kit? Still waiting on my kit, and I use the Shure BLX4R

[@scottjohnson1595]

I hit NLFX up when it first came out and they were going to test it with all of the mic receivers. I too use the BLX system and inquired about it. Even if the one that comes with the kit doesn’t work, they can make you one that is compatible.

[@DJCharlieBgcp]

@Scott Johnson they can, but they won't right now. I emailed NLFX and they said they are backed up with existing orders and aren't taking any new ones.

[@DJCharlieBgcp]

@Scott Johnson however funny story, if you ever bought an ECOFLOW power bank, one of the accessories that came with it was a dc to dc plug that is a perfect fit. I got lucky and found mine. Don't bother hitting up ecoflow for one tho, they are sold out of them. They were selling it for $50 if you bought it by itself. Not worth the price if you ask me!!!

[@DJJoeBunn]

[e-mail] can make anything for any mic.

[@DJCharlieBgcp]

@DJ Joe Bunn yea but after messaging him, he says they aren't taking new orders right now. I found a solution thru Amazon for my application anyways. Also just to note, the cable provided in the kit which I finally received, does fit my shure receiver.

[@THEOFFICIALSPACEBASSDJ]

Shut the front door... I'm most Def putting this on my list. Yes... I'm also SPACEBASSGAMERX. Thank you for all you do Bum

[@thel1227]

Everse 8 app need volume control for the mix output..

[@raggaroaringsound]

Does it fit in the bag with the receiver on top?

[@downtownsoundentertainment3508]

You have to disconnect the tray from the speaker in order to zip the hood of the everse 8 case. There is, however, enough room to place your receiver, and the tray on the side.

[@raggaroaringsound]

@@downtownsoundentertainment3508 So they didn't actually think of everything with this speaker/bag. If the bag only fit the tray and receiver it would simplify the setup that much more!

[@DJJoeBunn]

no

[@troyweber4118]

OK! All we need now is an EV Umbrella attachment for the very top ;)

[@DJJoeBunn]

At least it's somewhat weather proof.

[@troyweber4118]

@@DJJoeBunn I was also thinkin' it would provide a nice shade 🌞

[@darrinbridgman3002]

What's the Battery life? With and with out a mic attached

[@DJJoeBunn]

Might have to hit up EV for that. I never got to the end of the battery life after doing a gig.

[@troyweber4118]

I was able to power one sennheiser EW- 100 G4 but having probs getting good quality sound with my Lavalier mic. Feedback issues but still trying different settings. Anybody really good a this?

[@DJJoeBunn]

Not sure about that. I assume the mic gain is too hot. Like you need to go in the menu on the transmitter and/or receiver and come down.

[@thel1227]

Make a convertible bag that you can play live without taking it off like jbl JBL BAGS Convertible Cover for EON ONE COMPACT

[@sambrooks9208]

👍👍👍

[@miguelhaddadchavelas7454]

Anybody has problems with the color white ??

[@DJJoeBunn]

I don't understand the question.

[@miguelhaddadchavelas7454]

@@DJJoeBunn Hi Joe, the speaker in color white scratches and gets very dirty?? I love that everse, in color white than black.

[@DJJoeBunn]

@@miguelhaddadchavelas7454 no problems here. Always keep in the bag. Use clorox wipes to clean.

[@miguelhaddadchavelas7454]

@DJJoeBunn thank you so much. I'm a new subscriber

[@darrinbridgman3002]

Lmao...He said..Thick Bottom...BAHAHAHA

[@georgchekinoff239]

Hi ! Yesterday I received a package with a new Everse 8 battery. I shot a 7-minute video about the EV Electro-Voice backup battery for Everse 8: unpacking and charging the new battery for the first time. Why do the instructions say about 24 hours if the speaker display showed FULL after 2 hours and 22 minutes and turned off? Of course, I didn't disconnect from 220 volts anyway, but what does it change if the BMS board turns off all electric currents when the battery is fully charged? kzbin.info/www/bejne/qGjSZnSZeNqdf9k

[@michaeldoucot3768]

Hey George - do you have standby mode enabled (ships that way from the factory for eco rating purposes). Speaker shuts itself off after a period of time without receiving any audio signal. Sounds like that is probably the issue here...

[@georgchekinoff239]

​@@michaeldoucot3768It seems to me that the Internet Google translated the meaning of the topic from Russian into English incorrectly) I'm not talking about standby mode. I know about it. That's not the point. In my video from the last comment, everything is clear about what is being discussed I wrote about the first charge of the newly purchased battery for Everse 8 and shot a video of how I connected the speaker to 220 volts when it was turned off. I thought that the speaker would be charged with 100% energy in 24 hours, but it was charged after 2 hours and 20 minutes. It turns out that it makes no sense to charge the Everse 8 from 220 volts for 24 hours. I plugged it into a 220 volt outlet anyway, because that's what the instructions say. Perhaps, after storage in warehouses, with such a connection to 220 volts for 24 hours, some kind of optimization occurs so that there are no unpleasant surprises before use and next charges.