Custom Video Dj Booth Build

This video is about the process I took to build a custom video DJ booth. Very similar to a Toadmatic booth.
all said and done I have about $1000 into this booth. Below is the parts list.
6 12ft sticks of 2x2 aluminum tubing $300
6 8ft pieces of PVC trim
12 corner blocks
1 base board 8ft pvc
2 1/8th inch panels 24x48
2 1/2inch panels 24x48
1 36x48 .096 plexiglass
4 locking 4in. casters
1 48inch 1inch angle
2 48in 1/2x1/2 angle
1 55inch tv
1 laptop arm amzn.to/2NoTFxP
Sennheiser G4 amzn.to/3a8dnaI
My Photobooth
Salsa Booth:
pbsco.refr.cc/l...
Vault Link:
djlostax.krtra...
The best wedding event app for DJ's
vibo.io/
Tell Michael i sent you for a killer deal!
www.bpmsupreme.com
use Promo Code: LOSTAX30 for 30% off
Rockville Totems amzn.to/2DPBSen
Gravity Stand amzn.to/2H4aDP6
Sennheiser xsw-d amzn.to/2KvgvkM
------------------------------------------------
Social Media
Facebook / dj.lostax
Snapchat dj.lostax
Instagram @djlostax @lostaxentertainment
www.lostaxentertainment.com
------------------------------------------------
Dj Equipment
Rane 62 amzn.to/2wo5J94
Technic 1200mk5 amzn.to/2PG4DOO
Pro x side by side case amzn.to/2BS3ErP
Crane stand amzn.to/2Npb2fR
Pioneer HDJ x7 amzn.to/2NrZloN
Jackery 20800mah battery pack amzn.to/2U972Xp
Gravity Stand amzn.to/2VJ62Kb
Onstage Stand amzn.to/2ngk0UZ
Speakers
Mackie SRM450v2 amzn.to/2Noa7MD
Mackie 1801 Subwoofer amzn.to/2LvKHLl
Gravity GSACC35B SACC 35 mm Speaker Pole Cable Clips amzn.to/2Npcrmv
Microphones
Fifine lav mic amzn.to/2ocuh0W
Shure SLX4 amzn.to/2H12sBL
-----------------------------------------------
Lights
Chauvet Slim Par 38 amzn.to/2PDxaV8
Chauvet Slim Par 56 amzn.to/2wvfYbw
Chauvet ez Par 56 amzn.to/2PJbLdh
Chauvet Slim Par 64 amzn.to/2BUiVso
Chauvet Slim Par Bag amzn.to/2wq9D1f
Chameleon Qbar Pro Wifi amzn.to/2ogE46o
Adj Airstream Bridge amzn.to/2BRKBOz
ADJ Stratec Stinger Spot amzn.to/2PIFymb
Chauvet FX2: amzn.to/31r1ZC7
Table Scrim amzn.to/2LBii6I
Onstage Speaker Scrims White amzn.to/2BROGlF
Onstage Speaker Scrims amzn.to/2BROGlF
Rockville speaker stands amzn.to/2NrJSFc
Rockville Facade amzn.to/2ohnymI
Ceremony Mixers
BEHRINGER XENYX 1202FX
BEHRINGER XENYX 502
Camera Gear
Canon G7X mII amzn.to/2VNg514
Canon SL2 amzn.to/2PHOKqY
Joby Gorilla Pod amzn.to/2woMH2o
GOPro Hero 5 amzn.to/2wufItt
Sandisk 32gb Card amzn.to/2Eqm18g
Sandisk 64gb amzn.to/2CjXGei
--------------------------------------------
Send Mail To
P.O. Box 20112
Kalamazoo, MI 49019
--------------------------------------------
For Business & Booking Inquiries Contact to me at
[e-mail]

[@DJLoStax]

all said and done I have about $1000 into this booth. Below is the parts list. 6 12ft sticks of 2x2 aluminum tubing $300 6 8ft pieces of PVC trim 12 corner blocks 1 base board 8ft pvc 2 1/8th inch panels 24x48 2 1/2inch panels 24x48 1 36x48 .096 plexiglass 4 locking 4in. casters 1 48inch 1inch angle 2 48in 1/2x1/2 angle 1 55inch tv 1 laptop arm amzn.to/2NoTFxP Sennheiser G4 amzn.to/3a8dnaI My Photobooth Salsa Booth: pbsco.refr.cc/logans Vault Link: djlostax.krtra.com/t/hE4JHYIG... The best wedding event app for DJ's vibo.io/ Tell Michael i sent you for a killer deal! www.bpmsupreme.com use Promo Code: LOSTAX30 for 30% off Rockville Totems amzn.to/2DPBSen Gravity Stand amzn.to/2H4aDP6 Sennheiser xsw-d amzn.to/2KvgvkM ------------------------------------------------ Social Media Facebook facebook.com/Dj.LoStax Snapchat dj.lostax Instagram @djlostax @lostaxentertainment www.lostaxentertainment.com ------------------------------------------------ Dj Equipment Rane 62 amzn.to/2wo5J94 Technic 1200mk5 amzn.to/2PG4DOO Pro x side by side case amzn.to/2BS3ErP Crane stand amzn.to/2Npb2fR Pioneer HDJ x7 amzn.to/2NrZloN Jackery 20800mah battery pack amzn.to/2U972Xp Gravity Stand amzn.to/2VJ62Kb Onstage Stand amzn.to/2ngk0UZ Speakers Mackie SRM450v2 amzn.to/2Noa7MD Mackie 1801 Subwoofer amzn.to/2LvKHLl Gravity GSACC35B SACC 35 mm Speaker Pole Cable Clips amzn.to/2Npcrmv Microphones Fifine lav mic amzn.to/2ocuh0W Shure SLX4 amzn.to/2H12sBL ----------------------------------------------- Lights Chauvet Slim Par 38 amzn.to/2PDxaV8 Chauvet Slim Par 56 amzn.to/2wvfYbw Chauvet ez Par 56 amzn.to/2PJbLdh Chauvet Slim Par 64 amzn.to/2BUiVso Chauvet Slim Par Bag amzn.to/2wq9D1f Chameleon Qbar Pro Wifi amzn.to/2ogE46o Adj Airstream Bridge amzn.to/2BRKBOz ADJ Stratec Stinger Spot amzn.to/2PIFymb Chauvet FX2: amzn.to/31r1ZC7 Table Scrim amzn.to/2LBii6I Onstage Speaker Scrims White amzn.to/2BROGlF Onstage Speaker Scrims amzn.to/2BROGlF Rockville speaker stands amzn.to/2NrJSFc Rockville Facade amzn.to/2ohnymI Ceremony Mixers BEHRINGER XENYX 1202FX BEHRINGER XENYX 502 Camera Gear Canon G7X mII amzn.to/2VNg514 Canon SL2 amzn.to/2PHOKqY Joby Gorilla Pod amzn.to/2woMH2o GOPro Hero 5 amzn.to/2wufItt Sandisk 32gb Card amzn.to/2Eqm18g Sandisk 64gb amzn.to/2CjXGei -------------------------------------------- Send Mail To P.O. Box 20112 Kalamazoo, MI 49019 -------------------------------------------- For Business & Booking Inquiries Contact to me at [e-mail]

[@djtweezy06]

Does your total include the frame?

[@DJLoStax]

Yes. This was a few years ago though so aluminum prices could have gone up

[@djtweezy06]

@@DJLoStax Thanks for the feedback. I am a DJ in Oakland County of Michigan, love your video's. May one day we will rin pass each other. Keep up the great work.

[@kellyaustin7487]

Before I go in on this video let me first say that I think your craftsmanship and execution looks amazing. Now the story I experienced...as i was performing for a party in a banquet hall I finally saw the best dj I had ever seen. He was playing for a party in another room similar in size just up the hall. I stopped by to introduce myself and as I was closing in on this dj I noticed his gear sat on top of a basic rectangular banquet table with black table cloth and skirting. Also his lighting was older adj pieces still doing the job. His speakers were older cabs but definitely thumping based upon what I was feeling and hearing. But this dude was a true DJ/MC and had the crowd straight moving. His party mixes were extremely tight and all live. No party mix tapes type of shit. But the party was all the way live and I'm pretty sure nobody noticed or cared about his set-up. They were too busy jamming on the dance floor and having a good time. Shout out to DJ Nice-T if your out there. No gimmicks, gadgets, or other just excellent DJ and MC skills all night long. He's the one getting paid without unnecessary spending and surplus. I learned a lot about what customers really care about that night. Clients always need to be cautious as looks can be deceiving! This guys card leads to a link of very satisfied customers. I realized some of what I thought was cool or important was only stroking my own ego. Just my thoughts. Not ment to suggest anything negative. Again your craftsmanship is amazing. I hope you and your clients enjoy it. One love.

[@DJLoStax]

All very true. Fancy equipment does not make for a great dj. I went the better part of 10 years with the same technic 1200’s and rane 57sl. Still running a 2012 MacBook Pro. However what I’ve found is as I raise my prices clients DO start to pay attention to your set up. (Example would be my all white set up. Brides love the look and want it at their wedding) also this booty has a lot more to offer than just looks. It’s going to cut my set up time down tremendously all while allowing me to use the tv for monogram or video/ slide shows. It’s still cold as balls here in Michigan so I haven’t had a chance to finish the booth but once I do I will shoot a set up video showing how fast it will make things for me.

[@kellyaustin7487]

@@DJLoStax Awesome brotha. What part of Michigan may I ask?

[@DayNNyteDJs]

When you first started and it was aluminum tubing, I thought... where's he going with this? By the end of the video I was ready to start building one for myself. Great job. You should be proud of that one.

[@DJLoStax]

Thank you! Took some inspiration from others I’ve seen and a little imagination but I got it done. I also ordered all the things to finish the wiring And mic rack area so an update on that will be coming soon as well.

[@deejayfal]

Nice job. I'm so impressed by folks like you that can build something from the ground up! Very classy presentation.

[@DJLoStax]

Thank you Dennis it was a fun project but a lot of work for sure. It’s going to pay off huge for me in both set up time and presentation. I can’t wait to get it out for some events

[@roberttorres7233]

Amazing! Great elegant look that will separate yourself from others. Brides are going to love it!!!!

[@tonysilva4988]

Congrats on your custom booth. Your wedding expo setup looked great. 👍🏽

[@DJLoStax]

Thanks! We definitely stood out!

[@steveheath747]

Very Innovative! You really thought it out before you started your build. It looks fantastic!

[@RoyalSingleton]

Nice

[@djnoni14]

Booth Looks awesome Logan!! Great Job!!

[@yescasalfonso8232]

dude that booth came out dope!!!

[@TruNorthProductions]

Damn dude!! That is sick!! Cant wait to see it in action!

[@mmoran972]

Very Impressive! Great job!

[@HI_Certified]

This is SUPER DOPE! I'm no wedding Dj but this would be cool project to build. Great job!

[@georgethedj4946]

Very Impressive set up! Your passion for what you do is obvious. The videos are relatable. Real stuff like: “see you in the morning” and then, “ ok I lied”. Cause your’e still up working on it past midnight. I can relate. Lol. Or acknowledging a bad cut or error along the way. No doubt that the end result is Very Professional but it’s fun to see and hear thoughts along the way.

[@djdannybhtx]

DOOOOOOOOOOOOOOOOOOOOOOOOOOPE!!!!!!!!! FANTASTIC JOB BROTHER!!

[@DjMilliano]

Man this is nice!! I need one

[@BigBlockEntertainment]

Awesome Video man!! Thanks for sharing!! Always looking for new ideas to help stand out!!

[@TheRealDjMikeStone]

If you decide to build these I would love one. This is freaking awesome dude!! Just came across your channel. Keep up the good work!

[@RealLifeDJ]

Looked impressive in that picture at the end 😎🎧👍🏻

[@5thElementDFW]

Definitely looks wicked! My thing with this concept is it’ll get covered once the dancing starts. At least the way most events are setup for me. No stage, centered on the dance floor. But it’d be really nice to have.

[@DJLoStax]

I can understand what you mean. My thought on it is the presentation is just awesome. It’s going to speed my set up time up a ton and I will be using it mostly as a way to show engagement or family photos early in the evening before open dancing starts. After that I’m think i will likely switch to a monogram or some sort of image.

[@carlosavalos4112]

Good job! Looks awsome. Maybe next year when I get a van to transport it. Let me know if you build and sale some.

[@MikeHolidayDJ]

Looks so good bro! Great job!

[@Earthcitizen4609]

Im impressed 😮

[@ClifeDJCompany]

Well done Logan!!

[@allengallegos7238]

Nice job 👍

[@j007warren]

I'm a DJ out of KY and have been scouring the internet for DIY Video booth ideas. I think you nailed it with this one. Is there any way you could provide the measurements of your aluminum frame? TIA!

[@SurfSk8Snow100]

Really wanted to see how you installed the tv

[@someonesaidyes]

Mad fresh. Only a G in cost? Time to scale up your production and launch a booth building biz.

[@DjMixstyles]

Dope build bro!!!!!

[@shabornafallah7625]

Great work I love it , just wish you would have showed how you put the tv in there. I'm about to do one myself.

[@Barrygreenexprealty]

Very nice. I only have one suggestion..... Make me one..... haha

[@djcalvin681]

Beauty !

[@MrDjchompiras]

Hi there, thank you for sharing, how heavy would you say in this project? Tia

[@nigelweir7885]

Hi my name is Nigel I saw your video what is the measurement for a DJ video booth I'm thinking about building one 32"TV costum made

[@djmoE80mo]

I love the design.. What are the specs

[@PaparazziEntertainment]

This looks cool but how do you transport this must be super heavy what about Stairs and do you have a cover for it? It would have been Awesome if the whole thing was Aluminium then powder coated but probably super expensive when I saw the aluminum tubing that's what I thought it does Look Impressive and the DJ Expo set up looked Amazing congratulations

[@claudiovalero6449]

Thanks for sharing that just says alot of you you’re not in it for the money you’re in for the humbleness and the drive and the help for others, i was waiting for a video like this for the longes i build something similar but it didn’t work with your video i got a better idea.

[@Carlos.Radders]

Mint! 😉👌

[@dj2big]

Can you show how you mounted the tv

[@aqgaqg6777]

Thats a clean booth, bog up, tho i would have taken a different route

[@kevinflanagan8538]

NICE!

[@JohnLeyMystikmusic]

what would you do different next time?

[@djchrisbouchard]

This looks good man! How’s it holding up? I really need a booth because of an injury. But don’t wanna wait for Toad and others to produce one if I can do it myself.

[@DJLoStax]

It’s holding up very well I did have to go through a little trial and error before I found an adhesive that would stick well to the aluminum I also had to rough up the aluminum to get the trim to stick

[@djchrisbouchard]

@@DJLoStax What adhesive did you use? As I have been putting plans together I have been thinking about the use of screws, or adhesives, or both.

[@djmounirmontpellier2303]

Hello .. is it possible to send me the manufacturing plan please ??

[@djtwaynesworld2568]

Do you have the measurements for the booth?

[@rickneiheiser5091]

PVC looks great until it’s gets scratched or dinged. How do repair it

[@DJLoStax]

Magic erasers and a heat gun. It’s actually way more durable than wood.

[@totaleventaudio3348]

Would love the plans for the aluminium structure

[@DJLoStax]

Shot me a message on Instagram I can send it over to you

[@djwill9166]

I'd love the have the plans as well.

[@djwill9166]

@@DJLoStax I'd love the plans as well. Thank you in advance.

[@ronnyparrish1368]

@@DJLoStax how can I get the plans for the structure?

[@djmikebuck6341]

Nice build! Excellent craftsmanship. Are you a carpenter by day?

[@DJLoStax]

Thank you. Not a carpenter by day but I would say building things is one of my many hobbies.

[@ebnyflyer]

Tight Video Dj LoStax.. Subscribed.... Did you plan from the the beginning to trailer this to your mobile gigs? Looks like a two person move.

[@DJLoStax]

Yes the plan is to trailer it. I have a 6x12 enclosed trailer.

[@VibeBooth]

Amazing build bro you could sell these 💯

[@DjTravisNey]

awesome booth. let me ask, what do you use to transport it to your shows? a trailer?

[@DJLoStax]

Yes I have a 6x12 enclosed trailer

[@TheSethGZ]

Booth looks amazing! where did you get your backdrop for the expo?

[@DJLoStax]

It’s actually just the giant rose back drop from PBbackdrops.com and I projected my logo on it.

[@nyguy4u]

Nice job on this. Question - what are your side panels made out of? Like a white fiberboard?

[@DJLoStax]

Pvc panels.

[@nyguy4u]

@@DJLoStax Appreciate the reply. Where did you get the panels from? Home Depot? I can't find it anywhere locally where I live. How is this holding up for you?

[@DJLoStax]

Yes Home Depot. It’s held up really well. I love the pvc because it’s not painted so no worries about paint chipping or anything like that

[@nyguy4u]

@@DJLoStax Love it. Good to know. Last question, I promise lol.. you just simply pre-drilled and screwed the pvc into the metal frame? And glued on the trim pieces?

[@DJLoStax]

Yep exactly. Them I used white caulk on all of the seams to tie everything together. I’ve had to touch up some spots but it’s held up well over all. It’s gone out to 13 weddings this year so far and all I’ve done is wipe off some spilled drinks

[@TheLjdevlin86]

Wow! Awesome build! Where are you gonna get your monograms from? Or do you create them? Thanks!

[@DJLoStax]

So far I’ve been making them myself

[@DjPositiveP]

Looks sick brother! Great job! Are you going to mobile beat las Vegas this year?

[@DJLoStax]

No I won’t be at mobile beat. The next conference I’ll be attending is Midwest Dj’s live.

[@johndeggendorf2595]

@@DJLoStax IF you go to MWDJL next year let me know. Id like to meet you

[@DJLoStax]

I’ll be there

[@djbenefit]

I just built one myself. 1.5” extruded aluminum with a 50” tv on the front. Very similar in design. I like yours better because it’s all white with trim. Mine is aluminum with black ABS plastic. Looks like a road case. Very nice work, bud. You can check mine out On a couple of videos on my channel.

[@djdnewworld]

What are the measurements?

[@KevinNicholsDJ]

I'm curious how you mounted the tv without using the mounting holes.

[@DJLoStax]

It’s just pinched between the rear shelf support and the aluminum angle I mounted to the frame. It’s not going anywhere without removing that support.

[@dcentertainmentpa]

@@DJLoStaxIf something happens to the TV, would you have to take the booth apart to change it?

[@DJLoStax]

Yes but it wouldn’t be hard. Just 4 screw on the top shelf and 2 holding the bracket in place behind the tv. I wouldn’t have to remove any trim or any of the decorative pieces.

[@startimenigga]

put the glass and etch your dj name

[@timburns5220]

Shut up and take all my money!