Thanks to Darius K for the suggestion on this video. Got something you want to see? I read the comments :)
Пікірлер: 40
@rossssd49695 жыл бұрын
So many professional sound crews don't do this. It enrages me
@VoyageOne13 жыл бұрын
Great video. When connecting high end DJ gear together like the Nexus/Prime kit, you should be using the SPDIF for a few reasons: 1. It avoids a step of DA/AD as the signals exit the players and go into the mixer (which can introduce noise and artefacts). 2. It bypasses the line inputs which can be clipped. While analog distortion has a rather pleasing “crunch” (Xone 96), digital distortion sounds horrible 3. It’s less cables to mess up 4. It keeps the line inputs clear for other DJ’s sharing the mixer that need them 5.It's one more improvement I can make to the overall sound quality of my setup
@eletronicagomes4427 Жыл бұрын
In my view using digital outputs won't improve sound quality, specially in nightclub's sound system cause they aren't HiFi concepted in 95% of cases. Before the speakers the signal will be majority converted in analog system. For example: this mixer can reach 40kHz according Pioneer's manual. But it's known the human ear can reach 20 or 22kHz. After this, no one can hear; they just can see it using especial equipment. And trust me: this "feature" won't improve sound quality. To be honest, it's just foolish technology to justify their prices.
@djsarumawashi8 ай бұрын
UAUU LEARNED something very Important😀😀😀 GREETINGS from CABO VERDE ISLANDS🤩🤩🤩
@darive960011 жыл бұрын
Hey, thanks man! :) Just wanted to know about it! Because I see a lot of DJ's using it these days! Thanks again! Have a great week! :)
@MC-017 жыл бұрын
thank you for the advice I always use RCA'S because it is the only one to connect the CDJ'S
@AlessioBuso5 жыл бұрын
you shouldn't use non coaxial cables...
@AlessioBuso5 жыл бұрын
Normal RCA Cables DON'T work just fine for digital. Wrong infos
@Emontop19 жыл бұрын
Thank you so much for the quick tutorial . Cheers.
@djbbarcellos54264 жыл бұрын
Nice I bet lots of ppl had questions regarding things you mentioned in this video. I would have been cool, just for case inpoint, if you connected booth the cdj digital and rca output into the mixer and payed someting then switch thet imput selector on the mixer. like i said. just to demostrate your point. thanks again, I was here because i was being sold on "special" digital audio rca. and I was researching if I could use the cables I have. thanks again
@bboymac844 жыл бұрын
Digital wont clip and has better quality!
@OneBadAssDJ10 жыл бұрын
Thanks for the help. Great video.
@christianjackson11 жыл бұрын
Will do :) Trying to be the new and improved ellaskins :)
@OfficiaLUCCA11 жыл бұрын
Could you maybe do a tutorial on features on the mixer?
@ruix012 ай бұрын
If use digital ins, do the “analog” work, all of them?
@OfficiaLUCCA11 жыл бұрын
Great video you should keep doing tutorials or even stuff like ellaskins does :)
@darbomusic3 жыл бұрын
Awesome 😍
@cconnerolson9 ай бұрын
Can you use the mixer’s digital output with a portable recorder in the same way you would use the RCA record out where the level is decoupled from the analog master our level? Could be a dumb question but also do any of the zoom-style recorders accept that digital signal as an input?
@trurock14 жыл бұрын
Thnx for this. I know it’s old, but I’m order to use the link, do I still need to use the cat5 cables? Or would it just work with digital?
@kutasimusic8 жыл бұрын
Is there any difference in sound quality compare to the standard analog RCA? Thanks!
@luka_wher38698 жыл бұрын
in my opinion there is no difference
@earthboogie71267 жыл бұрын
It will do depending on the application, quality of file played, and sound system. It will especially if you use the digital out of the DJM to a digital X-over. Otherwise it's file (digital) D/A to analogue signal out the CDJ, then A/D to digital in the mixer, mixer then D/As it back to analogue, then most like A/D to a digital crossover, then D/A back out of the crossover into the relevant amplifier.
@trancepower12055 жыл бұрын
If theres no difference whats the point?
@novvamusik3 жыл бұрын
@@trancepower1205 less cables, less mess
@The070593 жыл бұрын
what is actually the protocol use on that digital output???
@reyiiteleco2 жыл бұрын
SPDIF
@The070592 жыл бұрын
@@reyiiteleco Thanks
@djlos1158 жыл бұрын
when using digital,are all the c djs in sync with one another,
@johnshaughnessy31654 жыл бұрын
hi folks,one of my cdj2000 nexus players when i plug in the 2 rca outputs and plug into my djm900 nexus mixer i get no input to the mixer and of course no output,i have the channel selector on cd/line.but if i plug into the digital output on the cdj and into the digital input on the djm900 and select the knob to digital i get both signal in and output perfectly.any one have a clue why this is.strange problem.cheers john
@Ali-sr2ec7 жыл бұрын
Hı . Why do you ise only trs output only?
@reyiiteleco2 жыл бұрын
What protocol is accepting this input in the DJM-900 nxs2 ? and sampling rate and bit depth ?
@reyiiteleco2 жыл бұрын
Found it, here for other interested: Input format: S/PDIF Sampling frequency: 32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz Sampling bits: 16/24 bits source support.pioneerdj.com/hc/en-us/articles/4405915517977-What-are-the-digital-input-specifications-
@Dj_OLD_MATEАй бұрын
Not identical signal at all bro. Digital signal had one less conversion
@drnockaable6 жыл бұрын
So that's a left and right signal ?
@eletronicagomes4427 Жыл бұрын
No. In digital domain there're no left/right connections cause the signal is converted in bits using one cable and reconverted in other equipment using an internal decoder. Those bits carries the information about left/right signals.
@FunctionGermany2 жыл бұрын
i think the biggest advantage of digital is that clipping can't happen.
@eletronicagomes4427 Жыл бұрын
Yep, and the music will sound like shit cause some DJs (80% of them) have no idea how dynamic range works in analog domain.
@FunctionGermany Жыл бұрын
@@eletronicagomes4427 wdym? if you raise the gain too much on analog, it clips. with digital, it gets limited and ruins the dynamic range, but won't clip.
@marcosa.catena64147 жыл бұрын
if you use RCA inputs, will the mixer enables digital output from the coaxial output ?
@eletronicagomes4427 Жыл бұрын
Yep, cause the mixer converts all analog signals to digital domain before send them to S/PDIF outputs (analog signals are CDJs using RCA connections, turntables and microphones).