RC ADVENTURES - D10T DOZER gets a Sound Upgrade - RC4WD 1/14 scale DXR2

What a great day for me to "Rip into" my 1/14th size model Bulldozer and give the viewers a look. My buddy "Krazy Joe" has always complained I set the controls up "backwards".. so this time, I made sure they were acceptable - and no excuses for poor performance can be made. HAH! Im just kidding of course, and today I swap over my Flysky Radio FS-i10 - and then hook up my ESS-Dual Sound kit. This kit I purchased at Asiatees.com and I really think they are the most versatile sound kit available today. I left Information on all of my gear down below. I hope it helps you!
SUBSCRiBE & “Ring the Bell" ► bit.ly/JOovvU
SOUND KIT: ESS DUAL - Asia Tees: bit.ly/2Ct2Ol2
DOZER:
From the RC4WD Website: bit.ly/2LpPhzi
1/14 Scale DXR2 Hydraulic Earth Dozer - RC4WD
"The Earth Dozer DXR2 is an amazing marvel in engineering and function. It offers remarkable adjustments to the bucket to allow for those demanding jobs. In case you have some hard pack that needs work, the rear ripper will shred though anything in its path. This Dozer is ready to do work and comes fully assembled.
Specifications:
Alloy Zinc and Alloy Aluminum Casting (except Track and Hydraulic Pump)
Weld Steel Bucket
9 Channel 2.4GHZ Radio
Heavy Duty Hoses (OD 3.2mm Nylon, ID 2.2mm)
Main Heavy Duty Hoses (OD 4mm Nylon, ID 2.5mm)
Optimized Steel Hydraulic System
Reliable Hydraulic Valve and Adjustable Pump
Brushless Hydraulic System
Full Metal Scale
All Terrain Metal Crawler
540 Brushed Monster Torque Motor
Full Metal Transmission (1:256 Gear Ratio)
Run Time is: 38 Minutes (5300mAh Battery)
Chrome Steel Oil Pump (47.5mm x 35mm x 36mm)
Bucket Capacity: 494949 mm_
Maximum Bucket Force (Down): 76kg / 167pounds
Maximum Bucket Force (Up): 50kg / 110pounds
Maximum Bucket Force (Thrust): 50kg / 110pounds
Driving Speed: 408 Meter Per hour
Scale: 1:14
Length: 27in / 685mm
Width: 13.8in / 351mm
Height: 12.7in / 323mm
Bucket Height: 6.87in / 174.6mm
Maximum Bucket Up and Down Angle: 29 degrees
Maximum Bucket Tilt Angle (Left and Right): 9 degrees
Maximum Ripper Depth of the Ground: 1.97in / 50mm
Total Mass Load: 37kg / 82LBs
Operating Oil Pressure: 25Bar, 362.5psi
Dead Weight: 26kg / 57LBs
Manufactured by JDCustoms
30 Days Limited Warranty"
"1 Million Views Club": bit.ly/2AYVrAF
RCSPARKS Shirts & MERCH: shop.spreadshirt.ca/RCSPARKS/
RC ADVENTURES™/ RCSparks Studio™ © 2018 Medic Media Productions Inc. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Medic Media Productions Inc.

[@TheRealRCSparks]

Thank you all for being patient, while the muscle in my back is repairing! Torn muscles take up to 6 weeks to heal... Ouch! Heh.. great time for me to get in some shop work.. when I can! Miss you guys!

[@sephlyon3403]

HE LOLLOL

[@brockriemer1929]

Hey can you plow lots of snow in the winter with that?

[@chriswabinga9695]

Get well soon

[@TheRealRCSparks]

+brock - I will see what I can do for you bud.. I cant do it when it gets really cold, becuase the hydraulic fluid gets too thick.. but yeah, i will do a plow video for you man :) Will you hit that notification Bell so you can be alerted when I do it for you? Thanks!

[@ajstoybox4300]

Glad to see your feeling better! Great show as usual 👍👍👍

[@danon-theautisticmaker8112]

Those solder connectors are pretty sweet! I hadn't seen them before, thank you for using & showing those.

[@docr7913]

Great tip on the connector Medic! I will be using those for now on, will also help on the model railroad buildings. You just saved me some frustration. Thanks. Good luck on the recovery!

[@NordicRC]

That really is an amazing machine. And wow. those solder connectors really are genious! Thanks for sharing the tip. You always got some goodies to share ☺️

[@TheRealRCSparks]

Nordic, I always am searching.. for new and exciting things to make the RC Addicts lives full of smiles, and helpful tips! Thank you for being here with us :)

[@TJsRC]

That horn tho 😂 Thanks for the tour of that big beast. What amazes me is the tiny hydrolics. Hydro power for the win.

[@MyPuppers]

that was fantastic ! what a mean machine , thanks for the tour . was fun watching .

[@TheOiculoony2]

Keep resting, ive learned you have to re think how you do things. Keep up the good work. Good bless.

[@TheRealRCSparks]

Yes, and thank you Ben. Over the last 5 years.. things have definitely become more challenging. But, I still love sharing my life with you guys. Its like a family that has always been here with me. Thanks bro

[@matthewmann8951]

Sweet, looking good bro. You're all liked up as well.God bless peace my brother

[@Robert-fr7xt]

Can’t wait to see more upgrades and how to’s I’m really curious into getting one as a first time getting into rc

[@chiccorocker]

Great machine indeed, I love the look of it. And it's powerful for being that small!

[@satorrotas]

Excellent upgrade , very good sound !! Really great Dozer !!!

[@whitesandsracing2693]

You guys inspired my and now I have a dozer and a excavator 👍👍

[@longboardguy]

That’s a very cool Dozer rc. The detail in it is amazing. 👍🇨🇦. I work on these for living up north. Really cool toy my friend. Love the hauler also👍

[@brianport3691]

Love the construction rc's you have that dozer is so cool.

[@dprevail5164]

Can't wait for some RC drifting!🤘🤙🤟👊👍

[@rolandjirasek4113]

Hope you are 100% recovered because I would miss your brilliant videos! But health is much, much more important !!! KISSES from VIENNA !!! 👍👍👍

[@danielbrady2979]

Just bought my first rc axial is what I went with!!!! This channel made me choose hope it works out of box exited for tom!!!!

[@TheRealRCSparks]

WOO HOO ! You are going to love it.. Congrats man!

[@michaelthomas3262]

Oh man, i love this Dozer 😍

[@homersimpson6176]

Your blade weathering looks great !

[@pbtvproduktionen]

Cool dozer from RC4WD! Thumbs up!

[@jasonsrcstuff9278]

Glad you’re feeling better brother!!!

[@AllOrNoneR.C.]

Thanks for the new video and sounded pretty good

[@rcmcguyver7561]

Awesome medic I'll be running two of those sound kits in my general Lee cool fozer

[@TheRealRCSparks]

Love the chassis layout, and your tires are AWESOME! Very excited to see what you come up with!

[@rcmcguyver7561]

@@TheRealRCSparks thank you medic

Woooww man, the dozer is really a very good machine and he can do the hard work super well......thumbs up my friend👍👍

[@dennisanstadt1039]

Hey buddy glad your feeling a bit better. I almost have got that wiring kit ive seen it for months.

[@anibalbabilonia1867]

That thing looks and sound sweet man! Awesome 😃👍

[@TheRealRCSparks]

Thank you Anibal, This machine sure is amazing, and powerful!

[@Sn00py748]

So cool! Your the reason I’m in to rc construction and mining! Cool video

[@TheRealRCSparks]

That is awesome!

[@Badgermatt-nc5nr]

Aaron, as usual, an awesome vid on a unique rc. Man I wish I had just a 100th of your cool “toys”. 👍

[@krashkingrc9715]

Those are awesome cool video sweet rig

[@pnwRC.]

Sense ESS one+ is all I've used it & I LOVED it for the Talking TowMater that I did! The Dual+ sounds as if ti produces much more sound than the 1+ does.

[@kylebuchmann8585]

Get well soon 👍 on the video see you in the next one maybe use your dozer to push snow this winter 😉

[@danielternes-dixon5759]

Love these big machines!! Heres a tip for you, if its possible mix the sound kit to increase revs when you use the hydraulics. Just like the real deal.

[@michaelmontgomery6388]

One word, (AWESOME)👍

[@mikec.9979]

Back pain is the worst good to see you around your brain is an encyclopedia of everything rc your videos are the best nobody on your level

[@TheRealRCSparks]

Thanks Mike.. yeah man, Im still all crippled up.. #sucks But, thanks for the well wishes. I hate being away from you guys on KZbin. Ive never missed this much time.. it really is disappointing. I appreciate the support

[@mikec.9979]

@@TheRealRCSparks no worries most important thing is your health for us on KZbin and more importantly your family especially Moe

[@construction101conti5]

I have that dozer and it’s awesome

[@TheRealRCSparks]

Yeah, its truly a work of RC art... its so difficult to express how this is worth every penny. Its heavy, its powerful, and it can pretty much do anything you ask it to.. hah

[@logankempton5743]

Oh my God you have the coolest our season of ever seen I love your videos

[@kevinquinton9838]

have missed you get well soon xx

[@hegotglocks7808]

Love your vids so much ! Keep up !

[@adamhatty426]

Just got the internet back after moving...first place I go is rc sparks! Missed your channel so much! Gotta catch up and like every video I missed! Great video as always 🍻🍻🍻

[@adamhatty426]

Until all your high speed data is used up and your screwed! And yes I know there is unlimited high speed data 😋

[@adamhatty426]

The wife uses that up first....

[@inlikeflynn673]

More of the gold series! Greetings from oz!

[@andyrichey1192]

I Watch all of RC Gold, pretty awesome. Thank you for sharing this video with us that dozer is pretty cool, Think I'll stick to my scale trucks and monster trucks and boat jet boat I'll be watching for more

[@paultro8457]

Hey man good to hear you're feeling a little better. These shop vids are awesome. Always cool to see how these things work. You should keep the fog horn sound on the dozer!!! Haha I thought it sounded pretty cool. Haha great video and as always, you've earned a like click. 👍👍

[@kevinquinton9838]

very nice rig set up , im pynng you tube gold baby xx

[@kevinbreaker2683]

Awesome machine dude😎👍😂🇺🇸🇺🇸

[@BraxxJuventa]

Great video again Aaron! Thank you!

[@TheRealRCSparks]

Braxx, bro.. how are you these days?! Thanks for coming by to check out the film!

[@BraxxJuventa]

I'm fine thank you Aaron. Although I have back problems too. 👍😁

[@Stonely1974]

Sabertooth are good stuff u hv there. Good taste! I use it for robot wars

[@cdubaviation1517]

Any change for some closeups on the 2x32 and a short write up on connections and setup? Greatly appreciated.

[@RCCrawlerz209]

Great lookin' tractor, mack!

[@TheRealRCSparks]

Thanks G1! Crazy how small it looks when beside the Dozer!

[@rookie101_]

So cool! A lot of people don’t realize how much fun these are due to how slow they are!! At first glance they look boring.

[@Darkkiller12ful]

As a car mechanic these connectors are awesome but dont get to close with the flame they can pop

[@TheRealRCSparks]

Thanks for the advice. I havent had that happen.. but can see how it could

[@joellake26]

All I can say is... I for one, am glad you aren’t operating equipment/owning an equipment company.. I probably would have never got into the hobby, if that happened.. You’ve got me hooked on construction related rc now.. my wife, she’s not so sure on the price tags 😂

[@TheRealRCSparks]

excellent.. it is flowing!! The HD eqiupment will catch on... its too cool not too!

[@joellake26]

RCSparks Studio , agreed! These machines are awesome, just like you crazy joe, rook, and slushbox Steve all agreed on in the last KZbin gold Episode.. “it’s just like playing with tonka’s.”

[@knappsterk7414]

AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@abentley911]

Any heat connecter I use steam does a good job and no burn👍

[@jackdaniels5205]

Get a motorcycle chain break tool,and put a flare on each rivet but one (just incase you need to remove the track). That should stop them from backing out on the track.

[@TheRealRCSparks]

much like in full size.. you need to replace track pieces!

[@voododd666]

Really good video. For the cost I'd want it to run on a real small gas motor ?

[@brockriemer1929]

Oh neat!

[@OffRoadLawnMowers]

Excellent vid man.... But you got us hooked on KZbin gold brother. We need morrrrrre! I've told everyone I know about this show at work and we actually talk about the episodes to pass the time away and now.......... Come on fight the weather like Parker would lol jk. I do miss watching though

[@robbrcnstuff4220]

That's cool, can it plow the snow?

[@STEVOD313]

Soon u will be moving some snow with Dino! 👍😎

[@TheRealRCSparks]

I ... cant... escape... SNOW! haha

[@Rcheavyequipment]

Hi bro Very very nice dozer, so real My question is how did you manage to control the dozer tracks with one hand movement stick? Tx

[@ogDoit]

you could use that as a snow plow !!

[@butchgodkin]

Can you do a video of setting up the sabertooth esc to the dozer a quick overview

[@nitetrain7136]

Cool rc dozer. Now you gotta install a Smoke Kit so you have real looking stacks. Do you buy these rc vehicles or do they have to be made? Where to can you buy them if so? Thanks

[@lewiscurnutte1272]

Awesome medic thanks

[@TheRealRCSparks]

Hey Lewis, thank you for commenting. I always enjoy reading comments from folks who see the vids.

[@lewiscurnutte1272]

Your welcome

[@brocksturm4091]

You should build a plow and salter for the mammoth truck

[@kill3rhorsepow3r51]

I drive a scraper and am pushed by a D9T dozer all day

[@Rcheavyequipment]

How did you manage to remove the cab?

[@1988dirk]

Wishing you the best for your back! I have got a question, hopefully you can answer me. I am looking for a construction site model. You own the the wheel loader, the dozer and the excavator. What rc4wd model do you recommend for the most outdoor, garden fun? Unfortunately I can only afford one of them. Thank you!

[@robertrosson1990]

Would be pretty sweet it the sound system could fit under the cowl and then dressed up to look like a engine.with the perferation side panels bet the sound would be even better just a thought

[@markruddle4252]

Did you buy these or build them. If bought do you have a link and if built do you have a how to video.

[@50humpty]

What was your final gold count total for the season?Keep up the good work!

[@lylekehrer6159]

What you now need is a smoke system for them..how was it put - motor toots? I got a kick out of that when Moe said that.

[@TheRealRCSparks]

Diesel Toots! Haha

[@NorthStarDrones]

hope you’re back comes back around,👍🙈

[@communitynetwork4378]

Hey what’s a good remote for a child? Any ideas thanks

[@tyronekohlheim7979]

Can you tell me how to make the engine throttle sound active with both tracks tried splitting at the sec’s but tracks got goofy.

[@liftmys10]

Servonaut SM3 overpowered the stock 4ohm speaker and blew it out i bet. That's what happened to my 870k wheel loader. I upgraded the speaker to an 8ohm, 7watt and sounds much better than the stock 4ohm speaker. Just a thought.

[@southcoastsledders866]

Nice

[@gotshirts2ink]

Those crimpless solder connectors are great if you are not in a bumpy fast environment ie. Vehicles Not Good. I own a car audio shop and what we found it that the solder does not flow into the wires 100% like a normal solder and heatshrink would

[@Jeroen-Engelgeer]

Always nice to see this one. Did something break at the end? I thought i saw parts of the trailer snap of.

[@TheRealRCSparks]

Haha! No my friend, Dirt off of the track came off, and the extra grippy tracks were grabbing the ramps. All good though! What a machine, hey?!

[@00godlovesus]

You're Awesome:)

[@DFDuck55]

Never seen those heat shrink solder things before, pretty cool. You might try using the tip of the flame rather than the center. You won't end up with black soot that way. -- Did I miss an episode showing the final gold weight for the season?

[@TheRealRCSparks]

Nope.. there was a variety of reasons we never finished KZbinGOLD.. partially because we didnt know there was so many folks who enjoyed it! We lost a lot of viewers. But, F*ck em.. Lol! We are hoping to get out one more time before its too cold!! I want to see what we dug up as well!!

[@DFDuck55]

Lost viewers? Eh.. well, if you just did what the average youtube viewer wanted you'd be dumping cold water on yourself, eating hot peppers, and choking on spoons full of cinnamon powder. :>

[@BazilRat]

I love KZbin Gold. I'd also like to know how much you got, and would love to see a season 2 next year.

[@jeremygarrett1984]

Medic I'm back bro, l9ved the minning videos still need some stickers man

[@Luigi-lm9ms]

what a nice rc bulldozer i like to buy that. where to buy that bulldozer

[@construction101conti5]

Awesome

[@construction101conti5]

You guys are the best

[@sephlyon3403]

Ha

[@bryank813]

Are you going to add smoke to it?? That’d be sweet !!

[@justinschmitt4035]

What is the company in Utah that you mention in your video?

[@madmax425]

Please do a update video if you change the sound mode

[@rugger8787]

i would use the dump truck all the time ps what happen to the massive wheel loader you had years a go i want to see it back

[@TheRealRCSparks]

Fatal design flaw in the differential system. Problem: there was no differential. all the time, locked

[@rcsask]

@@TheRealRCSparks would you ever entertain selling it?

[@russellgorham1345]

This is what i like to do when i retire from local 825 operating Engineers

[@DonaldByrd1970]

You know that I am a fan for life Medic, but I think I will just gaze and amaze myself with your dozer at those prices. I WOULD be divorced and left for getting one like Medic. Lol I also was looking hard at your track, is it intended to be that taught with no slack?

[@TheRealRCSparks]

yes, there is a spring load to the track :)

[@artw1962]

Hey Aaron - TOTALLY addicted to your channel. I'm about to order that D10 from RC4WD and would like to have the controls the way you show them in this video. I looked up Sabertooth and was overwhelmed with the choices! Which model did you use?

[@jleverington]

been doing crawler stuff for a while now. I finally got my first Hydraulic Excavator. I was searching for sound options and see you did this in the dozer. You think this sound kit would work well in an excavator? Like would the sound match up and fluctuate correctly? Basically, you think it would work in your 4200XL? I have the Libherr 954. Thanks for your guidance!! big fan of yours!

[@terryperrott9913]

Is that the D8 , D9 or D10 ? In a few weeks Im going to order one . What frisky model of raido are you running? The esc for the drive motor where did you get it? Thank You & I have watched countless hours of your " KZbin Gold" , I love it. Im also thinking of getting the wedico CAT dozer .. Thats a beast ..

[@balrajghatahora8011]

can you list some big tyres

[@craigsrc6205]

Hey big guy have you thought about using a go pro cam? Just so you can have both hands free?. Absolutely love your Channel so awesome

[@TheRealRCSparks]

Craig.. for shame! Of course! But, i like getting good angles.. always have! With a gopro.. its kinda.. meh.. im ok!

[@shanerodgers1009]

The best rc KZbin channel out there in my opinion. But I got to ask medic are you a full time youtuber?

[@TheRealRCSparks]

Hey Shane, thanks for that kind comment. Yes, I have been a full time KZbinr since 2011... What an amazing RC Adventure it is! I'm glad you have been along for the journey. When did you start watching our channel?

[@shanerodgers1009]

@@TheRealRCSparks I started watching in roughly 2012 my first video was a ttc mud bog video and then I went back and watched every ttc video you had posted previously because I was so interested in what you did and how you did it.

[@josephknowlton7246]

Liked, shared and commented 🥃🚜

[@TestECull]

You think glue-on tires would hold on a tri-axle trailer hauling that thing? Or would the trailer need beadlocks?

[@TheRealRCSparks]

I dont even glue my tires, and it pulls it with ease, my friend.. These are aluminums... and I dont see them ever slip. If you go to my videos section, and sort by "views" the top videos have a few of this trailer in action. Really great, Ive had it for years.

[@TestECull]

Mm. Yeah I'm building a trailer of my own and I'm hoping that itt'l be able to carry 40lbs cargo without issue(My benchmark will be a 550cca car battery centered over the tridems). Gonna be pulling it with my CA-10, three axles like your lowboy, on RC4WD Daytons. I'm just worried that sharp turns with a heavy load will debead tires, an issue I've had with the CA-10 itself(Steer tires, in particular, don't want to stay glued on mine, and right now it's got one drive tire that slips on the wheel from time to time), and I'm hesitant to take a chance on $150 worth of wheels that may or may not work.

[@proslot11]

You need to show us how you change out the old hydro oil out to new.

[@TheRealRCSparks]

I have before, Sir :) You just have to undo one hose into a container, and put new hydro oil in the tank at the same time. Super simple!

[@juliohernandez7861]

How much is this 58 LB bulldozer