Both those radiators are pretty bent, that bike was ridden hard. You should re-grease all the bearings and change the oil in the forks and shocks
@Satans_spot2 жыл бұрын
i just subscribed today but have been watching videos for a lil bit. ik alot of people would disagree with me but one day in a video could you tell us how you started in the hustle
@dustin90352 жыл бұрын
Wow, I didn't know the 2018's came with curved radiators. That's sweet!
@DJsGarage2 жыл бұрын
OEM!
@MatthewG_2082 жыл бұрын
You should really spend the time trying to bend those radiators back. Put them on a table or the floor and with a block of wood tap then back plumb. They are soft aluminum and makes it an easy job👍👍
@colemurphy60482 жыл бұрын
If you try and bend them back they could bust open
@shawnmoore56212 жыл бұрын
Just replace them.
@colemurphy60482 жыл бұрын
@@shawnmoore5621 exactly
@lukatomas83892 жыл бұрын
Bro that's dumb see so many people crack them when they do that just spend the money to buy new ones or just run those
@charlesswiger22602 жыл бұрын
Great bike build man loved it 👍
@NOTTApro14211 ай бұрын
That bike has seen better days. But thats the life of a motocross bike.
@Hudson123392 жыл бұрын
I love this video upload schedule
@ianthompson96532 жыл бұрын
I think we all do 😁
@hatedcrf23032 жыл бұрын
loved the video and cant wait for the next one
@ianthompson96532 жыл бұрын
“13 hour bike” … yup
@DJsGarage2 жыл бұрын
I agree
@DanielLopez-fs1xj2 жыл бұрын
I bet it was a beginners bike didn’t know how it worked didn’t use clutch right and probably redlined it alot
@cheto29522 жыл бұрын
Boss A quick look at those radiators. They need replaced bent to hell and back.
@aidenc48792 жыл бұрын
Yo bro I’d love to get started doing what you do your a big inspiration to me. I was just wondering how you find you bikes, like where do you look and on what sites? Thanks bro
@ktmshop Жыл бұрын
you should wash that engine properly before mechanical works, when You assembling new piston dust from that dirty water hose easily goes in to the crankcase.
@gabbysantana242 жыл бұрын
It would be cool if u did a build on a cr500 or kx500
@DJsGarage2 жыл бұрын
Trying to find one!
@braysonriggen55142 жыл бұрын
Hard to find
@DanielLopez-fs1xj2 жыл бұрын
@@DJsGarage there is 3cr500’s in southern colorado one runs ones a parts bike one is mint but needs a rebuild
@MartinRodriguez-sy5dx Жыл бұрын
Nice video bro have an 19! Deff helped I’d like if you’d mention torque specs
@fatsandy2166 Жыл бұрын
rockymoutain has a place in ky to not just utah
@loopeyshooter503 Жыл бұрын
Did you ckeck the ring gap? Forged pistons require more clearance than OEM.
@yzinger98782 жыл бұрын
when selling stuff do you close the garage so they dont know you have other toys?
@DJsGarage2 жыл бұрын
I ussually meet them at a local gas station
@jonthelamb45492 жыл бұрын
I just sold my bike a month or so ago and now I want another lol shoulda just kept it
@johnberry28772 жыл бұрын
Yep ! They are NOT getting easy to find and the prices just keep going up and up 🔥🔥
@jonthelamb45492 жыл бұрын
@@johnberry2877 I’ve found it pretty easy to find a decent bike around for a good price. I think blown up ones cost more and are harder to find becuase people want projects 😂
@TheHemiphil812 жыл бұрын
This is the perfect 450 to do a 450x build on it..
@763GanderGuys2 жыл бұрын
I know your a bike guy, but I wanna see a sport quad like a Raptor 700r, Yfz450r, Trx450r, Trx400ex, Banshee??
@masonwells80252 жыл бұрын
Aluminum brightner the fwak out of the bike
@brockpeck70732 жыл бұрын
Thought the 19's came with black rims. Aftermarket rims?
@demitriblyashuk49412 жыл бұрын
U deserve more subs
@derekconnatser54 Жыл бұрын
Good job bro
@justintaylor98582 жыл бұрын
Did you put actual oil on the clutch side
@Keyssony2 жыл бұрын
It’s Lit 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Bro
@Nick-fm9ux2 жыл бұрын
We're you using any torque specifications?
@laceygreen80872 жыл бұрын
Hey I got a 2019 crf450r and I was curious how much will it take to tear down the engine and is it hard to do.
@shotgunz12482 жыл бұрын
All these new strokes like timing chains and valves pistons some even like to eat the head up where cams lay lol Bike should clean up good
@Henryve33s2 жыл бұрын
What’s good cuh
@shotgunz12482 жыл бұрын
Get a Suzuki Rm125 07 the last one when they done last update on the motors
@DJsGarage2 жыл бұрын
I want one
@shotgunz12482 жыл бұрын
@@DJsGarage I have a 07 cr125r last year and I will not sale it I want a rm also just can’t find one
@B199021332 жыл бұрын
Where are you in SC? I moved down here few months ago. Outside of Charleston
@DJsGarage2 жыл бұрын
Upstate
@Rachwal.Productions2 жыл бұрын
those radiators make me cringe
@DJsGarage2 жыл бұрын
Same haha
@gahvin39902 жыл бұрын
If you weren’t so far from me I’d buy it from u😂 but I got a 2012 rmz250 that has the same ticking noise this did you think I should do the timing chain or what do you you think it is on a rmz250 😂🙏🏼🙏🏼 all the rmz250s you had didn’t make the noice mine does😒😂
@bradlycriswell19902 жыл бұрын
cant believe how clapped out that bike was being as new as it is. Whoever owned it, gave two fucks about it.
@user-nw7kf6nl2y2 жыл бұрын
great content as always
@unidentifiable61522 жыл бұрын
Is it just me or are half the dirtbike sim the world in South Carolina
@DJsGarage2 жыл бұрын
Uhhhhhhhh idk
@guadalupepulido29782 жыл бұрын
Like your video question how do you advertise your bike for sale
@DJsGarage2 жыл бұрын
Facebook
@nick_37712 жыл бұрын
Support RUMBLE!
@zexymf54402 жыл бұрын
how do we buy these?
@augieh61462 жыл бұрын
Holy fuck that bike was used look at the rads
@MrNz962 жыл бұрын
How do you know which piston size to put in the bike?
@DJsGarage2 жыл бұрын
Dial caliper
@DoorTap2 жыл бұрын
man I dont know how so many people in your area treat their bikes so bad lmao, I just got my 2022 crf450 and planning on making it last 4-5 years, have no idea how those people clap out new bikes so fast or wash them at all lmao have yet to seen a clean bike when you pick them up
@DJsGarage2 жыл бұрын
My 2021 yz125 was pretty clapped out too😹😹
@DoorTap2 жыл бұрын
@@DJsGarage they just dont care apparently lmao
@Hudson123392 жыл бұрын
How much did you get/sell the rzr for?
@DJsGarage2 жыл бұрын
Paid 5 sold for 7.5
@meriadhaliti2 жыл бұрын
Dj Garage Why Cr 125 1993 keep scraching My piston I ride only 3 Time and it blow up it blow up 2 brand new piston only 2 hours in it so can you help me fix the problem
@ste75902 жыл бұрын
U probably need new cylinder or crankshaft
@RileyMcElwain2 жыл бұрын
You may have put the rings in the wrong way or your pistons may be the wrong size or your cylinder is bad causing it to blow up
@highlightzilla95812 жыл бұрын
Cranks probably bent
@DJsGarage2 жыл бұрын
Could be big bore cylinder with stock power valves?
@meriadhaliti2 жыл бұрын
@@DJsGarage Cylinder is stock size the bike is all servise with Wosner The cylinder is brand new no scraching and the cranks is new is all service top and
@low-key-vibing49792 жыл бұрын
Would you want to buy my 2016 Yamaha yz 250F it’s seized and clapped from a wreck I got in (3,000)
@DJsGarage2 жыл бұрын
Maybe. Where you located
@low-key-vibing49792 жыл бұрын
@@DJsGarage Washington I was wondering if you wanted to cause I have to go over their to a friends anyway
@Ucrane3462 жыл бұрын
How much
@DJsGarage2 жыл бұрын
5k 💰
@BMBradyy2 жыл бұрын
@@DJsGarage I’d give you 4750 is it titled ?
@jex80462 жыл бұрын
RM125 :):);)
@tiana52712 жыл бұрын
I found a 2006 crf450 for only $2000
@chrisanderson47482 жыл бұрын
Sell me this bike!! Mine got stolen, from Fayetteville
@johnberry28772 жыл бұрын
I hope the scumbag who stole it gets stomped by the bike !! Worthless dirt bags won’t work for their stuff 🤬🤬🤬🤬! My buddy got his stolen right out of back of his truck. The rear wheel was chained to the swing arm and they literally dragged it and carried it for miles before it was trucked away! However, he did put his birth month and year on the number plates. Well , he put out a add on Craig’s list and the ass hat who stole it rode it around before removing the numbers and he was turned in by an old dirt biker down his road ! Thankfully he got his bike back within a couple days and the perp was arrested. It always a good idea to put numbers on your plates regardless if you race or not !
@weekendwarrior62852 жыл бұрын
Sealant job on the cam cover would be enough to put me off buying the bike... sorry 😆