Budget Bogger Ep. 4. Installing The BIGGEST Tires We Could Find... Will They Fit? +Cleetus Payback!

[@JHDieseland4X4]

The giveaway winner will be chosen and announced in the next couple weeks!!! Just FYI to anybody that’s curious!!

[@trocheadventures]

Hell yeah ! Been so excited to see who wins, praying it’s me 🙏

[@TaipanPete.]

i know how notorious the 6.0 are for issues when tuned up but if taken care of and left stock how are they?? i've heard mixed opinions i would like yours brother

[@L4T3R_Racing]

I hope my single shirt I bought wins. Lmao. 😂

[@Sycoformallyargo]

Its coming Home with me😅😅

[@H.E.outdoors]

Put portal axles on it

[@realkilju]

The $10k budget build is now done, I think its now fine if you go over the budget👍 Continuing this build would make for some good content

[@dugwillis84]

Yah it needs gears

[@mafia631]

Just to be clear.... You won on cleets tow truck video.... No questions asked... I knew you had no intention of going to culvers..... you towing the raptor was epic!!!

[@anthonyestevez118]

Now it's a bogger!! 44" Super Swampers were all the rage back in the late 90s. Love the build!

[@clittle1559]

yes sir 44s was equivalent to 10 sec in the 1/4 your just balls to the wall 🤘🏾

[@wizza2315]

No! You can't stop the content on the budget build F250 PowerStroke 6.0 this project is my favorite of all time and it's something us blue collar fellas can relate with! How about that 6.0 turning and burning those big heavy 44's ! This project has turned into a real unit!💪🏻🇺🇸🔥

[@chriskron2512]

JH is my spirit Animal! The guy is just so unassuming yet, so genuine, and just really wants to one up his buddies in the best of ways! Never underestimate him either! The Raptor on the roll back.... EPIC!!! This low budget build?.... Again EPIC!!! JH and team Splendid!!

[@rickysmith8810]

Dont forget the cummins square

[@lamarzimmermanmennonitefar5269]

I met him last year at UCC, chill dude😅. I didn't know what the heck to say😅

[@glamisfanatic]

For the problem with it not coming out of 4Lo, check the relays under the hood, there are (2) relays on the driver side, right beside the battery under a little cover. Mine got stuck in 4low in Glamis and moving those around / swapping them fixed it.

[@johnrichardson82]

Some older trucker just plugging and unplugging helps with better connections

[@coltonhaagen7790]

JH vids have just been getting better and better

[@floridaripper817]

Trucks a ripper and you guys messing with cleet and back and forth is awsome

[@Ocboy420]

I thought Cleet & squirrel was gonna flip that 78 Chevy off their tow truck 😂 I could tell Justin was getting mad. I’d be too nervous for I was the one doing all the work

[@EasyBakinX]

Squirrel strapped it down by the brake line, it wasn't going anywhere 😂

[@jasonbell1698]

i’ve noticed justin is a bit too responsible for the crowd he hangs around 😂

[@GK-gr2mx]

Cleet was upset when he saw the raptor r rolling in 😂

[@eriklarson9137]

@@jasonbell1698 They will all get a good laugh out of this one.

[@JayGee6996]

Smashing the videos at the moment, not even Cleeter can’t keep up!!

[@boogball4699]

prolly gonna be camping out and doing acid out behind your shop this weekend, come out and say hi!

[@SCARFACE69247]

I'll be that weird thing out in the distance.

[@blakecaruso7513]

Bet you won't 😂

[@pinstripingbybear.]

@8:00 so JH got the MAC DADDY minus the storage cabinet 🗄️ so this setup is $8500.00 and if he got it with a empty storage cabinet it would be $10,300.00 and it doesn't come with shipping it has to be shipped in freight at three different pallets so another 2k

[@jaredbirch3096]

Bro you driving over the tress was the best. 😂😂 your content is so great. Its awesome seeing someone else love doing the same stuff i like to do

[@danbohn7285]

Man that's a classic looking Florida mud truck.

[@mahogany3947]

Dude I love your channel I got kind of burnt out watching cleetus McFarland and I come upon your Channel, and that was yesterday I've been binge-watching ever since

[@rikrocket4618]

Let's go JH respect to you and Justin watching from England UK keep at it your crushing it 👍😎👌💪

[@daltonpoteete8669]

Y’all got me looking for 6.0 on marketplace. 🤣🤣 love this build. It’s been cool seeing the transformation. Looks like a beast!

[@wizza2315]

Same here bro! Been looking around on FB marketplace for two weeks now!

[@eriklarson9137]

GREAT engines! Hope you like doing head gaskets.

[@diamond_industries]

This build is pretty sweet! Just right. Fun looking ride!!!

[@DanielandHannahBlack]

That’s thing is a solid ripper I love it!! It definitely spun on the wheel it was smokin in the video

[@theprostipimp]

Hell yea, this 6.0 mud truck content is 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@wizza2315]

Facts💯

[@eriklarson9137]

RIGHT?? Without a 6.0 all of that stuff would be pointless.

[@BAADAPPLE]

Love when a JH vid drops right as I pull my 3g into the shop to work on it!!

[@eriklarson9137]

I like my Jx3 much better.

[@johnschocke6062]

Once you get a taste of mud bogging it is hard to kick keep the mud content coming 🤘 and if you can try to find a black Pete swamp and see how it does 💪🏻

[@rebel9838]

A lot of tire manufacturers measure the size to the tread but some measure up to the tread meaning they are bigger than stated. It's usually atv/utv tire manufacturers that measure up to the tread.

[@720shawn]

Glad to see Kai on the channel he works hard

[@Luckyj1s]

Dang I love that Truck!! You have 2 of my favorite achievable Trucks on the Tube!! Loving the content of late! You guys work Great together! (J.H. & Justin)

[@1979augistine]

Definitely gonna be needing some ladder bars to help with axle roll with that lift and tires not to mention the ladder bars will definitely help with driveshaft and ujoints life expectancy.

[@BLSdesigns]

Such 90s vibes!! 44 boggers just look so right!

[@bradleymadosh911]

Nice tires and rims give any vehicle a better look. I like the Super swamper STL tires. They are good tire. Have some 36 and 38's

[@McCanicScot]

Shackle flip on the rear, and maybe a wedge on the axle. Maybe custom fabed shackles. Looks nice, nothing but tire! Put a piece of cold rolled bar stock in the middle of the shackle for rigidity! Drill holes in the middle of the flat bars, for the bar stock to fit in, you can drill, tap use a bolt, or just weld it together! Better and cheaper than using a block.

[@Justin87GN]

"I'm immune to it I bathe in that!" 🤣🤣 Truck looks badass on the 44s

[@davodinkum9090]

Tyres are much like clothing or shoes. There is no standard size chart established, so each manufacturer is able to make their own mind up on what their size charts are like.

[@KJ-kw7gh]

Hey Justin, love the builds and content. One question sort of off subject, but I believe you live pretty close to Cleetus and the FF, and the drag strip. How will the new housing developments affect you and your business and recreational past times? Thanks again.

[@hotrod6919]

Lol! i used to run 38s with a leveling kit also. I just trimmed a lil off the plastic piece under my front bumper. But IDK about them boggers. I once bought a 77' f100 with 44' super swampers at the auction. Took it to a house party that night but that thing bounced so bad I had to take all 3 lanes on the interstate. That was the scariest thing i ever drivenin my life.

[@calvineaton8261]

Two good looking trucks back to back!

[@stevenraymer6682]

Brother I absolutely love the bigger 6.0 truck. Thanks guys

[@JoeJoe-bz9nb]

Had a problem with my 06 and it ended up being the relay was weak and wouldnt make solid contact enough to trigger the electric motor to shift the Tcase

[@xXnick916Xx]

I love the budget bogger! I had a 99 F250 in high school and this was exactly what I wanted it to look like too bad I didnt have the $$ to do it back then almost 15 yrs ago. Still dont have it to throw around but im working on it lol

[@chrispollock6966]

Looks awesome. Reminds me of my old school stompers from childhood. Well done guys.

[@meanf1502]

Measure from the center of your wheel to the ground an that will tell you the true size of your my 37 hybrid tires are 37, and they come in at 36 1/2

[@BenjySparky]

JH and Justin, y'all rock! Loved ot when Cleet was over at your place repo'n you're square body, abd then you pulled up with his Raptor on a rollback😂. Wash my truck for me plz. Peace

[@Shayne2000Focus]

F250 Megaduty. Love the build!

[@mk-jf1ux]

u might be missing an inch in tread. But I had fun with a jeep with 40 spanked swampers on super single 12” deep 8 lugs. suburban 1 ton axles and custom leafs. tbi350 with t400. my rear drive shaft was short, custom. jeep it did wheelies. went wirh cherry bombs turned out in front of the wheels.

[@Hackjob101]

can you convert the 03 to a coil and radius arm suspension? that would be sick to do to my truck.

[@masonmcnabb2429]

Seen that 99-02 chevy next to the 6.blow, did you guys relocate coilpacks and wires to run the hoodstacks?

[@sinistervulcan]

Grill and headlight swap would look on there. Also down the line, might need some beadlocks

[@dLikesDDs]

did ya check the 2 relays by drivers battery? one shifts the t case from 2wd-4hi-4low, the other relay shifts it from 4lo-4hi-2wd. its pretty common for them to shit the bed on these 6.0s

[@christianshadrick1150]

So stoked for this build,now time to get Cleeter back in the mud

[@Floridiots]

Justins constant voice of reason makes me lose it. lmao

[@JHDieseland4X4]

He definitely prevents us from making bad decisions…. Lmao

[@rippinnslippin473]

Everyone needs a guy like that around. Knows when to really say something and when to sit back and watch lol

[@shoutingatclouds1050]

Without beadlocks, the rim will spin loose of the tire. And if your turning at the same time, well you will see. If the truck is weak and can't burn out those tires you probably have nothing to worry about.

[@lifebeginsat190]

back up...apply brake put truck in neutral...switch out of 4l to 2 wheel.. wait a minute'''back up again....put in drive...youre now in 2w

[@brettlyjonesin]

Sounds like there is just enough budget left for a body lift kit... 🤷‍♂️ extra 3" never hurt lol

[@krisbarnard1684]

Safe bet the welded diff broke seeing how you guys did it. Those enclosed carriers need to be pulled apart and welded the same way as a 14 bolt

[@bearfoot25]

It is true for the most part that the tires don't measure up to their actual size, however my 36x13.50.15 IROK bias ply's measure out to 36.7"

[@aleks_jones]

the only way to bog on a budget is to bring the beers and watch everyone else break their trucks. might be 10k for initial build but how much $ in parts do you break every time out?

[@GECAdventures]

That is a bad ass truck!!! I have an 03 but haven’t done anything with it.

[@Justin.sxsblog]

If you need more lift, all you gotta do is stack hockey pucks under your cab mounts!

[@Dbessette93]

Jh behind the wheel of a 6.0 is magical

[@nate4686]

change the 4x4 solenoid, my truck used to get stuck in low a lot. or the actuator

[@micah119]

Ive said it before and ill say it again,boggers make everything look better. Looks awesome guys!!

[@grahamak22]

you can see it when peeled out on cleetus...looks like the tire spinning on rim..love ya.

[@Arcturuseyes]

Some big paddle tires in the back would be awesome, prob the axle will be done-zo though...

[@CamperCruzin]

You guys are awesome! Love the build make me proud owning a truck in general

[@raymondlitalien2888]

You should do some time lapses I love watching what you guys do

[@TreySimpson-g3k]

Time for some 2.5 tons and ag tires next!

[@trevor2164]

We love the build!!! but only like 5 sec of the lift install??? Were out here trying to learn from the GOAT!!! 😅😂

[@Guesswho69650]

Thank you for pulling my name for the truck.

[@zacharyman9159]

Y’all can get him at the track or something. It just can tell they are best friends. Real great friends. I like when they do the funny stuff

[@hopperrivas6025]

I seen this truck today and it’s nice the video does no justice it looks good

[@TrevDoggTV]

YES I SAID THIS CORRECTLY: So cool that JH can separate work and work so well. He was scared about it at first but it definitely worked out

[@turbocateyeS475]

Nitto ridge grapplers are true to size. Venom tires are probably the worst tho. Their 35x15.50 is basically a 33

[@JustinmWhitman]

Justin’s new mud truck to go along with the burn out truck????

[@jasonlyijnen84]

J.H. who landscaping here to help

[@clayboist]

Get a tire groover and go to town on those boggers! You wanna talk about weight savings?! Thats just an added bonus.

[@colbymurray847]

My 42x15 pit bull rockers measure true to size. I love it

[@WS1_AUTOS_N_STUFF]

🤘🤩🤘I’m pretty sure they’re probably a true 44 considering they are missing about 2” of rubber

[@budlightner6658]

That's great j.h love the fun guys

[@bobbyholler9073]

I'm so stoked that you beat cleet at his own game! I was rolling🤣

[@97_12valve]

i agree with that guy👇 i think continuing the build making it a mega truck but bidgetish, but make it between the mega truck and mega truck race truck size!!

[@mcmillan1963]

The brown burnout was awesome!

[@mahogany3947]

I'm all about the budget Bogger that's my favorite so far

[@ni_wink84]

That’s one heck of a rototiller you fellas got there

[@DylanMartinRacing]

JH & Cleetus together is like Napoleon Dynamite & Pedro

[@christopherwedemeyer2993]

Ol' JH talking bout his budget build with the Snap-On truck waiting for its pound of flesh....

[@rusted_dreams710]

Should totally get a set of amp steps for it 🤙🏻💪🏻😎 an a front bumper with a winch

[@TurboLSRanger]

Snap on truck in the background... budget intact 😂😂😂

[@tennesseebankfisherman7695]

Axles should hold I know they do in jeep cherokees but you do have more horse torques

[@jeremyjoyce8637]

Love some JH Cleeter payback. He still owes ya $8000. 😂Keep stepping up ya game. 👍

[@christianshadrick1150]

Hey JH who's mud truck was that in the other bay?

[@stitches743]

Just for fun I wanna see a big turbo and injectors an a little motor work lol

[@brianhowe4875]

Damn, ol Cleet tossed Zack right under the wheels of that SD…guess his ride is next lol

[@hemitruckin]

Love this truck. Great job.

[@Rebar77_real]

Gonna need a bigger truck for those larger trees back there! xD

[@KalebJanko]

what a truck, love this series

[@napieraustin]

Perfect timing every time 🔥💨

[@mjmcomputers]

Growing up did your toys last past Christmas Day?

[@emanuelbrister5903]

Beautiful truck, the Ford.

[@__KNOX__]

Jh ur production, videos in general and content just keeps getting better and better. Come On Share these vids, tell a friend, this channel should and needs to be bigger man

[@eriklarson9137]

Then you will complain that it's too big, and you don't feel like you know him any longer. Lol.

[@banditgrizzy1955]

Yep definitely spun on the bead. LOCKEM IN. Then you can break the axle😂😂😂👍

[@FORDLYFAOTEAROA]

Solis dose of disrespect dished out there,good shit 🤣