Do It Yourself a motion platform simulator 3 DOF with Arduino Simtools (Simulateur dynamique)

[@benjaminkobi9288]

C'est extrêmement rare que je commente une vidéo mais la je n'ai pas le choix, je me dois de te dire bravo pour le travail accompli ! Vraiment magnifique !!

[@playsimulator07]

merci

[@playsimulator07]

Hello, In a first time, I would like to apologize for my late response. I receive a lot of emails following my KZbin video. 😀 Thank YOU !!!!!! 🙏🙏 A lot of people request me: - The mechanical drawings - The electrical diagrams - The software So I thought about a solution which will allow me to continue the development of the simulator and to continue to propose you always better solutions. You will have as soon as possible for 🌟FREE ACCESS🌟 in downloading at: - To the list of Built Of Material of the mechanical parts - To the electrical diagram.

[@dennisgerding9489]

Do you know when this will be available?

[@masrurumarov4579]

Hello! Great Work! Any News about Access?

[@clementjacquemin3980]

J’ai vraiment hâte que ce soit disponible !

[@mikealliu3444]

Thank you so much for sharing. I think this is every boys’ dream mention sim system. But I know I don’t have enough engineering knowledge to build one from beginning, so I am so excited for waiting you diagrams. Thank you so much

[@KjllShot]

Hello I'm looking for help with a simulator idea i have but i don't have the knowledge to program it, i am able to build it but i just don't know were to start with how to program it, it will be primarily designed as an aircraft simulator chair with a very unique aspect that i believe will give it the added edge over even a 6 dof simulator using only 2 dof, id very much appreciate anything you can tell me about where to go or where look up how to wire up and how to program a sim seat to work directly off the *g force* data of each game your playing, thank you for your time. Regards Josh

[@Wildavismedia]

Best diy motion rig on KZbin! Nice work!

[@playsimulator07]

Thank you !

[@BallestaRacing]

I LOVE how aesthetically looks. A very careful aspect. Bravo

[@ruokeren1919]

From a former fitter /machinist excellent work but really outside the scope of the “average” person in both machinery needed to do the fabrications, electronics, ability and know how. Your rig is bordering on a professional platform worthy of mass production, not a one off. I can’t even buy some of the products you’ve used in my host country to build this. But again bravo for your efforts.

[@playsimulator07]

thank you very much, it makes me extremely happy

[@fly360]

Minute 03:15: Happy man 🙂 Your face speaks for your sim rig!

[@ilyadurnev5586]

I made AC motor 2DOF motion platform with total 1500W power. But I rarely play Dirt rally because it doesn't implement turn acceleration. I prefer AC, ACC and Project cars. AC however has very dirty acceleration outputs that need to be filtered and therefore I have some extra delay. Also, my setup is very compact and it can be desassembled and I only use VR. I am very impressed how solid and firm your design really is

[@IAmTheSupremeEmperorOfFails]

I’m trying to make my own but not sure what parts I should be buying

[@kartmaan1]

Magnifique, très pro comme dit précédemment, digne de l Aéronautique.

[@MXb7R]

It is an open project? Can you share the components, connections, electronics, mechanical diagrams? Is there any kind of step-by step guide?

[@MetaversoJuliXR]

I want too.

[@playsimulator07]

@@MetaversoJuliXR notiguan.wixsite.com/playsimulator

[@denyskocherha3620]

@@playsimulator07 how much cost the ready project for delivery ?

[@motokwok]

Great job ! Can you please explain or share electronics parts and the solidworks files for this? (schema, component, connection etc.)

[@denisehaddou1844]

Superbe hélas peu de réponses apportées à ceux qui s intéressent à votre realisation

[@路人甲-g9s]

Super clean, beautiful and solid build ! Awesome

[@kzar42]

What a fantastic job you did on that! Thanks for sharing!

[@julienarnault935]

Quel travail de dingue !! Bravo a toi 👏👏👌

[@pamadell1]

Very good. Congratulations on the project. It was magnificent.

[@TheKimce]

Excellent work! Very nice looking design. Just perfect. I would try also if I had tools, space, time and knowledge. So I just build it in my head 😅

[@sevenfifty7650]

Great job!! I feel the phrase “Do It Yourself” is insufficient and is limited to supplies/hardware you can buy at your local shop. This right here, what you made, should be called “Manufacture It Yourself” or like “Lathe It Yourself”... Something that captures the essence of amount of skill and resources you need to build this awesome DOF rig

[@carlosvillasana7419]

Amazing job. Congratulations!!!

[@grehenlock]

trés chouette et de trés nombreuse d'heure de taf et de recherche félicitation

[@luisoo89]

Hello!!! One question! What is the material of the cranks, spacers and green arms? Alloy 6061? Alloy 7075? Steel?? Which material could be good for keep all that heavy weigth?? Thanks!! Amazing project🎉🎉

[@palmeza]

Super boulot ! Et c'est très propre !! Bravo :)

[@eduardocruces3030]

amazing simulator keep uploading the videos!!!

[@McNificoTube]

Love how compact it's!! And feel to work so good. Great jobs! I think that add a fourth motor for rotation must be awesome. Website is not working. Are there somewhere the documentation to DYI? Thanks!

[@playsimulator07]

no, sorry my website is down thank you very much for your message it makes me extremely happy sorry again about my website

[@jeffhoms3634]

bonjour et bravo pour ce projet. je fait des recherches de renseigneents pour realiser 1 simulateur dynamique. donc, vous avez fait le programme de la carte arduino qui commande les servo driver. y a t'il un protocole des commandes emise par arduino vers les servo driver ? car j'ai cru comprendre que ces commandes ne sont pas normalisées ? est ce que vous avez de la documentation la dessus ??

[@ji3200]

can RSRBR 2021 or any of the previous version works with Simtools or SimRacing Studio software for motion simulator?

[@arthurkubrick949]

Bravo pour ta superbe réalisation ! Je suis en train de concevoir un 3DOF heave avec bras de levier moi aussi et tu m'inspire beaucoup. Tu as pensé à commercialiser le tient ? Je me demande s'il y a un marché pour les 3DOF de ce type car j'ai l'impression (de ce que j'ai lu ou vu seulement) que les simracers préfèrent la TL à l'arrière ou carrément les 6DOF. En tout cas je te souhaite plein de réussite ! (Perso je pense que je préférais acheter un 3DOF comme le tient plutôt qu'un 6 trop compliqué et laborieux à programmer)

[@SimRacingPakistan]

Brilliant! just wishing if some of us could have all that time also to do this also

[@playsimulator07]

Thanks you

[@patriceclayette538]

Travail juste parfait. Bravo pour la qualité de cette réalisation. Pourrait-on avoir une idée du budget final ? Merci par avance

[@anassakaria]

Crazy! i wana make one too but i have no skills in mechanical engineering :( and its so expensive if you choose to go for buying one.

[@hellboys3868]

bonjour tout d'abord super travaille serais t'il possible d'avoir les ref des composent électronique que tu a utiliser ??? ou si tu a un fichier globale pour pouvoir le reproduire merci. encore bravo c'est un travaille de malade

[@tomasjelinek3625]

Great job, amazing nice, functional and still simply design. Thanks for inspiration.

[@loic443201982]

Bonjour j’adore votre simulateur. J’ai comme projet d’en fabriquer un. Serais t’il possible d’avoir des renseignements sur sa conception ?

[@playsimulator07]

Bonjour, Je vous invite à lire le post juste en dessous. Si besoin de plus de renseignements vous pouvez m'envoyer un mail à [e-mail]

[@jonhowe3951]

Hi, fantastic build! I was trying to look at the link to the shop for parts list, wiring diagrans etc, but it seems to be broken... Any current links or ability to access further info? Thanks 🙏

[@playsimulator07]

Hello, You can contact me by mail, [e-mail]

[@assamita81]

Bon jour monsieur! This rig is amazing. I would love to build it myself, but the website in the description doesn't work. Is there any chance you can share the build dimensions, materials, etc?

[@WopeX98]

Amazing work, do I need experience to assemble it if I had the blueprint? Also what would be the price for the materials that you used also?

[@WopeX98]

I literally never built anything using any electronics. my engenieering skills are 0 so thats why Im worried even if I buy materials that it would be impossible to make it

[@vinsunexd]

Salut franchement ton travail fait très pro. Où a tu acheter les blocs reducteurs et quelle ratio ils ont ?

[@astromechanika2334]

Hi, what software did you use?

[@hariassoberon]

Hey, your web page is out if service... Your sim looks amazing is there any way I can download the plans and diagrams???

[@Gubbjaevel]

so cool nice work.

[@tiagofinn8960]

Meus parabéns , lindo projeto e o mais louvável é vc colocar os parâmetros de construção para que assim outros possam se basear . Muito bom , parabéns novamente.

[@colinaden2844]

InstaBlaster...

[@kevrev7]

Hi, the motor link you provided doesn’t work. Please share an updated link and the motor name.

[@Cyberdyne_research]

this is whats called a "pro gamer move"

[@anasnaze]

it is really good. well done .How much did it cost?

[@gotifan]

That is so dope!

[@playsimulator07]

thanks 😁

[@paintguy5880]

What gearboxes did you used?

[@redouanez7002]

1:60

[@btscrcistjuniencrci817]

Bonjour, merci pour cette superbe vidéo! Elle nous à beaucoup servi pour réaliser notre simulateur, pourriez-vous nous conseiller pour les réglages des 3axes, on voudrait améliorer les sensations au niveau du lacet. Merci encore bravo.

[@squishiicreeper]

Hi do you maybe have a wiring diagram amd parts list?

[@playsimulator07]

available in the shop www.playsimulator.fr/

[@sebastiensalvat7574]

Hello, can i have the electrical plan please with the mark of motors ?

[@FunnGer]

Wow, amazing job! If it's not a secret, can you say how much is it in raw raw parts (without wheel stuff, service for CNC, your time etc)? I've love to pay you for your work, but whats other costs?

[@6abdelaziz]

I really love it, please howmuch would cost me all this ? If I follow exactly step by step your model?

[@CKYCorp]

PARFAIT !!! Ce qu'on attendait d'accessible enfin. Avec mon père on aimerait s'en fabriquer un aussi; tu n'aurais pas deux trois conseils pour le choix des moteurs et réducteurs stp ?? Si tu peux nous faire une petite nomenclature, j'ai vu que le site en lien est fermé. Très Beau boulot encore. Bonne Simu : )

[@rush2513]

the feel is realistic or like over reactive?

[@calebaguilar1687]

It's look aweeesome, How long did it take you to do it?

[@playsimulator07]

It took me about 1 year from modelling to construction.

[@westcolera7127]

Really good job. Can you explain or share electronics parts (schema, component, connection etc.)

[@playsimulator07]

Send me an email [e-mail]

[@kixstartter6560]

@@playsimulator07 can I also have the schemes, components, connections the programs..

[@tibijczyktv77]

Masterpiece man!!! Shipping to Poland available and how much it costs?

[@nettraveller81]

Is it possible to adapt this platform for aircraft simulators?

[@pedrofelizardo4393]

hello, does the arduino resist? do you have the complete design of this item? you sell?

[@KAPOLDAGAMING]

Very nice...

[@richardbright.5265]

Good job mate, what motors did you use, Nema 34 servo motor?

[@playsimulator07]

Brushless motor 1KW LEADSHINE

[@TnInventor]

this is insane , i want one .....

[@playsimulator07]

notiguan.wixsite.com/playsimulator

[@definedillusions9006]

amazing setup, but i did notice you are not running 3dof or am i mistaken

[@kasir8885]

Wooow le travail effectué est au top, jusqu'à la finition chapeaux 😁 j'aimerais beaucoup quelques choses de similaire, niveau budget faut compter environ combien sans le volant pour un tel projet ?

[@hjoore]

Amazing sim! I want to build a similar motion platform for my racing sim, how much did the motion platform cost?

[@DreamGrowls]

Beautiful

[@boywilmsen3067]

Very nice build man! Too bad I dont have a CNC :D Just wondering, specially with drifting, dont you miss the yaw? Or am I missing something? I just started to really into looking building one myself and Im seeing so many options of doing it... Somehow I also like that D-Box setup, but I think that is also missing yaw....But I could be wrong :)

[@gradyblair1790]

Yeah that's what I was thinking. Wouldn't this only be 2 dof. 3 dof is usually pitch, roll and yaw. I suppose it is 3 dof since it seems to have pitch,roll and heave.

[@3nox2]

Bjr, TOP! qu'elle est la ref du moteur et du reducteur? Merci,,

[@redouanez7002]

Moteur 3.2Nm servo, reducteur 1:60

[@praveendhiman16]

Hi nice project can you share arduino code and electronics compnant specs

[@osvaldaigner361]

I want too

[@osvaldaigner361]

The arduíno code

[@praveendhiman16]

Hi share arduino code and all electronics I am ready to pay for the same

[@laiwahwah1552]

Hi there I would like to know how do you connecting the arduino up and use of code with the motors. how may I contact you? email or signal app?

[@sebastiensalvat7574]

Bonjour. Auriez vous la ref des moteur svp?

[@ashaika6441]

Great job !

[@exxicom]

Super Cool

[@Kellanrm]

say i wanted you to fabricate some of the trickier parts? I could do the frame but i don't have a lot of those routing tools, etc. Would you be interested in taking that on for fair compensation?

[@playsimulator07]

Hello, You can contact me by mail, [e-mail]

[@willyt5]

The Project is still available? I can't access the link.

[@playsimulator07]

Hello, You can contact me by mail, [e-mail]

[@benjiebarker]

Your site is down…where can we purchase?

[@playsimulator07]

Hello, You can contact me by mail, [e-mail]

[@paridepantaleo5219]

How much did you spend?

[@SaintAngerFTW]

Motor config please ?

[@usedfailure]

hi, can i use arduino uno for this?

[@playsimulator07]

yes

[@francescopisciella1765]

If you have Money for the tools to make this staff, i could buy 3 dynamics cockpit, nice project aniway

[@playsimulator07]

thank you for your comment, yes you can buy these dynamic engines, if you want to build your own simulator I wish you success.

[@alessandroyak54]

Top o projeto parabéns

[@madhunugg]

Can you please share the solidworks files for this?

[@playsimulator07]

Send me an email [e-mail]

[@cac93lun]

@@playsimulator07 Hello, your work is really amazing. It's hard to imagine. Can you send me your wire diagram? [e-mail] and what motor model do you use? I look forward to your reply

[@web-network]

Ca sent le gars qui travaille en mécanique ça, vu la qualité des pièces usinés ^^ Beau travail en tout cas. J'en suis à la conception moi, je me tâte entre le choix des moteurs, tu aurais un conseil sur ce sujet ?

[@playsimulator07]

JE PEUX QUE TE CONSEILLER DE PRENDRE DES SERVOS MOTEUR

[@web-network]

@@playsimulator07 Effectivement, c'est un bon choix. J'ai passé l'étape maquette, et j'ai conçu la structure générale du simulateur. Par contre j'ai du mal à choisir quel servomoteur utiliser en terme de puissance. Pouvez-vous me dire les caractéristiques des votre si ça vous dérange pas ? Merci d'avance

[@honoroffofficial853]

voll coolen Simulator )

[@fabiomendonca4015]

Legal!

[@LeBonJeuxDuGeek]

comment ous contacter ?

[@TheInsaneupsdriver]

only thing i got left to build....

[@ReplyNI]

DIY?? I’d need to have an engineering degree to make one of them lol

[@mynameisprivate158]

watch this guys video kzbin.info/www/bejne/qJelamafhciErM0 he shows a real DIY project that an average person could build.

[@WilsonBradleyTheOfficial]

Website gone... Sad.

[@playsimulator07]

I know, I'm working on it right now

[@user-vz6xr1kp7b]

👍

[@nathaelchinigioli57]

Hi. Very Good. You would be able to create it on commission. I would like to buy it for you.

[@playsimulator07]

Hello, You can contact me by mail, [e-mail]

[@frankmunoz8740]

Great job I sent an email but no response??

[@TitaniumDR1]

DIY....for a mechanical engineer with access to giant milling machines. Nice build though.

[@ericsonyamaro9062]

wow.

[@ISMAELPLAY1]

TODO muy bonito pero sacaran algo alguna vez que no cueste una burrada

[@WilsonBradleyTheOfficial]

How Says DIY , but not sharing info.. I would buy one if the price wasn't stupid..

[@Chinsoup]

Aww links broke 😢

[@playsimulator07]

Hello, You can contact me by mail, [e-mail]

[@michaelmccallin2979]

diy with an engineering fitted out workshop

[@januardwiharisandy9719]

😊

[@mikeallen5291]

because we all have and can afford CNC equipment. cheaper to buy one, yet again

[@StringTone-t6v]

Lakoni lakoni sak matine nyowomu lakoni....

[@erock.steady]

that is a sexy BEAST..!